- Parts for SHIMANO Baitcasting Reels
- Parts for DAIWA Baitcasting Reels
- Parts for AbuGarcia Baitcasting Reels << You Are Currently Viewing This Page
- Parts for ISUZU / Pagani Baitcasting Reels
- Parts for tailwalk Baitcasting Reels
- Handles for SHIMANO Baitcasting Reels
- Handles for AbuGarcia / DAIWA Baitcasting Reels
- Parts for SHIMANO Spinning Reels
- Parts for AbuGarcia Cardinal Reels
- Handle Knobs / Other Parts

◆Spool for Revo


Microcast Spool
for ABU 16 Revo LTX-BF8, ALC-BF7, LT7, LV7, LC6
16LTX20R・16LTX34R・16LTX52R
It is a spool that can be attached to the latest 2016 model.


Microcast Spool
for ABU Revo MGX/ALT
Full Blanking Model
MGX57RR
Line capacity 14lb-85m
The original 6-point centrifugal brake is already installed.


Microcast Spool
for ABU Revo LTX/LTZ/LT
Full Blanking Model
RVLTX32RR
Line capacity 12lb-50m
Ultra-lightweight spool for ABU Revo LT / LTX / LTZ


Microcast Spool
for ABU Revo LTX/LTZ/LT
RVLTX21R
Line capacity 10lb-50m
Shallow groove lightweight spool for ABU Revo LT / LTX / LTZ


Microcast Spool
for ABU Revo 2013 Series
RV338R
Line capacity 12lb-65m
ABU Revo 2013 model
Power Crank 5/6 / Big Shooter Compact
Compatible with Revo3 SX-HS


Microcast Spool
for ABU Revo 3 ELITE 7/8
RV352R-IV
Line capacity 14lb-90m
ABU Revo 2013 model Elite 7/8 compatible
The original 6-point centrifugal brake is already installed.


Microcast Spool
for ABU Revo Elite/EliteII/AURORA/Power Crank/STX
RV31R/RV51R MAG
Spool for Revo with magnetic brake specifications


Microcast Spool
for ABU Revo Elite/EliteII/AURORA/Power Crank/STX
RV31R/RV51R IB
ABU Revo Spool for old IB


Microcast Spool
for ABU Revo CB, AKATSUKI
RV31R/RV51R Centrifugal specification
ABU Revo CB / Akatsuki exclusive spool


Microcast Spool
for ABU Revo S, SX
RV31LS /RV51LS
Lightweight shallow groove spool for ABU Revo S, SX


◆Spool for Morrum


Microcast Spool
for ABU Morrum SX 1600C/1601C MAG
[SXMG1618R]
Microcast Spool exclusively for ABU Morrum SX 1600C/1601C MAG (Magnet brake type)


Microcast Spool
for ABU Morrum SX 1600C/1601C Hi-Speed
[SXHS1618R]
Microcast Spool exclusively for ABU Morrum SX 1600C/1601C Hi-Speed (Centrifugal brake type)


Microcast Spool
for ABU Morrum SX 1600C/1601C ULTRAMAG
[SXUM1618R]
Microcast Spool exclusively for ABU Morrum SX 1600C/1601C ULTRAMAG (Magnet brake type)


Microcast Spool
for ABU Morrum SX 1600C Ultra MAG, IVCB
[SXUM1640R] [discontinued]
The custom spool corresponding to the 1600th model of the Morrum SX series has been renewed and reappeared!
Line capacity that can wind 10lb-65m.


Microcast Spool
for Morrum SX 3600C Ultra MAG, IVCB
[SXUM3640R] [discontinued]
The custom spool corresponding to the 3600th model of the Morrum SX series has been renewed and reappeared!
Line capacity that can wind 12lb-70m.


Microcast Spool
for ABU Garcia Morrum ZX 1600MAG
ZXMG1628R / ZXMG1648R [discontinued]
Lightweight spool for ABU Morrum ZX1600MAG.
Two types of groove depths, 2.8mm and 4.8mm, are available.
Supports from bait finesse to cover games.


Microcast Spool
for ABU Garcia Morrum ZX 3600MAG
ZXMG3648R [discontinued]
Taking advantage of the abundant amount of spools due to the groove depth of 4.8mm, it is recommended for floating patterns such as cranking and jerk bait in Lake Biwa!


