![]() |
||
Oil / Grease | ||
![]() IOS-01 PRO OIL Oil for spool bearings. One drop of the water can make a difference in winding comfort and flying distance. |
![]() IOS-02 PRO OIL Maintenance oil. It is a very high viscosity oil. |
|
![]() IOS-007 PRO OIL Perfect for bait finesse! The ultimate ultra-low viscosity reel oil. |
||
![]() IOS GEAR GREASE Ultimate gear familiarity performance! Here's to the overhaul! |
![]() IOS DRAG GREASE "SIROKUMA" Special grease for drag washers. Spinning drags are changing performance! |
|
![]() IOS DRAG GREASE "DEKAKUMA" Grease for drag washers with higher viscosity than SIROKUMA. Try it on bass, sea bass, etc.! |
||
![]() IOS Guide Coat [EX] (Extreme) This is a reliable rod for expert anglers who can produce results by reducing guide freeze in extreme conditions. |
![]() IOS Guide Coat Savior of frozen guides in winter. It also reduces the unpleasant noise of PE line and white stains on guides. |
|
![]() IOS Line Coat Spray Four Seasons Excellent line friction resistance reduction effect! An improved version that also extends the life of the line! * Note : This item cannnot be shipped abroad. |
![]() IOS Line Coat Spray Excellent line friction resistance reduction effect! And it extends the life of the line! * Discontinued |
|
Custom Handle | ||
![]() [for DAIWA, ABU, SHIMANO] Double Handle Offset Custom handles with a physics-based approach to development. Custom handles that can be installed on all manufacturers due to their special construction. |
![]() [for DAIWA, ABU] Double Handle SWAN S-shaped design, a classic and traditional handle. Ideal for Abu's Ambassadeur series, etc. |
|
Handle Knob | ||
![]() ACRISTA II Perfect fit with a jewel-like shine and non-slip coating that could be mistaken for jewelry. It is the industry's first salt-resistant, corrosion-resistant, dust-proof, and water-resistant high-precision knob. |
||
![]() Manhattan Aqua Handle Knob High-performance round knob with New York taste. For power games for largemouth bass and more! |
![]() Manhattan Knob High-performance round knob with New York taste. For power games for largemouth bass and more! |
|
![]() Premium Wood Knob A luxurious piece made of ultra-premium wood. The feel and unique sensitivity you can only get from this! |
||
![]() Foresta Flat knob made of very high quality wood. Ultra-thin and wide shape for reliable surface pressure! |
![]() Cardinal Premium Wood Knob A luxurious piece made of ultra-premium wood. A special piece to match the cardinal. |
|
![]() Perfection Handle knob Cylindrical knobs made of resin and available in three sizes. Choose the one that best suits your application! |
![]() TSURAICHI Set For a cool screw with an exciting heart. Exquisite setting of the degree of alignment in 0.2mm increments |
|
![]() Aqurista A knob is a knob and not a knob! This is a type of custom knob that has never been seen before. |
![]() Aqurista SLIM Slimmer than Aqurista! Even lighter and more sensitive! |
|
Tool | ||
![]() Multi Tool This tool is required to install the D-SYSTEM on 15 EXIST and 15 LUVIAS. |
![]() Disk Wrench This tool is used to remove and install the disk-shaped side plates of the 18 EXIST, 19 CERTATE, and 20 LUVIAS series. |
|
Drag System Parts | ||
![]() IOS D-SYSTEM for DAIWA 2018-2022 seires [Red] New model compatible with D-SYSTEM models from 2022 onward. |
![]() SF Spacer for 23 EXIST SF This special spacer is required when installing the IOS-D System, which improves drag characteristics, on the DAIWA 23 EXIST SF. |
|
<![]() IOS D-SYSTEM for DAIWA 2018 year model series [Paraiba Blue] New model compatible with D-SYSTEM's 18 EXIST, 18 TATULA, 18 CALDIA, etc. |
||
![]() IOS D-SYSTEM for DAIWA Smoother drag function. Modification kit to specialize in 1-3lb line. |
![]() IOS D-SYSTEM Felt Special felt attached to the inside of the D-SYSTEM. Please use it as a spare part. The manufacturer's recommended replacement period is six months. |
