▼ Click the buttons below !! ▼

 SHIMANO Baitcasting Reels Parts

◆NEW BANTAM series


18 Bantam MGL
Microcast Spool
[18BTM36RI:Shallow]

The shallow groove type 18BTM36RI dares to reduce the amount of thread winding to support casting with less force such as pitching and short casting at a high level.


18 Bantam MGL
Microcast Spool
[18BTM58RI:Deep]

The deep groove type 18BTM58RI is recommended for fishing that requires a lot of thick thread such as big bait, frog, and rubber jig at Lake Biwa.

◆SLX series

21 SLX BFS, 17 Scorpion BFS
Microcast Spool
[21SLX15R, 21SLX29R]

Equipped with a magnet brake designed exclusively for bait finesse, it goes very well with lightweight lures, making it a perfect reel for finesse casting.


8 pcs Magnet Set
for Avail Spool for 21SLX15R

Custom spool for Avail 21SLX BFS Auxiliary magnet recommended to be installed together when installing 21SLX15R. It has the effect of strengthening the braking force.


19 SLX MGL 70
Microcast Spool
[19SLX40R]

Versatile reels that are good at winding and shooting can be tuned for lightweight lures.

◆ALDEBARAN series


22 ALDEBARAN BFS
Microcast spools
[22ALD22R]

Microcast spool for 22 ALDEBARAN BFS.


16 ALDEBARAN BFS
Microcast Spool
[16ALD15R:Shallow]

16 ALDEBARAN BFS custom spool shallow groove model.
It is suitable for aiming area trout and native trout with a lightweight lure by winding a line around 4lb.
* Please use by attaching the dedicated auxiliary magnet set.


8 pcs Magnet Set
for Avail Spool for 16ALD15R

Avail 16 ALDEBARAN BFS Custom Spool ・ Auxiliary magnet recommended to be installed when installing 16ALD15R. It has the effect of strengthening the braking force.


16 ALDEBARAN BFS
Microcast Spool
[16ALD29R:Deep]

Custom spool for 16 ALDEBARAN BFS designed with a deeper groove than the genuine spool.
Wrap around the 12lb line and is suitable for use with Light Texas and small plugs in bass fishing.


15 ALDEBARAN BFS XG LIMITED
Microcast Spool
[ALD15LTD18TR]

It is a trout special model.
Depending on the tackle balance, you can cast a spoon of 1g or less at a managed fishing spot.


15 ALDEBARAN/18ALDEBARAN MGL
Microcast Spool
[ALD1518TRI:Shallow]

A shallow groove spool specializing in trout in managed fishing areas.
Line capacity that can wind a Fluoro 4lb line for 75m.


15 ALDEBARAN/18ALDEBARAN MGL
Microcast Spool
[ALD1532RI:Deep]

A shallow groove spool specializing in casting lightweight lures.
Line capacity that can wind 70m of Fluoro 8lb line.


12 ALDEBARAN BFS XG
Microcast Spool
[ALD1224R / MB-ALD1224k
SVS Puller ALD12]

Microcast spool
for 12 ALDEBARAN BFS XG


Dedicated Centrifugal Brake
for 12 ALDEBARAN BFS XG ALD1224R
[4P-BRAKE ALD12]

A 4-point centrifugal brake exclusively for the Microcast Spool ALD1224R.
For the brake block, please use the genuine brake block of 12 ALDEBARAN BFS.


12 ALDEBARAN BFS XG
Microcast Honeycomb Spool
[ALD1218TR]

Original SVS 4-point brake 4P-ALD12 installed.


Core50 Mg, CHRONARCH 50E, CURADO 50E, 09 ALDEBARAN Mg, 10 Scorpion XT1000
Microcast Honeycomb Spool
Full blanking model [ALD0936RR]

A multi-purpose full blanking model that matches all genres of fishing.


09 ALDEBARAN Mg/10 Scorpion XT 1000
Microcast Spool
Trout Special Model [ALD0918TR]

The ultimate trout-only spool that is even lighter than this.


09 ALDEBARAN Mg/10 Scorpion XT 1000
Microcast Spool
Full Blanking Model [ALD0950RR]

Avail Pro Staff Produced by Yasushi Yamamoto
High-end full blanking model.


Core50 Mg, CHRONARCH 50E, CURADO 50E, 09 ALDEBARAN Mg, 10 Scorpion XT1000
Microcast Spool
[ALD0928R II/4P-Brake ALD09]

"RII" specifications are now available on the spool for 09 ALDEBARAN Mg!

◆CHRONARCH series


17 CHRONARCH MGL
Microcast Spool
[17CRNC36RI:Shallow]

Shallow groove model of custom spool for 17 CHRONARCH MGL.
It is possible to technically cast a medium-weight class lure by winding a slightly thicker line less and taking advantage of the lightweight spool.


17 CHRONARCH MGL
Microcast Spool
[17CRNC60RI:Deep]

Deep groove model of custom spool for 17 CHRONARCH MGL.
Since it is a specification that can wind many thick lines, it is suitable for use such as power fishing such as cover shooting and big bait.


14 CHRONARCH CI4+
Microcast Spool
[14CRNC50R]

Capacity that Fluoro 12lb line can wind 85m
It is about 30% lighter than the genuine one.

◆SCORPION series


21 SLX BFS, 17 Scorpion BFS
Microcast Spool
[21SLX15R, 21SLX29R]

Microcast Spool for 21 SLX BFS, 17 Scorpion BFS
Equipped with a magnet brake designed exclusively for bait finesse, it goes very well with lightweight lures, making it a perfect reel for finesse casting.


8 pcs Magnet Set
for Avail Spool for 21SLX15R

Custom spool for Avail 21SLX BFS Auxiliary magnet recommended to be installed together when installing 21SLX15R. It has the effect of strengthening the braking force.


17 Scorpion BFS
Microcast Spool
[17SCP15R][17SCP29R]
[discontinued]
A shallow groove custom spool that can be attached to the 17 Scorpion BFS series. 4lb-45m with less line capacity than the genuine spool.


8 pcs Magnet Set
for Avail Spool for 17SCP15R

Avail 17 Scorpion BFS Custom Spool Auxiliary magnet recommended to be installed when installing 17SCP15R. It has the effect of strengthening the braking force.


16 Scorpion 70
Microcast Spool
[16SCP7020RI:Shallow]

Shallow groove model of custom spool for 16 Scorpion 70.
Recommended for native trout, bass fishing bait finesse, light salt fishing, etc.


16 Scorpion 70
Microcast Spool
16SCP7040RI:Deep

16 Scorpion 70 custom spool middle groove model.
It is recommended not only for scrolls such as crank baits in bass fishing, cover shooting using Texas rigs, but also for rock fish.


14 Scorpion 200,15 CUARADO 200
Microcast Spool
[14SCP2050R]

Capacity that Fluoro 12lb line can wind 100m
It is about 30% lighter than the genuine one.


09 Scorpion XT 1500
Microcast Spool
SCPXT1550R

09 The lightweight spool that can be attached to the Scorpion XT1500 / 10 Amenista is back.
Performance is improved with higher accuracy by renewal.


00 Scorpion 1000 Series
Microcast Spool
[SCP1032R]

The lightweight spool that can be attached to Scorpion 1000 and Scorpion Mg 1000 is back.
Performance is improved with higher accuracy by renewal.

◆CALCUTTA series


17 CALCUTTA CONQUEST BFS
Microcast Spool
[17CNQ15R:Shallow]

Shallow groove model of custom spool for 17 CALCUTTA CONQUEST BFS. Since it has a shallower groove than the genuine spool, it is possible to easily cast on a thinner line of 4-6 lb.
* Please use by attaching the dedicated auxiliary magnet set.


