HEDGEHOG STUDIO

[STUDIO Ocean Mark] SHIMANO 20-13 SW NO LIMITS Spool for STELLA SW, TWIN POWER SW

HEDGEHOG STUDIO — 2026-08-20T18:03:02+09:00

| Multi-Cut Ring (A7075T6 Material)

With the evolution of guide shapes and PE lines, the backlash and air knots that occurred in the early days have been greatly reduced, and the performance required of a spool has shifted from trouble-free operation to casting distance.

Studio Ocean Mark has been developing oval rings aimed at trouble-free performance since 2007.
By changing the generally perfect-circle shape into an oval shape, this spool ring continuously varies the contact resistance of the released line against the ring, creating a slight feathering effect that effectively prevents line trouble.
The new Multi-Cut Ring advances the concept of the oval ring, achieving both trouble prevention and increased casting distance.

During a cast, the line is released after clinging tightly along the spool ring with force.
Thanks to the multi-cut surfaces provided on the lower part of the spool, the contact distance during line release continuously alternates between long and short,
and the resistance created by this difference produces the same feathering effect as the oval ring, preventing line trouble.

As the casting speed of the lure drops, the speed of the line released from the spool surface also drops, the release loop grows larger, and the line only slightly contacts the upper part of the spool.
The taper angle of the spool ring is set close to that of surf reels designed for ultra-long-distance casting, so minimal release resistance delivers extended casting distance in the latter half of the cast.

| New-Shape Radiator Unit

A machine-cut radiator unit is fitted beneath the drag system, and a spool rotating at high speed simultaneously enhances the heat dissipation performance of the radiator unit.
In lab testing under extremely severe conditions, it suppressed the temperature rise by more than 30% and maintained stable drag power.

| 30000 Size

We developed a dedicated spool compatible with the STELLA SW30000, which boasts one of the largest line capacities in the world.
To compensate for the reduction in drag power that is the weak point of large-diameter spools, a drag system is also provided on the spool shaft to support drag power.
Combined with the drag system inside the skirt, a maximum drag force of 22kg is secured by hand tightening.
It is also equipped with the series' latest Multi-Cut Ring / new-shape radiator unit, supporting fierce fights against marlin on spinning tackle and giant tuna.

| 8000 Size

The 19 STELLA SW/8000 was released as a dedicated model sharing the same body while making the rotor size more compact.
The 8000, with its light stop-and-go rotation, has earned a high reputation in the market, and we received many requests to develop a spool for it.

19SW9800HP (HP = High Power Specification)
The spool ring diameter is secured at its maximum, giving a line capacity setting of PE 6-250/5-300m. This is the same line capacity as the SHIMANO 10000 size, so it is also possible to spool 6 and target GT or hiramasa (yellowtail amberjack). Meanwhile, 5 is the best size for coastal yellowfin tuna games and shore-casting for amberjack in the Kanto region.

19SW7900RC (RC = Rocket Cast Specification)
The line-winding diameter for 4-300m is set to the same value as the Genuine spool, while the spool ring diameter is reduced to the smallest possible size. Since the winding diameter is the same, the retrieve per handle turn is unchanged, so it can be used with the same fishing rhythm as the Genuine spool without any sense of difference. The merit of the small-diameter spool ring is that during underhand casts with a jigging rod fitted with small-diameter guides, the line does not strike the butt guide, releasing smoothly and reducing casting trouble.

| Waterproof Performance

A waterproof rubber is fitted to the topmost drag washer.
It effectively blocks saltwater intrusion, the greatest weakness of carbon washers.

| Drag Washer

A USA-made carbon material dedicated to drag washers is used.
A fine plain weave was selected from many grades, delivering smooth initial movement and maximum frictional resistance.

| Pure Teflon Grease

A pure Teflon grease using Teflon oil and Teflon powder additives.
It adopts the highest-level drag grease in the history of fishing tackle, so there is no drag seizure caused by grease loss even when fighting the largest class of fish.

| Specifications

Item ITEM	Color COLOR	Line Capacity LINE CAPACITY	Drag Max DRAG POWER	Compatible Reel REEL	Price PRICE
NO LIMITS 20SW30000BM	DT (Deep Titanium)	YGK WX Series PE15-320/12-450/10-570/8-750 YGK ODD PORT PE12-400/10-500	25kg	19 STELLA SW 13 STELLA SW 30000	36,000
	BG (Black Gold)
	BD (Black Dark Silver)
NO LIMITS 20SW23000BM	BG (Black Gold)	YGK WX Series PE12-300/10-400/8-500 YGK ODD PORT PE12-270/10-350/9-390		19 STELLA SW 13 STELLA SW 20000/18000	33,000
	BD (Black Dark Silver)
NO LIMITS 13SW18000HP Ver2	DT (Deep Titanium)	PE8-300/6-400			26,500
	BG (Black Gold)
	BD (Black Dark Silver)
NO LIMITS 13SW17000RC Ver2	DT (Deep Titanium)	PE7-300/6-350
	BG (Black Gold)
	BD (Black Dark Silver)
NO LIMITS 20SW16000HP	BG (Black Gold)	PE6-300/5-350	17kg	19 STELLA SW 21 TWIN POWER SW 14000/10000 13 STELLA SW 15 TWIN POWER SW 14000/10000/8000	26,500
	BD (Black Dark Silver)
	RB (Royal Blue)
NO LIMITS 19SW10000RC	DT (Deep Titanium)	PE6-250/5-300			23,000
	BG (Black Gold)
	BD (Black Dark Silver)
NO LIMITS 13SW8000RC Ver2	DT (Deep Titanium)	PE4-300/3-400			22,500
	BG (Black Gold)
	BD (Black Dark Silver)
NO LIMITS 19SW9800HP	BG (Black Gold)	PE6-250/5-300		19 STELLA SW 21 TWIN POWER SW 8000	23,000
	BD (Black Dark Silver)
	RB (Royal Blue)
NO LIMITS 19SW7900RC	DT (Deep Titanium)	PE4-300/3-400			22,500
	BG (Black Gold)
	BD (Black Dark Silver)
	RB (Royal Blue)

*Spool 13SW30000BM is a dedicated model for the STELLA SW30000 and is not compatible with other sizes.
*Spools 13SW16000/8000 and 19SW10000 can be mounted on the 19 STELLA SW 14000/10000, but cannot be mounted on the 19 STELLA SW 8000.
*Spools 19SW9800/7900 are dedicated models for the 19 STELLA SW 8000 and are not compatible with other sizes.
*The strength design conforms to the PE lines indicated. Please note that using nylon line, PE line with high elongation, or ultra-fine PE line may cause the spool body to deform.

| Lineup 23000BM/16000HP/10000RC/9800HP/7900RC

| Lineup 30000BM/18000HP/17000RC/8000RC

[SHIMANO Genuine] YUMEYA Aluminum Reel Stand

HEDGEHOG STUDIO — 2026-08-20T17:49:35+09:00

■ Product Features

Redesigned long-selling of the reel stand.
3 color of the select possible suit your reel from within.

· Own weight: about 5.5g

■ Color

Silver

Gray

Gold

Red

Blue

■Compatibility

◆SHIMANO

・18 STELLA
・14 STELLA
・10 STELLA
・07 STELLA

・17 TWINPOWER XD
・15 TWINPOWER
・11 TWINPOWER
・08 TWINPOWER

・18 STRADIC SW
・16 STRADIC CI4+
・15 STRADIC

・19 Vanquish
・16 Vanquish
・13 Vanquish Limited Edition
・12 Vanquish

・17 SUSTAIN

・17 EXSENCE
・13 EXSENCE LB
・11 EXSENCE LB SS
・10 EXSENCE LB
・12 EXSENCE CI4+
・10 EXSENCE CI4
・09 EXSENCE
・14 EXSENCE BB

・18 SEPHIA BB
・17 SEPHIA CI4+
・15 SEPHIA SS
・12 SEPHIA CI4+
・08 SEPHIA CI4
・09 SEPHIA
・06 SEPHIA
・13 SEPHIA BB

・12 RARENIUM CI4+
・09 RARENIUM CI4

・11 BIOMASTER
・08 BIOMASTER

・17 ULTEGRA
・12 ULTEGRA

・18 Soare BB
・17 Soare CI4+
・13 Soare CI4+
・10 Soare CI4
・07 Soare
・07 Soare 30
・08-11 Soare BB

・17 COMPLEX CI4+
・13 COMPLEX CI4+
・10 COMPLEX CI4

・13-14 AR-C AERO CI4+

・炎月-ENGETSU

・12 CARDIFF CI4+
・CARDIFF AREA

・BB-X　10-09 TECHNIUM Mg
・BB-X　06 TECHNIUM Mg
・BB-X　12 Remare
・BB-X　06 尾長-ONAGA Special
・BB-X　13-14 HYPERFORCE
・BB-X　08-10 HYPERFORCE Mg

・BB-X　16 DESPINA
・BB-X　11 DESPINA

・BB-X　16 Larissa
・BB-X　11 Larissa

※Compatible with the spool number 500 to C5000

(For the corresponding model of the reel stand-cap)

to many of the manufacturer's website, only a part of the reel name at the time of product launch are not listed in the corresponding models.
But, there are many things that are also compatible with reel of more new latest model in practice.

With respect to the reel that are not listed on the manufacturer's home page, it is what has been published in HEDGEHOG STUDIO own investigation.
As long as it is purchased from HEDGEHOG STUDIO, please do not worry because it will be attached guarantee those of other manufacturers.

Other, If you have any questions compatible models, please do not hesitate to contact us.

Full Lineup of Major Brands! “Reel Stand & Handle Cap Special Feature”
You can also check compatibility with the latest reel models here.

[DAIWA Genuine] 15 SALTIGA 6500H Spare Spool Product Code: 00059561 No.9 Spool (2-9) Part Code: 6J190101 *Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T14:40:33+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

| Product Concept

(DAIWA Genuine)

Genuine spool for the 15 SALTIGA 6500H. Model equipped with the 2015 new version drag, ATD.
Please use it as a spare for your fishing trips, or as a backup in case of emergency.

- Weight : Approx. 133.2g
- Line Capacity : PE Line #5-500m / #6-400m / #8-300m

[SHIMANO Genuine] 23 CALCUTTA CONQUEST MD 400 Spare Spool

HEDGEHOG STUDIO — 2026-08-20T14:13:48+09:00

Product Description

This is SHIMANO genuine spool equipped on 23 CALCUTTA CONQUEST MD 400 series.

You may use as an extra spool with different line strength.

Line Capacity

Nylon (lb-m)
20-235, 25-200

Supported Models

- 23 CALCUTTA CONQUEST MD
( 400XG, 400XGLH, 401XGLH )

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the CALCUTTA Series Are Available Here!

[SHIMANO Genuine] 23 CALCUTTA CONQUEST MD 300 Spare Spool

HEDGEHOG STUDIO — 2026-08-20T14:13:17+09:00

Product Description

This is SHIMANO genuine spool equipped on 23 CALCUTTA CONQUEST MD 300 series.

You may use as an extra spool with different line strength.

Spec

Line Capacity (lb-m)
20-160, 25-135

Supported Models

- 23 CALCUTTA CONQUEST MD
( 300XG, 300XGLH, 301XGLH )

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the CALCUTTA Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 23 CALCUTTA CONQUEST BFS XG LEFT Product code: 045713**Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T14:11:56+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship this item after you order unless we have in stock at the time of your order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.94 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/5768

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "35 / ROLLER CLUTCH", "92 / BALL BEARING" and "93 /SPOOL CLUTCH PIN ", they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

*F01 13YQ0 REEL BAG (ACCESSORY) 11.00

1 10DN7 FIXING BOLT 1.65

2 10RZU RETAINER 1.10

3 10RZZ HANDLE FIXING NUT 4.95

4 10SML HANDLE CAP 4.95

5 10DQN FIXING BOLT 1.65

6 104VX BALL BEARING (4X7X2.5) 13.75

7 13PK1 WASHER 1.10

8 1004X HANDLE KNOB 11.55

9 13Y7Z HANDLE SHAFT ASSEMBLY 34.10

10 13Y80 HANDLE ASSEMBLY 112.20

11 13V36 HANDLE HOLDER WASHER 1.65

12 10KXV STAR DRAG CLICK PLATE 1.65

13 10J1Y STAR DRAG CLICK PLATE 1.65

14 10B27 CLICK PIN 1.65

15 10988 CLICK SPRING 1.65

16 13Y87 STAR DRAG 22.00

17 100CU WASHER 1.10

18 10A71 STAR DRAG SPRING 2.75

19 10A0C STAR DRAG FIXING NUT 2.75

20 10J1N STAR DRAG SPACER 1.65

21 10D60 MAIN GEAR WASHER (C) 1.65

22 105PW STAR DRAG BEARING WASHER 1.10

23 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

24 1027V O-RING 1.65

25 13Y88 MECHANICAL BRAKE KNOB 20.35

26 10896 MECHANICAL BRAKE WASHER 1.10

27 1057S SPOOL SHAFT CONTACT (B) 1.10

28 10L2F MECHANICAL BRAKE KNOB CLICK PLATE 2.75

29 10L6X MECHANICAL BRAKE KNOB SOUND STOP RING 2.75

30 13Y81 MECHANICAL BRAKE KNOB ASSEMBLY 36.85

31 1057X EXTRACTION STOP 1.65

32 105BP BALL BEARING (5X9X3) 13.75

33 108W8 O-RING S-16 1.65

34 10C3N FIXING BOLT 2.75

35 1005E ROLLER CLUTCH *Cannot be ordered 17.05

36 13Y82 MAIN UNIT A SET 132.00

37 10BN3 ROLLER CLUTCH INNER TUBE 6.05

38 10D55 STAR DRAG PLATE 6.05

39 10JB0 DRAG CLICK SYLLATIC RATCHET 2.75

40 10CKS STAR DRAG WASHER 6.05

41 10C0T DRAG CLICK PIN 2.75

42 10J8A DRAG CLICK SPRING 1.65

43 10J87 DRAG SPRING HOLDER 1.65

44 10RZQ DRIVE GEAR 24.75

45 10CJ4 STAR DRAG WASHER (A) 3.85

46 10R5Z STOPPER GEAR 2.75

47 13ULL DRIVE GEAR SHAFT 13.20

48 10HJF PIN FOR WORM SHAFT GEAR 1.65

49 10JDX SPRING FOR WORM SHAFT GEAR 1.65

50 10057 WORM SHAFT GEAR 2.75

51 10LVF FIXING BOLT 1.10

52 100GK DRIVE GEAR SHAFT FIXING PLATE 1.10

53 10SAM BALL BEARING (4X7X2) 13.75

54 13PKS WASHER 1.10

55 10DR5 FIXING BOLT 1.10

56 10SZ4 O-RING 1.65

57 105NC E TYPE STOP RING 2 1.10

58 10FNX WORM SHAFT GEAR 2.75

59 10N9Q WORM SHAFT HOLDER (A) 1.65

60 10T7S WORM SHAFT EXTRACTION STOP 1.10

61 13Y89 LEVEL WINDING GUIDE 3.85

62 100GT WORM SHAFT 5.50

63 13Y8A LEVEL WINDING PIPE 7.15

64 104SP WORM SHAFT HOLDER (B) 1.65

65 10G8G WASHER 1.10

66 10RZW PINION GEAR 17.05

67 13Y8B CLUTCH YOKE SPRING 1.10

68 10EE4 CLUTCH YOKE 1.10

69 101CN FIXING BOLT 1.65

70 10F42 CLUTCH CAM PUSH PLATE 3.85

71 10SKS CLUTCH CAM 2.75

72 105ZV CLUTCH CLAW 3.85

73 10N1V CLUTCH CLAW SPRING 1.65

74 13TD2 CLUTCH PLATE 2.20

75 10559 FIXING BOLT 1.65

76 13Y8C FRAME (A) BUSH 2.75

77 100BD FIXING BOLT 1.65

78 10MPS FIXING BOLT 1.65

79 13UEF BODY A SEAT 1.65

80 10TED LEVEL-WIND ASSEMBLY 51.70

81 100GC WORM SHAFT PIN EXTRACTION STOPPER 1.10

82 10908 O-RING 1.65

83 100GJ WORM SHAFT PIN 4.40

84 10GA7 WASHER 1.10

85 13Y83 FRAME ASSEMBLY 165.00

86 13TD3 CLUTCH LEVER HOLDER 1.10

87 10282 CLUTCH LEVER ASSEMBLY 7.70

88 13Y8D FRAME B CLUTCH CAM 1.10

89 10TP0 FIXING BOLT 1.10

90 13Y8E LINE GUARD 3.85

91 10E7H O RING 1.10

92 10RUC BALL BEARING (3X8X2.5) *Cannot be ordered 15.95

93 10MCZ SPOOL CLUTCH PIN *Cannot be ordered 2.75

94 13Y84 SPOOL ASSEMBLY 134.75

95 10EEA FIXING BOLT 1.10

96 10TK4 BRAKE FIXING PLATE 3.85

97 10DGJ BRAKE COIL SPRING 1.10

98 10E7E MAGNET HOLDER ASSEMBLY 29.70

99 10EEK BRAKE MOUNTING STAND 3.30

100 101A9 BEARING RETAINING CLAMP 1.10

101 1085H MECHANICAL BRAKE WASHER 1.10

102 1006P O-RING 1.65

103 13Y8F FIXING BOLT 1.65

104 13Y8G BRAKING WASHERS 1.10

105 13Y8H FIXING BOLT 1.65

106 13Y85 FRAME B RECEIVER ASSEMBLY 38.50

107 104MX BODY B CAM LEVER ADJUSTMENT WASHER 1.65

108 10T02 CAM LEVER ADJUSTMENT WASHER 2.75

109 13Y8J BODY B CAM LEVER 1.10

110 10TNF O RING 1.65

111 13Y8K BRAKE CAM 2.75

112 10CFZ O-RING 1.65

113 13Y8L BRAKE DIAL 31.35

114 13Y8M BODY B SEAL 1.10

115 13Y8N BODY B 77.00

116 13Y86 BODY B ASSEMBLY 132.00

BNKI 13YQ1 EXPLODED VIEW (ACCESSORY) 1.65

TRST 13YPY INSTRUCTION MANUAL (ACCESSORY) 1.65

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the CALCUTTA Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 23 CALCUTTA CONQUEST BFS XG RIGHT Product code: 045706**Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T14:11:22+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship this item after you order unless we have in stock at the time of your order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.94 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/5768

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "35 / ROLLER CLUTCH", "92 / BALL BEARING" and "93 /SPOOL CLUTCH PIN ", they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10DN7 FIXING BOLT 1.65