Microcast Spool
ABU Morrum ZX 1600, 1601
ZXUM1638 [discontinued]
This is a dedicated spool for ABU Garcia ZX 1600, 1601.


Microcast Spool
ABU Morrum ZX 3600, 3601
ZXUM3638 [discontinued]
Dedicated spool for ABU Garcia ZX 3600, 3601.


Microcast Spool
for ABU Morrum SX MAG
SXMG1620R [discontinued]
A shallow groove lightweight spool tuned for mountain stream trout compatible with Morrum SX 1600C and 1601C MAG.


Microcast Spool
for ABU Morrum SX MAG
SXMG1640R [discontinued]
A shallow groove lightweight spool tuned for black bass compatible with Morrum SX 1600C and 1601C MAG.


Microcast Spool
for ABU Morrum SX 1600C UltraMAG, IVCB
SXUM1620R/SXUM1640/SXUM1638 [discontinued]
ABU Morrum SX 1600C,1601C IVCB
Spool for UltraMAG


Microcast Spool
for ABU Morrum SX 3600C UltraMAG, IVCB
SXUM3640 [discontinued]
ABU Morrum SX 3600C ,3601C
Spool for UltraMAG


Microcast Spool
for ABU Morrum SX 1600C MAG
SXMG1636 [discontinued]
ABU Morrum SX 1600C, 1601C
Shallow groove lightweight spool for MAG


Microcast Spool
for ABU Morrum SX 3600C MAG
SXMG3636 [discontinued]
ABU Morrum SX 3600C, 3601C
Shallow groove lightweight spool for MAG


Microcast Spool
for ABU Morrum SX 1600C Hi-Speed
SXHS1620R/SXHS1640R [discontinued]
ABU Morrum SX 1600C, 1601C
Shallow groove lightweight spool for Hi-speed


Microcast Spool
for ABU Morrum SX 3600C Hi-Speed
SXHS3620R/SXHS3640R [discontinued]
ABU Morrum SX 3600C, 3601C
Shallow groove lightweight spool for Hi-speed


◆Ambassadeur series 1000 Spool


Microcast Spool
for ABU 1000/1000C
AMB1030R / AMB1050R
Microcast Spool for Ambassadeur 1000, 1000C.
It can be used with both the bronze bushing model Ambassadeur 1000 and the ball bearing model 1000C.


◆Ambassadeur series 1500 Spool


Microcast Spool
Trout special for ABU 1500C Series
AMB1518TR
A trout custom model with blanking specifications developed for ABU Ambassadeur 1500C. Great for area trout and native trout.
Line capacity 6lb-35m


Microcast Spool
for ABU 1500C
AMB1520R / AMB1540R
A new model with "R" specifications is now available on the spool for ABU Ambassadeur 1500C! There are shallow groove model (6lb-40m) and middle groove model (8lb-60m), so please choose according to your preference.


Microcast Spool
for ABU 1500C
AMB1520 / AMB1540 [discontinued]
Custom spool for ABU Ambassadeur 1500C.


◆Ambassadeur series 2500 Spool


DAEMON D32 Spool Conversion Kit
for ABU Ambassadeur 1500C/2500C
[DMN-D32KIT]
This kit upgrades your existing φ30mm spool for the 1500C/2500C to φ32mm.
Only compatible with 1500C/2500C models equipped with Avail Brake Plate (Ver.5 or later) and Avail Palming Plate.


Microcast Spool
Avail 20th Anniversary
AMB2518TR 20th GOLD
Avail releases a limited edition MicrocastSpool AMB2518 TR 20th GOLD set to commemorate 20 years in business.


Microcast Spool
Trout Special for ABU 2500 Series
AMB2518TR
An unlikely trout special for the Ambassadeur 2500 series blanking spool model! Line capacity 6lb-65m


Microcast Spool
for ABU 2500 Series
AMB2520R/AMB2540R/AMB2560R
Lightweight custom spool compatible with Ambassadeur 2500C. There are 3 types depending on the line capacity, so please choose according to your preference.


◆Ambassadeur series 3500 Spool


Microcast Spool
for ABU 3500C Series
AMB3520R/AMB3540R
Medium groove lightweight custom spool that fits Ambassadeur 3500C. From 2019 production, the material of the spool shaft has been changed to extra super duralumin.