8 pcs Magnet Set
for Avail Spool for 17CNQ15R

Custom spool for Avail 17 CALCUTTA CONQUEST BFS Auxiliary magnet recommended to be installed together when installing 17CNQ15R. It has the effect of strengthening the braking force.


17 CALCUTTA CONQUEST BFS
[17CNQ29R:Deep]

Custom spool for 17 CALCUTTA CONQUEST BFS designed to be deeper than the genuine spool. It is suitable when you want to wind a thicker line around the 12lb line and use a small plug for bass fishing or saltwater fishing.


14-15 CALCUTTA CONQUEST 100/100HG
Microcast Spool
[14CNQ1024RI]

(Compatible with SVS Infinity Magnet Brake)
A shallow groove spool specializing in casting lightweight lures. Line capacity that can wind the Fluoro 8lb line 65m.


14 CALCUTTA CONQUEST 100
Microcast Spool
[14CNQ1068R]

Line capacity that can wind 100m of Fluoro 14lb line for users who feel that the line capacity is not enough with the genuine spool.


14 CALCUTTA CONQUEST 200
Microcast Spool
[14CNQ2060R]

It is a line capacity that can wind 14 to 16 lb of Fluoro about 100m and PE No.5 about 75m.


14 CALCUTTA CONQUEST 100
Microcast Spool
[14CNQ1024R]
[discontinued]
A shallow groove spool specializing in casting lightweight lures. Line capacity that can wind the Fluoro 8lb line 65m.


12 CALCUTTA 100 series
Microcast Spool
[CC1238R]

NEW standard spool for top water fishing.


01 CALCUTTA CONQUEST 50/51
Trout Special Model
[CNQ5020TR]

An ultra-shallow groove spool specializing in casting ultra-light lures.


01 CALCUTTA CONQUEST 50, 51
Trout Special Model
Microcast Spool
[CNQ5026TR]
[discontinued]
A blanking custom spool for SHIMANO CALCUTTA CONQUEST 50 model.


CALCUTTA CONQUEST 50/51
Trout Special Model
[CNQ5014TR]
[discontinued]
Microcast spool for SHIMANO CALCUTTA CONQUEST 50, 51.

<
CALCUTTA CONQUEST 50
Microcast Spool
[CNQ5060R]

Deep groove model of custom spool for 01CALCUTTA CONQUEST 50.
It is recommended for fishing using a small plug such as a small crank in bass fishing by winding a thick line.


CALCUTTA CONQUEST 50/51
NEW Microcast Spool
[CNQ5026Ra]
[discontinued]
SHIMANO CALCUTTA CONQUEST 50 4P-Brake CNQ50 is already installed.


CALCUTTA CONQUEST 50S
Microcast Spool
[CNQ5018S / CNQ5036S]
[discontinued]
Shallow groove lightweight spool exclusively for shallow specials.


01 CALCUTTA CONQUEST 100
Microcast Spool
[CNQ1032R]
[discontinued]
Lightweight shallow groove spool that can be attached to the old CALCUTTA CONQUEST.
With a capacity of 12lb-60m, thick lines can be wound moderately.


01 CALCUTTA CONQUEST 200
Microcast Spool
[CNQ2038R]
[discontinued]
A middle groove spool that can be attached to the old CALCUTTA CONQUEST No.200.
With a capacity of 12lb-75m, it is an easy-to-use line capacity centered on scrolls.


05 CALCUTTA 50/CALCUTTA XT 50
Microcast Spool
[CC5017 / CC5032]
[discontinued]
05 CALCUTTA 50 series spool, magnet brake.


05 CALCUTTA 100, CALCUTTA XT 100
Microcast Spool
[CC1034]
[discontinued]
05 CALCUTTA 100 series spool.

◆BRENIOUS series


14 BRENIOUS
Microcast Spool
[BRN1417R]
[BRN1448R]

The 1417R type has a line capacity of 4lb-55m, and the 1448R has a line capacity of 10lb-80m.

◆METANIUM series


20 Metanium
Microcast Spool
20MT24R, 20MT42R

Microcast Spool for 20 Metanium


16 Metanium MGL
Microcast Spool
[MT1620RI, MT1636RI, MT1670R]

Three types of groove types can be used for various lures.


13 Metanium
Microcast Spool
[MT1326RR]

Full blanking model with RR specifications is now available!


13 Metanium
Microcast Spool
[MT1332R]

New Microcast Spool for 13 Metanium
It can be used as a centrifugal brake by transplanting SVS.


Core 100Mg/CHRONARCH D/07 Metanium Mg
Microcast Spool
Full Blanking Model [MT0726RR]

Equipped with original 4-point brake 4P-MT07.


Core 100Mg/CHRONARCH D/07 Metanium Mg
Microcast Spool
[MT0725 / MT0739]

Spool for 07 Metanium Mg and 07 Metanium Mg7
Three types of groove depth.


05 Metanium XT
Microcast Spool
[MT05XT25 / MT05XT39]

SHIMANO 05 Spool for Metanium XT
Screw type magnet brake.


97 Metanium XT/00 Metanium Mg
Microcast Spool
[MT0039R]
[discontinued]
For 97 Metanium XT, 00 Metanium Mg
A model equipped with a 4-point centrifugal brake.
12lb-90m line capacity.


92 Scorpion Metanium XT
Microcast Spool
[MT9239R]

The best-selling red meta spool has been renewed and is now available! The famous machine of yesteryear is revived.

◆ANTARES series


12 ANTARES
Microcast Spool
[ANT1234R]

NEW Microcast Spool for 12 ANTARES
It can be used as a centrifugal brake by transplanting SVS.


ANTARES AR
Microcast Spool
[ANTAR25 / ANTAR39]

Spool for SHIMANO ANTARES AR
Groove depth 3.9 mm.


ANTARES
Microcast Spool
[ANTFS38R]
[discontinued]
A model equipped with a 4-point centrifugal brake compatible with the first ANTARES. 12lb-75m line capacity.


◆BANTAM series


BANTAM 100, 10
Microcast Spool
[BTM1020R]
[BTM1039R]

SHIMANO's popular old reel, custom spool for Bantam 100 has been renewed! The color lineup is even more abundant!


Bantam100 MAG
Microcast Spool
BTM1039MAG

SHIMANO Bantam MAG CAST 100SG, 100XSG, 10XSG
Other compatible models Spool for magnet brake models.


BANTAM 200, 20
Microcast Spool
[BTM2039R]

SHIMANO's old reel, Microcast Spool for BANTAM 200 has been renewed and re-appeared! 16lb-50m line capacity!


BANTAM 200
Microcast Spool
BTM2039Discontinued
SHIMANO old reel, spool for BANTAM 200.


Bantam200 MAG
Microcast Spool
BTM2039MAG

SHIMANO Bantam MAG CAST200SG, 20SG, 21SG
Other compatible models Spool for magnet brake models.


BB-2
Microcast Spool
BB243R
[discontinued]
We have prepared 4.3mm, which is useful for various fishing.


BANTAM 100
Microcast Spool
BTM1039[discontinued]
Spool for SHIMANO old reel, BANTAM 100.

◆Brake Unit Parts


NEW SVS Infinity puller
for 20-16 Metanium MGL, 18 Bantam MGL, 16 Scorpion 70, 17 CHRONARCH MGL, etc.

A special tool for safely and securely removing the centrifugal brake unit attached to the genuine SHIMANO bait reel spool.


SVS infinity 4 puller
for 15 ALDEBARAN, 14 CHRONARCH CI4+,
14 Scorpion, 14 CALCUTTA CONQUEST,
15 CURADO

A special tool required to remove the SVS Infiniti that comes with the genuine spool.


SVS infinity puller
for 12 ANTARES, 13 Metanium

A special tool required to remove the SVS Infiniti that comes with the genuine spool.