2 10RZU RETAINER 1.10

4 10SML HANDLE CAP 4.95

5 10DQN FIXING BOLT 1.65

6 104VX BALL BEARING (4X7X2.5) 13.75

7 13PK1 WASHER 1.10

8 1004X HANDLE KNOB 11.55

9 13Y7Z HANDLE SHAFT ASSEMBLY 34.10

10 13Y80 HANDLE ASSEMBLY 112.20

11 13V36 HANDLE HOLDER WASHER 1.65

12 10KXV STAR DRAG CLICK PLATE 1.65

13 10J1Y STAR DRAG CLICK PLATE 1.65

14 10B27 CLICK PIN 1.65

15 10988 CLICK SPRING 1.65

16 13Y87 STAR DRAG 22.00

17 100CU WASHER 1.10

18 10A71 STAR DRAG SPRING 2.75

20 10J1N STAR DRAG SPACER 1.65

21 10D60 MAIN GEAR WASHER (C) 1.65

22 105PW STAR DRAG BEARING WASHER 1.10

23 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

24 1027V O-RING 1.65

25 13Y88 MECHANICAL BRAKE KNOB 20.35

26 10896 MECHANICAL BRAKE WASHER 1.10

27 1057S SPOOL SHAFT CONTACT (B) 1.10

28 10L2F MECHANICAL BRAKE KNOB CLICK PLATE 2.75

29 10L6X MECHANICAL BRAKE KNOB SOUND STOP RING 2.75

30 13Y81 MECHANICAL BRAKE KNOB ASSEMBLY 36.85

31 1057X EXTRACTION STOP 1.65

32 105BP BALL BEARING (5X9X3) 13.75

33 108W8 O-RING S-16 1.65

34 10C3N FIXING BOLT 2.75

35 1005E ROLLER CLUTCH *Cannot be ordered 17.05

37 10BN3 ROLLER CLUTCH INNER TUBE 6.05

38 10D55 STAR DRAG PLATE 6.05

39 10JB0 DRAG CLICK SYRATCHET 2.75

40 10CKS STAR DRAG WASHER 6.05

41 10C0T DRAG CLICK PIN 2.75

42 10J8A DRAG CLICK SPRING 1.65

43 10J87 DRAG SPRING HOLDER 1.65

45 10CJ4 STAR DRAG WASHER (A) 3.85

46 10R5Z STOPPER GEAR 2.75

48 10HJF PIN FOR WORM SHAFT GEAR 1.65

49 10JDX SPRING FOR WORM SHAFT GEAR 1.65

50 10057 WORM SHAFT GEAR 2.75

51 10LVF FIXING BOLT 1.10

52 100GK DRIVE GEAR SHAFT FIXING PLATE 1.10

53 10SAM BALL BEARING (4X7X2) 13.75

54 13PKS WASHER 1.10

56 10SZ4 O-RING 1.65

57 105NC E TYPE STOP RING 2 1.10

58 10FNX WORM SHAFT GEAR 2.75

59 10N9Q WORM SHAFT HOLDER (A) 1.65

60 10T7S WORM SHAFT EXTRACTION STOP 1.10

61 13Y89 LEVEL WINDING GUIDE 3.85

62 100GT WORM SHAFT 5.50

63 13Y8A LEVEL WINDING PIPE 7.15

64 104SP WORM SHAFT HOLDER (B) 1.65

65 10G8G WASHER 1.10

67 13Y8B CLUTCH YOKE SPRING 1.10

69 101CN FIXING BOLT 1.65

70 10F42 CLUTCH CAM PUSH PLATE 3.85

75 10559 FIXING BOLT 1.65

76 13Y8C FRAME (A) BUSH 2.75

77 100BD FIXING BOLT 1.65

78 10MPS FIXING BOLT 1.65

80 10TED LEVEL-WIND ASSEMBLY 51.70

81 100GC WORM SHAFT PIN EXTRACTION STOPPER 1.10

82 10908 O-RING 1.65

83 100GJ WORM SHAFT PIN 4.40

84 10GA7 WASHER 1.10

89 10TP0 FIXING BOLT 1.10

90 13Y8E LINE GUARD 3.85

91 10E7H O-RING 1.10

92 10RUC BALL BEARING (3 X 8 X 2.5) *Cannot be ordered 15.95

93 10MCZ SPOOL CLUTCH PIN *Cannot be ordered 2.75

94 13Y84 SPOOL ASSEMBLY 134.75

95 10EEA FIXING BOLT 1.10

96 10TK4 BRAKE FIXING PLATE 3.85

97 10DGJ BRAKE COIL SPRING 1.10

98 10E7E MAGNET HOLDER ASSEMBLY 29.70

100 101A9 BEARING STOPPER 1.10

101 1085H MECHANICAL BRAKE WASHER 1.10

102 1006P O-RING 1.65

103 13Y8F FIXING BOLT 1.65

104 13Y8G WASHER 1.10

105 13Y8H FIXING BOLT 1.65

107 104MX BODY B CAM LEVER ADJUSTMENT WASHER 1.65

108 10T02 CAM LEVER ADJUSTMENT WASHER 2.75

110 10TNF O-RING 1.65

112 10CFZ O-RING 1.65

113 13Y8L BRAKE DIAL 31.35

301 10EE5 HANDLE FIXING NUT 4.40

302 10A0B STAR DRAG FIXING NUT 2.75

303 13Y8Q BODY A SET 132.00

304 10EDX DRIVE GEAR 24.75

305 10T7U DRIVE GEAR SHAFT 13.20

306 10DR4 FIXING BOLT 1.10

307 10EE1 PINION GEAR 17.05

308 1004W CLUTCH YOKE 1.10

309 10SX6 CLUTCH CAM 2.75

310 105ZU CLUTCH CLAW 3.85

311 10N1Z CLUTCH CLAW SPRING 1.10

312 100GE CLUTCH PLATE 2.20

313 100GD BODY A SEAT 1.65

314 13Y8R FRAME ASSEMBLY 165.00

315 100GU CLUTCH LEVER HOLDER 1.10

316 10U0N CLUTCH LEVER ASSEMBLY 7.70

317 13Y8U FRAME B RECEIVER CAM 1.10

318 10RZA BRAKE MOUNTING BASE 3.30

319 13Y8S FRAME B CAMSHAFT ASSEMBLY 38.50

320 13Y8V BODY B CAM LEVER 1.10

321 13Y8W BRAKE CAM 2.75

322 13Y8X BODY B SEAL 1.10

323 13Y8Y BODY B 77.00

324 13Y8T BODY B ASSEMBLY 132.00

*F01 13YQ0 REEL BAG (ACCESSORY) 11.00

BNKI 13YQ1 EXPLODED VIEW (ACCESSORY) 1.65

TRST 13YPY INSTRUCTION MANUAL (ACCESSORY) 1.65

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the CALCUTTA Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 23 CALCUTTA CONQUEST BFS HG LEFT Product code: 045690**Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T14:10:50+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship this item after you order unless we have in stock at the time of your order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.94 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/5768

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "35 / ROLLER CLUTCH", "92 / BALL BEARING" and "93 /SPOOL CLUTCH PIN, they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

*F01 13YQ0 REEL BAG (ACCESSORY) 11.00

1 10DN7 FIXING BOLT 1.65

2 10RZU RETAINER 1.10

3 10RZZ HANDLE FIXING NUT 4.95

4 10SML HANDLE CAP 4.95

5 10DQN FIXING BOLT 1.65

6 104VX BALL BEARING (4X7X2.5) 13.75

7 13PK1 WASHER 1.10

8 1004X HANDLE KNOB 11.55

9 13Y7Z HANDLE SHAFT ASSEMBLY 34.10

10 13Y80 HANDLE ASSEMBLY 112.20

11 13V36 HANDLE HOLDER WASHER 1.65

12 10KXV STAR DRAG CLICK PLATE 1.65

13 10J1Y STAR DRAG CLICK PLATE 1.65

14 10B27 CLICK PIN 1.65

15 10988 CLICK SPRING 1.65

16 13Y87 STAR DRAG 22.00

17 100CU WASHER 1.10

18 10A71 STAR DRAG SPRING 2.75

19 10A0C STAR DRAG FIXING NUT 2.75

20 10J1N STAR DRAG SPACER 1.65

21 10D60 MAIN GEAR WASHER (C) 1.65

22 105PW STAR DRAG BEARING WASHER 1.10

23 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

24 1027V O-RING 1.65

25 13Y88 MECHANICAL BRAKE KNOB 20.35

26 10896 MECHANICAL BRAKE WASHER 1.10

27 1057S SPOOL SHAFT CONTACT (B) 1.10

28 10L2F MECHANICAL BRAKE KNOB CLICK PLATE 2.75

29 10L6X MECHANICAL BRAKE KNOB SOUND STOP RING 2.75

30 13Y81 MECHANICAL BRAKE KNOB ASSEMBLY 36.85

31 1057X EXTRACTION STOP 1.65

32 105BP BALL BEARING (5X9X3) 13.75

33 108W8 O-RING S-16 1.65

34 10C3N FIXING BOLT 2.75

35 1005E ROLLER CLUTCH *Cannot be ordered 17.05

37 10BN3 ROLLER CLUTCH INNER TUBE 6.05

38 10D55 STAR DRAG PLATE 6.05

39 10JB0 DRAG CLICK SYRATCHET 2.75

40 10CKS STAR DRAG WASHER 6.05

41 10C0T DRAG CLICK PIN 2.75

42 10J8A DRAG CLICK SPRING 1.65

43 10J87 DRAG SPRING HOLDER 1.65

45 10CJ4 STAR DRAG WASHER (A) 3.85

46 10R5Z STOPPER GEAR 2.75

47 13ULL DRIVE GEAR SHAFT 13.20

48 10HJF WORM SHAFT GEAR PIN 1.65

49 10JDX SPRING FOR WORM SHAFT GEAR 1.65

50 10057 WORM SHAFT GEAR 2.75

51 10LVF FIXING BOLT 1.10

52 100GK DRIVE GEAR SHAFT FIXING PLATE 1.10

53 10SAM BALL BEARING (4X7X2) 13.75

54 13PKS WASHER 1.10

55 10DR5 FIXING BOLT 1.10

56 10SZ4 O-RING 1.65

57 105NC E TYPE STOP RING 2 1.10

58 10FNX WORM SHAFT GEAR 2.75

59 10N9Q WORM SHAFT HOLDER (A) 1.65

60 10T7S WORM SHAFT EXTRACTION STOP 1.10

61 13Y89 LEVEL WINDING GUIDE 3.85

62 100GT WORM SHAFT 5.50

63 13Y8A LEVEL WINDING PIPE 7.15

64 104SP WORM SHAFT HOLDER (B) 1.65

65 10G8G WASHER 1.10

67 13Y8B CLUTCH YOKE SPRING 1.10

68 10EE4 CLUTCH YOKE 1.10

69 101CN FIXING BOLT 1.65

70 10F42 CLUTCH CAM PUSH PLATE 3.85

71 10SKS CLUTCH CAM 2.75

72 105ZV CLUTCH CLAW 3.85

73 10N1V CLUTCH CLAW SPRING 1.65

74 13TD2 CLUTCH PLATE 2.20

75 10559 FIXING BOLT 1.65

76 13Y8C FRAME (A) BUSH 2.75

77 100BD FIXING BOLT 1.65

78 10MPS FIXING BOLT 1.65

79 13UEF BODY A SEAT 1.65

80 10TED LEVEL-WIND ASSEMBLY 51.70

81 100GC WORM SHAFT PIN EXTRACTION STOPPER 1.10

82 10908 O-RING 1.65

83 100GJ WORM SHAFT PIN 4.40

84 10GA7 WASHER 1.10

85 13Y83 FRAME ASSEMBLY 165.00

86 13TD3 CLUTCH LEVER HOLDER 1.10

87 10282 CLUTCH LEVER ASSEMBLY 7.70

88 13Y8D FRAME B CLUTCH CAM 1.10

89 10TP0 FIXING BOLT 1.10

90 13Y8E LINE GUARD 3.85

91 10E7H O RING 1.10

92 10RUC BALL BEARING (3X8X2.5) *Cannot be ordered 15.95

93 10MCZ SPOOL CLUTCH PIN *Cannot be ordered 2.75

94 13Y84 SPOOL ASSEMBLY 134.75

95 10EEA FIXING BOLT 1.10

96 10TK4 BRAKE FIXING PLATE 3.85

97 10DGJ BRAKE COIL SPRING 1.10

98 10E7E MAGNET HOLDER ASSEMBLY 29.70

99 10EEK BRAKE MOUNTING STAND 3.30

100 101A9 BEARING RETAINING CLAMP 1.10

101 1085H MECHANICAL BRAKE WASHER 1.10

102 1006P O-RING 1.65

103 13Y8F FIXING BOLT 1.65

104 13Y8G BRAKING WASHERS 1.10

105 13Y8H FIXING BOLT 1.65

106 13Y85 FRAME B RECEIVER ASSEMBLY 38.50

107 104MX BODY B CAM LEVER ADJUSTMENT WASHER 1.65

108 10T02 CAM LEVER ADJUSTMENT WASHER 2.75

109 13Y8J BODY B CAM LEVER 1.10

110 10TNF O RING 1.65

111 13Y8K BRAKE CAM 2.75

112 10CFZ O-RING 1.65

113 13Y8L BRAKE DIAL 31.35

114 13Y8M BODY B SEAL 1.10

115 13Y8N BODY B 77.00

116 13Y86 BODY B ASSEMBLY 132.00

201 13Y8P BODY A SET 132.00

202 10EEE DRIVE GEAR 24.75

203 10RZC PINION GEAR 17.05

BNKI 13YQ1 EXPLODED VIEW (ACCESSORIES) 1.65

TRST 13YPY INSTRUCTION MANUAL (ACCESSORY) 1.65

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the CALCUTTA Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 23 CALCUTTA CONQUEST BFS HG RIGHT Product code: 045683 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T14:10:18+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship this item after you order unless we have in stock at the time of your order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.94 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/5768

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "35 / ROLLER CLUTCH", "92 / BALL BEARING" and "93 /SPOOL CLUTCH PIN, they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10DN7 FIXING BOLT 1.65

2 10RZU RETAINER 1.10

4 10SML HANDLE CAP 4.95

5 10DQN FIXING BOLT 1.65

6 104VX BALL BEARING (4X7X2.5) 13.75

7 13PK1 WASHER 1.10

8 1004X HANDLE KNOB 11.55

9 13Y7Z HANDLE SHAFT ASSEMBLY 34.10

10 13Y80 HANDLE ASSEMBLY 112.20

11 13V36 HANDLE HOLDER WASHER 1.65

12 10KXV STAR DRAG CLICK PLATE 1.65

13 10J1Y STAR DRAG CLICK PLATE 1.65

14 10B27 CLICK PIN 1.65

15 10988 CLICK SPRING 1.65

16 13Y87 STAR DRAG 22.00

17 100CU WASHER 1.10

18 10A71 STAR DRAG SPRING 2.75

20 10J1N STAR DRAG SPACER 1.65

21 10D60 MAIN GEAR WASHER (C) 1.65

22 105PW STAR DRAG BEARING WASHER 1.10

23 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

24 1027V O-RING 1.65

25 13Y88 MECHANICAL BRAKE KNOB 20.35

26 10896 MECHANICAL BRAKE WASHER 1.10

27 1057S SPOOL SHAFT CONTACT (B) 1.10

28 10L2F MECHANICAL BRAKE KNOB CLICK PLATE 2.75

29 10L6X MECHANICAL BRAKE KNOB SOUND STOP RING 2.75

30 13Y81 MECHANICAL BRAKE KNOB ASSEMBLY 36.85

31 1057X EXTRACTION STOP 1.65

32 105BP BALL BEARING (5X9X3) 13.75

33 108W8 O-RING S-16 1.65

34 10C3N FIXING BOLT 2.75

35 1005E ROLLER CLUTCH *Cannot be ordered 17.05

37 10BN3 ROLLER CLUTCH INNER TUBE 6.05

38 10D55 STAR DRAG PLATE 6.05

39 10JB0 DRAG CLICK SYRATCHET 2.75

40 10CKS STAR DRAG WASHER 6.05

41 10C0T DRAG CLICK PIN 2.75

42 10J8A DRAG CLICK SPRING 1.65

43 10J87 DRAG SPRING HOLDER 1.65

45 10CJ4 STAR DRAG WASHER (A) 3.85

46 10R5Z STOPPER GEAR 2.75

48 10HJF PIN FOR WORM SHAFT GEAR 1.65

49 10JDX SPRING FOR WORM SHAFT GEAR 1.65

50 10057 WORM SHAFT GEAR 2.75

51 10LVF FIXING BOLT 1.10

52 100GK DRIVE GEAR SHAFT FIXING PLATE 1.10

53 10SAM BALL BEARING (4X7X2) 13.75

54 13PKS WASHER 1.10

56 10SZ4 O-RING 1.65

57 105NC E TYPE STOP RING 2 1.10

58 10FNX WORM SHAFT GEAR 2.75

59 10N9Q WORM SHAFT HOLDER (A) 1.65

60 10T7S WORM SHAFT EXTRACTION STOP 1.10

61 13Y89 LEVEL WINDING GUIDE 3.85

62 100GT WORM SHAFT 5.50

63 13Y8A LEVEL WINDING PIPE 7.15

64 104SP WORM SHAFT HOLDER (B) 1.65

65 10G8G WASHER 1.10

67 13Y8B CLUTCH YOKE SPRING 1.10

69 101CN FIXING BOLT 1.65

70 10F42 CLUTCH CAM PUSH PLATE 3.85

75 10559 FIXING BOLT 1.65

76 13Y8C FRAME (A) BUSH 2.75

77 100BD FIXING BOLT 1.65

78 10MPS FIXING BOLT 1.65

80 10TED LEVEL-WIND ASSEMBLY 51.70

81 100GC WORM SHAFT PIN EXTRACTION STOPPER 1.10

82 10908 O-RING 1.65

83 100GJ WORM SHAFT PIN 4.40

84 10GA7 WASHER 1.10

89 10TP0 FIXING BOLT 1.10

90 13Y8E LINE GUARD 3.85

91 10E7H O-RING 1.10

92 10RUC BALL BEARING (3 X 8 X 2.5) *Cannot be ordered 15.95

93 10MCZ SPOOL CLUTCH PIN *Cannot be ordered 2.75

94 13Y84 SPOOL ASSEMBLY 134.75

95 10EEA FIXING BOLT 1.10

96 10TK4 BRAKE FIXING PLATE 3.85

97 10DGJ BRAKE COIL SPRING 1.10

98 10E7E MAGNET HOLDER ASSEMBLY 29.70

100 101A9 BEARING STOPPER 1.10

101 1085H MECHANICAL BRAKE WASHER 1.10

102 1006P O-RING 1.65

103 13Y8F FIXING BOLT 1.65

104 13Y8G WASHER 1.10

105 13Y8H FIXING BOLT 1.65

107 104MX BODY B CAM LEVER ADJUSTMENT WASHER 1.65

108 10T02 CAM LEVER ADJUSTMENT WASHER 2.75

110 10TNF O-RING 1.65

112 10CFZ O-RING 1.65

113 13Y8L BRAKE DIAL 31.35

301 10EE5 HANDLE FIXING NUT 4.40

302 10A0B STAR DRAG FIXING NUT 2.75

305 10T7U DRIVE GEAR SHAFT 13.20

306 10DR4 FIXING BOLT 1.10

308 1004W CLUTCH YOKE 1.10

309 10SX6 CLUTCH CAM 2.75

310 105ZU CLUTCH CLAW 3.85

311 10N1Z CLUTCH CLAW SPRING 1.10

312 100GE CLUTCH PLATE 2.20

313 100GD BODY A SEAT 1.65

314 13Y8R FRAME ASSEMBLY 165.00

315 100GU CLUTCH LEVER HOLDER 1.10

316 10U0N CLUTCH LEVER ASSEMBLY 7.70

317 13Y8U FRAME B RECEIVER CAM 1.10

318 10RZA BRAKE MOUNTING BASE 3.30

319 13Y8S FRAME B CAMSHAFT ASSEMBLY 38.50

320 13Y8V BODY B CAM LEVER 1.10

321 13Y8W BRAKE CAM 2.75

322 13Y8X BODY B SEAL 1.10

323 13Y8Y BODY B 77.00

324 13Y8T BODY B ASSEMBLY 132.00

401 13Y8Z BODY A ASSEMBLY 132.00

402 10RZE DRIVE GEAR 24.75

403 10RZS PINION GEAR 17.05

*F01 13YQ0 REEL BAG (ACCESSORY) 11.00

BNKI 13YQ1 EXPLODED VIEW (ACCESSORY) 1.65

TRST 13YPY INSTRUCTION MANUAL (ACCESSORY) 1.65

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the CALCUTTA Series Are Available Here!

[SHIMANO Genuine] 23-26 CALCUTTA CONQUEST BFS Spare Spool

HEDGEHOG STUDIO — 2026-08-20T14:09:39+09:00

Product Description

This is SHIMANO genuine spool equipped on 23 CALCUTTA CONQUEST BFS, 26 CALCUTTA CONQUEST BFS LIMITED series.

You may use as an extra spool with different line strength.

Spec

Line Capacity Fuloro (lb-m)
6-45, 8-45

Compatibility

- 23 CALCUTTA CONQUEST BFS
( HG RIGHT, HG LEFT, XG RIGHT, XG LEFT )

- 26 CALCUTTA CONQUEST BFS LIMITED
( HG RIGHT, HG LEFT, XG RIGHT, XG LEFT )

| Wide Selection Available! Click Here For Fishing Lines And Accessories.