Microcast Spool
for ABU 3500C Series
AMB3540R * Old part number titanium shaft
Medium groove lightweight custom spool that fits Ambassadeur 3500C. Line capacity 12lb-65m


◆Ambassadeur series 4500/4600 Spool


Microcast Spool
for ABU 4500CB/4600CB Series
AMB4530R-CB
A shallow groove model of a lightweight custom spool that fits Ambassadeur 4500CB and 4600CB. Line capacity 8lb-60m


Microcast Spool
for ABU 4500CB/4600CB Series
AMB4550R-CB
Lightweight custom spool mid-groove model compatible with Ambassadeur 4500CB and 4600CB. Line capacity 14lb-60m


Microcast Spool
for ABU 4500C [EBISU] Series
AMB4530R-EF
A shallow groove model of a lightweight custom spool that fits the Ambassadeur 4500C (Ebisu). Line capacity 8lb-60m


Microcast Spool
for ABU 4500C [EBISU] Series
AMB4550R-EF
Lightweight custom spool mid-groove model compatible with Ambassadeur 4500C (Ebisu). Line capacity 14lb-60m


Microcast Spool
for ABU 4500C Series
[AMB4530UC2][AMB4550UC2]
Two types of spools compatible with the UC (Ultracast) models of the Ambassadeur 4500C series.
Line capacity is as follows:
AMB4530UC2: PE 1.0 - 100m
AMB4550UC2: PE 1.5 - 120m.


Microcast Spool
for ABU 4500C Series
AMB4550UC [discontinued]
A mid-groove spool that fits the UC (Ultracast) model of the Ambassadeur 4500C series. Line capacity 14lb-60m


◆Ambassadeur series 5000/5500 Spool


Microcast Spool
for ABU 5000 OLD Series
AMB5030R：Bronze Bushing Model
It is a middle groove custom spool that can be attached to the old Ambassadeur 5000, 5000D. Line capacity 12lb-75m


Microcast Spool
for ABU 5000 OLD Series
AMB5050R：Bronze Bushing Model
A deep groove custom spool that can be attached to the old Ambassadeur 5000, 5000D. Line capacity 16lb-70m


Microcast Spool
for ABU 5000 OLD Series
AMB5030R-BB：Ball Bearing Required
A shallow groove custom spool that can be attached to the old Ambassadeur 5000, 5000D.
You can use the old model with bearing specifications by combining it with two 1030ZZ size bearings (sold separately).


Microcast Spool
for ABU 5000 OLD Series
AMB5050R-BB：Ball Bearing Required
A shallow groove custom spool that can be attached to the old Ambassadeur 5000, 5000D.
You can use the old model with bearing specifications by combining it with two 1030ZZ size bearings (sold separately).


Microcast Spool
for ABU 5000 OLD Series
AMB5030R-C
It corresponds to Ambassadeur 5000C, 5001C, and corresponds to the model manufactured from the initial model to around 1984. Line capacity 12lb-75m


Microcast Spool
for ABU 5000 OLD Series
AMB5050R-C
It corresponds to Ambassadeur 5000C, 5001C, and corresponds to the model manufactured from the initial model to around 1984 in the Ebisu fishing era. Line capacity 12lb-110m


Microcast Spool
for ABU 5500 OLD Series
AMB5530R
A lightweight custom spool mid-groove model that fits the old model of the Ambassadeur 5500. Line capacity 12lb-75m


Microcast Spool
for ABU 5500 OLD Series
AMB5550R
A deep groove model with a lightweight custom spool that fits the old model of the Ambassadeur 5500. Line capacity 16lb-70m


Microcast Spool
for ABU 5500C OLD [70's] Series
[The spool rim level is 3mm]
Ambassadeur released in the 1970s, a mid-groove custom spool compatible with the so-called old ab. Line capacity 12lb-75m


Microcast Spool
for ABU 5500C OLD [70's] Series
[The spool rim level is 5mm]
Ambassadeur released in the 1970s, a deep groove custom spool compatible with the so-called Old Abu. Line capacity 16lb-70m


Microcast Spool
for ABU 5500C [MAMIYA] Series
AMB5530R-OA
A medium groove lightweight custom spool compatible with the Mamiya era model of the ABU Ambassadeur 5500C. Line capacity 12lb-75m