Microcast Brake 18BTM
for 18 BANTAM MGL

It is a magnet brake compatible with 2 models of Microcast Spool for 18 BANTAM MGL.


Microcast Brake ALD15K
for 15 ALDEBARAN 50

A magnet brake for 15 ALDEBARAN 50 Microcast Spool.


Microcast Brake 20MT
for 20 Metanium

Compatible with 20 Metanium.


Microcast Brake MT16K
for 16 Metanium MGL

A magnet brake for 16 Metanium MGL Microcast Spool.


Microcast Brake 16SCP
for 17 CHRONARCH MGL, 16 Scorpion 70/71

Magnet brakes compatible with 2 types of Microcast Spool for 16 Scorpion 70 and 2 types of Microcast Spool for 17 CHRONARCH MGL.


Microcast Brake CNQ14K
for SHIMANO 14 CALCUTTA CONQUEST

This is a dedicated magnet brake for 14 CALCUTTA CONQUEST 100 Microcast Spool.


Microcast Brake CRNC17K
for SHIMANO 17 CHRONARCH MGL

This is a dedicated magnet brake for 17 CHRONARCH MGL Microcast Spool.


Microcast Brake SHSC-05A
Avail Microcast Spool for SHIMANO

Screw type magnet brake system compatible with Avail spool for SHIMANO.


Microcast Brake ALD1224K
for 12 ALDEBARAN BFS XG

It is a magnet brake system compatible with the spool for 12 ALDEBARAN BFS XG made by Avail.


Neodymium Magnet
Compatible with Avail magnet brakes for SHIMANO

A neodymium magnet that can be incorporated into Avail magnet brakes compatible with SHIMANO reels.


8 pcs Magnet Set
for Avail Spool for 17SCP15R

Avail 17 Scorpion BFS Custom Spool Auxiliary magnet recommended to be installed when installing 17SCP15R. It has the effect of strengthening the braking force.


4P-Brake
for SHIMANO Microcast Spool only (CORE 50Mg, CHRONARCH CH50E, CURADO CU50E, 09 ALDEBARAN Mg, 10 Scorpion XT 1000)
ALD09

4-point centrifugal brake compatible with Avail spools (for SHIMANO).


4P-Brake
for SHIMANO Microcast Spool only (CORE 100Mg, CHRONARCH CH200E, CURADO CU200E, 07 Metanium Mg, 05 Metanium XT, Scorpion XT 1500)
MT07

4-point centrifugal brake compatible with Avail spools (for SHIMANO).


4P-Brake
for CALCUTTA CONQUEST 50/51
CNQ50

4-point centrifugal brake compatible with Avail spools (for SHIMANO).


4P-Brake
for Avail Microcast Spool CNQ5026TR
CNQ50-38

4-point centrifugal brake compatible with Avail spools (for SHIMANO) such as CNQ5026TR.


Brake Block Compatible product for SHIMANO

It is a compatible product of the centrifugal brake block for SHIMANO.
As it is a set of 4, it is ideal for the 4-point centrifugal brake for SHIMANO Microcast Spool.


SHIMANO Genuine SVS Centrifugal Brake Block

SHIMANO genuine SVS brake block.
We have prepared two types, ALDEBARAN BFS genuine and ALDEBARAN Mg genuine.
In addition to the genuine spool, it can also be used for the centrifugal brake of Avail Microcast Spool.


SHIMANO Brake Block Bakelite for BANTAM
[For genuine spool only]

Brake block for genuine SHIMANO BANTAM spool.


ISUZU Compatible Brake Block 3mm
B-BLOCK-ISUZU-3

It can also be used for the centrifugal brake (CNQ50-38) for SHIMANO CALCUTTA CONQUEST.


SHIMANO Aluminum Level Wind Pipe
for Bantam 100
LWP-BTM100 LWP-BTM200

Lightweight level wind pipe for SHIMANO Bantam 100/10 and each Magcast model.


◆Star Drag


Star Drag
for 20 Metanium
SD-20MT

It is a star drag for 20 Metanium.


Star Drag
for 19 SLX
SD-19SLX

It is a star drag for 21 SLX BFS, 19SLX MGL, 16 Metanium.


Hexagonal Star Drag 2
SD-HEX2-SH

for 19 SLX MGL, 18 OCEA CONQUEST 300HG, 17 CALCUTTA CONQUEST BFS, 18 BANTAM MGL, 17 Scorpion DC, 17 Scorpion BFS, 17 CHRONARCH MGL


Original Star Drag
for 15 ALDEBARAN 50
SD-ALD15

A dedicated star drag that has one more hand than the genuine product corresponding to the 15 ALDEBARAN 50 series!


Original Star Drag
for 12 ALDEBARAN BFS XG
SD-ALD12-A

Avail offset handles will be available.


Star Drag
for SHIMANO
SD-ALB

By replacing with this star drag, the offset handle can be attached.


Offset Star Drag
for 12 EXSENCE DC, 11 BASS ONE XT
SD-EXDC

It is a specially designed star drag.


Star Drag
for 13 Metanium
SD-MT13-A

Avail SHIMANO 13 Metanium Offset Handle
HD-OF-13MT-A is available.


Offset Star Drag
for CORE 100MG, CHRONARCH D, CURADO G/E, CITICA G, 07 Metanium Mg etc.
SD-MT07

By replacing with this star drag, the offset handle can be attached.


Original Star Drag
for 09 Scorpion XT 1500, 10 Scorpion XT 1000, 11 Scorpion DC, 14 Brenious, etc.
SD-SCPXT

It is a specially designed star drag.


Star Drag
for CHRONARCH 50mg, CURADO D, 00-04 Scorpion 1000
SD-SCP-A

Avail Original Star Drag is compatible with Scorpion 1000


Star Drag
for 12 CALCUTTA
SD-12CC

The drag part of 12 CALCUTTA can be changed to the star drag shape.


Star Drag
for CALCUTTA CONQUEST 50/51 (01 CONQUEST 50/51,50S/51S)
SD-SH-CNQ

Avail offset handles will be available.


Star Drag
for CALCUTTA CONQUEST 50/51 (01 CONQUEST 50/51,50S/51S)
SD-CNQ05A

Avail offset handles will be available.


Original Star Drag
for SHIMANO
SD-SH-BR /SD-SH-BL
[discontinued]
Compatible with various reels with assembled parts!


◆Mechanical Brake Knob


Mechanical Brake Knob
for 20 Metanium
BCAL-20MT

Compatible with 20 Metanium.


Mechanical Brake Knob
for 18 BANTAM MGL
BCAL-18BTM

The current model is compatible with 18 BANTAM MGL, and the old model is compatible with 07 Metanium Mg, 08 Metanium Mg DC, and 09 ALDEBARAN Mg.


Mechanical Brake Knob
for 17 CHRONARCH MGL
BCAL-17CRNC

It is compatible with a wide range of models from current models such as 17 CHRONARCH MGL and 17 Scorpion DC to older models such as 14 Scorpion 200 and 09 Scorpion XT 1500.


Mechanical Brake Knob
for Scorpion XT 1500, Scorpion, CHRONARCH, CASITAS, Brenious, 炎月-ENGETSU
BCAL-SCPXT

Added compatible models! A knob that can be attached to various reels.


Mechanical Brake Knob
for 16 Metanium MGL, 15 Metanium DC, 13 Metanium
BCAL-MT16

A single color alumite mechanical brake knob that can be attached to the 16 Metanium MGL, 15 Metanium DC, and 13 Metanium series.


Mechanical Brake Knob
for 17 Scorpion BFS, 16 Scorpion 70/71
BCAL-16SCP70

A monochromatic alumite mechanical brake knob that can be attached to 16 Scorpion 70 series.


Mechanical Brake Knob
for 15 ALDEBARAN, 16 ALDEBARAN BFS XG
BCAL-ALD15

Introducing the long-awaited color parts for 15 ALDEBARAN!