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the CALCUTTA Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 24 CALCUTTA CONQUEST SHALLOW EDITION 31HG LEFT Product code: 046741 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T14:07:58+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "34 / ROLLER CLUTCH", "90 / BALL BEARING", "93 /SPOOL CLUTCH PIN", "BRKS / BRAKE SHOE S" and "BST1 / BRAKE SHAFT", they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10CZ5 FIXING BOLT 2.75

3 10T7R RETAINER 1.10

4 145V6 HANDLE CAP 8.80

5 103E9 FIXING BOLT 1.10

6 104VX BALL BEARING (4X7X2.5) 13.75

7 104FH WASHER 2.20

9 145UC HANDLE SHAFT ASSEMBLY 44.00

11 10KXV STAR DRAG CLICK PLATE RETAINER 1.65

12 10J1Y STAR DRAG CLICK PLATE 1.65

13 10B27 CLICK PIN 1.65

14 10988 CLICK SPRING 1.65

15 145V5 STAR DRAG 22.00

16 100CU WASHER 1.10

17 10A71 STAR DRAG SPRING 2.75

19 10J1N STAR DRAG SPACER 1.65

20 10D60 MAIN GEAR WASHER (C) 1.65

21 105PW STAR DRAG BEARING WASHER 1.10

22 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

23 1027V O-RING 1.65

24 145V4 MECHANICAL BRAKE KNOB 20.35

25 10896 MECHANICAL BRAKE WASHER 1.10

26 1057S SPOOL SHAFT CONTACT (B) 1.10

27 10L2F MECHANICAL BRAKE KNOB CLICK PLATE 2.75

28 10L6X MECHANICAL BRAKE KNOB CLICK STOP RING 2.75

29 145UE MECHANICAL BRAKE KNOB ASSEMBLY 36.85

30 1057X EXTRACTION STOP 1.65

31 105BP BALL BEARING (5 X 9 X 3) 13.75

32 108W8 O-RING S-16 1.65

33 10C3N FIXING BOLT 2.75

34 1005E ROLLER CLUTCH *Cannot be ordered 17.05

36 10BN3 ROLLER CLUTCH INNER TUBE 6.05

37 10SNJ STAR DRAG PLATE 7.15

38 10E9B DRAG CLICK SYRATCHET 3.85

39 1027W STAR DRAG WASHER 9.35

40 10C0T DRAG CLICK PIN 2.75

41 10J8A DRAG SPRING HOLDER 1.65

42 10J87 DRAG SPRING HOLDER 1.65

44 10CHZ STAR DRAG WASHER 2.75

45 10RLS STOPPER GEAR 3.85

47 10JDX WORM SHAFT GEAR SPRING 1.65

48 10HJF WORM SHAFT GEAR PINS 1.65

49 10057 WORM SHAFT GEAR 2.75

50 10LVF FIXING BOLT 1.10

51 100GK DRIVE GEAR SHAFT FIXING PLATE 1.10

52 10SAM BALL BEARING (4X7X2) 13.75

53 13PKS WASHER 1.10

55 10SZ4 O-RING 1.65

56 105NC E TYPE STOP RING 2 1.10

57 10FNX WORM SHAFT GEAR 2.75

58 10G8F WORM SHAFT GEAR 1.10

59 10N9Q WORM SHAFT HOLDER (A) 1.65

60 10T7S WORM SHAFT EXTRACTION STOP 1.10

61 13Y89 LEVEL WINDING GUIDE 3.85

62 100GT WORM SHAFT 5.50

63 145V3 LEVEL WINDING PIPE 7.70

64 104SP WORM SHAFT HOLDER (B) 1.65

66 104BU CLUTCH YOKE SPRING 1.10

68 101CN FIXING BOLT 1.65

69 10F42 CLUTCH CAM PUSH PLATE 3.85

74 10559 FIXING BOLT 1.65

75 100BD FIXING BOLT 1.65

76 10MPS FIXING BOLT 1.65

78 10TED LEVEL WINDING ASSEMBLY 51.70

79 100GC WORM SHAFT PIN STOPPER 1.10

80 10908 O-RING 1.65

81 100GJ WORM SHAFT PIN 4.40

82 105NB E TYPE RETAINING RING 1.5 1.10

83 10GA7 WASHER 1.10

88 10LVP FIXING BOLT 2.75

89 10TNF O-RING 1.65

90 1005D BALL BEARING (5X11X4) *Cannot be ordered 13.75

91 10SWZ BUSH 1.65

92 10SJF BEARING PUSH SPRING 1.65

93 10MD0 SPOOL CLUTCH PIN *Cannot be ordered 1.65

94 10EZ7 O-RING 1.10

95 145UH SPOOL ASSEMBLY 121.00

96 10GEW BEARING PULL-OUT STOPPER 1.10

97 10LA8 O-RING 1.65

98 10S37 BALL BEARING (3 X 10 X 4) 13.75

99 100N4 BRAKE PIPE GEAR ASSEMBLY 13.75

100 10PRT FIXING BOLT 1.10

101 10BGM BR KNOB GEAR 1.65

103 1006P O-RING 1.65

104 10T02 WASHER 2.75

106 10RLZ BODY B SHAFT GUIDE 1.65

107 10T7F DAMPER SPRING 1.10

108 10FMT O-RING 1.10

109 143LB WASHER 1.10

110 145UJ BRAKE DIAL ASSEMBLY 31.35

113 10G8G WASHER 1.10

114 145UU WASHER 1.10

201 145V7 HANDLE FIXING NUT 11.00

202 13MB9 HANDLE KNOB 11.55

203 145UL HANDLE ASSEMBLY 101.20

204 10A0C STAR DRAG FIXING NUT 2.75

205 145UM BODY A SET 132.00

206 13UWW DRIVE GEAR 28.05

207 13ULL DRIVE GEAR SHAFT 13.20

208 10DR5 FIXING BOLT 1.10

209 13SPG PINION GEAR 22.00

210 1046U CLUTCH YOKE 1.65

211 10SKS CLUTCH CAM 2.75

212 105ZV CLUTCH CLAW 3.85

213 10N1V CLUTCH CLAW SPRING 1.65

214 13TD2 CLUTCH PLATE 2.20

215 13UEF BODY A SEAT 1.65

216 145UN FRAME ASSEMBLY 165.00

217 13TD3 CLUTCH LEVER HOLDER 1.10

218 10282 CLUTCH LEVER ASSEMBLY 7.70

219 13S0Q FRAME B CLUTCH CAM 1.10

220 13FZC FRAME B CAMS 33.00

221 13RNF BODY B CAM LEVER 1.10

222 13RGN BODY B SEAL 1.10

223 145UP BODY B 77.00

*F01 13WNH REEL BAG (ACCESSORY) 11.00

BRKS 10RC4 BRAKE SHOE S *Cannot be ordered 1.10

BST1 13SFU BRAKE SHAFT *Cannot be ordered 1.10

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the CALCUTTA Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 24 CALCUTTA CONQUEST SHALLOW EDITION 30HG RIGHT Product code: 046734 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T14:07:25+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "34 / ROLLER CLUTCH", "90 / BALL BEARING" and "93 /SPOOL CLUTCH PIN, they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10CZ5 FIXING BOLT 2.75

2 145V8 HANDLE FIXING NUT 11.00

3 10T7R RETAINER 1.10

4 145V6 HANDLE CAP 8.80

5 103E9 FIXING BOLT 1.10

6 104VX BALL BEARING (4×7×2.5) 13.75

7 104FH WASHER 2.20

8 10E9X HANDLE KNOB 11.55

9 145UC HANDLE SHAFT ASSEMBLY 44.00

10 145UD HANDLE ASSEMBLY 101.20

11 10KXV STAR DRAG SOUNDING PLATE 1.65

12 10J1Y STAR DRAG SOUNDING PLATE 1.65

13 10B27 CLICK PIN 1.65

14 10988 CLICK SPRING 1.65

15 145V5 STAR DRAG 22.00

16 100CU WASHER 1.10

17 10A71 STAR DRAG SPRING 2.75

18 10A0B STAR DRAG FIXING NUT 2.75

19 10J1N STAR DRAG SPACER 1.65

20 10D60 MAIN GEAR WASHER (C) 1.65

21 105PW STAR DRAG BEARING WASHER 1.10

22 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

23 1027V O-RING 1.65

24 145V4 MECHANICAL BRAKE KNOB 20.35

25 10896 MECHANICAL BRAKE WASHER 1.10

26 1057S SPOOL SHAFT CONTACT (B) 1.10

27 10L2F MECHANICAL BRAKE KNOB SOUNDING PLATE 2.75

28 10L6X MECHANICAL BRAKE KNOB SOUND STOP RING 2.75

29 145UE MECHANICAL BRAKE KNOB ASSEMBLY 36.85

30 1057X EXTRACTION STOP 1.65

31 105BP BALL BEARING (5×9×3) 13.75

32 108W8 O-RING S-16 1.65

33 10C3N FIXING BOLT 2.75

34 1005E ROLLER CLUTCH *Cannot be ordered 17.05

35 145UF MAIN UNIT A SET 132.00

36 10BN3 ROLLER CLUTCH INNER TUBE 6.05

37 10SNJ STAR DRAG PLATE 7.15

38 10E9B DRAG SOUNDING SYLLATIC RATCHET 3.85

39 1027W STAR DRAG WASHER 9.35

40 10C0T DRAG CLICK PIN 2.75

41 10J8A DRAG CLICK SPRING 1.65

42 10J87 DRAG SPRING HOLDER 1.65

43 10RLW DRIVE GEAR 28.05

44 10CHZ STAR DRAG WASHER 2.75

45 10RLS STOPPER GEAR 3.85

46 10T7U DRIVE GEAR SHAFT 13.20

47 10JDX WORM SHAFT GEAR SPRING 1.65

48 10HJF WORM SHAFT GEAR PINS 1.65

49 10057 WORM SHAFT GEAR 2.75

50 10LVF FIXING BOLT 1.10

51 100GK DRIVE GEAR SHAFT FIXING PLATE 1.10

52 10SAM BALL BEARING (4×7×2) 13.75

53 13PKS WASHER 1.10

54 10DR4 FIXING BOLT 1.10

55 10SZ4 O-RING 1.65

56 105NC E TYPE STOP RING 2 1.10

57 10FNX WORM SHAFT GEAR 2.75

58 10G8F WORM SHAFT GEAR 1.10

59 10N9Q WORM SHAFT HOLDER (A) 1.65

60 10T7S WORM SHAFT EXTRACTION STOP 1.10

61 13Y89 LEVEL WINDING GUIDE 3.85

62 100GT WORM SHAFT 5.50

63 145V3 LEVEL WINDING PIPE 7.70

64 104SP WORM SHAFT HOLDER (B) 1.65

65 100HY PINION GEAR 22.00

66 104BU CLUTCH YOKE SPRING 1.10

67 1046T CLUTCH YOKE 1.65

68 101CN FIXING BOLT 1.65

69 10F42 CLUTCH CAM PUSH PLATE 3.85

70 10SX6 CLUTCH CAM 2.75

71 105ZU CLUTCH CLAW 3.85

72 10N1Z CLUTCH CLAW SPRING 1.10

73 100GE CLUTCH PLATE 2.20

74 10559 FIXING BOLT 1.65

75 100BD FIXING BOLT 1.65

76 10MPS FIXING BOLT 1.65

77 100GD BODY A SEAT 1.65

78 10TED LEVEL WINDING ASSEMBLY 51.70

79 100GC WORM SHAFT PIN EXTRACTION STOPPER 1.10

80 10908 O-RING 1.65

81 100GJ WORM SHAFT PIN 4.40

82 105NB E TYPE RETAINING RING 1.5 1.10

83 10GA7 WASHER 1.10

84 145UG FRAME ASSEMBLY 165.00

85 100GU CLUTCH LEVER HOLDER 1.10

86 10U0N CLUTCH LEVER ASSEMBLY 7.70

87 100GH FRAME B CLUTCH CAM 1.10

88 10LVP FIXING BOLT 2.75

89 10TNF O RING 1.65

90 1005D BALL BEARING (5 X 11 X 4) *Cannot be ordered 13.75

91 10SWZ BUSH 1.65

92 10SJF BEARING PUSH SPRING 1.65

93 10MD0 SPOOL CLUTCH PIN *Cannot be ordered 1.65

94 10EZ7 O-RING 1.10

95 145UH SPOOL ASSEMBLY 121.00

96 10GEW BEARING PULL-OUT STOPPER 1.10

97 10LA8 O-RING 1.65

98 10S37 BALL BEARING (3 X 10 X 4) 13.75

99 100N4 BRAKE PIPE GEAR ASSEMBLY 13.75

100 10PRT FIXING BOLT 1.10

101 10BGM BR KNOB GEAR 1.65

102 100TP FRAME B RECEIVER ASSEMBLY 33.00

103 1006P O-RING 1.65

104 10T02 O-RING 2.75

105 100GV BODY B CAM LEVER 1.10

106 10RLZ BODY B SHAFT GUIDE 1.65

107 10T7F DAMPER SPRING 1.10

108 10FMT O-RING 1.10

109 143LB WASHER 1.10

110 145UJ BRAKE DIAL ASSEMBLY 31.35

111 10T7P BODY B SEAL 1.10

112 145UK BODY B 77.00

113 10G8G WASHER 1.10

114 145UU REEL WASHER 1.10

*F01 13WNH REEL BAG (ACCESSORY) 11.00

BNKI 14558 EXPLODED VIEW (ACCESSORY) 1.10

TRST 14557 INSTRUCTION MANUAL (ACCESSORY) 1.10

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the CALCUTTA Series Are Available Here!

[SHIMANO] Overhaul Bearing for 24 CALCUTTA CONQUEST SHALLOW EDITION (sold separately)

HEDGEHOG STUDIO — 2026-08-20T14:06:43+09:00

Click on the part numbers below to see the reel schematic of the 24 CALCUTTA CONQUEST SHALLOW EDITION:

30HG RIGHT / 31HG LEFT

All bearings are sold separately for those who wish to overhaul the reels by themselves.

Overhauling is a difficult maintenance work for intermediate level users and above.
For first-time tuners, we recommend starting with a simple Bearing Upgrade Kit.

Click on the bearing part number below to enter the individual bearing sales page and purchase the bearing from the link.

Compatibility chart of all bearings inside the reel

- SHG: HEDGEHOG STUDIO Premium Bearing
- HRCB: HEDGEHOG STUDIO Anti-rust bearing
- S A-RB: SHIMANO Genuine Anti-rust Bearing
- CRBB: DAIWA Genuine Anti-rust Bearing

24 CALCUTTA CONQUEST SHALLOW EDITION (30HG RIGHT, 31HG LEFT)

- 0006 104VX BALL BEARING (Inner diameter 4mm × Outer diameter 7mm × Thickness 2.5mm)
SHG-740ZZ or HRCB-740ZHi

- 0022 10EX8 BALL BEARING (Inner diameter 8mm × Outer diameter 12mm × Thickness 3.5mm)
SHG-1280ZZ or HRCB-1280ZHi

- 0031 105BP BALL BEARING (Inner diameter 5mm × Outer diameter 9mm × Thickness 3mm)
SHG-950ZZ or HRCB-950ZHi

- 0052 10SAM BALL BEARING (Inner diameter 4mm × Outer diameter 7mm × Thickness 2mm)
SHG-740 or HRCB-740Hi

- 0090 1005D BALL BEARING (Inner diameter 5mm × Outer diameter 11mm × Thickness 4mm)
HS-1150AIR HD or HS-1150AIR or HS-1150AIR BFS or SHG-1150ZR or HRCB-1150ZHi or SHG-1150ZZ

- 0098 10S37 BALL BEARING (Inner diameter 3mm × Outer diameter 10mm × Thickness 4mm)
HS-1030AIR HD or HS-1030AIR or HS-1030AIR BFS SW or HS-1030AIR BFS or SHG-1030ZR or HRCB-1030ZHi

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the CALCUTTA Series Are Available Here!

[SHIMANO Genuine] 21 CALCUTTA CONQUEST 100 series Spare Spool (100, 101, 100HG, 101HG) Product code: 042323 / No.94 / S Part No. 100TJ / SPOOL ASSEMBLY (WITH BEARING)

HEDGEHOG STUDIO — 2026-08-20T14:06:07+09:00

| ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship this item after you order unless we have in stock at the time of your order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

| Product Description

This is SHIMANO original (genuine) spool equipped on 21 CALCUTTA CONQUEST 100/101.
You may use as an extra spool with different line strength.

| Spec

Nylon Line Capacity (lb-m)
12 lb: 100 m / 14 lb: 90 m / 16 lb: 80 m / 20 lb: 65 m

| Compatibility

- 21 CALCUTTA CONQUEST 100
( 100, 101, 100HG, 101HG )

- 24 CALCUTTA CONQUEST SHALLOW EDITION
( 30HG, 31HG )

- 21 CALCUTTA CONQUEST 100 series

Model Product Code S Part No. Part No./Part Name

100 042323 100TJ 0094 SPOOL ASSEMBLY (WITH BEARING)

101 042330 100TJ 0094 SPOOL ASSEMBLY (WITH BEARING)

100HG 042361 100TJ 0094 SPOOL ASSEMBLY (WITH BEARING)

101HG 042378 100TJ 0094 SPOOL ASSEMBLY (WITH BEARING)

| Wide Selection Available! Click Here For Fishing Lines And Accessories.

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the CALCUTTA Series Are Available Here!

[SHIMANO Genuine] 24 CALCUTTA CONQUEST SHALLOW EDITION Spare Spool

HEDGEHOG STUDIO — 2026-08-20T14:05:34+09:00

Product Description

This is SHIMANO genuine spool equipped on 24 CALCUTTA CONQUEST SHALLOW EDITION series.

You may use as an extra spool with different line strength.

Spec

Nylon (lb-m)
8-100, 10-90, 12-65

Compatible Models

- 24 CALCUTTA CONQUEST SHALLOW EDITON
( 30HG, 31HG )

- 21 CALCUTTA CONQUEST 100
( 100, 101, 100HG, 101HG )

Wide Selection Available! Click here for fishing lines and accessories.

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the CALCUTTA Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 26 CALCUTTA CONQUEST BFS LIMITED XG LEFT Product code: 049353 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T14:03:37+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "35 / ROLLER CLUTCH", "93 /SPOOL CLUTCH PIN" and "92 /BALL BEARING", they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10DN7 FIXING BOLT 1.65

2 10RZU RETAINER 1.10

3 14AEE HANDLE FIXING NUT 4.95

4 14AE8 HANDLE CAP 11.55

5 10DQN FIXING BOLT 1.65

6 104VX BALL BEARING (4X7X2.5) 13.75

7 104FH WASHER 2.20

8 14AE7 HANDLE KNOB 88.00

9 14CNJ HANDLE SHANK ASSEMBLY 34.10

10 14CNK HANDLE ASSEMBLY 203.50

11 13V36 HANDLE BEARING SEAT WASHER 1.65

12 10KXV STAR DRAG CLICK PLATE RETAINER 1.65

13 10J1Y STAR DRAG CLICK PLATE 1.65

14 10B27 CLICK PIN 1.65

15 10988 CLICK SPRING 1.65

16 14AEC STAR DRAG 22.00

17 100CU WASHER 1.10

18 10A71 STAR DRAG SPRING 2.75

19 10A0C STAR DRAG LOCK NUT 2.75

20 10J1N STAR DRAG SPACER 1.65

21 10D60 MAIN GEAR WASHER (C) 1.65

22 105PW STAR DRAG BEARING WASHER 1.10

23 10EX8 BALL BEARING (8X12X3.5) 13.75

24 1027V O-RING 1.65

25 14AEB MECHANICAL BRAKE KNOB 20.35

26 10896 MECHANICAL BRAKE WASHER 1.10

27 1057S SPOOL SHAFT STOPPER (B) 1.10

28 10L2F MECHANICAL BRAKE KNOB CLICK PLATE 2.75

29 10L6X MECHANICAL BRAKE KNOB CLICK HOLDER 2.75

30 14CNL MECHANICAL BRAKE KNOB ASSEMBLY 36.85

31 1057X RETAINER 1.65

32 105BP BALL BEARING (5X9X3) 13.75

33 108W8 O-RING S-16 1.65

34 10C3N FIXING BOLT 2.75

35 1005E ROLLER CLUTCH *Cannot be ordered 17.05

36 14CNM MAIN BODY A ASSEMBLY 132.00

37 10BN3 ROLLER CLUTCH INNER TUBE 6.05

38 10D55 STAR DRAG PLATE 6.05

39 10JB0 DRAG CLICK RATCHET 2.75

40 10CKS STAR DRAG WASHER 6.05

41 10C0T DRAG CLICK PIN 2.75

42 10J8A DRAG CLICK SPRING 1.65

43 10J87 DRAG SPRING HOLDER 1.65

44 10RZQ DRIVE GEAR 29.70

45 10CJ4 STAR DRAG WASHER (A) 3.85

46 10R5Z STOPPER GEAR 2.75

47 13ULL DRIVE GEAR SHAFT 13.20

48 10JDX WORM SHAFT GEAR SPRING 1.65

49 10HJF WORM SHAFT GEAR PIN 1.65

50 10057 WORM SHAFT GEAR 2.75

51 10U0S FIXING BOLT 1.10

52 100GK DRIVE GEAR SHAFT FIXING PLATE 1.10

53 10SAM BALL BEARING (4X7X2) 13.75

54 13PKS WASHER 1.10

55 10DR5 FIXING BOLT 1.10

56 10SZ4 O-RING 1.65

57 105NC E-TYPE RETAINING RING 2 1.10

58 10FNX WORM SHAFT GEAR 2.75

59 10N9Q WORM SHAFT BEARING (A) 1.65

60 10T7S WORM SHAFT RETAINER 1.10

61 1485R LEVEL WIND GUIDE 3.30

62 100GT WORM SHAFT 5.50

63 1485Q LEVEL WIND PIPE 7.15

64 104SP WORM SHAFT BEARING (B) 1.65

65 10G8G WASHER 1.10

66 10RZW PINION GEAR 23.10

67 13Y8B CLUTCH YOKE SPRING 1.10

68 10EE4 CLUTCH YOKE 1.10

69 101CN FIXING BOLT 1.65

70 10F42 CLUTCH CAM RETAINING PLATE 3.85

71 10SKS CLUTCH CAM 2.75

72 105ZV CLUTCH CLAW 3.85

73 14026 CLUTCH CLAW SPRING 1.65

74 13TD2 CLUTCH PLATE 2.20

75 10559 FIXING BOLT 1.65

76 13Y8C FRAME (A) BUSHING 2.75

77 100BD FIXING BOLT 1.65

78 10MPS FIXING BOLT 1.65

79 13UEF MAIN BODY A SHEET 1.65

80 10TED LEVEL WIND ASSEMBLY 51.70

81 100GC WORM SHAFT PIN RETAINER 1.10

82 10908 O-RING 1.65

83 100GJ WORM SHAFT PIN 4.40

84 10GA7 WASHER 1.10

85 14CNN FRAME ASSEMBLY 165.00

86 13TD3 CLUTCH LEVER MOUNT 1.10

87 10282 CLUTCH LEVER ASSEMBLY 7.70

88 13Y8D FRAME B MOUNT CAM 1.10

89 10TP0 FIXING BOLT 1.10

90 13Y8E LINE GUARD 3.85

91 10E7H O-RING 1.10

92 10RUC BALL BEARING (3X8X2.5) *Cannot be ordered 15.95

93 10MCZ SPOOL CLUTCH PIN *Cannot be ordered 2.75

94 13Y84 SPOOL ASSEMBLY 134.75

95 10EEA FIXING BOLT 1.10

96 10TK4 BRAKE FIXING PLATE 3.85

97 10DGJ BRAKE COIL SPRING 1.10

98 10E7E MAGNET HOLDER ASSEMBLY 29.70

99 10EEK BRAKE MOUNTING BASE 3.30

100 101A9 BEARING RETAINER 1.10

101 1085H MECHANICAL BRAKE WASHER 1.10

102 1006P O-RING 1.65

103 13Y8F FIXING BOLT 1.65

104 13Y8G WASHER 1.10

105 13Y8H FIXING BOLT 1.65

106 13Y85 FRAME B MOUNT ASSEMBLY 38.50

107 145UU WASHER 1.10

108 10T02 WASHER 2.75

109 13Y8J MAIN BODY B CAM LEVER 1.10

110 10TNF O-RING 1.65

111 13Y8K BRAKE CAM 2.75

112 10CFZ O-RING 1.65

113 14AE2 BRAKE DIAL 31.35

114 13Y8M MAIN BODY B SEAL 1.10

115 14AE1 MAIN BODY B 77.00

116 14CNP MAIN BODY B ASSEMBLY 132.00

*F01 14B04 REEL BAG 11.00

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the CALCUTTA Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 26 CALCUTTA CONQUEST BFS LIMITED XG RIGHT Product code: 049346 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T14:03:06+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "35 / ROLLER CLUTCH", "93 /SPOOL CLUTCH PIN" and "92 /BALL BEARING", they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10DN7 FIXING BOLT 1.65

