IOS Factory Compatibility Chart by Reel
IOS Line Roller Compatibility Chart by Reel September 8, 2022 Updated | |
Reel Name | Compatible Line Roller |
SHIMANO | |
22 STELLA 1000 - 4000 | Compatible with up to IMPACT No. 4000 |
17/21 SoaRe (Ci4) 500 - C2000S | Compatible with up to IMPACT No. 4000 |
BB-X General | Compatible with up to IMPACT No. 4000 |
21 TWIN POWER XD C3000 - C5000 | Compatible with up to IMPACT No. 4000 |
21 EXSENCE C3000 | Compatible with up to IMPACT No. 4000 |
07/10/14/18 STELLA 1000 - 4000 | Compatible with up to IMPACT No. 4000 |
12 - 19 Vanquish 1000 - 4000 | Compatible with up to IMPACT No. 4000 |
11 - 20 TWIN POWER 1000 - 4000 | Compatible with up to IMPACT No. 4000 |
17 TWIN POWER XD C3000 - 4000 | Compatible with up to IMPACT No. 4000 |
STRADIC 1000 - 4000 (including CI4) | Compatible with up to IMPACT No. 4000 |
STRADIC C2000S - 4000XG | Compatible with up to IMPACT No. 4000 |
08/12/18 CARDIFF 1000 - C3000 | Compatible with up to IMPACT No. 4000 |
DAIWA | |
21 PRESSO LT2000SS-P | Direct 16 - 20 series |
21 LUVIAS AIRITY 1000 - LT4000 | Direct 16 - 20 series |
22 EXIST 1000 - LT3000 | Direct 16 - 20 series |
18 EXIST LT1000 - LT3000 (including FC) | Direct 16 - 20 series |
08 EXIST STEEZ CUSTOM | Direct for Real |
05 - 15 EXIST 1000 - 3000 class | Direct for Real |
14 EXIST 2004 - 2506 | Direct for Real |
17 THEORY 1000 - 3000 class | Direct for Real |
17 STEEZ All Type | Direct 16 - 20 series |
05 STEEZ 2004, 2504 | Direct for Real |
08 - 14 PRESSO 1003 - 2025 | Direct for Real |
17 PRESSO LTD | Direct 16 - 20 series |
17 AEGIS 2000 - 2500 | Direct for Real |
08 月下美人-GEKKABIJIN 2004 | Direct for Real |
月下美人-GEKKABIJINMX 2004 | Direct for TD |
18 月下美人-GEKKABIJINMX LT1000SP - LT2000S | Direct for TD |
TD IGNIS, TD-X, Z, SC-Z 2004 - 2508 | Direct for TD |
DAIWA FREAMS * Same as installation of LEGALIS, etc. |
Direct for TD |
LEGALIS 1000 - 3000 | Direct for TD |
REVROS 1000 - 3000 | Direct for TD |
08 IGNIS | Direct for Real |
19 CERTATE LT2500 - LT5000D | Direct 16 - 20 series |
16 CERTATE 1003 - 2508 | Direct 16 - 20 series |
10 - 13 CERTATE 1000 - 3000 class | Direct for Real |
First generation CERTATE, First generation BRANZINO, etc. 1003 - 3000 | Direct for TD |
* Some first generation (04) CERTATE, BRANZINO, etc. are applicable to TD line rollers. * The shape of the line roller of BRANZINO changes depending on the year. * After installation, the rotor will rotate slightly due to the weight balance change, but this will not be a problem on a normal retrieve. |
|
20 LUVIAS FCLT2000S - LT4000 | Direct 16 - 20 series |
07 - 15 LUVIAS 1000 - 3000 class | Direct for Real |
TATULA (Spinning) 2000 - 2500 | Direct for Real |
19 BALLISTIC LT1000SP - LT4000 | Direct 16 - 20 series |
18, 21 CALDIA LT1000 - LT4000 * After installation, the rotor will rotate slightly due to the weight balance change, but this will not be a problem on a normal retrieve. |
Direct for Real |
DSLT1000S-P * After installation, the rotor will rotate slightly due to the weight balance change, but this will not be a problem on a normal retrieve. |
Direct 16 - 20 series |
AbuGarcia - Abu / Others - | |
All Abu Cardinal 3/33 and 4/44 series | Cardinal Line Roller Hyper |
Cardinal52及び152 | Cardinal Line Roller Hyper |
Abu REVO series (Spinning) However, REVO MGX THETA is not compatible. |
Abu REVO Line Roller |
Abu ZENON 1000 - 2500 | Abu REVO Line Roller |
Piscifun Carbon X 1000S | Abu REVO Line Roller |
* Reels not listed in the compatibility chart have not yet been confirmed as compatible. | |
IOS Drag System Compatibility Chart by Reel | |
Reel Name | Drag System |