Mechanical Brake Knob
for 12 ANTARES
BCAL-12ANT

By replacing it with this knob, you can install the hexagonal star drag.


Mechanical Brake Knob
for 12 CALCUTTA, 92 Scorpion Metainuim XT, 12 EXSENCE DC
BCAL-12CC

It is a knob that can be attached to 12 CALCUTTA, 13 OCEA CALCUTTA, Red Meta, and 12 Exsense DC.


Mechanical Brake Knob
for 09 ALDEBARAN Mg, 07 Metanium Mg, 08 Metanium Mg DC
BCAL-ALD09

07 Metanium Mg, 08 Metanium Mg DC can be used to further expand the range of color coordination.


Mechanical Brake Knob
for 12 EXSENCE DC
BCAL-EXDC

It is a knob that can be attached to 12 EXSENCE DC, 13 Ocea CALCUTTA, 13 CALCUTTA 300, 400.


Mechanical Brake Knob
for CALCUTTA CONQUEST 50/50S
BCAL-CNQ50

Color matching with Star Drag to create your own conquest!


Mechanical Brake Knob
for Scorpion Mg 1000
BCAL-SCPMG

Scorpion 1000 series is also acceptable.


◆Clutch Parts


Offset Aluminum Clutch
for 97 Metanium XT, 00 Metanium Mg
A custom clutch with a lower center of gravity than the genuine one that can be incorporated into 00 Metanium Mg.


◆for CALCUTTA


PALMING PLATE
for CALCUTTA CONQUEST 50/51
P-PLATE CNQ50

A modern design for the classical atmosphere of Conquest!


PALMING PLATE SHAFT KNOB
for CALCUTTA CONQUEST 50/51
SCRW-PPLATE

A modern design for the classical atmosphere of Conquest!


SCREW SET
for 12 CALCUTTA
CS-HEX-M3x10

Hex wrench type body fixing bolt set for 12 CALCUTTA and 13 OCEA CALCUTTA.


PERMING SHAFT SCREW
for 12 CALCUTTA
SCPP-12CC

This is a knob for opening the side cup (main body B) when adjusting the centrifugal brake.


◆Handle Parts


Handle Lock Nut for SHIMANO M7

A lightweight and rigid nut made by carving duralumin. Please use it for Avail's custom handle.


Handle Nut M7 for SHIMANO Genuine Handle

A new nut for SHIMANO genuine handles equipped with a resin retainer.


SHIMANO Aluminum Knob Cap

Knob that can be attached to SHIMANO's old type genuine S knob



SHIMANO Light Slim Handle Knob Cap

Handle knob cap that can be used for reels of the latest models such as 15 ALDEBARAN and Vanquish Stradic CI4 +.



SHIMANO 14 CALCUTTA CONQUEST Knob Cap

Handle knob cap that can be used for 14-15CAL CUTTA CONQUEST and 15 Metanium DC.


SHIMANO Oval Knob Cap

Handle knob cap for 12 ANTARES, 12 EXSENCE, 13 Metanium, 14 Brenius, and 14 CHRONARCH.


Knob Cap Puller for 14 CALCUTTA CONQUEST, 15 METANIUM DC

A special tool that allows you to easily remove the knob cap mounted on SHIMANO reels released after 2014.

 DAIWA Baitcasting Reel Parts


Mechanical Brake Knob
for 17 STEEZ A TW, 16 STEEZ SV TW
BCAL-STZ

Colorful alumite parts compatible with STEEZ SV TW and STEEZ A TW.


Handle Knob Cap for DAIWA

Suitable for RCS type I cork knob


Oval Knob Cap for DAIWA

Compatible with various knobs on DAIWA reels
Perforated specifications that are easy to remove

 AbuGarcia Baitcasting Reel Parts

◆Revo series Spool


Microcast Spool
for ABU 16 Revo LTX-BF8, ALC-BF7, LT7, LV7, LC6
16LTX20R・16LTX34R・16LTX52R

It is a spool that can be attached to the latest 2016 model.


Microcast Spool
for ABU Revo MGX/ALT
Full Branking Model
MGX57RR

Line Capacity 14lb - 85mm
The original 6-point centrifugal brake is already installed.


Microcast Spool
for ABU Revo LTX/LTZ/LT
Full Branking Model
RVLTX32RR

Line Capacity 12lb - 50mm
Ultra-lightweight spool for ABU Revo LT / LTX / LTZ


Microcast Spool
for ABU Revo LTX/LTZ/LT
RVLTX21R

Line Capacity 10lb - 50mm
Shallow groove lightweight spool for ABU Revo LT / LTX / LTZ


Microcast Spool
for ABU Revo 2013 Series
RV338R

Line Capacity 12lb - 65mm
ABU Revo 2013 model
Power Crank 5/6 / Big Shooter Compact
Compatible with Revo3 SX-HS


Microcast Spool
for ABU Revo 3 ELITE 7/8
RV352R-IV

Line Capacity 14lb - 90mm
ABU Revo 2013 model Elite 7/8 compatible
The original 6-point centrifugal brake is already installed.


Microcast Spool
for ABU Revo Elite/EliteII/AURORA/Power Crank/STX
RV31R/RV51R MAG

Elite・EliteII・AURORA・Power Crank・STXなど
Spool for Revo with magnetic brake specifications


Microcast Spool
for ABU Revo Elite/EliteII/AURORA/Power Crank/STX
RV31R/RV51R IB

ABU Revo Spool for old IB


Microcast Spool
for ABU Revo CB, AKATSUKI
RV31R/RV51R Centrifugal specification

ABU Revo CB / Akatsuki exclusive spool


Microcast Spool
for ABU Revo S, SX
RV31LS /RV51LS

Lightweight shallow groove spool for ABU Revo S, SX


◆Morrum series Spool


Microcast Spool
for ABU Morrum SX 1600C Ultra MAG, IVCB
[SXUM1640R]

The custom spool corresponding to the 1600th model of the Moram SX series has been renewed and reappeared!
Line capacity that can wind 10lb-65m.


Microcast Spool
for Morrum SX 3600C Ultra MAG, IVCB
[SXUM3640R]

The custom spool corresponding to the 3600th model of the Moram SX series has been renewed and reappeared!
Line capacity that can wind 12lb-70m.


Microcast Spool
for ABU Garcia MorrumZX 1600MAG
ZXMG1628R / ZXMG1648R

Lightweight spool for ABU Moram ZX1600MAG.
Two types of groove depths, 2.8 mm and 4.8 mm, are available.
Supports from bait finesse to cover games.


Microcast Spool
for ABU Garcia MorrumZX 3600MAG ZXMG3648R

Taking advantage of the abundant amount of spools due to the groove depth of 4.8 mm, it is recommended for floating patterns such as cranking and jerk bait in Lake Biwa!


Microcast Spool
ABU Morrum ZX 1600, 1601
ZXUM1638

This is a dedicated spool for ABU Garcia ZX 1600, 1601.


Microcast Spool
ABU Morrum ZX 3600, 3601
ZXUM3638

Dedicated spool for ABU Garcia ZX 3600, 3601.


Microcast Spool
for ABU Morrum SX MAG
SXMG1620R

A shallow groove lightweight spool tuned for mountain stream trout compatible with Moram SX 1600C and 1601C MAG.


Microcast Spool
for ABU Morrum SX MAG
SXMG1640R

A shallow groove lightweight spool tuned for black bass compatible with Moram SX 1600C and 1601C MAG.