2 10RZU RETAINER 1.10

4 14AE8 HANDLE CAP 11.55

5 10DQN FIXING BOLT 1.65

6 104VX BALL BEARING (4X7X2.5) 13.75

7 104FH WASHER 2.20

8 14AE7 HANDLE KNOB 88.00

9 14CNJ HANDLE SHANK ASSEMBLY 34.10

10 14CNK HANDLE ASSEMBLY 203.50

11 13V36 HANDLE BEARING WASHER 1.65

12 10KXV STAR DRAG CLICK PLATE RETAINER 1.65

13 10J1Y STAR DRAG CLICK PLATE 1.65

14 10B27 CLICK PIN 1.65

15 10988 CLICK SPRING 1.65

16 14AEC STAR DRAG 22.00

17 100CU WASHER 1.10

18 10A71 STAR DRAG SPRING 2.75

20 10J1N STAR DRAG SPACER 1.65

21 10D60 MAIN GEAR WASHER (C) 1.65

22 105PW STAR DRAG BEARING WASHER 1.10

23 10EX8 BALL BEARING (8X12X3.5) 13.75

24 1027V O-RING 1.65

25 14AEB MECHANICAL BRAKE KNOB 20.35

26 10896 MECHANICAL BRAKE WASHER 1.10

27 1057S SPOOL SHAFT STOPPER (B) 1.10

28 10L2F MECHANICAL BRAKE KNOB CLICK PLATE 2.75

29 10L6X MECHANICAL BRAKE KNOB CLICK HOLDER 2.75

30 14CNL MECHANICAL BRAKE KNOB ASSEMBLY 36.85

31 1057X ANTI-SLIP LOCK 1.65

32 105BP BALL BEARING (5X9X3) 13.75

33 108W8 O-RING S-16 1.65

34 10C3N FIXING BOLT 2.75

35 1005E ROLLER CLUTCH *Cannot be ordered 17.05

37 10BN3 ROLLER CLUTCH INNER TUBE 6.05

38 10D55 STAR DRAG PLATE 6.05

39 10JB0 DRAG CLICK RATCHET 2.75

40 10CKS STAR DRAG WASHER 6.05

41 10C0T DRAG CLICK PIN 2.75

42 10J8A DRAG CLICK SPRING 1.65

43 10J87 DRAG SPRING HOLDER 1.65

45 10CJ4 STAR DRAG WASHER (A) 3.85

46 10R5Z STOPPER GEAR 2.75

48 10JDX WORM SHAFT GEAR SPRING 1.65

49 10HJF WORM SHAFT GEAR PIN 1.65

50 10057 WORM SHAFT GEAR 2.75

51 10U0S FIXING BOLT 1.10

52 100GK DRIVE GEAR SHAFT FIXING PLATE 1.10

53 10SAM BALL BEARING (4X7X2) 13.75

54 13PKS WASHER 1.10

56 10SZ4 O-RING 1.65

57 105NC E-TYPE RETAINING RING 2 1.10

58 10FNX WORM SHAFT GEAR 2.75

59 10N9Q WORM SHAFT BEARING (A) 1.65

60 10T7S WORM SHAFT RETAINER 1.10

61 1485R LEVEL WIND GUIDE 3.30

62 100GT WORM SHAFT 5.50

63 1485Q LEVEL WIND PIPE 7.15

64 104SP WORM SHAFT BEARING (B) 1.65

65 10G8G WASHER 1.10

67 13Y8B CLUTCH YOKE SPRING 1.10

69 101CN FIXING BOLT 1.65

70 10F42 CLUTCH CAM RETAINING PLATE 3.85

75 10559 FIXING BOLT 1.65

76 13Y8C FRAME (A) BUSHING 2.75

77 100BD FIXING BOLT 1.65

78 10MPS FIXING BOLT 1.65

80 10TED LEVEL WIND ASSEMBLY 51.70

81 100GC WORM SHAFT PIN RETAINER 1.10

82 10908 O-RING 1.65

83 100GJ WORM SHAFT PIN 4.40

84 10GA7 WASHER 1.10

89 10TP0 FIXING BOLT 1.10

90 13Y8E LINE GUARD 3.85

91 10E7H O-RING 1.10

92 10RUC BALL BEARING (3X8X2.5) *Cannot be ordered 15.95

93 10MCZ SPOOL CLUTCH PIN *Cannot be ordered 2.75

94 13Y84 SPOOL ASSEMBLY 134.75

95 10EEA FIXING BOLT 1.10

96 10TK4 BRAKE FIXING PLATE 3.85

97 10DGJ BRAKE COIL SPRING 1.10

98 10E7E MAGNET HOLDER ASSEMBLY 29.70

100 101A9 BEARING RETAINER 1.10

101 1085H MECHANICAL BRAKE WASHER 1.10

102 1006P O-RING 1.65

103 13Y8F FIXING BOLT 1.65

104 13Y8G WASHER 1.10

105 13Y8H FIXING BOLT 1.65

107 145UU WASHER 1.10

108 10T02 WASHER 2.75

110 10TNF O-RING 1.65

112 10CFZ O-RING 1.65

113 14AE2 BRAKE DIAL 31.35

301 14AE6 HANDLE FIXING NUT 4.95

302 10A0B STAR DRAG FIXING NUT 2.75

303 14CNR MAIN BODY A ASSEMBLY 132.00

304 10EDX DRIVE GEAR 29.70

305 10T7U DRIVE GEAR SHAFT 13.20

306 10DR4 FIXING BOLT 1.10

307 10EE1 PINION GEAR 23.10

308 1004W CLUTCH YOKE 1.10

309 10SX6 CLUTCH CAM 2.75

310 105ZU CLUTCH CLAW 3.85

311 10N1Z CLUTCH CLAW SPRING 1.10

312 100GE CLUTCH PLATE 2.20

313 100GD BODY A SHEET 1.65

314 14CNS FRAME ASSEMBLY 165.00

315 100GU CLUTCH LEVER RECEIVER 1.10

316 10U0N CLUTCH LEVER ASSEMBLY 7.70

317 13Y8U FRAME B RECEIVER CAM 1.10

318 10RZA BRAKE MOUNTING PLATE 3.30

319 13Y8S FRAME B RECEIVER ASSEMBLY 38.50

320 13Y8V BODY B CAM LEVER 1.10

321 13Y8W BRAKE CAM 2.75

322 13Y8X BODY B SEAL 1.10

323 14ADZ BODY B 77.00

324 14CNT BODY B ASSEMBLY 132.00

*F01 14B04 REEL BAG 11.00

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the CALCUTTA Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 26 CALCUTTA CONQUEST BFS LIMITED HG LEFT Product code: 049339 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T14:02:30+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "35 / ROLLER CLUTCH", "93 /SPOOL CLUTCH PIN" and "92 /BALL BEARING", they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10DN7 FIXING BOLT 1.65

2 10RZU RETAINER 1.10

3 14AEE HANDLE FIXING NUT 4.95

4 14AE8 HANDLE CAP 11.55

5 10DQN FIXING BOLT 1.65

6 104VX BALL BEARING (4X7X2.5) 13.75

7 104FH WASHER 2.20

8 14AE7 HANDLE KNOB 88.00

9 14CNJ HANDLE SHANK ASSEMBLY 34.10

10 14CNK HANDLE ASSEMBLY 203.50

11 13V36 HANDLE BEARING SEAT WASHER 1.65

12 10KXV STAR DRAG CLICK PLATE RETAINER 1.65

13 10J1Y STAR DRAG CLICK PLATE 1.65

14 10B27 CLICK PIN 1.65

15 10988 CLICK SPRING 1.65

16 14AEC STAR DRAG 22.00

17 100CU WASHER 1.10

18 10A71 STAR DRAG SPRING 2.75

19 10A0C STAR DRAG LOCK NUT 2.75

20 10J1N STAR DRAG SPACER 1.65

21 10D60 MAIN GEAR WASHER (C) 1.65

22 105PW STAR DRAG BEARING WASHER 1.10

23 10EX8 BALL BEARING (8X12X3.5) 13.75

24 1027V O-RING 1.65

25 14AEB MECHANICAL BRAKE KNOB 20.35

26 10896 MECHANICAL BRAKE WASHER 1.10

27 1057S SPOOL SHAFT STOP (B) 1.10

28 10L2F MECHANICAL BRAKE KNOB CLICK PLATE 2.75

29 10L6X MECHANICAL BRAKE KNOB CLICK HOLDER 2.75

30 14CNL MECHANICAL BRAKE KNOB ASSEMBLY 36.85

31 1057X RETAINER 1.65

32 105BP BALL BEARING (5X9X3) 13.75

33 108W8 O-RING S-16 1.65

34 10C3N FIXING BOLT 2.75

35 1005E ROLLER CLUTCH *Cannot be ordered 17.05

37 10BN3 ROLLER CLUTCH INNER TUBE 6.05

38 10D55 STAR DRAG PLATE 6.05

39 10JB0 DRAG CLICK RATCHET 2.75

40 10CKS STAR DRAG WASHER 6.05

41 10C0T DRAG CLICK PIN 2.75

42 10J8A DRAG CLICK SPRING 1.65

43 10J87 DRAG SPRING HOLDER 1.65

45 10CJ4 STAR DRAG WASHER (A) 3.85

46 10R5Z STOPPER GEAR 2.75

47 13ULL DRIVE GEAR SHAFT 13.20

48 10JDX WORM SHAFT GEAR SPRING 1.65

49 10HJF WORM SHAFT GEAR PIN 1.65

50 10057 WORM SHAFT GEAR 2.75

51 10U0S FIXING BOLT 1.10

52 100GK DRIVE GEAR SHAFT FIXING PLATE 1.10

53 10SAM BALL BEARING (4X7X2) 13.75

54 13PKS WASHER 1.10

55 10DR5 FIXING BOLT 1.10

56 10SZ4 O-RING 1.65

57 105NC E-TYPE RETAINING RING 2 1.10

58 10FNX WORM SHAFT GEAR 2.75

59 10N9Q WORM SHAFT BEARING (A) 1.65

60 10T7S WORM SHAFT RETAINER 1.10

61 1485R LEVEL WIND GUIDE 3.30

62 100GT WORM SHAFT 5.50

63 1485Q LEVEL WIND PIPE 7.15

64 104SP WORM SHAFT SUPPORT (B) 1.65

65 10G8G WASHER 1.10

67 13Y8B CLUTCH YOKE SPRING 1.10

68 10EE4 CLUTCH YOKE 1.10

69 101CN FIXING BOLT 1.65

70 10F42 CLUTCH CAM PRESSURE PLATE 3.85

71 10SKS CLUTCH CAM 2.75

72 105ZV CLUTCH CLAW 3.85

73 14026 CLUTCH CLAW SPRING 1.65

74 13TD2 CLUTCH PLATE 2.20

75 10559 FIXING BOLT 1.65

76 13Y8C FRAME (A) BUSHING 2.75

77 100BD FIXING BOLT 1.65

78 10MPS FIXING BOLT 1.65

79 13UEF MAIN BODY A SHEET 1.65

80 10TED LEVEL WIND ASSEMBLY 51.70

81 100GC WORM SHAFT PIN RETAINER 1.10

82 10908 O-RING 1.65

83 100GJ WORM SHAFT PIN 4.40

84 10GA7 WASHER 1.10

85 14CNN FRAME ASSEMBLY 165.00

86 13TD3 CLUTCH LEVER SUPPORT 1.10

87 10282 CLUTCH LEVER ASSEMBLY 7.70

88 13Y8D FRAME B SUPPORT CAM 1.10

89 10TP0 FIXING BOLT 1.10

90 13Y8E LINE GUARD 3.85

91 10E7H O-RING 1.10

92 10RUC BALL BEARING (3X8X2.5) *Cannot be ordered 15.95

93 10MCZ SPOOL CLUTCH PIN *Cannot be ordered 2.75

94 13Y84 SPOOL ASSEMBLY 134.75

95 10EEA FIXING BOLT 1.10

96 10TK4 BRAKE FIXING PLATE 3.85

97 10DGJ BRAKE COIL SPRING 1.10

98 10E7E MAGNET HOLDER ASSEMBLY 29.70

99 10EEK BRAKE MOUNTING BASE 3.30

100 101A9 BEARING RETAINER 1.10

101 1085H MECHANICAL BRAKE WASHER 1.10

102 1006P O-RING 1.65

103 13Y8F FIXED BOLT 1.65

104 13Y8G WASHER 1.10

105 13Y8H FIXED BOLT 1.65

106 13Y85 FRAME B RECEIVER ASSEMBLY 38.50

107 145UU WASHER 1.10

108 10T02 WASHER 2.75

109 13Y8J MAIN BODY B CAM LEVER 1.10

110 10TNF O-RING 1.65

111 13Y8K BRAKE CAM 2.75

112 10CFZ O-RING 1.65

113 14AE2 BRAKE DIAL 31.35

114 13Y8M MAIN BODY B SEAL 1.10

115 14AE1 MAIN BODY B 77.00

116 14CNP MAIN BODY B ASSEMBLY 132.00

201 14CNQ MAIN BODY A ASSEMBLY 132.00

202 10EEE DRIVE GEAR 24.75

203 10RZC PINION GEAR 17.05

*F01 14B04 REEL BAG 11.00

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the CALCUTTA Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 26 CALCUTTA CONQUEST BFS LIMITED HG RIGHT Product code: 049322 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T14:01:48+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "35 / ROLLER CLUTCH", "93 /SPOOL CLUTCH PIN" and "92 /BALL BEARING", they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10DN7 FIXING BOLT 1.65

2 10RZU RETAINER 1.10

4 14AE8 HANDLE CAP 11.55

5 10DQN FIXING BOLT 1.65

6 104VX BALL BEARING (4X7X2.5) 13.75

7 104FH WASHER 2.20

8 14AE7 HANDLE KNOB 88.00

9 14CNJ HANDLE SHANK ASSEMBLY 34.10

10 14CNK HANDLE ASSEMBLY 203.50

11 13V36 HANDLE BEARING WASHER 1.65

12 10KXV STAR DRAG CLICK PLATE RETAINER 1.65

13 10J1Y STAR DRAG CLICK PLATE 1.65

14 10B27 CLICK PIN 1.65

15 10988 CLICK SPRING 1.65

16 14AEC STAR DRAG 22.00

17 100CU WASHER 1.10

18 10A71 STAR DRAG SPRING 2.75

20 10J1N STAR DRAG SPACER 1.65

21 10D60 MAIN GEAR WASHER (C) 1.65

22 105PW STAR DRAG BEARING WASHER 1.10

23 10EX8 BALL BEARING (8X12X3.5) 13.75

24 1027V O-RING 1.65

25 14AEB MECHANICAL BRAKE KNOB 20.35

26 10896 MECHANICAL BRAKE WASHER 1.10

27 1057S SPOOL SHAFT STOPPER (B) 1.10

28 10L2F MECHANICAL BRAKE KNOB CLICK PLATE 2.75

29 10L6X MECHANICAL BRAKE KNOB CLICK HOLDER 2.75

30 14CNL MECHANICAL BRAKE KNOB ASSEMBLY 36.85

31 1057X ANTI-SLIP LOCK 1.65

32 105BP BALL BEARING (5X9X3) 13.75

33 108W8 O-RING S-16 1.65

34 10C3N FIXING BOLT 2.75

35 1005E ROLLER CLUTCH *Cannot be ordered 17.05

37 10BN3 ROLLER CLUTCH INNER TUBE 6.05

38 10D55 STAR DRAG PLATE 6.05

39 10JB0 DRAG CLICK RATCHET 2.75

40 10CKS STAR DRAG WASHER 6.05

41 10C0T DRAG CLICK PIN 2.75

42 10J8A DRAG CLICK SPRING 1.65

43 10J87 DRAG SPRING HOLDER 1.65

45 10CJ4 STAR DRAG WASHER (A) 3.85

46 10R5Z STOPPER GEAR 2.75

48 10JDX WORM SHAFT GEAR SPRING 1.65

49 10HJF WORM SHAFT GEAR PIN 1.65

50 10057 WORM SHAFT GEAR 2.75

51 10U0S FIXING BOLT 1.10

52 100GK DRIVE GEAR SHAFT FIXING PLATE 1.10

53 10SAM BALL BEARING (4X7X2) 13.75

54 13PKS WASHER 1.10

56 10SZ4 O-RING 1.65

57 105NC E-TYPE RETAINING RING 2 1.10

58 10FNX WORM SHAFT GEAR 2.75

59 10N9Q WORM SHAFT BEARING (A) 1.65

60 10T7S WORM SHAFT RETAINER 1.10

61 1485R LEVEL WIND GUIDE 3.30

62 100GT WORM SHAFT 5.50

63 1485Q LEVEL WIND PIPE 7.15

64 104SP WORM SHAFT BEARING (B) 1.65

65 10G8G WASHER 1.10

67 13Y8B CLUTCH YOKE SPRING 1.10

69 101CN FIXING BOLT 1.65

70 10F42 CLUTCH CAM RETAINING PLATE 3.85

75 10559 FIXING BOLT 1.65

76 13Y8C FRAME (A) BUSHING 2.75

77 100BD FIXING BOLT 1.65

78 10MPS FIXING BOLT 1.65

80 10TED LEVEL WIND ASSEMBLY 51.70

81 100GC WORM SHAFT PIN RETAINER 1.10

82 10908 O-RING 1.65

83 100GJ WORM SHAFT PIN 4.40

84 10GA7 WASHER 1.10

89 10TP0 FIXING BOLT 1.10

90 13Y8E LINE GUARD 3.85

91 10E7H O-RING 1.10

92 10RUC BALL BEARING (3X8X2.5) *Cannot be ordered 15.95

93 10MCZ SPOOL CLUTCH PIN *Cannot be ordered 2.75

94 13Y84 SPOOL ASSEMBLY 134.75

95 10EEA FIXING BOLT 1.10

96 10TK4 BRAKE FIXING PLATE 3.85

97 10DGJ BRAKE COIL SPRING 1.10

98 10E7E MAGNET HOLDER ASSEMBLY 29.70

100 101A9 BEARING RETAINER 1.10

101 1085H MECHANICAL BRAKE WASHER 1.10

102 1006P O-RING 1.65

103 13Y8F FIXING BOLT 1.65

104 13Y8G WASHER 1.10

105 13Y8H FIXING BOLT 1.65

107 145UU WASHER 1.10

108 10T02 WASHER 2.75

110 10TNF O-RING 1.65

112 10CFZ O-RING 1.65

113 14AE2 BRAKE DIAL 31.35

301 14AE6 HANDLE FIXING NUT 4.95

302 10A0B STAR DRAG FIXING NUT 2.75

305 10T7U DRIVE GEAR SHAFT 13.20

306 10DR4 FIXING BOLT 1.10

308 1004W CLUTCH YOKE 1.10

309 10SX6 CLUTCH CAM 2.75

310 105ZU CLUTCH PAWL 3.85

311 10N1Z CLUTCH PAWL SPRING 1.10

312 100GE CLUTCH PLATE 2.20

313 100GD MAIN BODY A SEAT 1.65

314 14CNS FRAME ASSEMBLY 165.00

315 100GU CLUTCH LEVER MOUNT 1.10

316 10U0N CLUTCH LEVER ASSEMBLY 7.70

317 13Y8U FRAME B MOUNT CAM 1.10

318 10RZA BRAKE MOUNTING PLATE 3.30

319 13Y8S FRAME B MOUNT ASSEMBLY 38.50

320 13Y8V MAIN BODY B CAM LEVER 1.10

321 13Y8W BRAKE CAM 2.75

322 13Y8X MAIN BODY B SEAL 1.10

323 14ADZ MAIN BODY B 77.00

324 14CNT MAIN BODY B ASSEMBLY 132.00

401 14CNU MAIN BODY A ASSEMBLY 132.00

402 10RZE DRIVE GEAR 24.75

403 10RZS PINION GEAR 17.05

*F01 14B04 REEL POUCH 11.00

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the CALCUTTA Series Are Available Here!