|
![]() IOS S-system for SHIMANO It has strong hooking power, drag response that linearly follows the load and speed from the initial movement, and a pleasant, fine-pitched drag sound that makes rivals jealous. IOS S-system is the magic drag unit that captivates anglers with its boldness and finesse |
![]() IOS S-system Power! for SHIMANO Necessary and minimum linear response for fighting big fish! Intense hooking power that leaves tame. High-precision drag unit provides a high-pitched mechanical drag sound. IOS S-system Power! is the one and only drag system! |
|
![]() O-ring for S-system & D-system (3pcs.) This is a genuine O-ring that fits the S and D systems. |
||
Line Roller Parts | ||
![]() IOS Line Roller Direct * for DAIWA TD and Real Improved distance and sensitivity! DAIWA model with bearing direct-in structure! |
![]() IOS Line Roller Direct * for DAIWA 16 - 20 series Custom parts for the special type line roller section that appeared on DAIWA's spinning reels after 2016. 2BB conversion possible. |
|
![]() IOS Line Roller IMPACT for SHIMANO Improved distance and sensitivity! SHIMANO model with bearing direct-in structure! |
![]() IOS Line Roller IMPACT "HARD!" for SHIMANO The ultimate custom line roller for high strength, abrasion and corrosion resistance! |
|
![]() Line Roller Carcinal HYPER! Cardinal's exclusive line roller! It's ready for tougher conditions! |
![]() Line Roller Cardinal Type C for Cardinal C series Custom line roller for the popular Cardinal C series with a classic look. |
|
![]() Line Roller for ABU REVO Custom line roller that can be attached to AbuGarcia spinning reels, Revo MGXtreme, etc. |
||
![]() Line Roller Air for SHIMANO * Discontinued |
![]() Line Roller Cardinal ULTRA * Discontinued |
|
Other Parts | ||
![]() SD Connect (Shaft for SHIMANO and DAIWA handles) Attachment shaft that allows DAIWA handles to be attached to SHIMANO reels. |
![]() Detachable Handle Shaft for TD series Left handle only This is a custom part that allows DAIWA Real Four handles to be mounted on TD series reels. |
|
![]() ABU REVO Spinning HANDLE BASE This is a handle base that can be attached to Abu spinning reels by attaching it to the Adjustable custom handle for Cardinal made by IOS Factory. |
![]() IKE-MAN Screw Make the reel more classy and cool! Custom vises to add a touch of adult one-pointedness! |
|
for Cardinal | ||
![]() Economizer for Cardinal It is an ultra-lightweight economizer for ultra-fine PE line that does not require undercoiling and can easily adjust for uneven winding of the line. |
![]() Cardinal handle Adjustable A custom handle designed exclusively for the Abu Cardinal series, which has long been popular with native trout anglers and others. Can be attached to Abu spinning reels in combination with a handle base (sold separately). |
|
![]() Quick Cast A custom part exclusively for Cardinal, this custom part improves the speed of hand return by positioning the bail halfway from the genuine position. |
![]() CANARIA Spring System Easy Custom parts for Cardinal 3 and 33 sizes. More lively and rhythmical ratchet sound! |
|
![]() Cardinal Bail Reinforcing Spring Set Use as spare parts for the springs in the bail section of the Cardinal series. |
![]() Cardinal / Cardinal 3i reel seal This is an original seal featuring the "I" of IOS Factory. |
|
![]() Cardinal Cover Screw These custom screws give the ABU Cardinal 3/33 body cover a stylish look. Ultra-thin size weighing only 1g. |
![]() Cardinal Line Roller Nut This is a line roller nut and custom part used for ABU Cardinal, 0.5g less than the genuine one. |
|
![]() Cardinal Line Roller Base Base plate to be combined with IOS Line Roller Hyper. |
![]() Cardinal Drag Washer 3 pieces per set. Both original and reissued can be installed. |
|