Microcast Spool
for ABU 5500C [MAMIYA] Series
AMB5550R-OA
A deep groove lightweight custom spool compatible with the Mamiya era model of the ABU Ambassadeur 5500C. Line capacity 16lb-70m


Microcast Spool
for ABU 5000AL/5500C Palming (OA Sticker Model)/5500C Syncro (EF Sticker Model)/5500 Striper (Click type Model)
AMB5030R-AL
Medium groove lightweight custom spool suitable for ABU Ambassadeur 5000AL, 5500C palming, 5500C synchro, 5500 striper (clicker model), etc. Line capacity 12lb-75m


Microcast Spool
for ABU 5000AL/5500C Palming (OA Sticker Model)/5500C Syncro (EF Sticker Model)/5500 Striper (Click type Model)
AMB5050R-AL
A deep groove lightweight custom spool suitable for ABU Ambassadeur 5000AL, 5500C palming, 5500C synchro, 5500 striper (clicker model), etc. Line capacity 16lb-70m


Microcast Spool
for ABU 5500C Series
AMB5550UC3
Spool with a center groove compatible with AMBASSADEUR 5500C series UC (Ultra Cast) models. Line capacity: 16lb - 100m.


Microcast Spool
for ABU 5500C Series
AMB5550UC2
A mid-groove spool that fits the UC (Ultracast) model of the Ambassadeur 5500C series. Line capacity 16lb-80m


Microcast Spool
for ABU 5500C Series
AMB5550UC [discontinued]
A mid-groove spool that fits the UC (Ultracast) model of the Ambassadeur 5500C series. Line capacity 16lb-80m


◆Ambassadeur series 6500 Spool


Microcast Spool
for ABU 6500C Series
AMB6550UC
A mid-groove spool that fits the UC (Ultracast) model of the Ambassadeur 6500C series. Line capacity 16lb-100m


◆Parts for Ambassadeur series


Ambassadeur 1500C/2500C Compatible
Wide Conversion Kit
(Offset Frame, Worm Shaft, Spool 3-Piece Set)
[amb_2520rw_kit_lcr]
This is a 3-piece set of custom parts designed to "widen" (increase the frame width of) your existing 1500C/2500C.


Aluminum Offset frame 2.0
for ABU 1500C
Lightweight frame for Ambassadeur 1500C with 2.0mm offset.


Aluminum Offset frame 2.0
for ABU 2500C
Lightweight frame for Ambassadeur 2500C with 2.0mm offset.


Aluminum Offset frame MF7.5
for 1500C (Machine Cut Foot)
By replacing the genuine frame, a significant reduction in reel weight can be achieved.


Aluminum Offset frame MF7.5
for 2500C (Machine Cut Foot)
The foot part specification has been changed from the March 2024 model. Replacing it with a genuine frame can significantly reduce the reel weight.


Aluminum Offset frame 7.5
for ABU 1500C
Weight is reduced and the foot position is raised, improving palming performance!


Aluminum Offset frame 7.5
for ABU 2500C
Weight is reduced and the foot position is raised, improving palming performance!


Palming Plate
for ABU Ambassadeur 2500C/2501C
A lightweight palming plate made of extra super duralumin that is compatible with 1500C and 3500C including Ambassadeur 2500C.


Brake Plate
for Ambassadeur 2500C IAR/2500C/2501C
Lightweight brake plate for 2500C IAR/2500C/2501C made of ultra-super duralumin.


Brake Plate Ring
This is a dress-up part that can be installed on Avail brake plates and palming plates. The product comes in a set of two.


Side Cup Nut Set for ABU 2500C
A compatible product for the nuts that secure the side cup, for the ABU Ambassadeur 1500C, 2500C and 3500C.


Hook Keeper A Type
Exclusive for Avail Sidecup Nut Set
A hook keeper that attaches to the reel body (handle side).


O-Ring 5-Piece Set 1.0x2.0
For fixing Avail side cup nut
For fixing Cogwheel #5152
Cogwheel #10255
*Can be used as a substitute for an E-ring when fixing the above cogwheels.


Clutch Arm for ABU Ambassadeur 1500C, 2500C, 2501C, 3500C
If your genuine parts are discolored white or have cracks due to deterioration, please use this product as a replacement.