[DAIWA] Genuine Spare Parts for 22 SILVER WOLF SV TW PE SPECIAL 1000XHL Product code: 00631517 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T14:00:30+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship this item after you order unless we have in stock at the time of your order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

No. Part Name Part Code Price (USD)

1 RS PLATE 6M309201 40.70

2 LEVER PLATE SP 6J631901 2.20

3 LEVER PLATE PIN 6J286301 2.20

4 RS PLATE O-RING 6J197901 1.10

5 LEVER PLATE (A) 6M049001 4.40

6 LEVER PLATE (B) 6J286101 2.20

7 LEVER PLATE (C) 6J645201 2.20

8 BRAKE DIAL SC 6G940402 2.20

9 BRAKE DIAL W 6H159201 1.10

10 BRAKE DIAL 6M053601 7.70

11 BRAKE DIAL LEAF SP 6J886201 2.20

12 SET PLATE 6M054601 44.00

13 MAG HOLDER 6M054701 24.20

14 SET PLATE SC (A) 6H666002 2.20

15 SET PLATE SC (B) 6G939303 2.20

16 MAG HOLDER RING 6J315701 2.20

17 RS BEARING W (A) 63757404 1.10

18 RS BEARING W (B) 63757411 1.10

19 RS BEARING W (C) 6G185101 1.10

20 RS BALL BEARING 6G511506 15.40

21 RS BALL BEARING O-RING 6G703201 1.10

22 RS BEARING RING 6F032201 2.20

23 SPOOL HOLDER O-RING 6H770601 1.10

24 SPOOL HOLDER SP RETAINER 63208002 2.20

25 SPOOL HOLDER COLLAR (B) W 6J497001 1.10

26 SPOOL HOLDER COLLAR (B) SP 6M042201 2.20

27 SPOOL HOLDER COLLAR (B) 6M391901 3.30

28 SPOOL HOLDER SP 6M042001 2.20

29 SPOOL HOLDER 6M308701 19.80

30 SPOOL HOLDER COLLAR (A) 6M041701 2.20

31 SPOOL HOLDER COLLAR (A) W 63755202 1.10

33 SPOOL PIN 6H358801 2.20

34 SPOOL BEARING COLLAR 6H232201 2.20

35 SPOOL BALL BEARING SP 6M052601 2.20

36 SPOOL BALL BEARING W (A) 6M052501 1.10

37 SPOOL (23-37, 120-122) 6Z026601 176.00

38 FRAME 6M309601 74.80

39 FRONT COVER 6M041003 12.10

40 FRONT COVER SC 6H531508 2.20

41 CLUTCH LEVER 6M048401 9.90

42 CLUTCH LEVER PLATE (L) 6M040501 2.20

43 CLUTCH LEVER PLATE (R) *Not available 6M040601 2.20

44 OSCILLATING POST 6M041101 2.20

45 LS COVER PLATE 6M047901 2.20

46 CLUTCH CAM BALL BEARING 6G431008 15.40

47 CLUTCH CAM BEARING COLLAR 6M518401 7.70

48 KICK LEVER PLATE (A) 6M048301 3.30

49 KICK LEVER PLATE SC 6H531508 2.20

50 KICK LEVER PLATE SP 6M060601 2.20

51 KICK LEVER 6J638601 6.60

52 CLUTCH CAM PLATE (A) 6M048201 2.20

53 CLUTCH CAM 6M048001 3.30

54 CLUTCH CAM PLATE (B) 6M048101 3.30

55 CLUTCH CAM PLATE (B) W 6M070001 1.10

56 CLUTCH CAM PLATE (B) SC 6B360406 2.20

57 CLUTCH CAM PLATE (C) 6H659101 3.30

58 CLUTCH CAM PLATE SC 6B032904 2.20

59 CLUTCH PLATE 6M157501 3.30

60 CLUTCH SP 6J313901 2.20

61 PINION + DRIVE GEAR SET 6Z026670 56.10

62 PINION RING 6H448401 2.20

63 PINION BEARING W 6J073501 1.10

64 PINION BALL BEARING *Cannot be ordered 6J019303 45.10

65 PINION BEARING COLLAR *Cannot be ordered 6J724501 7.70

66 LS PLATE 6M308901 67.10

67 ZERO ADJUSTER O-RING 6J279701 1.10

68 PINION SHAFT 6G931001 3.30

69 ZERO ADJUSTER W (A) 6H161001 1.10

70 ZERO ADJUSTER W (B) 6B175503 1.10

71 ZERO ADJUSTER 6J279602 19.80

72 LS PLATE SC (A) 6G945811 2.20

73 LS PLATE SC (B) 6G040802 2.20

74 LS PLATE SC (C) 6G945818 2.20

75 WORM SHAFT RETAINER 63205901 2.20

76 WORM SHAFT W 6B411702 1.10

77 WORM SHAFT COLLAR 6G720001 2.20

78 LEVEL WINDING 6M054201 58.30

79 LEVEL WINDING PIN 6J740201 3.30

80 POLE 6J740101 3.30

81 POLE W 6M161301 1.10

82 LEVEL WINDING O-RING 6G252202 1.10

83 WORM SHIELD 6M048901 3.30

84 WORM SHAFT 6M016701 8.80

85 WORM SHAFT COLLAR 6G720001 2.20

86 WORM SHAFT GEAR 6M048801 4.40

87 WORM SHAFT GEAR RETAINER 6B339801 2.20

88 GEAR SHAFT W 6G099801 1.10

89 GEAR SHAFT RETAINER 63208002 2.20

90 GEAR SHAFT BALL BEARING 6G466201 15.40

91 GEAR SHAFT PLATE (A) 6J281101 3.30

92 GEAR SHAFT PLATE SC 6G297002 2.20

93 WORM GEAR 6M048601 3.30

94 GEAR SHAFT 6M308402 18.70

95 RATCHET 6H660901 3.30

96 RATCHET W 6E708901 2.20

97 PINION + DRIVE GEAR SET 6Z026670 56.10

98 DRAG W 6H359001 8.80

99 DRIVE COLLAR 6J740501 17.60

100 DRIVE COLLAR SP 6M025201 2.20

101 DRIVE COLLAR PIN 6J566201 2.20

102 CLUTCH RING 6J327701 8.80

103 ONE-WAY CLUTCH 6G819801 20.90

104 CLUTCH RING W 6B553803 1.10

105 HANDLE BALL BEARING 6G431008 15.40

106 HANDLE BALL BEARING W 6B553801 1.10

107 DRAG HOLDER 6F028203 3.30

108 DRAG LEAF SP 6F032401 2.20

109 DRAG SP・W 61508901 2.20

110 STAR DRAG W 6H929501 2.20

111 STAR DRAG NUT 6J141002 7.70

112 STARDRAG SP 6J011901 2.20

113 STAR DRAG 6J673908 30.80

114 HANDLE W (A) 6J102801 1.10

115 HANDLE W (B) 6J101301 3.30

116 HANDLE 6M308301 94.60

117 HANDLE NUT 6G793310 4.40

118 HANDLE CAP 6J625401 4.40

119 HANDLE CAP SC 6G835504 2.20

120 SPOOL BALL BEARING W (B) 6F774601 1.10

121 SPOOL BEARING RING 6J149501 2.20

122 SPOOL BALL BEARING 6G511506 15.40

200 HANDLE KNOB W 6B411703 1.10

201 HANDLE KNOB SP・W 6H744801 1.10

202 HANDLE KNOB 6M009801 24.20

203 HANDLE KNOB BALL BEARING 6G469009 15.40

204 HANDLE KNOB SC 6B679308 2.20

205 HANDLE KNOB CAP 6M009602 2.20

[SHIMANO] Overhaul Bearing for 26 CALCUTTA CONQUEST BFS (sold separately)

HEDGEHOG STUDIO — 2026-08-20T14:00:17+09:00

| All bearings are sold separately for those who wish to overhaul the reels by themselves.

Overhauling is a difficult maintenance work for intermediate level users and above.
For first-time tuners, we recommend starting with a simple Bearing Upgrade Kit.

Click on the bearing part number below to enter the individual bearing sales page and purchase the bearing from the link.

| Compatibility chart of all bearings inside the reel

- SHG: HEDGEHOG STUDIO Premium Bearing
- HRCB: HEDGEHOG STUDIO Anti-rust bearing
- S A-RB: SHIMANO Genuine Anti-rust Bearing
- CRBB: DAIWA Genuine Anti-rust Bearing

| Click on the part numbers below to see the reel schematic of the 26 CALCUTTA CONQUEST BFS LIMITED:

HG RIGHT / HG LEFT / XG RIGHT / XG LEFT

| 26 CALCUTTA CONQUEST BFS LIMITED (HG RIGHT, HG LEFT, XG RIGHT, XG LEFT)

- 0006 104VX Ball Bearing (4x7x2.5)
SHG-740ZZ or HRCB-740ZHi

- 0023 10EX8 Ball Bearing (8x12x3.5)
SHG-1280ZZ or HRCB-1280ZHi

- 0032 105BP Ball Bearing (5x9x3)
SHG-950ZZ or HRCB-950ZHi

- 0053 10SAM Ball Bearing (4x7x2)
SHG-740 or HRCB-740Hi

- 0092 10RUC Ball Bearing (3x8x2.5)
SHG-830 or S A-RB-830

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the CALCUTTA Series Are Available Here!

[ABU] Genuine Spare Parts for REVO BIGSHOOTER COMPACT8 Product code:1487592 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T13:46:34+09:00

ATTENTION:

- An additional US$5.00 commission will be charged.
* Please select "+US$5.00 for Genuine Parts" for the commission in STEP 2 on the order screen.

- All back-ordered items require approximately 3 to 4 weeks to be prepared for shipment.

- We do not accept order cancellations, changes, or refunds after an order is placed. (This is because SHIMANO / DAIWA / ABU JAPAN do not accept cancellations.)

- Please note that this does not guarantee that the manufacturer has the item in stock.

- If the ordered part is not available from the manufacturer and the delivery date is undetermined, the order will be canceled.

- When ordering multiple parts, if some items are unavailable, only the parts that are in stock will be prepared and supplied.

* Please make sure to read the conditions carefully before placing your order.

In-Stock Abu Garcia Genuine Parts

By clicking the banner below, you can purchase Abu Garcia genuine spare parts that are currently in stock.

Reel Part's Schematic Diagram

Schematic
Number Part Number Part Name Price
(USD)

1 1499313 FRAME 55.00

2 1415607 SLIDE WASHER 2.20

3 1415608 SLIDE WASHER 2.20

4 1452852 LINE GUIDE 5.50

6 1280905 LEVEL WIND TUBE 3.30

7 1280906 WORM SHAFT 16.50

8 1125729 BALLBEARING 6.60

9 1125732 WORM SHAFT GEAR 1.10

10 1125733 WORM SHAFT PIN 0.55

11 1452762 LINE GUIDE SHAFT 3.30

13 1313359 WORM SHAFT PIN HOLDER 2.20

14 1490867 WASHER 2.20

15 1124201 RETAINER 0.55

16 1125806 PAWL 3.30

17 1116193 WASHER 0.55

18 1129323 LINE GUIDE NUT 0.77

19 1452923 FRONT COVER 5.50

20 1452764 SCREW 2.20

21 1452765 CLUTCH CAM 3.30

22 1415619 LINK PLATE 2.20

23 1415620 SCREW 2.20

24 1289969 KICK LEVER 3.30

25 1452766 CLUTCH SPRING 2.20

26 1125745 KICK LEVER SPRING 0.55

27 1185695 WORM SHAFT WASHER 1.76

28 1415621 CLUTCH PLATE 2.20

29 1415622 SCREW 2.20

30 1380616 SCREW 2.20

31 1452767 THUMB BAR 3.30

32 1252078 SCREW 1.76

33 1499314 MAIN GEAR SHAFT 13.20

34 1125747 WASHER 0.55

35 1251634 LEVEL WIND GEAR 1.76

36 1281130 MAIN GEAR SHAFT PLATE 2.20

37 1187625 SPOOL BALL BEARING 8.80

38 1124201 RETAINER 0.55

39 1372152 SCREW 2.20

40 1281131 YOKE 2.20

41 1493329 PINION 11.00

43 1452769 RATCHET 2.20

44 1452770 DRAG WASHER 3.30

45 1452875 MAIN GEAR 27.50

47 1452855 DRAG WASHER 5.50

48 1452856 DRAG WASHER 2.20

51 1452857 PRESSURE WASHER 2.20

52 1257782 SLEEVE 2.20

53 1452773 WASHER 2.20

54 1116237 YOKE SPRING 0.55

55 1125766 PINION SHAFT 5.50

56 1116226 RETAINER 0.55

57 1499330 GEAR SIDE PLATE 33.00

58 1275594 OWC 27.50

59 1499316 COLLAR 3.30

61 1452775 O-RING 2.20

62 1493307 BALL BEARING 27.50

63 1104790 RING 0.55

64 1125768 CLICK WASHER 1.10

65 1125769 CLICK SPRING 1.65

66 1452776 FRICTION WASHER 1.10

67 1125771 RUBBER WASHER 0.55

68 1452777 CLICK WASHER 2.20

69 1499317 BRAKE KNOB 16.50

70 1452779 SCREW 2.20

71 1452780 SCREW 2.20

72 1415630 LUBE PORT 2.20

73 1252078 SCREW 1.76

74 1125779 CLICK SPRING HOLDER 1.65

75 1125780 CLICK SPRING 0.77

76 1117208 SPRING WASHER 0.55

77 1132935 WASHER 0.55

78 1499331 STAR WHEEL 27.50

79 1125783 WASHER 0.55

80 1499319 PALM SIDE PLATE 38.50

81 1415757 MAG DIAL 3.30

82 1415634 MAG DIAL PLATE 2.20

83 1125780 CLICK SPRING 0.77

84 1415635 SLIDE CAM 3.30

85 1185710 RIGHT SIDE COVER CAP SCREW 0.55

86 1125771 RUBBER WASHER 0.55

87 1452785 BEARING HOUSING 16.50

88 1313372 CLICK PIN SPRING 2.20

89 1313371 CLICK PIN 2.20

90 1452786 CAM LOCK LEVER 3.30

91 1452787 MAGNET HOLDER 3.30

92 1453268 MAGNET PLATE 2.20

93 1116222 MAGNET 2.20

94 1452788 MAGNET PLATE 2.20

95 1302674 MAGNET 4.40

96 1313476 SPRING 2.20

97 1415641 SLIDE CAM 3.30

98 1380655 SCREW 2.20

99 1415622 SCREW 2.20

100 1125797 WASHER 0.55

101 1128194 BALLBEARING 8.80

102 1104790 RING 0.55

106 1308854 SPOOL (K) 60.50

107 1144215 BALL BEARING 8.80

108 1192826 SPOOL SHAFT PIN 2.20

114 1308857 HANDLE 22.00

115 1208088 BUSHING FOR BALL BEARING 2.20

116 1347132 HANDLE KNOB 8.80

117 1281319 BALL BEARING 6.60

118 1281320 SCREW 1.76

119 1347133 HANDLE KNOB CAP 6.60

121 1372161 HANDLE NUT 2.20

122 1252035 HANDLE NUT COVER 3.30

123 1203407 SCREW 0.55

124 1499332 GEAR SIDE COMPLETE 49.50

125 1499321 HANDLE COMPLETE 88.00

126 1499322 PALM SIDE COMPLETE 154.00

127 1308855 SPOOL COMPLETE (K) 77.00

* Items Marked “For Repair Use Only” Are Not Available for Individual Parts Sales

Order Flow

(STEP 1: Customer)
Please add the ordered parts from the parts list to your cart and complete the payment together with the Commission for [SHIMANO / DAIWA / ABU] Back-order Genuine Parts (US$5.00).
↓
(STEP 2: Our Shop)
We review your order details and place the order with the manufacturer.
↓
(STEP 3: Manufacturer)
Only for parts that are not in stock, we will receive a notification from the manufacturer approximately one week later.
Parts that are in stock will arrive at our shop in about one month.
* If all ordered parts are in stock, there will be no notification from the manufacturer or our shop until the shipment is dispatched. Please wait until shipping.
↓
(STEP 4: Our Shop)
Once the parts arrive from the manufacturer, we will dispatch your order.

* Please note that it generally takes about one month for genuine spare parts to arrive.
* If you order both back-ordered items and in-stock items together, they will be shipped together after all back-ordered items arrive.
* If you would like to receive in-stock items first, please place and pay for each order separately.

* The parts list pages will be expanded gradually.
If the parts list for your reel is not yet available, please place your order by manually entering the details using the order form below.

Genuine Spare Parts Order Form
https://www.hedgehog-studio.co.jp/form/parts

Regarding What You Can and Cannot Order for the Spare Parts

We source and provide genuine spare parts for SHIMANO / DAIWA / ABU reels only from the official Japanese websites listed below.
(We cannot assist with translating these websites. Please use Google Translate or other translation tools if necessary.)

| Parts that CANNOT be Ordered

- Spare parts for certain reel models (mainly older models) marked as “Unrepairable” on the SHIMANO website.

https://www.shimanofishingservice.jp/price.php

- Spare parts marked as “Just for Repair,” “Suspended,” or “Discontinued” on the DAIWA website.

http://www.sl-planets.co.jp/shop/c/

- Spare parts that do not have a part number or part code shown in the schematic diagrams on the SHIMANO / DAIWA websites.

- Spare parts marked as “For Repair Only” on the ABU website.

https://pfj-parts.com/
Please note that even for discontinued ABU reel models, parts may still be ordered if stock is available.

- Parts other than reel-related spare parts, such as rods or other fishing gear.

| Spare Spools, Bearings, and Other Tuning Parts Compatible with Revo 2019 Series Here!

[ABU] Genuine Spare Parts for MORRUM ZX 3601 IVCB-4 Product code: 1205068 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T13:44:27+09:00

ATTENTION:

- An additional US$5.00 commission will be charged.
* Please select "+US$5.00 for Genuine Parts" for the commission in STEP 2 on the order screen.

- All back-ordered items require approximately 3 to 4 weeks to be prepared for shipment.

- We do not accept order cancellations, changes, or refunds after an order is placed. (This is because SHIMANO / DAIWA / ABU JAPAN do not accept cancellations.)

- Please note that this does not guarantee that the manufacturer has the item in stock.

- If the ordered part is not available from the manufacturer and the delivery date is undetermined, the order will be canceled.

- When ordering multiple parts, if some items are unavailable, only the parts that are in stock will be prepared and supplied.

* Please make sure to read the conditions carefully before placing your order.

In-Stock Abu Garcia Genuine Parts

By clicking the banner below, you can purchase Abu Garcia genuine spare parts that are currently in stock.

Reel Part's Schematic Diagram

Schematic Number Part Number Part Name Price (USD)

5131 SPRING WASHER 2.20

9764 WASHER 2.20

13362 SCREW 2.20

21715 SCREW 2.20

25398 BRAKE WEIGHT ARM 3.30

25802 DRAIVE GEAR PLATE 2.20

25803 LOCK WASHER 6.60

25807 IVCB-DIAL 8.80

25808 IVCB-CAM 8.80

25810 BRAKE PLATE HOLDER 8.80

25812 COG WHEEL 2.20

25813 COG WHEEL 2.20

25815 LOCKER BUSHING 3.30

25818 BRAKE WEIGHT HOLDER 3.30

25837 SPRING HOLDER 6.60

25841 LIFT PLATE 13.20

25864 PINION GEAR 31.90

25865 DRAIVE GEAR 44.00

25874 BRAKE CLICK SPRING 5.50

25875 BRAKE CLICK RATCHET 5.50

25876 BRAKE CLICK RATCHET 2.20

25877 DRAG CLICK SPRING 5.50

25879 DRAG CLICK RATCHET 2.20

25885 O-RING 2.20

25886 CAP WASHER 2.20

25890 RATCHET HOLDER 5.50

51765 PILOT GUIDE 6.60

1128194 BALLBEARING 8.80

1137327 HANDLE 33.00

1140957 BALL BEARING 33.00

1141514 BALLBEARING 13.20

1141521 INNERPLATE RIGHT 22.00

1141523 OUTER SIDE PLATE RIGHT 88.00

1141528 BRAKEWASHER 6.60

1141531 INNERPLATE LEFT 22.00

1141532 BALLBEARING 13.20

1141535 OUTER SIDE PLATE 94.60

1141538 SPOOL CONTROL CAP 16.50

1153550 CLICKPLATE 8.80

1157042 SCREW 2.20

1157043 STAR WHEEL 22.00

1160543 MAIN GEAR BUSHING 22.00

1160560 LINE CARRIAGE 22.00

1160766 SPRING 2.20

1160820 SPRING 2.20

1205084 FRAME 176.00

1205492 LEVELWIND TUBE 16.50

1208144 WORM SHAFT COMPLETE 44.00

1224248 SPOOL 95.70

* Items Marked “For Repair Use Only” Are Not Available for Individual Parts Sales

Order Flow

(STEP 1: Customer)
Please add the ordered parts from the parts list to your cart and complete the payment together with the Commission for [SHIMANO / DAIWA / ABU] Back-order Genuine Parts (US$5.00).
↓
(STEP 2: Our Shop)
We review your order details and place the order with the manufacturer.
↓
(STEP 3: Manufacturer)
Only for parts that are not in stock, we will receive a notification from the manufacturer approximately one week later.
Parts that are in stock will arrive at our shop in about one month.
* If all ordered parts are in stock, there will be no notification from the manufacturer or our shop until the shipment is dispatched. Please wait until shipping.
↓
(STEP 4: Our Shop)
Once the parts arrive from the manufacturer, we will dispatch your order.

* Please note that it generally takes about one month for genuine spare parts to arrive.
* If you order both back-ordered items and in-stock items together, they will be shipped together after all back-ordered items arrive.
* If you would like to receive in-stock items first, please place and pay for each order separately.