Microcast Spool
for ABU Morrum SX 1600C UltraMAG, IVCB
SXUM1620R/SXUM1640/SXUM1638

ABU Morrum SX 1600C,1601C IVCB
Spool for UltraMAG


Microcast Spool
for ABU Morrum SX 3600C UltraMAG, IVCB
SXUM3640
[discontinued]
ABU Morrum SX 3600C ,3601C
Spool for UltraMAG


Microcast Spool
for ABU Morrum SX 1600C MAG
SXMG1636[discontinued]
ABU Morrum SX 1600C, 1601C
Shallow groove lightweight spool for MAG


Microcast Spool
for ABU Morrum SX 3600C MAG
SXMG3636
[discontinued]
ABU Morrum SX 3600C, 3601C
Shallow groove lightweight spool for MAG


Microcast Spool
for ABU Morrum SX 1600C Hi-Speed
SXHS1620R/SXHS1640R

ABU Morrum SX 1600C, 1601C
Shallow groove lightweight spool for Hi-speed


Microcast Spool
for ABU Morrum SX 3600C Hi-Speed
SXHS3620R/SXHS3640R

ABU Morrum SX 3600C, 3601C
Shallow groove lightweight spool for Hi-speed


◆Ambassadeur series 1000 Spool


Microcast Spool
for ABU 1000/1000C
AMB1030R / AMB1050R

Microcast Spool for Ambassadeur 1000, 1000C.
It can be used with both the bronze bushing model Ambassadeur 1000 and the ball bearing model 1000C.


◆Ambassadeur series 1500 Spool


Microcast Spool
Trout special for ABU 1500C Series
AMB1518TR

A trout custom model with blanking specifications developed for ABU Ambassadeur 1500C. Great for area trout and native trout.
Line capacity 6lb-35m


Microcast Spool
for ABU 1500C
AMB1520R / AMB1540R

A new model with "R" specifications is now available on the spool for ABU Ambassadeur 1500C! There are shallow groove model (6lb-40m) and middle groove model (8lb-60m), so please choose according to your preference.


Microcast Spool
for ABU 1500C
AMB1520 / AMB1540[discontinued]
Custom spool for ABU Ambassadeur 1500C.


◆Ambassadeur series 2500 Spool


Microcast Spool
Trout Special for ABU 2500 Series
AMB2518TR

An unlikely trout special for the Ambassadeur 2500 series blanking spool model! Line capacity 6lb-65m


Microcast Spool
for ABU 2500 Series
AMB2520R/AMB2540R/AMB2560R

Lightweight custom spool compatible with Ambassadeur 2500C. There are 3 types depending on the line capacity, so please choose according to your preference.


◆Ambassadeur series 3500 Spool


Microcast Spool
for ABU 3500C Series
AMB3520R/AMB3540R

Medium groove lightweight custom spool that fits Ambassadeur 3500C. From 2019 production, the material of the spool shaft has been changed to extra super duralumin.


Microcast Spool
for ABU 3500C Series
AMB3540R * Old part number titanium shaft

Medium groove lightweight custom spool that fits Ambassadeur 3500C. Line capacity 12lb-65m


◆Ambassadeur series 4500/4600 Spool


Microcast Spool
for ABU 4500CB/4600CB Series
AMB4530R-CB

A shallow groove model of a lightweight custom spool that fits Ambassadeur 4500CB and 4600CB. Line capacity 8lb-60m


Microcast Spool
for ABU 4500CB/4600CB Series
AMB4550R-CB

Lightweight custom spool mid-groove model compatible with Ambassadeur 4500CB and 4600CB. Line capacity 14lb-60m


Microcast Spool
for ABU 4500C [EBISU] Series
AMB4530R-EF

A shallow groove model of a lightweight custom spool that fits the Ambassadeur 4500C (Ebisu). Line capacity 8lb-60m


Microcast Spool
for ABU 4500C [EBISU] Series
AMB4550R-EF

Lightweight custom spool mid-groove model compatible with Ambassadeur 4500C (Ebisu). Line capacity 14lb-60m


Microcast Spool
for ABU 4500C Series
AMB4550UC2

A mid-groove spool that fits the UC (Ultracast) model of the Ambassadeur 4500C series. Line capacity 14lb-60m


Microcast Spool
for ABU 4500C Series
AMB4550UC
[discontinued]
A mid-groove spool that fits the UC (Ultracast) model of the Ambassadeur 4500C series. Line capacity 14lb-60m


◆Ambassadeur series 5000/5500 Spool


Microcast Spool
for ABU 5000 OLD Series
AMB5030R:Broneze Bushing Model

It is a middle groove custom spool that can be attached to the old Ambassadeur 5000, 5000D. Line capacity 12lb-75m


Microcast Spool
for ABU 5000 OLD Series
AMB5050R:Broneze Bushing Model

A deep groove custom spool that can be attached to the old Ambassadeur 5000, 5000D. Line capacity 16lb-70m


Microcast Spool
for ABU 5000 OLD Series
AMB5030R-BB:Ball Bearing Required

A shallow groove custom spool that can be attached to the old Ambassadeur 5000, 5000D.
You can use the old model with bearing specifications by combining it with two 1030ZZ size bearings (sold separately).



Microcast Spool
for ABU 5000 OLD Series
AMB5050R-BB:Ball Bearing Required

A shallow groove custom spool that can be attached to the old Ambassadeur 5000, 5000D.
You can use the old model with bearing specifications by combining it with two 1030ZZ size bearings (sold separately).


Microcast Spool
for ABU 5000 OLD Series
AMB5030R-C

It corresponds to Ambassadeur 5000C, 5001C, and corresponds to the model manufactured from the initial model to around 1984. Line capacity 12lb-75m


Microcast Spool
for ABU 5000 OLD Series
AMB5050R-C

It corresponds to Ambassadeur 5000C, 5001C, and corresponds to the model manufactured from the initial model to around 1984 in the Ebisu fishing era. Line capacity 12lb-110m


Microcast Spool
for ABU 5500 OLD Series
AMB5530R

A lightweight custom spool mid-groove model that fits the old model of the Ambassadeur 5500. Line capacity 12lb-75m


Microcast Spool
for ABU 5500 OLD Series
AMB5550R

A deep groove model with a lightweight custom spool that fits the old model of the Ambassadeur 5500. Line capacity 16lb-70m


Microcast Spool
for ABU 5500C OLD [70's] Series
[The spool rim level is 3 mm]

Ambassadeur released in the 1970s, a mid-groove custom spool compatible with the so-called old ab. Line capacity 12lb-75m


Microcast Spool
for ABU 5500C OLD [70's] Series
[The spool rim level is 5 mm]

Ambassadeur released in the 1970s, a deep groove custom spool compatible with the so-called Old Abu. Line capacity 16lb-70m


Microcast Spool
for ABU 5500C [MAMIYA] Series
AMB5530R-OA

A medium groove lightweight custom spool compatible with the Mamiya era model of the Abu Ambassadeur 5500C. Line capacity 12lb-75m


Microcast Spool
for ABU 5500C [MAMIYA] Series
AMB5550R-OA

A deep groove lightweight custom spool compatible with the Mamiya era model of the Abu Ambassadeur 5500C. Line capacity 16lb-70m



Microcast Spool
for ABU 5000AL/5500C Palming (OA Sticker Model)/5500C Syncro (EF Sticker Model)/5500 Striper (Click type Model)
AMB5030R-AL

Medium groove lightweight custom spool suitable for Abu Ambassadeur5000AL, 5500C palming, 5500C synchro, 5500 striper (clicker model), etc. Line capacity 12lb-75m



Microcast Spool
for ABU 5000AL/5500C Palming (OA Sticker Model)/5500C Syncro (EF Sticker Model)/5500 Striper (Click type Model)
AMB5050R-AL

A deep groove lightweight custom spool suitable for Abu Ambassadeur 5000AL, 5500C palming, 5500C synchro, 5500 striper (clicker model), etc. Line capacity 16lb-70m


Microcast Spool
for ABU 5500C Series
AMB5550UC2

A mid-groove spool that fits the UC (Ultracast) model of the Ambassadeur 5500C series. Line capacity 16lb-80m


Microcast Spool
for ABU 5500C Series
AMB5550UC
[discontinued]
A mid-groove spool that fits the UC (Ultracast) model of the Ambassadeur 5500C series. Line capacity 16lb-80m


◆Ambassadeur series 6500 Spool


Microcast Spool
for ABU 6500C Series
AMB6550UC

A mid-groove spool that fits the UC (Ultracast) model of the Ambassadeur 6500C series. Line capacity 16lb-100m


◆Ambassadeur series Parts


Aluminum Offset frame 2.0
for ABU 2500C

Lightweight frame for Ambassadeur 2500C with 2.0 mm offset.