Clutch Arm Spring (Single)
Replacement part for when the original becomes worn.


Microcast Brake
Exclusive for MS-SXHS1618R
[MB-SXHS16]
This is a part of converting the Microcast Spool for ABU Ambassadeur Morrum SX1600C/SX1601C Hi-Speed to a magnet brake specification.


Microcast Brake
for ABU 1500-3500
AMB1520/AMB1540
Avail spool magnet brake for Ambassadeur 1000-3000.


Microcast Brake
for ABU 4000-6000
CR2 /CL2
ABU Garcia Ambassadeur 4000 5000 No. 6000 Magnet Brake


Microcast Brake
for only Avail Microcast Spool AMB1518TR AMB1518
Custom spool for Avail Ambassadeur Magnet brake compatible with AMB1518TR.


Microcast Brake
for only Avail Microcast Spool AMB2518TR AMB2518
This is a magnet brake for AMB2518TR spool, which was developed for trout exclusively for Avail Ambassadeur 2500C model.


Neodymium Magnet
Compatible with Avail magnet brakes for ABU
A neodymium magnet that can be incorporated into Avail magnet brakes that are compatible with ABU reel.


4-Point Brake UC Bakelite for ABU Ambassadeur 4000–6000 Series ULTRACAST
This replacement part converts the 2-point brake (centrifugal brake) with part number #19372 used in the Ultracast Design Spool to a 4-point brake.


Brake Blocks for ABU UC (ULTRACAST) Bakelite
Brake block for use with 4-point brake UC bake.


4P-Brake [UC]
for ABU Garcia Ambassadeur 4000-6000
Centrifugal brake unit for Ambassadeur series.
Compared to genuine brakes, the number of brake shoes can be increased, so it is recommended when you want to use the brakes more.


4P-Brake [Kaiketsu Porori]
(4P_BRAKE_25C_KKP)
for ABU Garcia Ambassadeur 2500C
Features include a brake block detachment prevention mechanism and an ON/OFF functionality for the brake blocks.
Prevents loss of brake blocks during spool access.


Brake Block for Kaiketsu Porori
(B_BROCK_KKP)
Large and Small Brake Blocks Exclusively for Kaiketsu Porori
The brake block has a specific installation direction. The rounded tip should face outward.


4P-Brake
for ABU Garcia Ambassadeur 2500C / SX Hi-speed
4P Brake 25C / 4P-BRAKE-25C Type2 / 4P Brake SXHS
Changed the genuine 2-point brake (centrifugal brake) to a 4-point brake.


4P-Brake
for RVEL
[with 4 Brake Blocks]
Centrifugal brake unit attached to the avail spool that can be attached to Akatsuki, Elite CB, and Revo S.


Brake Block Compatible products
ABU Brake Block Bakelite [4 pieces]
Ambassadeur Brake block that can be used for reel brake units.


Aluminum Click Wheel with built-in Bushing
for Ambassadeur 1500C, 2500C, 3500C series
It is a new type of aluminum click wheel that integrates the genuine ABU part "#22001 HANDLE BUSHING" with the "aluminum click wheel for 2500C".


Aluminum Click Wheel
for Ambassadeur 1500C, 2500C, 3500C series
By replacing stainless steel with extra super duralumin, it is lighter.


Aluminum Main Gear Bushing
for Ambassadeur 1500C, 2500C, 3500C series
The material is changed from brass used in genuine products to extra super duralumin, making it lightweight.


Titanium 64 Clutch Return Plate TI64-CRP (#23188 WHEEL)
for ABU Ambassadeur 1600C/2600C, Morrum SX MAG series
Lightweight titanium 64 alloy is used as the material, and weight reduction can be expected by replacing it with a genuine stainless steel product.
For Ambassadeur 1600C, 2600C only


Titanium 64 Drive Gear Plate TI64-DGP (#25802)
for ABU Morrum ZX/SX series
Lightweight titanium 64 alloy is used as the material, and weight reduction can be expected by replacing it with a genuine stainless steel product.
For Morrum ZX series only


Ultra Light Level Winder Set
for ABU 2500C
A lightweight level wind that can be attached to Ambassadeur 1500-3500.