* The parts list pages will be expanded gradually.
If the parts list for your reel is not yet available, please place your order by manually entering the details using the order form below.

Genuine Spare Parts Order Form
https://www.hedgehog-studio.co.jp/form/parts

Regarding What You Can and Cannot Order for the Spare Parts

We source and provide genuine spare parts for SHIMANO / DAIWA / ABU reels only from the official Japanese websites listed below.
(We cannot assist with translating these websites. Please use Google Translate or other translation tools if necessary.)

| Parts that CANNOT be Ordered

- Spare parts for certain reel models (mainly older models) marked as “Unrepairable” on the SHIMANO website.

https://www.shimanofishingservice.jp/price.php

- Spare parts marked as “Just for Repair,” “Suspended,” or “Discontinued” on the DAIWA website.

http://www.sl-planets.co.jp/shop/c/

- Spare parts that do not have a part number or part code shown in the schematic diagrams on the SHIMANO / DAIWA websites.

- Spare parts marked as “For Repair Only” on the ABU website.

https://pfj-parts.com/
Please note that even for discontinued ABU reel models, parts may still be ordered if stock is available.

- Parts other than reel-related spare parts, such as rods or other fishing gear.

| Spare Spools, Bearings, and Other Tuning Parts Compatible with MORRUM Series Here!

[ABU] Genuine Spare Parts for Roxani BC HS8 Product code: 1613877 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T13:40:46+09:00

ATTENTION:

- An additional US$5.00 commission will be charged.
* Please select "+US$5.00 for Genuine Parts" for the commission in STEP 2 on the order screen.

- All back-ordered items require approximately 3 to 4 weeks to be prepared for shipment.

- We do not accept order cancellations, changes, or refunds after an order is placed. (This is because SHIMANO / DAIWA / ABU JAPAN do not accept cancellations.)

- Please note that this does not guarantee that the manufacturer has the item in stock.

- If the ordered part is not available from the manufacturer and the delivery date is undetermined, the order will be canceled.

- When ordering multiple parts, if some items are unavailable, only the parts that are in stock will be prepared and supplied.

* Please make sure to read the conditions carefully before placing your order.

In-Stock Abu Garcia Genuine Parts

By clicking the banner below, you can purchase Abu Garcia genuine spare parts that are currently in stock.

Reel Part's Schematic Diagram

Schematic
Number Part Number Part Name Price
(USD)

1 1621622 FRAME 55.00

2 1490482 SLIDE WASHER RIGHT 2.20

3 1490483 SLIDE WASHER LEFT 2.20

4 1593002 LINE GUIDE 5.50

6 1137750 LEVEL WIND TUBE 3.30

7 1125805 WORM SHAFT 16.50

8 1125729 BALLBEARING 6.60

9 1125732 WORM SHAFT GEAR 1.10

10 1125733 WORM SHAFT PIN 0.55

11 1490485 LINE GUIDE SHAFT 3.30

12 1592946 GUIDE PIN 3.30

13 1313359 WORM SHAFT PIN HOLDER 2.20

14 1185695 WORM SHAFT WASHER 1.76

15 1124201 RETAINER 0.55

16 1125806 PAWL 3.30

17 1125736 WASHER 0.55

18 1129323 LINE GUIDE NUT 0.77

22 1621623 FRONT COVER 6.60

23 1415620 SCREW 2.20

25 1144194 STOPPER 9.90

27 1592948 CLUTCH CAM 3.30

28 1415619 LINK PLATE 2.20

29 1415620 SCREW 2.20

30 1289969 KICK LEVER 3.30

31 1380524 CLUTCH SPRING 2.20

32 1490489 KICK LEVER SPRING 2.20

33 1490867 WASHER 2.20

34 1592969 BUSH 2.20

35 1581432 CLUTCH PLATE 3.30

36 1214269 SCREW 2.20

37 1116206 SCREW 0.55

38 1592970 THUMB BAR 3.30

39 1252078 SCREW 1.76

40 1621624 MAIN GEAR SHAFT 13.20

41 1380528 WASHER 2.20

42 1251634 LEVEL WIND GEAR 1.76

43 1490492 MAIN GEAR SHAFT PLATE 2.20

44 1592972 WASHER 2.20

45 1116186 BALL BEARING 6.60

46 1124201 RETAINER 0.55

47 1116183 SCREW 0.55

48 1281131 YOKE 2.20

49 1621657 PINION 22.00

50 1452769 RATCHET 2.20

51 1490874 DRAG WASHER 3.30

52 1621658 MAIN GEAR 27.50

54 1125760 DRAG WASHER 2.20

55 1581480 DRAG WASHER 3.30

56 1581481 EAR WASHER 3.30

57 1452772 PRESSURE WASHER 2.20

58 1257782 SLEEVE 2.20

59 1144185 WASHER 0.55

60 1116237 YOKE SPRING 0.55

61 1551161 ONE WAY CLUTCH 11.00

62 1621659 GEAR SIDE PLATE 33.00

63 1452775 O-RING 2.20

64 1125827 BALL BEARING 6.60

65 1104790 RING 0.55

66 1125768 CLICK WASHER 1.10

67 1125769 CLICK SPRING 1.65

68 1452776 FRICTION WASHER 1.10

69 1125771 RUBBER WASHER 0.55

70 1452777 CLICK WASHER 2.20

71 1621627 BRAKE KNOB 16.50

72 1257016 SCREW 1.76

73 1252079 SCREW 1.76

74 1490528 LUBE PORT 2.20

75 1252078 SCREW 1.76

76 1185796 CLICK PLATE 1.65

77 1125780 CLICK SPRING 0.77

78 1117208 SPRING WASHER 0.55

79 1621660 STAR WHEEL 16.50

80 1125783 WASHER 0.55

81 1621649 PALM SIDE PLATE 27.50

82 1581488 MAG DIAL 3.30

83 1125780 CLICK SPRING 0.77

84 1415635 SLIDE CAM 3.30

85 1592979 BEARING HOUSING 16.50

86 1313372 CLICK PIN SPRING 2.20

87 1313371 CLICK PIN 2.20

88 1592980 CAM LOCK LEVER 3.30

89 1313476 SPRING 2.20

90 1415641 SLIDE CAM 3.30

91 1415533 SCREW 2.20

92 1380655 SCREW 2.20

93 1125797 WASHER 0.55

94 5230 BALL BEARING 8.80

95 1104790 RING 0.55

96 1592981 MAGNET HOLDER 2.20

97 1592982 MAGNET PLATE 2.20

98 1302674 MAGNET 4.40

99 1621661 SPOOL 66.00

100 1187620 SPOOL BALL BEARING 8.80

101 1581450 SPOOL SHAFT PIN 2.20

105 1621651 HANDLE 77.00

106 1313502 WORM SHAFT BUSHING 2.20

107 1581453 HANDLE KNOB 15.40

108 1125729 BALLBEARING 6.60

109 1281320 SCREW 1.76

110 1581454 HANDLE KNOB CAP 3.30

111 1125783 WASHER 0.55

112 1593090 HANDLE NUT 3.30

113 1621652 HANDLE NUT COVER 2.20

114 1200031 HANDLE NUT RETAINER SCREW 0.55

115 1621662 GEAR SIDE COMPLETE 44.00

116 1621654 HANDLE COMPLETE 132.00

117 1621655 PALM SIDE COMPLETE 99.00

118 1621663 SPOOL COMPLETE 71.50

* Items Marked “For Repair Use Only” Are Not Available for Individual Parts Sales

Order Flow

(STEP 1: Customer)
Please add the ordered parts from the parts list to your cart and complete the payment together with the Commission for [SHIMANO / DAIWA / ABU] Back-order Genuine Parts (US$5.00).
↓
(STEP 2: Our Shop)
We review your order details and place the order with the manufacturer.
↓
(STEP 3: Manufacturer)
Only for parts that are not in stock, we will receive a notification from the manufacturer approximately one week later.
Parts that are in stock will arrive at our shop in about one month.
* If all ordered parts are in stock, there will be no notification from the manufacturer or our shop until the shipment is dispatched. Please wait until shipping.
↓
(STEP 4: Our Shop)
Once the parts arrive from the manufacturer, we will dispatch your order.

* Please note that it generally takes about one month for genuine spare parts to arrive.
* If you order both back-ordered items and in-stock items together, they will be shipped together after all back-ordered items arrive.
* If you would like to receive in-stock items first, please place and pay for each order separately.

* The parts list pages will be expanded gradually.
If the parts list for your reel is not yet available, please place your order by manually entering the details using the order form below.

Genuine Spare Parts Order Form
https://www.hedgehog-studio.co.jp/form/parts

Regarding What You Can and Cannot Order for the Spare Parts

We source and provide genuine spare parts for SHIMANO / DAIWA / ABU reels only from the official Japanese websites listed below.
(We cannot assist with translating these websites. Please use Google Translate or other translation tools if necessary.)

| Parts that CANNOT be Ordered

- Spare parts for certain reel models (mainly older models) marked as “Unrepairable” on the SHIMANO website.

https://www.shimanofishingservice.jp/price.php

- Spare parts marked as “Just for Repair,” “Suspended,” or “Discontinued” on the DAIWA website.

http://www.sl-planets.co.jp/shop/c/

- Spare parts that do not have a part number or part code shown in the schematic diagrams on the SHIMANO / DAIWA websites.

- Spare parts marked as “For Repair Only” on the ABU website.

https://pfj-parts.com/
Please note that even for discontinued ABU reel models, parts may still be ordered if stock is available.

- Parts other than reel-related spare parts, such as rods or other fishing gear.

| Spare Spools, Bearings, and Other Tuning Parts Compatible with ROXANI Series Here!

[ABU] Genuine Spare Parts for REVO3 SX-L Product code:1265422**Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T13:37:27+09:00

ATTENTION:

- An additional US$5.00 commission will be charged.
* Please select "+US$5.00 for Genuine Parts" for the commission in STEP 2 on the order screen.

- All back-ordered items require approximately 3 to 4 weeks to be prepared for shipment.

- We do not accept order cancellations, changes, or refunds after an order is placed. (This is because SHIMANO / DAIWA / ABU JAPAN do not accept cancellations.)

- Please note that this does not guarantee that the manufacturer has the item in stock.

- If the ordered part is not available from the manufacturer and the delivery date is undetermined, the order will be canceled.

- When ordering multiple parts, if some items are unavailable, only the parts that are in stock will be prepared and supplied.

* Please make sure to read the conditions carefully before placing your order.

In-Stock Abu Garcia Genuine Parts

By clicking the banner below, you can purchase Abu Garcia genuine spare parts that are currently in stock.

Reel Part's Schematic Diagram

Schematic
Number Part Number Part Name Price
(USD)

1 1281242 FRAME 55.00

2 1125801 SLIDE WASHER 1.10

3 1125802 SLIDE WASHER 1.10

4 1125803 THUMBAR 3.30

5 1127696 THUMBAR SHAFT 1.65

6 1124746 THUMBAR SCREW 0.55

7 1281152 LINE GUIDE 5.50

8 1280905 LEVEL WIND TUBE 3.30

9 1125729 BALLBEARING 6.60

10 1280906 WORM SHAFT 16.50

11 1125732 WORM SHAFT GEAR 1.10

12 1125733 WORM SHAFT PIN 0.55

13 1280907 LINE GUIDE SHAFT 3.30

14 1125734 WORM SHAFT PIN HOLDER 0.77

15 1124224 WASHER 1.76

16 1124201 RETAINER 0.55

17 1125806 PAWL 3.30

18 1125736 WASHER 0.55

19 1129323 LINE GUIDE NUT 0.77

20 1281243 FRONT COVER 5.50

21 1125738 SCREW 0.55

22 1125739 YOKE HOLDER 1.10

23 1289971 KICK LEVER 3.30

24 1127698 LIFT CURVE 3.30

25 1200009 CLUTCH SPRING 1.76

26 1203787 KICK LEVER 3.30

27 1125744 SCREW 0.55

28 1127701 KICK LEVER SPRING 0.55

29 1281234 MAIN GEAR SHAFT (K) 13.20

30 1251634 LEVEL WIND GEAR 1.76

31 1125747 WASHER 0.55

32 1281130 MAIN GEAR SHAFT PLATE 2.20

33 1187625 SPOOL BALL BEARING 8.80

34 1124201 RETAINER 0.55

35 1185747 SCREW 1.76

36 1281235 YOKE 2.20

37 1281244 PINION (K) 11.00

38 1189341 RATCHET 1.65

39 1281133 DRAG WASHER 2.75

40 1281245 MAIN GEAR 22.00

41 1125760 DRAG WASHER 2.20

42 1125761 D-WASHER 1.65

43 1125762 EAR WASHER 1.65

44 1281135 PRESSURE WASHER 2.20

45 1281136 WASHER 1.76

46 1257782 SLEEVE 2.20

47 1116237 YOKE SPRING 0.55

48 1125766 PINION SHAFT 5.50

49 1116226 RETAINER 0.55

50 1281246 GEAR SIDE PLATE 44.00

51 1185714 O-RING 0.55

52 1125827 BALL BEARING 6.60

53 1104790 RING 0.55

54 1125768 CLICK WASHER 1.10

55 1125769 CLICK SPRING 1.65

56 1125770 FRICTION WASHER 0.55

57 1125771 RUBBER WASHER 0.55

58 1125772 CLICK WASHER 1.10

59 1281158 BRAKE KNOB 16.50

60 1281139 CAM LOCK SCREW 2.20

61 1133903 WASHER 0.55

62 1125775 SPRING 0.55

63 1125812 SCREW 0.55

64 1257013 SCREW 1.76

65 1257014 SCREW 1.76

66 1252032 LUBE PORT 1.76

67 1257016 SCREW 1.76

68 1125779 CLICK SPRING HOLDER 1.65

69 1125780 CLICK SPRING 0.77

70 1117208 SPRING WASHER 0.55

71 1281239 STAR WHEEL 22.00

72 1125783 WASHER 0.55

73 1281159 HANDLE COMPLETE 55.00

74 1281247 HANDLE NUT 2.20

75 1252035 HANDLE NUT COVER 3.30

76 1245809 SCREW 0.55

77 1281248 PALM SIDE PLATE 33.00

78 1281162 MAG DIAL 3.30

79 1281144 RUBBER WASHER 0.55

80 1125791 CLICK SPRING 1.10

81 1252039 BEARING HOUSING 16.50

82 1185732 SILDE CAM 2.20

83 1116222 MAGNET 2.20

84 1257067 MAGNET HOLDER 3.30

85 1252096 MAGNET PLATE 2.20

86 1187623 MAGNET HOLDER SPRING 1.76

87 1125797 WASHER 0.55

88 1125827 BALL BEARING 6.60

89 1104790 RING 0.55

90 1124209 SCREW 0.55

91 1281163 SPOOL 49.50

92 1187620 SPOOL BALL BEARING 8.80

93 1192826 SPOOL SHAFT PIN 2.20

99 1281164 SPOOL COMPLETE 77.00

100 1281249 PALM SIDE COMPLETE 121.00

108 1116226 RETAINER 0.55

109 1281322 HANDLE 22.00

110 1281318 HANDLE KNOB 5.50

111 1208088 BUSHING FOR BALL BEARING 2.20

112 1281319 BALL BEARING 6.60

113 1281320 SCREW 1.76

114 1281321 HANDLE KNOB CAP 2.20

* Items Marked “For Repair Use Only” Are Not Available for Individual Parts Sales

Order Flow

(STEP 1: Customer)
Please add the ordered parts from the parts list to your cart and complete the payment together with the Commission for [SHIMANO / DAIWA / ABU] Back-order Genuine Parts (US$5.00).
↓
(STEP 2: Our Shop)
We review your order details and place the order with the manufacturer.
↓
(STEP 3: Manufacturer)
Only for parts that are not in stock, we will receive a notification from the manufacturer approximately one week later.
Parts that are in stock will arrive at our shop in about one month.
* If all ordered parts are in stock, there will be no notification from the manufacturer or our shop until the shipment is dispatched. Please wait until shipping.
↓
(STEP 4: Our Shop)
Once the parts arrive from the manufacturer, we will dispatch your order.

* Please note that it generally takes about one month for genuine spare parts to arrive.
* If you order both back-ordered items and in-stock items together, they will be shipped together after all back-ordered items arrive.
* If you would like to receive in-stock items first, please place and pay for each order separately.

* The parts list pages will be expanded gradually.
If the parts list for your reel is not yet available, please place your order by manually entering the details using the order form below.

Genuine Spare Parts Order Form
https://www.hedgehog-studio.co.jp/form/parts

Regarding What You Can and Cannot Order for the Spare Parts

We source and provide genuine spare parts for SHIMANO / DAIWA / ABU reels only from the official Japanese websites listed below.
(We cannot assist with translating these websites. Please use Google Translate or other translation tools if necessary.)

| Parts that CANNOT be Ordered

- Spare parts for certain reel models (mainly older models) marked as “Unrepairable” on the SHIMANO website.

https://www.shimanofishingservice.jp/price.php

- Spare parts marked as “Just for Repair,” “Suspended,” or “Discontinued” on the DAIWA website.

http://www.sl-planets.co.jp/shop/c/

- Spare parts that do not have a part number or part code shown in the schematic diagrams on the SHIMANO / DAIWA websites.

- Spare parts marked as “For Repair Only” on the ABU website.

https://pfj-parts.com/
Please note that even for discontinued ABU reel models, parts may still be ordered if stock is available.

- Parts other than reel-related spare parts, such as rods or other fishing gear.

| Spare Spools, Bearings, and Other Tuning Parts Compatible with Revo 2015 Series Here!

[LIVRE] Torx Tool T30 *LIVHASH

HEDGEHOG STUDIO — 2026-08-20T13:33:55+09:00

Tool for removing the center nut of the handle and other parts of the LIVRE and DRT.

[ABU] Genuine Spare Parts for REVO ALC-BF7 Product code: 1400448**Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T13:32:52+09:00

ATTENTION:

- An additional US$5.00 commission will be charged.
* Please select "+US$5.00 for Genuine Parts" for the commission in STEP 2 on the order screen.

- All back-ordered items require approximately 3 to 4 weeks to be prepared for shipment.

- We do not accept order cancellations, changes, or refunds after an order is placed. (This is because SHIMANO / DAIWA / ABU JAPAN do not accept cancellations.)

- Please note that this does not guarantee that the manufacturer has the item in stock.

- If the ordered part is not available from the manufacturer and the delivery date is undetermined, the order will be canceled.

- When ordering multiple parts, if some items are unavailable, only the parts that are in stock will be prepared and supplied.

* Please make sure to read the conditions carefully before placing your order.

In-Stock Abu Garcia Genuine Parts

By clicking the banner below, you can purchase Abu Garcia genuine spare parts that are currently in stock.