Aluminum Offset frame 7.5
for ABU 1500C

Weight is reduced and the foot position is raised, improving palming performance!


Aluminum Offset frame 7.5
for ABU 2500C

Weight is reduced and the foot position is raised, improving palming performance!


Palming Plate
for ABU Ambassadeur 2500C/2501C

A lightweight palming plate made of extra super duralumin that is compatible with 1500C and 3500C including Ambassadeur 2500C.


Brake Plate
for Ambassadeur 2500C IAR/2500C/2501C

A lightweight brake plate exclusively for the 2500C IAR/2500C/2501C model made of extra super duralumin.


Side Cup Nut Set for ABU 2500C

ABU Ambassadeur 1500C, 2500C, 3500C side cup compatible nut fixing product.


Microcast Brake
for ABU 1500-3500
AMB1520/AMB1540

Avail spool magnet brake for Ambassadeur 1000-3000.


Microcast Brake
for ABU 4000-6000
CR2 /CL2

ABU Garcia Ambassadeur 4000 5000 No. 6000 Magnet Brake


Microcast Brake
for only Avail Microcast Spool AMB1518TR AMB1518

Custom spool for Avail Ambassadeur Magnet brake compatible with AMB1518TR.


Microcast Brake
for only Avail Microcast Spool AMB2518TR AMB2518

This is a magnet brake for AMB2518TR spool, which was developed for trout exclusively for Avail Ambassadeur 2500C model.


Neodymium Magnet

Compatible with Avail magnet brakes for Abu
A neodymium magnet that can be incorporated into Avail magnet brakes that are compatible with Abu reel.


4P-Brake [UC]
for ABU Garcia Ambassadeur 4000-6000

Centrifugal brake unit for Ambassadeur series.
Compared to genuine brakes, the number of brake shoes can be increased, so it is recommended when you want to use the brakes more.


4P-Brake
for ABU Garcia Ambassadeur 2500C / SX Hi-speed
4P Brake 25C/4P Brake SXHS

Changed the genuine 2-point brake (centrifugal brake) to a 4-point brake.


4P-Brake
for RVEL
[with 4 Brake Blocks]
Centrifugal brake unit attached to the avail spool that can be attached to Akatsuki, Elite CB, and Revo S.


Brake Block Compatible products
ABU Brake Block Bakelite [4 pieces]

Ambassadeur Brake block that can be used for reel brake units.


Aluminum Click Wheel with built-in Bushing
for Ambassadeur 1500C, 2500C, 3500C series

It is a new type of aluminum click wheel that integrates the genuine ABU part "#22001 HANDLE BUSHING" with the "aluminum click wheel for 2500C".


Aluminum Click Wheel
for Ambassadeur 1500C, 2500C, 3500C series

By replacing stainless steel with extra super duralumin, it is lighter.


Aluminum Main Gear Bushing
for Ambassadeur 1500C, 2500C, 3500C series

The material is changed from brass used in genuine products to extra super duralumin, making it lightweight.


Titanium 64 Clutch Return Plate TI64-CRP (#23188 WHEEL)
for ABU Ambassadeur 1600C/2600C, Morrum SX MAG series

Lightweight titanium 64 alloy is used as the material, and weight reduction can be expected by replacing it with a genuine stainless steel product.
For Ambassadeur 1600C, 2600C only


Titanium 64 Drive Gear Plate TI64-DGP (#25802)
for Abu Morrum ZX/SX series

Lightweight titanium 64 alloy is used as the material, and weight reduction can be expected by replacing it with a genuine stainless steel product.
For Morrum ZX series only


Ultra Light Level Winder Set
for ABU 2500C

A lightweight level wind that can be attached to Ambassadeur 1500-3500.


Ultra Light Level Winder Set
for ABU 5500
C
A lightweight level wind that can be attached to Ambassadeur 4000-6000.


Pilot Guide Cap
for ABU 2500C / 5500C

It is a single cap included in the Ultra Light Level Winder Set.


Aluminum Worm Shaft 2BB model
for ABU 1500C/2500C

Aluminum worm shaft 2 ball bearing model for ABU Ambassadeur 1500C, 2500C.
By using lightweight materials and supporting 2-ball bearings, it is possible to reduce weight and improve rotational performance.


Aluminum Level Wind Pipe GOLD-PLATED
for ABU Ambassadeur 2500C

Color change parts exclusively for Avail's "Aluminum Warm Shaft WS-25C-2BB 2500C".
Please use it only for display.


Aluminum Worm Shaft, Aluminum Level Wind Pipe
for ABU 1500C/2500C

Warm shaft for ABU Ambassadeur 1500C, 2500C, level wind pipe separately.


COGWHEEL
ABU #5152 / #23404

Cog wheels used for 1500C, 2500C, etc., bearings and weight reduction increase flight distance


COGWHEEL
ABU #10255

For reels using genuine part numbers #10255 and #1152469 such as ABU 1500/2500 series

PINION BUSHING BB KIT
13462 PINION BUSHING BB KIT

Easy clutch operation for 1500C, 2500C, etc.!


High Speed Gear Set Type 2 for ABU Ambassadeur 1500C/1600C/2500C/2600C

Redesigned version 2022!
To upgrade the clutch feeling and to make the reeling lighter


Hi Speed Gear Set
for Abu Ambassadeur 1500C, 1600C, 2500C, 2600C

Greatly increased retrieve speed.


High Speed Main Gear
for Abu Ambassadeur 1500/2500 series



High Speed Pinion Gear
for Abu Ambassadeur 1500/2500 series



Nezumigaeshi 7000, 7001

for ABU Garcia Ambassadeur 7000/7001
Line trouble prevention plate


E-ring
Inner diameter 2.4 mm x outer diameter 6 mm

ABU 1500C, 2500C etc.
Stainless steel E-ring for microcast spool shaft.


Spool Shaft Spring
for ABU 1500C, 2500C series (Compatible with the ABU spare part No.10256)

It is a compatible product spring attached to the spool shaft of ABU Ambassadeur 2500C etc.


Aluminum Clutch Lever ZX
Higher type Lower type
for Morrum SX/ZX series

Aluminum clutch for SX and ZX series
Two heights


◆Star Drag

Round Drag SD-AB-C1R Round Drag SD-AB-C1L
Round Drag
for Abu 2500C
SD-AB-C1R/SD-AB-C1L

An original drag exclusively for the Ambassadeur 2500C model.
Weight reduction can also be expected.

Short Round-Tipped SD-AB-MSTR-S Short Round-Tipped SD-AB-MSTL-S
Star Drag Short Round-Tipped
for ABU Morrum / Ambassadeur
SD-AB-MSTR-S/SD-AB-MSTL-S

Teardrop type, short version of the star drag for ABU Ambassadeur.

Star Drag Short
Star Drag Short
for Morrum, Ambassadeur series
SD-AB-S5R

A short version of the Star Drag for ABU Ambassadeur.


Star Drag
for ABU Morrum / Ambassadeur
SD-AB-KSTR/KSTL/KOFR/KOFL

Two types of shapes can be expected to dress up and reduce weight.