![]() Cardinal C-system The famous cardinal is now more suitable for practical use. Greatly enhanced drag function and winding comfort! * Discontinued |
![]() Line Roller ULTRA for Cardinal Cardinal's fighting power is greatly increased! Specially designed tuning parts! * Discontinued |
|
Stickers | ||
![]() Sticker Mad Black Available in four different sizes. |
![]() Sticker Dark Night Available in two sizes. |
|
![]() Major Sticker The sticker can also measure the size of fish. |
||
Fishing Tools | ||
![]() Yamame Trout Releaser (Hook Releaser) This special hook releaser with a single hook & barbless design has become a standard in native stream minnows in recent years. |
![]() Lure Tuner The Lure Eye Tuner is a must-have for the plucking game that has become popular recently. Two types of tips, 0.8 mm and 1.0 mm, are included. |
|
![]() Premium Releaser An essential item for area trout. It is different from others in appearance, functionality and safety. * Discontinued |
![]() Wakasagi-Rod HANEKKO Super high sensitivity & ultimate bite! Newly developed silicon ultra low elasticity blanks! * Discontinued |
IOS Line Roller Compatibility Chart by Reel May 23, 2023 Updated | |
Reel Name | Compatible Line Roller |
SHIMANO | |
23 VANQUISH | Impact and impact hardware |
22 STELLA 1000 - 4000 | Compatible with impact and impact hard up to No. 4000 |
17/21 SoaRe (Ci4) 500 - C2000S | Compatible with impact and impact hard up to No. 4000 |
BB-X General | Compatible with impact and impact hard up to No. 4000 |
21 TWIN POWER XD C3000 - C5000 | Compatible with impact and impact hard up to No. 4000 |
21 EXSENCE C3000 | Compatible with impact and impact hard up to No. 4000 |
07/10/14/18 STELLA 1000 - 4000 | Compatible with impact and impact hard up to No. 4000 |
12 - 19 Vanquish 1000 - 4000 | Compatible with impact and impact hard up to No. 4000 |
11 - 20 TWIN POWER 1000 - 4000 | Compatible with impact and impact hard up to No. 4000 |
17 TWIN POWER XD C3000 - 4000 | Compatible with impact and impact hard up to No. 4000 |
STRADIC 1000 - 4000 (including CI4) | Compatible with impact and impact hard up to No. 4000 |
STRADIC C2000S - 4000XG | Compatible with impact and impact hard up to No. 4000 |
08/12/18 CARDIFF 1000 - C3000 | Compatible with impact and impact hard up to No. 4000 |
About IOS Line Roller This product is a performance enhancing part. Some models may have rotor shake when reeling, but this is not intended for fast reeling, but for normal retrieval.Thank you for your attention If the rotors are shaky after installing this product, it may be possible to reduce the shaking by replacing the line roller fixing screws with the factory ones. About Line Roller Impact There were two types of line rollers, one up to No.C3000 and the other up to No.4000, but with the integration of Line Roller Impact, they are now available up to No.4000 as a single item. The product package is marked with a label that reads "Compatible with No. 4000. Of course, it can be used from No. 1000 to No. 4000 (C5000), and its performance is almost the same as that of the conventional line roller Impact. We apologize for any inconvenience caused by the mixture of the old and the new. The conventional line roller impact is not compatible with No. 4000 reels. When installing on a No. 4000 reel, be sure to purchase one with a No. 4000 compatible label. |
|
DAIWA | |
23 EXIST SF | Currently confirming compatibility |
23 AIRITY 1000~LT4000 | Direct, 16 series - (including hardware) |
21 PRESSO LT2000SS-P | Direct, 16 series - (including hardware) |
21 LUVIAS AIRITY 1000 - LT4000 | Direct, 16 series - (including hardware) |
22 EXIST 1000 - LT3000 | Direct, 16 series - (including hardware) |
18 EXIST LT1000 - LT3000 (including FC) | Direct, 16 series - (including hardware) |
08 EXIST STEEZ CUSTOM | Direct for Real |
05 - 15 EXIST 1000 - 3000 class | Direct for Real |
14 EXIST 2004 - 2506 | Direct for Real |