Reel Part's Schematic Diagram

Schematic
Number Part Number Part Name Price
(USD)

1 1415693 FRAME 55.00

2 1415607 SLIDE WASHER 2.20

3 1415608 SLIDE WASHER 2.20

4 1415609 LINE GUIDE 5.50

6 1415610 LEVEL WIND TUBE 3.30

7 1415611 WORM SHAFT 16.50

8 1132853 BALL BEARING 6.60

9 1125732 WORM SHAFT GEAR 1.10

10 1125733 WORM SHAFT PIN 0.55

11 1415612 LINE GUIDE SHAFT 3.30

12 1415613 GUIDE PIN 3.30

13 1313359 WORM SHAFT PIN HOLDER 2.20

14 1124224 WASHER 1.76

15 1124201 RETAINER 0.55

16 1125735 PAWL 3.30

17 1125736 WASHER 0.55

18 1129323 LINE GUIDE NUT 0.77

19 1415694 FRONT COVER 5.50

20 1185747 SCREW 1.76

21 1415615 FRAME PLATE 3.30

23 1415617 KICK LEVER SPRING BUSHING 2.20

24 1415618 LIFT CURVE 3.30

25 1415619 LINK PLATE 2.20

26 1415620 SCREW 2.20

27 1289969 KICK LEVER 3.30

28 1380524 CLUTCH SPRING 2.20

29 1125745 KICK LEVER SPRING 0.55

30 1185695 WORM SHAFT WASHER 1.76

31 1415621 CLUTCH PLATE 2.20

32 1415622 SCREW 2.20

33 1380616 SCREW 2.20

34 1415623 THUM BAR 3.30

35 1252078 SCREW 1.76

36 1415624 MAIN GEAR SHAFT 13.20

37 1125747 WASHER 0.55

38 1251634 LEVEL WIND GEAR 1.76

39 1415625 MAIN GRRR SHAFT PLATE 16.50

40 1132857 BALL BEARING 6.60

41 1124201 RETAINER 0.55

42 1372152 SCREW 2.20

43 1125753 YOKE 1.10

44 1135175 PINION(7.1:1) (K) (1124755) 11.00

45 1281188 RATCHET 1.65

46 1281133 DRAG WASHER 2.75

47 1415719 MAIN GEAR 22.00

48 1281218 DRAG WASHER 2.20

49 1281219 DRAG WASHER 2.20

50 1281220 EAR WASHER 2.20

51 1281221 PRESSURE WASHER (K) 4.40

52 1415627 IAR SLEEVE 3.30

53 1144185 WASHER 0.55

54 1116237 YOKE SPRING 0.55

55 1125766 PINION SHAFT 5.50

56 1116226 RETAINER 0.55

57 1415720 GEAR SIDE PLATE 33.00

58 1275594 OWC 27.50

59 1185714 O-RING 0.55

60 1132859 BALL BEARING 6.60

61 1104790 RING 0.55

62 1125768 CLICK WASHER 1.10

63 1125769 CLICK SPRING 1.65

64 1125770 FRICTION WASHER 0.55

65 1125771 RUBBER WASHER 0.55

66 1125772 CLICK WASHER 1.10

67 1415697 BRAKE KNOB 16.50

68 1125812 SCREW 0.55

69 1257013 SCREW 1.76

70 1324390 SCREW 2.20

71 1415630 LUBE PORT 2.20

72 1252078 SCREW 1.76

73 1132925 CLICK SPRING HOLDER 1.65

74 1125780 CLICK SPRING 0.77

75 1117208 SPRING WASHER 0.55

76 1415707 STAR WHEEL 27.50

77 1125783 WASHER 0.55

78 1415632 PARM SIDE PLATE 38.50

79 1415633 MAG DIAL 3.30

80 1415634 MAG DIAL PLATE 2.20

81 1125780 CLICK SPRING 0.77

82 1415635 SLIDE CAM 3.30

83 1185710 RIGHT SIDE COVER CAP SCREW 0.55

84 1125771 RUBBER WASHER 0.55

85 1415636 BEARING HOUSING 16.50

86 1313372 CLICK PIN SPRING 2.20

87 1313371 CLICK PIN 2.20

88 1415637 CAM LOCK LEVER 3.30

89 1415638 MAGNET HOLDER 3.30

90 1415639 MAGNET PLATE 2.20

91 1415640 MAGNET PLATE 2.20

92 1116222 MAGNET 2.20

92 1302674 MAGNET 4.40

93 1313476 SPRING 2.20

94 1415641 SLIDE CAM 3.30

95 1380655 SCREW 2.20

96 1124209 SCREW 0.55

97 1125797 WASHER 0.55

98 5230 BALL BEARING 8.80

99 1104790 RING 0.55

100 1415721 SPOOL 60.50

101 1187620 SPOOL BALL BEARING 8.80

102 1192826 SPOOL SHAFT PIN 2.20

103 1415643 SPOOL PLATE 3.30

108 1415644 HANDLE 77.00

109 1208088 BUSHING FOR BALL BEARING 2.20

110 1415722 HANDLE KNOB 16.50

111 1144186 BALL BEARING 6.60

112 1281320 SCREW 1.76

113 1281328 HANDLE KNOB CAP 6.60

114 1185798 HANDLE WASHER 0.55

115 1214326 HANDLE NUT 2.20

116 1415701 HANDLE NUT COVER 2.20

117 1200031 HANDLE NUT RETAINER SCREW 0.55

118 1415723 GEAR SIDE COMPLETE 49.50

119 1415724 HANDLE COMPLETE 132.00

120 1415650 PARM SIDE COMPLETE 121.00

121 1415725 SPOOL COMPLETE 77.00

123 1415653 SPARE HANDLE NUT COVER 2.20

124 1415654 SPARE HANDLE NUT COVER 2.20

125 1415655 SPARE HANDLE NUT COVER 2.20

126 1415656 SPARE HANDLE NUT COVER 2.20

* Items Marked “For Repair Use Only” Are Not Available for Individual Parts Sales

Order Flow

(STEP 1: Customer)
Please add the ordered parts from the parts list to your cart and complete the payment together with the Commission for [SHIMANO / DAIWA / ABU] Back-order Genuine Parts (US$5.00).
↓
(STEP 2: Our Shop)
We review your order details and place the order with the manufacturer.
↓
(STEP 3: Manufacturer)
Only for parts that are not in stock, we will receive a notification from the manufacturer approximately one week later.
Parts that are in stock will arrive at our shop in about one month.
* If all ordered parts are in stock, there will be no notification from the manufacturer or our shop until the shipment is dispatched. Please wait until shipping.
↓
(STEP 4: Our Shop)
Once the parts arrive from the manufacturer, we will dispatch your order.

* Please note that it generally takes about one month for genuine spare parts to arrive.
* If you order both back-ordered items and in-stock items together, they will be shipped together after all back-ordered items arrive.
* If you would like to receive in-stock items first, please place and pay for each order separately.

* The parts list pages will be expanded gradually.
If the parts list for your reel is not yet available, please place your order by manually entering the details using the order form below.

Genuine Spare Parts Order Form
https://www.hedgehog-studio.co.jp/form/parts

Regarding What You Can and Cannot Order for the Spare Parts

We source and provide genuine spare parts for SHIMANO / DAIWA / ABU reels only from the official Japanese websites listed below.
(We cannot assist with translating these websites. Please use Google Translate or other translation tools if necessary.)

| Parts that CANNOT be Ordered

- Spare parts for certain reel models (mainly older models) marked as “Unrepairable” on the SHIMANO website.

https://www.shimanofishingservice.jp/price.php

- Spare parts marked as “Just for Repair,” “Suspended,” or “Discontinued” on the DAIWA website.

http://www.sl-planets.co.jp/shop/c/

- Spare parts that do not have a part number or part code shown in the schematic diagrams on the SHIMANO / DAIWA websites.

- Spare parts marked as “For Repair Only” on the ABU website.

https://pfj-parts.com/
Please note that even for discontinued ABU reel models, parts may still be ordered if stock is available.

- Parts other than reel-related spare parts, such as rods or other fishing gear.

| Spare Spools, Bearings, and Other Tuning Parts Compatible with Revo 2017Series Here!

[ABU] Genuine Spare Parts for REVO ELITE IB HS-L Product code:1239474 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T13:12:14+09:00

ATTENTION:

- An additional US$5.00 commission will be charged.
* Please select "+US$5.00 for Genuine Parts" for the commission in STEP 2 on the order screen.

- All back-ordered items require approximately 3 to 4 weeks to be prepared for shipment.

- We do not accept order cancellations, changes, or refunds after an order is placed. (This is because SHIMANO / DAIWA / ABU JAPAN do not accept cancellations.)

- Please note that this does not guarantee that the manufacturer has the item in stock.

- If the ordered part is not available from the manufacturer and the delivery date is undetermined, the order will be canceled.

- When ordering multiple parts, if some items are unavailable, only the parts that are in stock will be prepared and supplied.

* Please make sure to read the conditions carefully before placing your order.

In-Stock Abu Garcia Genuine Parts

By clicking the banner below, you can purchase Abu Garcia genuine spare parts that are currently in stock.

Reel Part's Schematic Diagram

Schematic
Number Part Number Part Name Price
(USD)

1 1214318 FRAME (K) 44.00

2 1125801 SLIDE WASHER 1.10

3 1125802 SLIDE WASHER 1.10

4 1251631 THUMBAR 3.30

5 1127696 THUMBAR SHAFT 1.65

6 1124746 THUMBAR SCREW 0.55

7 1125804 LINE GUIDE 5.50

8 1137750 LEVEL WIND TUBE 3.30

9 1132853 BALL BEARING 6.60

11 1132903 WORM SHAFT 16.50

12 1125732 WORM SHAFT GEAR 1.10

13 1125733 WORM SHAFT PIN 0.55

14 1125734 WORM SHAFT PIN HOLDER 0.77

15 1124178 WASHER 0.55

16 1124201 RETAINER 0.55

17 1125735 PAWL 3.30

18 1125736 WASHER 0.55

19 1129323 LINE GUIDE NUT 0.77

20 1252782 TI-COATED FRONT COVER (K) 5.50

21 1125738 SCREW 0.55

22 1125739 YOKE HOLDER 1.10

23 1156750 KICK LEVER 1.65

24 1127698 LIFT CURVE 3.30

25 1127699 CLUTCH SPRING 0.55

26 1203787 CLUTCH PLATE 3.30

27 1125744 SCREW 0.55

28 1127701 KICK LEVER SPRING 0.55

29 1196827 MAIN GEAR SHAFT 13.20

30 1125747 WASHER 0.55

31 1125748 LEVEL WIND GEAR 1.10

32 1125749 WASHER 0.55

33 1125750 MAINGEAR SHAFT PLATE 2.20

34 1124201 RETAINER 0.55

35 1132857 BALL BEARING 6.60

36 1125752 SCREW 0.55

37 1127703 YOKE 1.10

38 1192815 PINION GEAR-L(7.1:1) 11.00

39 1189341 RATCHET 1.65

40 1125757 DRAG WASHER 2.20

41 1200013 MAIN GEAR (K) 22.00

42 1125760 DRAG WASHER 2.20

43 1125761 D-WASHER 1.65

44 1125762 EAR WASHER 1.65

45 1125763 PRESURE WASHER 1.65

46 1132916 IAR SLEEVE 2.20

48 1116237 YOKE SPRING 0.55

49 1125766 PINION SHAFT 5.50

50 1116226 RETAINER 0.55

51 1214321 RIGHT SIDE PLATE 49.50

52 1185714 O-RING 0.55

53 1128194 BALLBEARING 8.80

54 1104790 RING 0.55

55 1125768 CLICK WASHER 1.10

56 1125769 CLICK SPRING 1.65

57 1125770 FRICTION WASHER 0.55

58 1125771 RUBBER WASHER 0.55

59 1125772 CLICK WASHER 1.10

60 1245813 BRAKE KNOB 16.50

61 1132922 CAMLOCK SCREW 2.20

63 1125775 SPRING 0.55

64 1125776 SCREW 0.55

65 1125777 SCREW 0.55

66 1125778 SCREW 0.55

67 1132925 CLICK SPRING HOLDER 1.65

68 1125780 CLICK SPRING 0.77

69 1117208 SPRING WASHER 0.55

70 1245815 STAR WHEEL(7.1:1) 22.00

71 1185798 HANDLE WASHER 0.55

72 1245816 HANDLE 110.00

73 1214327 HANDLE NUT 2.20

74 1245817 HANDLE NUT COVER 1.65

75 1203407 SCREW 0.55

76 1245818 SPOOL (K) 38.50

77 1214331 LEFT SIDE PLATE 38.50

78 1132933 MAG DIAL 3.30

79 1125791 CLICK SPRING 1.10

80 1196767 BEARING HOUSING 16.50

81 1125793 MAGNET PLATE 2.20

82 1116222 MAGNET 2.20

83 1196768 MAGNET HOLDER 2.20

84 1124209 SCREW 0.55

85 1196769 SCREW 0.55

86 1125796 SCREW 0.55

87 1125797 WASHER 0.55

88 1128194 BALLBEARING 8.80

89 1104790 RING 0.55

90 1196770 MAGNET PLATE 2.20

91 1125799 LINE GUIDE SHAFT 1.65

95 1133903 WASHER 0.55

96 1144215 BALL BEARING 8.80

97 1192826 SPOOL SHAFT PIN 2.20

98 1188218 BRAKE WEIGHT HOLDER 3.30

99 1187892 BRAKE SHOE SPRING 0.55

100 1188219 BRAKE WEIGHT 1.10

101 1196771 MAGNET PLATE　 3.30

102 1187891 SCREW 0.55

103 1245819 SPOOL COMPLETE (K) 55.00

104 1214335 L/S COVER 119.90

* Items Marked “For Repair Use Only” Are Not Available for Individual Parts Sales

Order Flow

(STEP 1: Customer)
Please add the ordered parts from the parts list to your cart and complete the payment together with the Commission for [SHIMANO / DAIWA / ABU] Back-order Genuine Parts (US$5.00).
↓
(STEP 2: Our Shop)
We review your order details and place the order with the manufacturer.
↓
(STEP 3: Manufacturer)
Only for parts that are not in stock, we will receive a notification from the manufacturer approximately one week later.
Parts that are in stock will arrive at our shop in about one month.
* If all ordered parts are in stock, there will be no notification from the manufacturer or our shop until the shipment is dispatched. Please wait until shipping.
↓
(STEP 4: Our Shop)
Once the parts arrive from the manufacturer, we will dispatch your order.

* Please note that it generally takes about one month for genuine spare parts to arrive.
* If you order both back-ordered items and in-stock items together, they will be shipped together after all back-ordered items arrive.
* If you would like to receive in-stock items first, please place and pay for each order separately.

* The parts list pages will be expanded gradually.
If the parts list for your reel is not yet available, please place your order by manually entering the details using the order form below.

Genuine Spare Parts Order Form
https://www.hedgehog-studio.co.jp/form/parts

Regarding What You Can and Cannot Order for the Spare Parts

We source and provide genuine spare parts for SHIMANO / DAIWA / ABU reels only from the official Japanese websites listed below.
(We cannot assist with translating these websites. Please use Google Translate or other translation tools if necessary.)

| Parts that CANNOT be Ordered

- Spare parts for certain reel models (mainly older models) marked as “Unrepairable” on the SHIMANO website.

https://www.shimanofishingservice.jp/price.php

- Spare parts marked as “Just for Repair,” “Suspended,” or “Discontinued” on the DAIWA website.

http://www.sl-planets.co.jp/shop/c/

- Spare parts that do not have a part number or part code shown in the schematic diagrams on the SHIMANO / DAIWA websites.

- Spare parts marked as “For Repair Only” on the ABU website.

https://pfj-parts.com/
Please note that even for discontinued ABU reel models, parts may still be ordered if stock is available.

- Parts other than reel-related spare parts, such as rods or other fishing gear.

| Spare Spools, Bearings, and Other Tuning Parts Compatible with Revo Early Series Here!

[ABU] Genuine Spare Parts for ROXANI BF8-L Product code: 1487514 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T13:08:51+09:00

ATTENTION:

- An additional US$5.00 commission will be charged.
* Please select "+US$5.00 for Genuine Parts" for the commission in STEP 2 on the order screen.

- All back-ordered items require approximately 3 to 4 weeks to be prepared for shipment.

- We do not accept order cancellations, changes, or refunds after an order is placed. (This is because SHIMANO / DAIWA / ABU JAPAN do not accept cancellations.)

- Please note that this does not guarantee that the manufacturer has the item in stock.

- If the ordered part is not available from the manufacturer and the delivery date is undetermined, the order will be canceled.

- When ordering multiple parts, if some items are unavailable, only the parts that are in stock will be prepared and supplied.

* Please make sure to read the conditions carefully before placing your order.

In-Stock Abu Garcia Genuine Parts

By clicking the banner below, you can purchase Abu Garcia genuine spare parts that are currently in stock.

Reel Part's Schematic Diagram

Schematic
Number Part Number Part Name Price
(USD)

1 1490557 FRAME 55.00

2 1490482 SLIDE WASHER RIGHT 2.20

3 1490483 SLIDE WASHER LEFT 2.20

4 1490484 LINE GUIDE 5.50

5 1137750 LEVEL WIND TUBE 3.30

6 1125805 WORM SHAFT 16.50

7 1313502 WORM SHAFT BUSHING 2.20

8 1125732 WORM SHAFT GEAR 1.10

9 1125733 WORM SHAFT PIN 0.55

10 1490485 LINE GUIDE SHAFT 3.30

11 1313359 WORM SHAFT PIN HOLDER 2.20

12 1185695 WORM SHAFT WASHER 1.76

13 1124201 RETAINER 0.55

14 1125806 PAWL 3.30

15 1116193 WASHER 0.55

16 1129323 LINE GUIDE NUT 0.77

17 1490558 FRONT COVER 5.50

18 1452764 SCREW 2.20

19 1415616 BUSHING 2.20

20 1490487 BUSHING 2.20

21 1490540 CLUTCH CAM 3.30

22 1415619 LINK PLATE 2.20

23 1415620 SCREW 2.20

24 1289971 KICK LEVER 3.30

25 1380547 CLUTCH SPRING 2.20

26 1490541 KICK LEVER SPRING 2.20

27 1415661 CLUTCH PLATE 2.20

28 1415622 SCREW 2.20

29 1380616 SCREW 2.20

30 1490490 THUMB BAR 3.30

31 1252078 SCREW 1.76

32 1490542 MAIN GEAR SHAFT 13.20

33 1251634 LEVEL WIND GEAR 1.76

34 1380530 WASHER 2.20

35 1490492 MAIN GEAR SHAFT PLATE 2.20

36 1490493 WASHER 2.20

37 1116186 BALL BEARING 6.60

38 1124201 RETAINER 0.55

39 1372152 SCREW 2.20

40 1127703 YOKE 1.10

41 1116237 YOKE SPRING 0.55

42 1144195 RATCHET 1.65

43 1281133 DRAG WASHER 2.75

44 1144194 STOPPER 9.90

45 1490552 MAIN GEAR 22.00

46 1490553 PINION 11.00

48 1190698 DRAG WASHER 1.76

50 1144201 PRESSURE WASHER 1.65

51 1185755 WASHER 2.20

52 1257782 SLEEVE 2.20

53 1185778 DRAG SPACER 0.55

54 1490559 GEAR SIDE PLATE 33.00

55 1275594 OWC 27.50

56 1185714 O-RING 0.55

57 1490497 BALL BEARING 27.50

58 1104790 RING 0.55

59 1125768 CLICK WASHER 1.10

60 1490498 BRAKE KNOB 16.50

61 1452777 CLICK WASHER 2.20

62 1125771 RUBBER WASHER 0.55

63 1125770 FRICTION WASHER 0.55

64 1125769 CLICK SPRING 1.65

65 1452779 SCREW 2.20

66 1257013 SCREW 1.76

67 1490528 LUBE PORT 2.20

68 1252078 SCREW 1.76

69 1185796 CLICK PLATE 1.65

70 1125780 CLICK SPRING 0.77

71 1117208 SPRING WASHER 0.55

72 1490560 STAR WHEEL 27.50

73 1125783 WASHER 0.55

74 1490546 PALM SIDE PLATE 38.50

75 1490531 MAG DIAL 3.30

76 1415634 MAG DIAL PLATE 2.20

77 1125780 CLICK SPRING 0.77

78 1415635 SLIDE CAM 3.30

79 1185710 RIGHT SIDE COVER CAP SCREW 0.55

80 1125771 RUBBER WASHER 0.55

81 1490532 BEARING HOUSING 16.50

82 1313372 CLICK PIN SPRING 2.20

83 1313371 CLICK PIN 2.20

84 1490547 CAM LOCK LEVER 3.30

85 1313476 SPRING 2.20

86 1415641 SLIDE CAM 3.30

87 1380655 SCREW 2.20

88 1490505 MAGNET HOLDER 5.50

89 1490506 MAGNET PLATE 5.50

90 1302674 MAGNET 4.40

91 1415533 SCREW 2.20

92 1125797 WASHER 0.55

93 5230 BALL BEARING 8.80

94 1104790 RING 0.55

95 1490533 SPOOL 49.50

96 1144215 BALL BEARING 8.80

97 1187619 SPOOL SHAFT PIN 2.20

99 1490534 SPOOL PLATE 8.80

104 1490511 HANDLE 77.00

105 1208088 BUSHING FOR BALL BEARING 2.20

106 1362777 HANDLE KNOB 5.50

107 1208088 BUSHING FOR BALL BEARING 2.20

108 1208090 SCREW 0.55

109 1380579 HANDLE KNOB CAP 2.20

110 1185798 HANDLE WASHER 0.55

111 1214327 HANDLE NUT 2.20

112 1490512 HANDLE NUT COVER 2.20

113 1203407 SCREW 0.55

117 1490561 GEAR SIDE COMPLETE 49.50

118 1490514 HANDLE COMPLETE 88.00

119 1490562 PALM SIDE COMPLETE 154.00

120 1490537 SPOOL COMPLETE 58.30

121 1490550 HOOK HOLDER 3.30

122 1490551 TORSION SPRING 2.20

123 1490518 COLLAR-H 2.20

124 1380699 SCREW 2.20

* Items Marked “For Repair Use Only” Are Not Available for Individual Parts Sales

Order Flow

(STEP 1: Customer)
Please add the ordered parts from the parts list to your cart and complete the payment together with the Commission for [SHIMANO / DAIWA / ABU] Back-order Genuine Parts (US$5.00).
↓
(STEP 2: Our Shop)
We review your order details and place the order with the manufacturer.
↓
(STEP 3: Manufacturer)
Only for parts that are not in stock, we will receive a notification from the manufacturer approximately one week later.
Parts that are in stock will arrive at our shop in about one month.
* If all ordered parts are in stock, there will be no notification from the manufacturer or our shop until the shipment is dispatched. Please wait until shipping.
↓
(STEP 4: Our Shop)
Once the parts arrive from the manufacturer, we will dispatch your order.

* Please note that it generally takes about one month for genuine spare parts to arrive.
* If you order both back-ordered items and in-stock items together, they will be shipped together after all back-ordered items arrive.
* If you would like to receive in-stock items first, please place and pay for each order separately.

* The parts list pages will be expanded gradually.
If the parts list for your reel is not yet available, please place your order by manually entering the details using the order form below.

Genuine Spare Parts Order Form
https://www.hedgehog-studio.co.jp/form/parts

Regarding What You Can and Cannot Order for the Spare Parts

We source and provide genuine spare parts for SHIMANO / DAIWA / ABU reels only from the official Japanese websites listed below.
(We cannot assist with translating these websites. Please use Google Translate or other translation tools if necessary.)

| Parts that CANNOT be Ordered

- Spare parts for certain reel models (mainly older models) marked as “Unrepairable” on the SHIMANO website.

https://www.shimanofishingservice.jp/price.php

- Spare parts marked as “Just for Repair,” “Suspended,” or “Discontinued” on the DAIWA website.

http://www.sl-planets.co.jp/shop/c/

- Spare parts that do not have a part number or part code shown in the schematic diagrams on the SHIMANO / DAIWA websites.