SHIMANO | |
22 STELLA 1000 - C3000 | S-system |
17/21 SoaRe (Ci4) 500 - C2000S | S-system (If the rotor nut interferes with the rotor nut, the rotor nut with two holes is fixed in the lower hole.) |
21 EXSENCE C3000 | S-system |
21 TWIN POWER XD C3000 | S-system |
21 TWIN POWER XD 4000 - C5000 | S-system POWER |
VANFORD 1000S - C3000 | S-system (If the rotor nut interferes with the rotor nut, the rotor nut with two holes is fixed in the lower hole.) |
VANFORD 2500S, 2500SHG | S-system (2-hole type, fixed at the lower hole) |
VANFORD C3000 | S-system |
VANFORD 4000 class | S-system POWER |
18 STELLA 3000MHG | S-system |
10 - 18 STELLA 1000 - C3000 * Please inquire about 07 STELLA |
S-system |
14 STELLA 3000 - 4000 | S-system POWER |
10 STELLA 3000 - 4000 | S-system POWER |
18 STELLA No. 4000 - C5000 (3000 is being confirmed for installation) | S-system POWER |
10 EXSENCE or later 4000 class | S-system POWER |
12 - 19 Vanquish 1000 - C3000 (C3000, 3000MHG included) | S-system |
12 - 19 Vanquish 4000 | S-system |
STRADIC 1000 - C3000 (including CI4) | S-system |
08/12/18 CARDIFF 1000 - C3000 | S-system |
11 - 17 TWIN POWER 1000 - C3000 | S-system |
17 TWIN POWER XD C3000 | S-system |
15 TWIN POWER 1000 - C3000 | S-system |
20 TWIN POWER 1000 - 3000MHG (including C3000) | S-system |
20 TWIN POWER 4000 | S-system POWER |
17 TWIN POWER XD 4000 - C5000 | S-system POWER |
15 TWIN POWER 4000 - C5000 (The number 3000 is currently being confirmed for installation.) | S-system POWER |
11 TWIN POWER or later 3000 - C5000 | S-system POWER |
DAIWA | |
21 PRESSO LT2000SS-P | D-SYSTEM 18 series * When installing, set the supplied 1mm shim under the clutch ring (under the sleeve of the one-way roller), raise the rotor, and install in the bottom hole position. |
LUVIAS AIRITY FCLT 1000 - LT3000S-C (Beyond that, we're still checking the status quo.) |
D-SYSTEM 18 series |
22 EXIST 1000 - 2500 | D-SYSTEM 18 series, 18 - 22 series (2-hole type, fixed at the lower hole) |
18 EXIST 1000 - 3000 class | D-SYSTEM 18 EXIST series |
15 EXIST 1025 - 3020 * Multi Tool required |
D-SYSTEM 12 EXIST series (Main shaft 3.4mm) |
12 EXIST 1003 - 2508 | D-SYSTEM 12 EXIST series (Main shaft 3.4mm) |
05 EXIST 1003 - 2508 | D-SYSTEM 05 EXIST series (Main shaft 3.2mm) |
19 CERTATE LT2500 - 3000 | D-SYSTEM 18 EXIST series |
10 - 16 CERTATE 1003 - 2004 16 CERTATE requires a separate Multi Tool. |
D-SYSTEM 12 EXIST series (Main shaft 3.4mm) |
10 - 16 CERTATE 2508 | D-SYSTEM 17 THEORY series (Main shaft 4mm) |
04 CERTATE 1000 - 2500 | D-SYSTEM 17 THEORY series (Main shaft 4mm) |
17 STEEZ All Types * Multi Tool required |
D-SYSTEM 12 EXIST series (Main shaft 3.4mm) |
17 PRESSO Limited 1025 - 2004 * Multi Tool required |
D-SYSTEM 12 EXIST series (Main shaft 3.4mm) |
17 AEGIS 2000 - 2500 | D-SYSTEM 17 THEORY series (Main shaft 4mm) |
TD-Z, SC-Z, SC PRESSO | D-SYSTEM TD series |
TD AEGIS (Early model), 月下美人-GEKKABIJIN (Early model) | D-SYSTEM TD series |
17 THEORY 1003 - 2004 | D-SYSTEM 17 THEORY series (Main shaft 4mm) |
20 LUVIAS FCLT2000 - 2500 | D-SYSTEM 18 EXIST series (limited to those with 2-hole specifications) |
12 - 15 LUVIAS 1003 - 2508 * 15 LUVIAS requires a separate Multi Tool. |
D-SYSTEM 12 EXIST series (Main shaft 3.4mm) |
07 LUVIAS 1000 - 2500 | D-SYSTEM 05 EXIST series (Main shaft 3.2mm) |
18 TATULA (Spinning) 2000, 2500 class | D-SYSTEM 18 EXIST series |
18, 21 CALDIA 1000 - 2500 | D-SYSTEM 18 EXIST series |
19 BALLISTIC LT 1003 - LT4000 | D-SYSTEM 18 EXIST series |
DSLT 1000S-P | D-SYSTEM 18 EXIST series |
* In principle, items not listed in the conformity table are not conformable. |