Ultra Light Level Winder Set
for ABU 5500C
A lightweight level wind that can be attached to Ambassadeur 4000-6000.


Ultra Light Pilot Guide
for ABU 1500C - 7000C
This part can be fitted to the Ambassadeur series that uses the genuine part number 51765 or 5176, such as ABU 1500C - 7000C.


Pilot Guide Cap
for ABU 2500C / 5500C
It is a single cap included in the Ultra Light Level Winder Set.


Aluminum Worm Shaft 2BB model
for ABU 1500C/2500C
[WS-15C-2BB-S/WS-25C-2BB-S]
The "Worm Shaft 2BB" has been reintroduced with a new screw assembly design. By adopting screw fixation for securing component parts such as gears and ball bearings, disassembly is now possible. This has greatly improved maintainability.


Aluminum Worm Shaft
for ABU Ambassadeur 4000-6000 series
This aluminum worm shaft with bearings can be installed on the ABU Ambassadeur 4000-6000 series (various years).


Worm Shaft Plug
for ABU 1500C/2500C
Replacement Worm Shaft Plug (Common)


Aluminum Worm Shaft 2BB model
for ABU 1500C/2500C
[Old version]
Aluminum worm shaft 2 ball bearing model for ABU Ambassadeur 1500C, 2500C.
By using lightweight materials and supporting 2-ball bearings, it is possible to reduce weight and improve rotational performance.


Aluminum Worm Shaft, Aluminum Level Wind Pipe
for ABU 1500C/2500C
Worm shaft for ABU Ambassadeur 1500C, 2500C, level wind pipe separately.


Aluminum Level Wind Pipe Gold-Plated
for ABU Ambassadeur 2500C
Color change parts exclusively for Avail's "Aluminum Worm Shaft WS-25C-2BB 2500C".
Please use it only for display.


ABU #5152, #23404 Compatible Product
Cogwheel
Cog wheels used for 1500C, 2500C, etc., bearings and weight reduction increase flight distance


ABU #10255 Compatible Product
Cogwheel
For reels using genuine part numbers #10255 and #1152469 such as ABU 1500/2500 series


O-Ring 5-Piece Set 1.0x2.0
For fixing Avail side cup nut
For fixing Cogwheel #5152
Cogwheel #10255
*Can be used as a substitute for an E-ring when fixing the above cogwheels.


Precision Shim Washer Set
Inner Diameter 4mm x Outer Diameter 5mm
A precision shim washer set for fine-tuning slight play and drawing out the maximum rotational performance.


#13462 Pinion Bushing BB Kit
Easy clutch operation for 1500C, 2500C, etc.!


ABU #19373 Compatible Product
Click and Cogwheel
For reels using genuine part numbers #10255 and #1152469 such as ABU 1500/2500 series


DAEMON 5.3 Gear Set
for ABU Ambassadeur 1500C/2500C
A new type of gear set for the ABU Ambassadeur 1500/2500 series.


High Speed Gear Set Type 2 for ABU Ambassadeur 1500C/1600C/2500C/2600C
Redesigned version 2022!
To upgrade the clutch feeling and to make the reeling lighter


ABU #10229 Compatible Product
Pinion Yoke
This is a genuine compatible part for reels using #10229 such as ABU 1500C/2500C/2501C/3500C.


Hi Speed Gear Set
for ABU Ambassadeur 1500C, 1600C, 2500C, 2600C
Greatly increased retrieve speed.


High Speed Main Gear
for ABU Ambassadeur 1500/2500 series


High Speed Pinion Gear
for ABU Ambassadeur 1500/2500 series


Nezumigaeshi 7000, 7001
for ABU Garcia Ambassadeur 7000/7001
Line trouble prevention plate


E-ring
Inner diameter 2.4mm x outer diameter 6mm
ABU 1500C, 2500C etc.
Stainless steel E-ring for Microcast Spool shaft.


E-ring
Inner diameter 3mm x outer diameter 7mm
For fixing the cog wheel, for fixing the handle (# 4490)
E-ring Made of stainless steel


ABU #10259 Compatible Product
Retainer Shaft
The bushing that supports the pinion gear
It is a part to stop it so that it does not fall off.


ABU #10265 Compatible Product
Bearing retainer
It is a compatible part of genuine part number # 10265 used for 1500C to 3500C.