17 THEORY 1000 - 3000 class | Direct for Real |
17 STEEZ All Type | Direct, 16 series - (including hardware) |
05 STEEZ 2004, 2504 | Direct for Real |
08 - 14 PRESSO 1003 - 2025 | Direct for Real |
17 PRESSO LTD | Direct, 16 series - (including hardware) |
17 AEGIS 2000 - 2500 | Direct for Real |
08 月下美人-GEKKABIJIN 2004 | Direct for Real |
月下美人-GEKKABIJINMX 2004 | Direct for TD |
18 月下美人-GEKKABIJINMX LT1000SP - LT2000S | Direct for TD |
TD IGNIS, TD-X, Z, SC-Z 2004 - 2508 | Direct for TD |
DAIWA FREAMS * Same as installation of LEGALIS, etc. |
Direct for TD |
LEGALIS 1000 - 3000 | Direct for TD |
REVROS 1000 - 3000 | Direct for TD |
08 IGNIS | Direct for Real |
19 CERTATE LT2500 - LT5000D | Direct, 16 series - (including hardware) |
CERTATE SW 5000-6000 | Direct for Real |
16 CERTATE 1003 - 2508 | Direct, 16 series - (including hardware) |
10 - 13 CERTATE 1000 - 3000 class | Direct for Real |
First generation CERTATE, First generation BRANZINO, etc. 1003 - 3000 | Direct for TD |
* Some first generation (04) CERTATE, BRANZINO, etc. are applicable to TD line rollers. * The shape of the line roller of BRANZINO changes depending on the year. * After installation, the rotor will rotate slightly due to the weight balance change, but this will not be a problem on a normal retrieve. |
|
20 LUVIAS FCLT2000S - LT4000 | Direct, 16 series - (including hardware) |
07 - 15 LUVIAS 1000 - 3000 class | Direct for Real |
TATULA (Spinning) 2000 - 2500 | Direct for Real |
19 BALLISTIC LT1000SP - LT4000 | Direct, 16 series - (including hardware) |
18, 21 CALDIA LT1000 - LT4000 * After installation, the rotor will rotate slightly due to the weight balance change, but this will not be a problem on a normal retrieve. |
Direct for Real |
DSLT1000S-P * After installation, the rotor will rotate slightly due to the weight balance change, but this will not be a problem on a normal retrieve. |
Direct, 16 series - (including hardware) |
17 MORETHAN | Direct, 16 series - (including hardware) |
AbuGarcia - Abu / Others - | |
All Abu Cardinal 3/33 and 4/44 series | Cardinal Line Roller Hyper |
Cardinal52及び152 | Cardinal Line Roller Hyper |
Abu REVO series (Spinning) However, REVO MGX THETA is not compatible. |
Abu REVO Line Roller |
Abu ZENON 1000 - 2500 | Abu REVO Line Roller |
Piscifun Carbon X 1000S | Abu REVO Line Roller |
* Reels not listed in the compatibility chart have not yet been confirmed as compatible. | |
IOS Drag System Compatibility Chart by Reel | |
Reel Name | Drag System |
SHIMANO | |
23 Vanquish 4000 | S-system POWER |
23 Vanquish 1000-C3000 | S-system |
22 STELLA 1000 - C3000 | S-system |
22 STELLA 4000-C5000 | S-system POWER |
17/21 SoaRe (Ci4) 500 - C2000S | S-system (If the rotor nut interferes with the rotor nut, the rotor nut with two holes is fixed in the lower hole.) |
21 EXSENCE C3000 | S-system |
21 TWIN POWER XD C3000 | S-system |
21 TWIN POWER XD 4000 - C5000 | S-system POWER |
VANFORD 1000S - C3000 | S-system (If the rotor nut interferes with the rotor nut, the rotor nut with two holes is fixed in the lower hole.) |
VANFORD 2500S, 2500SHG | S-system (2-hole type, fixed at the lower hole) |
VANFORD C3000 | S-system |
VANFORD 4000 class | S-system POWER |
18 STELLA 3000MHG | S-system |
10 - 18 STELLA 1000 - C3000 * Please inquire about 07 STELLA |
S-system |
14 STELLA 3000 - 4000 | S-system POWER |
10 STELLA 3000 - 4000 | S-system POWER |
18 STELLA No. 4000 - C5000 (3000 is being confirmed for installation) | S-system POWER |
10 EXSENCE or later 4000 class | S-system POWER |
12 - 19 Vanquish 1000 - C3000 (C3000, 3000MHG included) | S-system |
12 - 19 Vanquish 4000 | S-system |
STRADIC 1000 - C3000 (including CI4) | S-system |
08/12/18 CARDIFF 1000 - C3000 | S-system |
11 - 17 TWIN POWER 1000 - C3000 | S-system |
17 TWIN POWER XD C3000 | S-system |
15 TWIN POWER 1000 - C3000 | S-system |
20 TWIN POWER 1000 - 3000MHG (including C3000) | S-system |