Star Drag
for Abu Morrum SX Ultra MAG / Morrum ZX
SD-AB-ZXUM

Moram Ultra Mug Moram ZX Star Drag, also expected to be lighter.


Star Drag
for Revo:Second model
SD-RV-R/SD-RV-L

The click sound remains the same! Weight reduction can also be expected.


Star Drag for
Revo:First model
SD-RVSS-R/SD-RVSS-L

You can expect weight reduction while keeping the click sound.
Compatible reels are Elite CB / S / SX / STX, etc.

WASHER-DRAG
WASHER
WASHER-DRAG
(1 Piece) Gold

Washer for drag adjustment.


◆Mechanical Brake Knob


Mechanical Brake Knob Type 2
for ambassadeur
BCAL-25C-2

A mechanical brake knob that can be attached to Ambassadeur 1500-3500.


Mechanical Brake Knob
for ambassadeur
BCAL-25C

A mechanical brake knob that can be attached to Ambassadeur 1500-3500.

Mechanical Brake Knob 55ST for Ambassadeur
Mechanical Brake Knob
for ambassadeur
55ST

Avail's original mechanical brake knob for ABU Ambassadeur.

Mechanical Brake Knob 55FL for Ambassadeur
Mechanical Brake Knob
for ambassadeur
55FL

Avail's original mechanical brake knob for ABU Ambassadeur.


Mechanical Brake Knob
for Revo LTX
BCAL-LTX

It is a custom part of single color alumite that can be attached to 16LTX series, old LTX, Deez6, etc.


Mechanical Brake Knob
for Revo [Old]
BCAL-RV

You can choose from 10 color variations.


◆Handle Parts


Handle Lock Nut M8
for ABU / DAIWA

Aluminum handle nut for ABU The size is M8


Handle Lock Nut M9
for ABU
Ti64 alloy handle nut for ABU The size is M9


HANDLE RETAINER for Abu
10mm

Retainer available for ABU 1500C, 2500C, etc.


HANDLE RETAINER for Abu
12.5mm

Retainer available for 4500C, 5500C, SX series, etc.

 ISUZU / Pagani Baitcasting Reels Parts


Microcast Spool
for ISUZU BC420 PESCATORE
Trout Special Model
BCP4220TR

A trout special model that makes casting fun with ultra-lightweight lures such as floating minnows made by Barcelona.


Microcast Spool
for ISUZU BC420 SSS Series
Trout Special Model
BC4215TR

A trout special model that makes casting fun with ultra-lightweight lures such as floating minnows made by Barcelona.


Microcast Spool
for ISUZU BC420 SSS Series
Trout Special Model
BC4227R

Microcast Spool
For ISUZU BC420 SSS series


Microcast Spool
for ISUZU BC520 Series
Trout Special Model
BC5224TR2

The changes in version 2 are the change in the material of the brake block and the size of the ball bearing.


Microcast Spool
for ISUZU BC520 Series
Trout Special Model
BC5224TR

A trout special model that makes casting fun with ultra-lightweight lures such as floating minnows made by Barcelona.


Microcast Spool
for ISUZU BC520 Series
BC5240R2

Equipped with a 6-point centrifugal brake, it has been renewed to R2.
Since you can get strong braking power, you can comfortably cast heavy lures like big spoons.


Microcast Spool
for ISUZU BC520 Series
BC5240R

This spool is recommended for the style of casting small to medium-sized top water plugs such as Heddon, Arbogast, and labels at a good tempo.


Microcast Spool
for ISUZU BC520X Series
BC5252R2

Equipped with a 6-point centrifugal brake, it has been renewed to R2.
Since you can get strong braking power, you can comfortably cast heavy lures like big spoons.


Microcast Spool
for ISUZU BC520X Series
BC5252R

Microcast Spool
For ISUZU BC520X series


Microcast Brake for ISUZU BC series
MB-BC

Spare parts for centrifugal brake blocks that can be used for custom spools for Avail ISUZU reels.


ISUZU compatible brake block 3mm

Spare parts for centrifugal brake blocks that can be used for custom spools for Avail ISUZU reels.

Brake Block 3.5mm SLIM

B-BLOCK-3.5-SLIM
Spare parts for centrifugal brake blocks that can be used for custom spools for Avail ISUZU reels.


Brake Block 4mm SLIM

B-BLOCK-4-SLIM
Spare parts for centrifugal brake blocks that can be used for custom spools for Avail ISUZU reels.

 Tailwalk Baitcasting Reels Parts


Microcast Spool
for Tailwalk SUPER ELAN
ELSP28R
[discontinued]
Includes 4 original 4-point centrifugal brakes and brake blocks.
The cast of lightweight lures is more comfortable.


Microcast Spool
for Tailwalk ELAN MTX/PG/MICRO TUNE
ELMT28R
[discontinued]
Includes 4 original 4-point centrifugal brakes and brake blocks.
The cast of lightweight lures is more comfortable.

 SHIMANO Baitcasting Reels Handle


New Offset (Swept) Handle LT for SHIMANO
HD-SH-LT

"Complete Kit"
The lightest handle that is ideal for light lures such as bait finesse.
A great value complete set with EVA knobs, locknuts, bearings, etc.


New Offset (Swept) Handle STi 2 & STi 2.5 for SHIMANO
HD-SH-STi2

"Complete Kit"
Lightweight and highly rigid, this handle is perfect for all-rounders.
A great value complete set with EVA knobs, locknuts, bearings, etc.


Offset (Swept) Handle STi for SHIMANO
HD-OF-13MT-A

"Complete Kit"
Lightweight and highly rigid, this handle is perfect for all-rounders.
A great value complete set with EVA knobs, locknuts, bearings, etc.


New Offset (Swept) Handle LT for SHIMANO
HD-SH-LT

The lightest handle that is ideal for light lures such as bait finesse.


New Offset (Swept) Handle STi 2 & STi 2.5 for SHIMANO
HD-SH-STi2

Lightweight and highly rigid, this handle is perfect for all-rounders.


Adjustment washer of Swept Handle STi 2 0.5mm

Adjustment washer for STi 2 handle


Offset (Swept) Handle STi for SHIMANO
HD-OF-13MT-A

Lightweight and highly rigid, this handle is perfect for all-rounders.


Offset (Swept) Handle for SHIMANO
HO-SH-STA

The original offset star drag.
It is necessary to replace the star drag for installation.


WISHBONE Handle for SHIMANO
WB-SH-STA

Wishbone name comes from the suspension arm of the car


WISHBONE Handle
for 12 CALCUTTA
WB-12CC

Wishbone handle is now available exclusively for 12 CALCUTTA!

A href="https://www.hedgehog-studio.co.jp/phone/product/1640">
Handle Lock Nut for SHIMANO (M7)
A lightweight and rigid nut made by carving duralumin. Please use it for Avail's custom handle.


Handle Nut M7 for SHIMANO Genuine Handle
* Compatible with latest models

A new nut for SHIMANO genuine handles equipped with a resin retainer.

 AbuGarcia / DAIWA Baitcasting Reels Handle


New Offset (Swept) Handle LT for DAIWA/ABU
HD-AB-LT

"Complete Kit"
The lightest handle that is ideal for light lures such as bait finesse.
A great value complete set with EVA knobs, locknuts, bearings, etc.


New Offset (Swept) Handle STi 2 for DAIWA/ABU
HD-AB-STi2

"Complete Kit"
Lightweight and highly rigid, this handle is perfect for all-rounders.
A great value complete set with EVA knobs, locknuts, bearings, etc.


Power (Swept) Handle T4S for DAIWA/ABU
PH-T4S

"Complete Kit"
A handle exclusively for power fight that boasts the strongest rigidity.
A great value complete set with EVA knobs, locknuts, bearings, etc.