ABU #10256 Compatible Product
Spool Shaft Spring
for ABU 1500C, 2500C series
It is a compatible product spring attached to the spool shaft of ABU Ambassadeur 2500C etc.


ABU #5131 Compatible Product
Spring Washer
Ambassadeur 1000 - 6000 range.
Compatible part for genuine part number # 5131.


ABU #5115 Compatible Product
Washer
Widely compatible with AMBASSADEUR 1000 to 6000 series. This is a replacement part compatible with genuine part number 5115.


Line Alarm Gear Collar
This product is required when using the line alarm function.


Spacer for Microcast Brake AMB1520/1540
Single item sales of plastic spacers attached to magnet brakes such as AMB1520 and AMB1540


Aluminum Clutch Lever
[ALCL-SX-74/Low position,
ALCL-SX-24/High position]
for Morrum SX/ZX series
Aluminum clutch for SX and ZX series
Two heights
Both No. 1600 and No. 3600 can be installed.


Aluminum Clutch Side Washer Set
for Morrum SX and ZX Series Interchangeable
Aluminum clutch for SX and ZX series
They are plastic parts for both sides of a clutch lever.


◆Star Drag


Round Drag
for ABU 2500C
SD-AB-C1R/SD-AB-C1L
An original drag exclusively for the Ambassadeur 2500C model.
Weight reduction can also be expected.


Star Drag Short Round-Tipped
for ABU Morrum / Ambassadeur
SD-AB-MSTR-S/SD-AB-MSTL-S
Teardrop type, short version of the star drag for ABU Ambassadeur.


Star Drag Short
for Morrum, Ambassadeur series
SD-AB-S5R
A short version of the Star Drag for ABU Ambassadeur.


Star Drag
for ABU Morrum / Ambassadeur
SD-AB-KSTR/KSTL/KOFR/KOFL
Two types of shapes can be expected to dress up and reduce weight.


Star Drag
for ABU Morrum SX Ultra MAG / Morrum ZX
SD-AB-ZXUM
A star drag for Morrum SX Ultra MAG and Morrum ZX. Weight reduction can also be expected.


Star Drag
for Revo：Second model
SD-RV-R/SD-RV-L
The click sound remains the same! Weight reduction can also be expected.


Star Drag for
Revo：First model
SD-RVSS-R/SD-RVSS-L
You can expect weight reduction while keeping the click sound.
Compatible reels are Elite CB / S / SX / STX, etc.


Washer
WASHER-DRAG
(1 Piece) Gold
Washer for drag adjustment.


◆Mechanical Brake Knob


Mechanical Brake Knob
for Ambassadeur
BCAL-25C-DP
A mechanical brake knob that can be attached to Ambassadeur 1500-3500.


Mechanical Brake Knob Type 3
for Ambassadeur
BCAL-25C-3
A mechanical brake knob that can be attached to Ambassadeur 1500-3500.


Mechanical Brake Knob Type 2
for Ambassadeur
BCAL-25C-2
A mechanical brake knob that can be attached to Ambassadeur 1500-3500.


Mechanical Brake Knob
for Ambassadeur
BCAL-25C
A mechanical brake knob that can be attached to Ambassadeur 1500-3500.


Mechanical Brake Knob
for Ambassadeur
55ST
Avail's original mechanical brake knob for ABU Ambassadeur.


Mechanical Brake Knob
for Ambassadeur
55FL
Avail's original mechanical brake knob for ABU Ambassadeur.


Mechanical Brake Knob
for Revo LTX
BCAL-LTX
It is a custom part of single color alumite that can be attached to 16LTX series, old LTX, Deez6, etc.


Mechanical Brake Knob
for Revo [Old]
BCAL-RV
You can choose from 10 color variations.


O-Ring 1.5×10.7
For Ambassadeur Series Mechanical Brake


◆Handle Parts


Handle Lock Nut M8
for ABU / DAIWA
Aluminum handle nut for ABU. The size is M8


Handle Lock Nut M9
for ABU
Ti64 alloy handle nut for ABU. The size is M9


Handle Retainer for ABU
10mm
Retainer available for ABU 1500C, 2500C, etc.


Handle Retainer for ABU
12.5mm
Retainer available for 4500C, 5500C, SX series, etc.