20 TWIN POWER 4000 | S-system POWER |
17 TWIN POWER XD 4000 - C5000 | S-system POWER |
15 TWIN POWER 4000 - C5000 (The number 3000 is currently being confirmed for installation.) | S-system POWER |
11 TWIN POWER or later 3000 - C5000 | S-system POWER |
DAIWA | |
23 EXIST SF | Currently confirming compatibility |
23 AIRITY 1000~3000 | D system 18-22 series |
21 PRESSO LT2000SS-P | D system 18-22 series * When installing, set the supplied 1mm shim under the clutch ring (under the sleeve of the one-way roller), raise the rotor, and install in the bottom hole position. |
LUVIAS AIRITY FCLT 1000 - LT3000S-C (Beyond that, we're still checking the status quo.) |
D system 18-22 series |
22 EXIST 1000 - 2500 | D system 18-22 series (2-hole type, fixed at the lower hole) |
18 EXIST 1000 - 3000 class | D-SYSTEM 18 EXIST series |
15 EXIST 1025 - 3020 * Multi Tool required |
D-SYSTEM 12 EXIST series (Main shaft 3.4mm) |
12 EXIST 1003 - 2508 | D-SYSTEM 12 EXIST series (Main shaft 3.4mm) |
05 EXIST 1003 - 2508 | D-SYSTEM 05 EXIST series (Main shaft 3.2mm) |
19 CERTATE LT2500 - 3000 | D-SYSTEM 18 EXIST series |
10 - 16 CERTATE 1003 - 2004 16 CERTATE requires a separate Multi Tool. |
D-SYSTEM 12 EXIST series (Main shaft 3.4mm) |
10 - 16 CERTATE 2508 | D-SYSTEM 17 THEORY series (Main shaft 4mm) |
04 CERTATE 1000 - 2500 | D-SYSTEM 17 THEORY series (Main shaft 4mm) |
17 STEEZ All Types * Multi Tool required |
D-SYSTEM 12 EXIST series (Main shaft 3.4mm) |
17 PRESSO Limited 1025 - 2004 * Multi Tool required |
D-SYSTEM 12 EXIST series (Main shaft 3.4mm) |
17 AEGIS 2000 - 2500 | D-SYSTEM 17 THEORY series (Main shaft 4mm) |
TD-Z, SC-Z, SC PRESSO | D-SYSTEM TD series |
TD AEGIS (Early model), 月下美人-GEKKABIJIN (Early model) | D-SYSTEM TD series |
17 THEORY 1003 - 2004 | D-SYSTEM 17 THEORY series (Main shaft 4mm) |
20 LUVIAS FCLT2000 - 2500 | D-SYSTEM 18 EXIST series (limited to those with 2-hole specifications) |
12 - 15 LUVIAS 1003 - 2508 * 15 LUVIAS requires a separate Multi Tool. |
D-SYSTEM 12 EXIST series (Main shaft 3.4mm) |
07 LUVIAS 1000 - 2500 | D-SYSTEM 05 EXIST series (Main shaft 3.2mm) |
18 TATULA (Spinning) 2000, 2500 class | D-SYSTEM 18 EXIST series |
18, 21 CALDIA 1000 - 2500 | D-SYSTEM 18 EXIST series |
19 BALLISTIC LT 1003 - LT4000 | D-SYSTEM 18 EXIST series |
DSLT 1000S-P | D-SYSTEM 18 EXIST series |
* In principle, items not listed in the conformity table are not conformable. | |
Handle Knob Compatibility Chart by Reel and Handle | |
Shimano 10 Stella or later | Manhattan Manhattan Aqua Premium Wood Knob Foresta ACRISTAⅡ |
DAIWA | Manhattan Manhattan Aqua Premium Wood Knob Foresta ACRISTAⅡ |
ZPI Funnel REVIVE RodeoCraft |
Manhattan Manhattan Aqua Premium Wood Knob Foresta ACRISTAⅡ |
IOS Handle Adjustable for cardinal SWAN |
Manhattan Manhattan Aqua Premium Wood Knob Foresta |
Pisifan Spinning Reels 1000S | Manhattan Manhattan Aqua Premium Wood Knob Foresta |
ABU Cardinal 33/44 series (Handle knobs are screw type) |
Cardinal Wood Knob |
Cardinal handle Ajustable | Cardinal Wood Knob Manhattan Manhattan Aqua Premium Wood Knob、 AcristaⅡ ※Except for the cardinal wood knob, please replace the knob shaft with the supplied handle knob shaft. |
ABU ZENON 1000~2500 | Manhattan |
※ All IOS original single and double handles are compatible with IOS handles. ※ Although caulked handle knobs cannot be installed as they are, all IOS handles can be installed on Isuzu bait reels and ABU series bait reels when the IOS W-handle is installed. |
|
Compatibility chart for IOS Cardinal Reinforced Springs by reel | |
Cardinal 3/33/33X/33E Other All other 3 series, both reissued and original |
IOS cardinal・Veil・Power・Spring |
Disk wrench Disk wrench PRO |
Compatible with both sides of most disk-type side plates of 18-22 Iguisto series, 19 Celtate series, and 20-21 Rubias series under Daiwa 1000-4000. For higher numbers, physical confirmation is required. |