Offset (Swept) Handle for DAIWA/ABU
HO-AB-STA

"Complete Kit"
The first offset handle with the deepest offset curve.
A great value complete set with EVA knobs, locknuts, bearings, etc.


New Offset (Swept) Handle LT for DAIWA/ABU
HD-AB-LT

The lightest handle that is ideal for light lures such as bait finesse.


New Offset (Swept) Handle STi 2 for DAIWA/ABU
HD-AB-STi2

Lightweight and highly rigid, this handle is perfect for all-rounders.


Offset (Swept) Handle for DAIWA/ABU
HO-AB-STA

The first offset handle with the deepest offset curve.


Power (Swept) Handle T4S for DAIWA/ABU
PH-T4S

A handle exclusively for power fight that boasts the strongest rigidity.


WISHBONE Handle for DAIWA/ABU
WB-AB-STA

A straight handle with a simple design that is perfect for classical reels such as round reels.


S TRAD HANDLE
HD-S-TRAD for ABU/ISUZU
An S-shaped handle that matches the round and classically designed reels.


S TRAD HANDLE for Baitcasting Reel
HD-S-TRAD for ABU/ISUZU/DAIWA

Compatible with reels that use M8 standard handle nuts


Pure handle S Type 2 for ABU/ISUZU/DAIWA
HD-S-PURE Type 2

Pure Handle S is renewed. Simple design allows installation of S-size knobs.


Pure handle S for ABU/ISUZU/DAIWA
HD-S-PURE

A handle with a simple design that can be attached with an S size knob. Recommended for Ambassadeur.


Single Pure[Standard] Handle S for DAIWA/ABU
HD-AB-SPS

It is a single handle type for bait reels that is often seen in old abu. The feature is that a balancer is attached to one side of the handle instead of a knob.


Pure (Standard) Handle for ABU/SHIMANO(BANTAM)
PURE-AB

Simple is the best
Increased rigidity in addition to weight reduction


Handle Lock Nut(M8) for ABU/DAIWA

Aluminum handle nut for ABU. The size is M8


Handle Lock Nut (M9) for ABU

Ti64 alloy handle nut for ABU. The size is M9

 SHIMANO Spinning Reels Handle


Spinning Handle
for SHIMANO
HDSP-S2

An ultra-lightweight handle for small size spinning reels such as area trout and light salt games.


Spinning Skirt S for Spinning Handle
SPSK-S

It is a custom part that can change the color of Avail's new spinning handle, HDSP-S2 skirt.

 AbuGarcia Cardinal Spinning Reels Parts


ABU Cardinal 3 series Shallow Spool
CD0450R/CD0490R/CD0590R

ABU's old spinning reel
Spool for Cardinal 3


TOUGH BOX Handle HDT-CD [without Knob]
ABU Cardinal 3/4 Series

You can use it by attaching your favorite handle knob. We also added a new color Gold-plated


TOUGH BOX Handle
for ABU Cardinal 3/4 Series
HD-CD

Direct handle that contributes to weight reduction and rigidity increase


PROTECTING RING
for Cardinal 3 Series/4 Series
P-RING-CD34



FELT WASHER of PROTECHTING RING
for Cardinal 3 Series/4 Series
FELTWASHER-P-RING



ALUMINUM Drag Knob
for Cardinal 3

The drag click pitch becomes finer, allowing for finer adjustments.


TITANIUM 64 SCREW SET
for Cardinal 3

Titanium 64 alloy is used for weight reduction


ALUMINUM BAIL MOUNT SCREW
for Cardinal 3

Suppress unnecessary blurring during reeling!

 SHIMANO / DAIWA / AbuGarcia Handle Knob & Other Parts


Handle Nut Retainer B-Type for Offset Handle

Comes with the offset handle set.

EVA KNOB Type-A
EVA KNOB Type-A

Uses a large hard EVA to prevent slipping and has excellent grip.
This knob is recommended for power games.。

EVA Knob Type-R
EVA Knob Type-R

It is a large knob that uses hard EVA, and has the same dimensions as the A type, but the thin part of the shaft is longer, so it is easier for your fingers to get caught with a lighter force.

EVA KNOB Type-SLIM
EVA KNOB Type-SLIM

A slim type is now available for the popular EVA knob.
A versatile size that matches any reel in a well-balanced manner.

POM KNOB2 BLACK
POM KNOB 2 BLACK

Uses a lightweight resin material.

POM KNOB2 WHITE
POM KNOB 2 WHITE

Uses a lightweight resin material.
Simple is the best knob.


WOOD KNOB 2

A knob with a texture carved from natural wood.
You can choose from 3 types of materials.

WOOD KNOB for FLATWOOD KNOB for FLAT
WOOD KNOB for FLAT

A flat knob with a texture carved from natural wood.
You can choose from 3 types of materials.

WOOD KNOB Round Shaped WOOD KNOB Round Shaped
WOOD KNOB Round Shaped

A knob with a texture carved from natural wood.
You can choose from 3 types of materials.


Marble Handle Knob Regular

Avail handle knob with a unique pattern


Marble Handle Knob Short

Avail handle knob with a unique pattern

ACRYLIC KNOB ACRYLIC KNOB
ACRYLIC KNOB

Uses a transparent and colorful acrylic material.
A rich color lineup of 11 colors.

GM Handle Knob Cap GM Handle Knob Cap
GM Handle Knob Cap

Stylish around the knob shaft screw
Avail original knob series exclusive product

GM Handle Knob Cap for Wood Flat Knob GM Handle Knob Cap for Wood Flat Knob
GM Handle Knob Cap for Wood Flat Knob
* Avail Wood flat knob exclusive model

Stylish around the knob shaft screw
* Avail Wood flat knob exclusive model


ALUMINUM KNOB CAP for DAIWA

Suitable for RCS type I cork knob


Oval Knob Cap for DAIWA

Compatible with various knobs on DAIWA reels
Perforated specifications that are easy to remove

S-TRAD Wood Handle Knob S-TRAD Wood Handle Knob
S-TRAD Wood Handle Knob
Black Ebony / Santos Rosewood

This is a handle knob exclusively for Avail S Trad Handle.

S-TRAD POM Handle Knob
S-TRAD POM Handle Knob
POM WHITE

It is a handle knob exclusively for Avail S Trad handle.


S-TRAD Acrylic Handle Knob

This is a handle knob exclusively for Avail S Trad Handle.

Maintenance Oil for Wood Knob
Maintenance Oil for Wood Knob

A natural oil that is ideal for cleaning wood knobs.

S-TRAD Handle Knob Fixing Screw S-TRAD Handle Knob Fixing Screw
S-TRAD Handle Knob Fixing Screw

You can change the color of the knob fixing screw of the Avail S Trad handle.

Side Cup Nut Driver Side Cup Nut Driver
Side Cup Nut Driver

Flat head screwdriver for use with the Ambassadeur 2500 series.

Original Short Offset Wrench Original Short Offset Wrench
Original Short Offset Wrench

Compact short model

OFFSET WRENCH OFFSET WRENCH
OFFSET WRENCH

A wrench with opposite sides of 10 mm and 11 mm.
It also makes it easier to install a handle with a recessed retainer.


ORIGINAL ALUMINUM WRENCH

[discontinued]
Made of aluminum that does not easily damage the handle nut
It is also convenient when replacing the aluminum knob shaft.


NEODYMIUM MAGNET

It is a magnet that can be attached to the magnet plate and each magnet brake.


Avail Original Goods

Avail Original Goods
Water resistant sticker


STICKER-HISPEED

A Sticker that comes with the Avail High Speed Gear Set.


CARBON CROSS DRAG WASHER
DWASHER-CC

Carbon cross drag washer with excellent start-up characteristics compared to genuine drag washer