- Spare parts marked as “For Repair Only” on the ABU website.

https://pfj-parts.com/
Please note that even for discontinued ABU reel models, parts may still be ordered if stock is available.

- Parts other than reel-related spare parts, such as rods or other fishing gear.

| Spare Spools, Bearings, and Other Tuning Parts Compatible with ROXANI Series Here!

[ABU] Genuine Spare Parts for ROXANI POWERSHOOTER-L Product code: 1487510 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T13:00:42+09:00

ATTENTION:

- An additional US$5.00 commission will be charged.
* Please select "+US$5.00 for Genuine Parts" for the commission in STEP 2 on the order screen.

- All back-ordered items require approximately 3 to 4 weeks to be prepared for shipment.

- We do not accept order cancellations, changes, or refunds after an order is placed. (This is because SHIMANO / DAIWA / ABU JAPAN do not accept cancellations.)

- Please note that this does not guarantee that the manufacturer has the item in stock.

- If the ordered part is not available from the manufacturer and the delivery date is undetermined, the order will be canceled.

- When ordering multiple parts, if some items are unavailable, only the parts that are in stock will be prepared and supplied.

* Please make sure to read the conditions carefully before placing your order.

In-Stock Abu Garcia Genuine Parts

By clicking the banner below, you can purchase Abu Garcia genuine spare parts that are currently in stock.

Reel Part's Schematic Diagram

Schematic
Number Part Number Part Name Price
(USD)

1 1495892 FRAME 55.00

2 1490482 SLIDE WASHER RIGHT 2.20

3 1490483 SLIDE WASHER LEFT 2.20

4 1490484 LINE GUIDE 5.50

5 1137750 LEVEL WIND TUBE 3.30

6 1125805 WORM SHAFT 16.50

7 1313502 WORM SHAFT BUSHING 2.20

8 1125732 WORM SHAFT GEAR 1.10

9 1125733 WORM SHAFT PIN 0.55

10 1490485 LINE GUIDE SHAFT 3.30

11 1313359 WORM SHAFT PIN HOLDER 2.20

12 1185695 WORM SHAFT WASHER 1.76

13 1124201 RETAINER 0.55

14 1125806 PAWL 3.30

15 1116193 WASHER 0.55

16 1129323 LINE GUIDE NUT 0.77

17 1490539 FRONT COVER 5.50

18 1452764 SCREW 2.20

19 1415616 BUSHING 2.20

21 1490540 CLUTCH CAM 3.30

22 1415619 LINK PLATE 2.20

23 1415620 SCREW 2.20

24 1289971 KICK LEVER 3.30

25 1380547 CLUTCH SPRING 2.20

26 1490541 KICK LEVER SPRING 2.20

27 1415661 CLUTCH PLATE 2.20

28 1415622 SCREW 2.20

29 1380616 SCREW 2.20

30 1490490 THUMB BAR 3.30

31 1252078 SCREW 1.76

32 1415576 MAIN GEAR SHAFT 11.00

33 1251634 LEVEL WIND GEAR 1.76

34 1380530 WASHER 2.20

35 1490492 MAIN GEAR SHAFT PLATE 2.20

36 1490493 WASHER 2.20

37 1116186 BALL BEARING 6.60

38 1124201 RETAINER 0.55

39 1372152 SCREW 2.20

40 1127703 YOKE 1.10

41 1116237 YOKE SPRING 0.55

42 1144195 RATCHET 1.65

43 1281133 DRAG WASHER 2.75

44 1144194 STOPPER 9.90

45 1308895 MAIN GEAR (K) 22.00

46 1490553 PINION 11.00

47 1281218 DRAG WASHER 2.20

48 1281219 DRAG WASHER 2.20

49 1495893 EAR WASHER 2.20

50 1125763 PRESURE WASHER 1.65

51 1185755 WASHER 2.20

52 1257782 SLEEVE 2.20

53 1185778 DRAG SPACER 0.55

54 1495894 GEAR SIDE PLATE 33.00

55 1275594 OWC 27.50

56 1185714 O-RING 0.55

57 1490497 BALL BEARING 27.50

58 1104790 RING 0.55

60 1495882 BRAKE KNOB 16.50

61 1452777 CLICK WASHER 2.20

62 1125771 RUBBER WASHER 0.55

63 1125770 FRICTION WASHER 0.55

65 1452779 SCREW 2.20

66 1257013 SCREW 1.76

67 1490499 LUBE PORT 2.20

68 1252078 SCREW 1.76

69 1185796 CLICK PLATE 1.65

70 1125780 CLICK SPRING 0.77

71 1117208 SPRING WASHER 0.55

72 1495895 STAR WHEEL 27.50

73 1125783 WASHER 0.55

74 1495896 PALM SIDE PLATE 38.50

75 1490502 MAG DIAL 3.30

76 1415634 MAG DIAL PLATE 2.20

77 1125780 CLICK SPRING 0.77

78 1415635 SLIDE CAM 3.30

79 1185710 RIGHT SIDE COVER CAP SCREW 0.55

80 1125771 RUBBER WASHER 0.55

81 1495884 BEARING HOUSING 16.50

82 1313372 CLICK PIN SPRING 2.20

83 1313371 CLICK PIN 2.20

84 1490547 CAM LOCK LEVER 3.30

85 1313476 SPRING 2.20

86 1415641 SLIDE CAM 3.30

87 1380655 SCREW 2.20

88 1490505 MAGNET HOLDER 5.50

89 1490506 MAGNET PLATE 5.50

90 1302674 MAGNET 4.40

91 1415533 SCREW 2.20

92 1125797 WASHER 0.55

93 5230 BALL BEARING 8.80

94 1104790 RING 0.55

95 1495885 SPOOL 49.50

96 1281216 BALL BEARING 6.60

97 1187619 SPOOL SHAFT PIN 2.20

98 1490508 BRAKE WEIGHT HOLDER 3.30

99 1187888 BRAKE SHOE 0.55

100 1490509 BRAKE WEIGHT 2.20

101 1187892 BRAKE SHOE SPRING 0.55

102 1495886 MAGNET PLATE 3.30

103 1185710 RIGHT SIDE COVER CAP SCREW 0.55

104 1308857 HANDLE 22.00

105 1208088 BUSHING FOR BALL BEARING 2.20

106 1495887 HANDLE KNOB 8.80

107 1208088 BUSHING FOR BALL BEARING 2.20

108 1208090 SCREW 0.55

109 1308850 HANDLE KNOB CAP 6.60

111 1203418 HANDLE NUT 2.20

112 1252035 HANDLE NUT COVER 3.30

113 1132930 BSC除く）SCREW 2.20

117 1495897 GEAR SIDE COMPLETE 49.50

118 1495889 HANDLE COMPLETE 77.00

119 1495898 PALM SIDE COMPLETE 154.00

120 1495891 SPOOL COMPLETE 71.50

121 1490550 HOOK HOLDER 3.30

122 1490518 COLLAR-H 2.20

123 1490551 TORSION SPRING 2.20

124 1380699 SCREW 2.20

* Items Marked “For Repair Use Only” Are Not Available for Individual Parts Sales

Order Flow

(STEP 1: Customer)
Please add the ordered parts from the parts list to your cart and complete the payment together with the Commission for [SHIMANO / DAIWA / ABU] Back-order Genuine Parts (US$5.00).
↓
(STEP 2: Our Shop)
We review your order details and place the order with the manufacturer.
↓
(STEP 3: Manufacturer)
Only for parts that are not in stock, we will receive a notification from the manufacturer approximately one week later.
Parts that are in stock will arrive at our shop in about one month.
* If all ordered parts are in stock, there will be no notification from the manufacturer or our shop until the shipment is dispatched. Please wait until shipping.
↓
(STEP 4: Our Shop)
Once the parts arrive from the manufacturer, we will dispatch your order.

* Please note that it generally takes about one month for genuine spare parts to arrive.
* If you order both back-ordered items and in-stock items together, they will be shipped together after all back-ordered items arrive.
* If you would like to receive in-stock items first, please place and pay for each order separately.

* The parts list pages will be expanded gradually.
If the parts list for your reel is not yet available, please place your order by manually entering the details using the order form below.

Genuine Spare Parts Order Form
https://www.hedgehog-studio.co.jp/form/parts

Regarding What You Can and Cannot Order for the Spare Parts

We source and provide genuine spare parts for SHIMANO / DAIWA / ABU reels only from the official Japanese websites listed below.
(We cannot assist with translating these websites. Please use Google Translate or other translation tools if necessary.)

| Parts that CANNOT be Ordered

- Spare parts for certain reel models (mainly older models) marked as “Unrepairable” on the SHIMANO website.

https://www.shimanofishingservice.jp/price.php

- Spare parts marked as “Just for Repair,” “Suspended,” or “Discontinued” on the DAIWA website.

http://www.sl-planets.co.jp/shop/c/

- Spare parts that do not have a part number or part code shown in the schematic diagrams on the SHIMANO / DAIWA websites.

- Spare parts marked as “For Repair Only” on the ABU website.

https://pfj-parts.com/
Please note that even for discontinued ABU reel models, parts may still be ordered if stock is available.

- Parts other than reel-related spare parts, such as rods or other fishing gear.

| Spare Spools, Bearings, and Other Tuning Parts Compatible with ROXANI Series Here!

[SHIMANO] Genuine Spare Parts for 21 ULTEGRA C5000XG Product Code: 043375 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T11:51:53+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship this item after you order unless we have in stock at the time of your order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.102 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/4959

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10DYK DRAG KNOB ASSEMBLY 11.55

3 10B8N STOPPER SPRING 1.65

4 10QBT OVAL WASHER 1.65

6 102XU EAR WASHERS 1.65

7 10BCE OVAL WASHER 1.65

8 101VN SPOOL PIN 1.10

9 101L6 SPOOL PIN SPRING 1.10

10 10PH5 FIXING BOLT 1.65

11 10BXN SPOOL WASHER SET 1.10

12 103MU SPOOL HOLDER (A) 1.65

13 10J04 SPOOL HOLDER (B) 1.65

14 103GW FIXING BOLT 1.65

15 1076N RETAINER 2.75

16 10DY6 ROTOR BEARING SEAL 1.65

17 101VM ROTOR NUT 2.75

18 10270 ROTOR FLANGE 2.75

19 101H6 FIXING BOLT 1.65

20 10SJN BALANCER 2.75

21 101L1 ROTOR 8.25

22 10RSH BALE MOUNTING COVER 6.05

23 10PS7 FIXING BOLT 1.10

24 10RS3 BALANCER 2.75

25 103KS FIXING BOLT 1.10

26 10RSD ARM CAM SPRING COVER 3.85

27 10HE7 CLICK SPRING 1.65

28 106ZC CLICK PIN 1.65

29 1027J ARM CAM 2.20

30 10DN9 FIXING BOLT 1.65

31 10K90 FIXING BOLT 1.10

32 10E44 LINE ROLLER COLLAR 2.75

33 104VX BALL BEARING (4X7X2.5) 13.75

34 1009K LINE ROLLER BUSH 1.65

35 1009E O-RING 1.65

36 1009A LINE ROLLER 6.05

37 10RFZ LINE ROLLER SPACER 1.65

38 10TJM LINE ROLLER BEARING COLLAR 2.75

39 101G2 BAIL ASSEMBLY 16.50

40 10TPC ARM FIXING SHAFT 6.05

41 10PS5 FIXING BOLT 1.65

42 10DY7 INNER GERI LEVER 2.75

43 1009B ARM SPRING GUIDE (A) COLLAR BUSH 1.65

44 10SAN ARM SPRING GUIDE (A) 3.85

45 101D9 ARM SPRING GUIDE (A) COLLAR 1.65

46 10RC7 ARM CAM SPRING 1.65

47 107AB ARM CAM SPRING SEAT 2.75

48 101D5 ROTOR COLLAR 9.35

49 10QXQ FRICTION RING 2.75

50 100WT FIXING BOLT 1.65

51 10S2L ROLLER CLUTCH ASSEMBLY 12.65

52 1009Z O-RING 1.65

53 1009Y ROLLER CLUTCH INNER 3.85

54 100WY FIXING BOLT 1.65

55 10DWD BEARING PUSH PLATE 1.65

56 10E7A BALL BEARING (7X14X5) 7.15

58 10E37 WASHER 1.65

59 10GD9 WASHER 1.65

60 10K5Y BALL BEARING (6X10X3) 8.25

61 1009W LID FLANGE SEAL 2.75

62 10LZ4 FIXING BOLT 1.10

63 10DYJ INTERMEDIATE GEAR SHAFT 3.85

64 10DYF SLIDER GUIDE (A) 1.65

65 10DWX FIXING BOLT 1.65

66 108WH O-RING 1.65

67 10RSK HANDLE SCREW CAP 3.85

68 10DNC FIXING BOLT 1.65

69 101L5 BODY 11.00

70 10DYB WORM SHAFT 6.05

71 10ECK WASHER 1.10

72 10K9C WASHER 1.10

73 1009C WORM SHAFT BUSHING 1.65

74 10S7C WORM SHAFT COVER 1.65

75 10QG5 FIXING BOLT 1.10

76 101E2 BODY GUARD 6.05

77 10PRZ FIXING BOLT 1.65

78 101PR MAIN SHAFT ASSEMBLY 5.50

79 106VJ WORM SHAFT PIN 3.85

80 10RKQ WASHER 2.20

81 100WX O-RING 1.65

82 1010C WORM SHAFT PIN COLLAR 1.65

83 1010D WORM SHAFT PIN PUSH PLATE 1.65

84 10LCT FIXING BOLT 1.65

85 10074 WORM SHAFT GEAR 9.35

86 1009G WORM SHAFT BUSHING 1.65

87 10SM7 INTERMEDIATE GEAR (S) 8.25

88 10G6D WASHER 1.65

89 10TBA WASHER 1.65

91 107FA BALL BEARING (7X11X3) 7.15

93 100UL FIXING BOLT 1.65

94 100F9 BEARING PUSH PLATE 1.65

95 107AT BALL BEARING (7X13X4) 7.15

96 101AY BEARING WASHER 2.20

98 10M2L FIXING BOLT 1.10

99 1017Y INNER GERI CONTACT 1.65

101 10PXV HANDLE SHAFT SEAL 2.75

102 101G1 HANDLE SHANK ASSEMBLY 22.00

103 10PXZ HANDLE KNOB BUSHING 1.65

105 104FH WASHER 2.20

106 10LFA FIXING BOLT 1.10

108 10K96 WASHER 1.65

109 10KFA ADJUSTMENT WASHER 1.10

112 10TCZ PINION GEAR 13.20

113 1006V INTERMEDIATE GEAR (L) 9.35

114 100Y1 DRIVE GEAR 17.05

121 1027H SPOOL ASSEMBLY 50.60

122 10E66 DRAG WASHER (A) 6.05

123 10QVA COVER ASSEMBLY 13.20

124 101L4 HANDLE ASSEMBLY 44.00

125 10QUU HANDLE KNOB ASSEMBLY 22.55

126 1027G HANDLE CAP 6.60

127 10E6E DRAG WASHER (B) 6.05

128 10LAA O-RING 1.10

131 10SY6 HANDLE SHAFT FLANGE ASSEMBLY 6.05

132 10E5X HANDLE WASHER 1.65

136 10JDE SLIDER WASHER (7X10X0.3) 1.10

ITOS 10G4L SPOOL THREAD STOPPER SEAL (ACCESSORY) 1.65

MH01 13NBQ NAMEPLATE ON THE BACK OF THE LEG 1.10

PUNT 13FML INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORY) 2.75

[SHIMANO] Genuine Spare Parts for 21 ENGETSU 100PG Product code: 043009 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T11:39:28+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.102 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/4960

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "38 / Roller Clutch", they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 101VV FIXING BOLT 1.10

2 1017T RETAINER 3.85

3 13V31 HANDLE FIXING NUT 2.75

4 13XY5 HANDLE CAP 4.95

5 10LAA O-RING 1.10

6 10LFA FIXING BOLT 1.10

7 104VX BALL BEARING (4 X 7 X 2.5) 13.75

8 104FH WASHER 2.20

9 10S9X WASHER 1.65

10 13E89 HANDLE KNOB 34.10

11 10PXZ HANDLE KNOB BUSH 1.65

12 13HVC HANDLE 34.10

13 10KXW STAR DRAG SOUND OUTPUT BOARD REMOVAL STOP 1.65

14 10J26 STAR DRAG SOUND BOARD 1.65

15 10MFC CLICK PIN 1.65

16 10BT2 CLICK SPRING 1.65

17 13UYQ STAR DRAG 11.55

18 10A70 STAR DRAG SPRING 2.75

19 10A3T STAR DRAG FIXING NUT 3.85

20 10J1N STAR DRAG SPACER 1.65

21 109F5 DRIVE GEAR WASHER 1.65

22 100SE WASHER 1.10

23 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

24 13UD5 LOCK RING 2.75

25 13B6Z WASHER 1.65

26 13UEH FALL LEVER 8.80

27 13UD3 LOCK SPACER B 1.65

28 13U8V MECHANICAL BRAKE KNOB 9.90

29 10EX5 SPOOL SHAFT BEARING TARI B 1.10

30 1054D BEARING PULL-OUT STOPPER 1.10

31 101V3 BEARING SPACER 2.75

32 105BP BALL BEARING (5X9X3) 13.75

33 10R22 O-RING 1.65

34 13U8M BODY A NAME PLATE 2.75

35 10LCY FIXING BOLT 1.10

36 13U23 BODY A 33.00

37 10LA3 FIXING BOLT 1.65

38 10F5D ROLLER CLUTCH BEARING A-RB *Cannot be ordered 17.05

39 13UCY ROLLER CLUTCH INNER TUBE 6.05

40 13UXT STAR DRAG PLATE 4.40

41 10JB0 DRAG SOUND OUTPUT SRATCHET 2.75

42 10SE0 STAR DRAG WASHER 6.05

43 10C0T DRAGCLICK PIN 2.75

44 10J8A DRAGCLICK SPRING 1.65

45 10J87 DRAG SPRING HOLDER 1.65

46 13UXS DRIVE GEAR 24.75

47 10DQK STAR DRAG WASHER 6.05

48 10R6Z STOPPER GEAR 6.05

49 13ULM DRIVE GEAR SHAFT 7.15

50 10E23 FIXING BOLT 1.10

51 109T1 DRIVE GEAR SHAFT FIXING PLATE 2.75

52 10G6D WASHER 1.65

53 105NK E-TYPE RETAINING RING 2.5 1.10

54 13SHN LEVEL WIND GUARD 2.20

55 10LCQ FIXING BOLT 1.10

56 10FJB LEVEL WIND RECEIVING 1.65

57 10CFU WASHER 1.10

58 10BHQ WORM SHAFT PIN 2.75

59 108WQ O-RING 1.65

60 10R51 LEVEL WIND GROUP 3.30

61 13SPT PINION GEAR 11.55

62 100U9 CLUTCH YOKE SPRING 1.10

63 10LV0 FIXING BOLT 1.10

64 100UH CLUTCH YOKE 1.65

65 100US CLUTCH CAM PUSHER PLATE 3.85

66 100UK CLUTCH CAM 2.75

67 10MME CLUTCH CLAW 3.85

68 10R1H CLUTCH SPRING 1.65

69 10QZV CLUTCH PLATE 4.95

70 10LF4 FIXING BOLT 1.10

71 10190 WASHER 1.65

72 100S4 FIXING BOLT 1.10

73 10R56 BODY A SHEET 3.30

74 105NC E-TYPE RETAINING RING 2 1.10

75 100K0 WASHER 1.10

76 100G7 LEVEL WIND GUARD BUSH 1.10

77 13TDA CLUTCH LEVER CATCH (B) 1.10

78 13JQQ FIXING BOLT 1.65

79 13H6H CLUTCH LEVER SET 6.05

80 13GAN FRAME SET 37.40

81 13S6E LEVEL WIND GUIDE 1.10

83 13S6D LEVEL WIND PIPE 1.10

84 13S5T WORM SHAFT GEAR 2.75

85 10MTB FIXING BOLT 1.10

86 13TXK BALL BEARING (4X10X4) 13.75

87 10MD0 SPOOL CLUTCH PIN 1.65

88 13SVD SPOOL SHAFT SPRING 1.65

89 10MCY SPOOL SHAFT CAM 1.65

90 10JAH WORM SHAFT GEAR 3.85

91 13GNV SPOOL SET (BEARING INCLUDED) 56.10

92 105C2 BALL BEARING (3X10X4) 13.75

93 13JXR FIXING BOLT 1.65

94 13PE6 WASHER 1.65

95 13PKB WASHER 1.10

96 13RTV WORM SHAFT GEAR 1.65

97 13SGH WORM SHAFT GEAR (B) RECEIVER B 2.75

98 13RUN BODY B RECEIVER 5.50

99 13RU2 WORM SHAFT GEAR (B) CATCH 1.65

100 13S5R WORM SHAFT GEAR 2.75

101 1019V WASHER 1.65

102 10LCF FIXING BOLT 1.10

103 10LCP FIXING BOLT 1.65

104 13RGP BODY B 4.40

106 13JDD HANDLE SET 77.00

108 13S61 WORM SHAFT 11.55

109 13FZJ FRAME B RECEIVING SET 13.20

151 10NC0 REEL WRENCH (ACCESSORY) 1.65

PUNT 13FMN INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORY) 2.20

[KAKEDZUKA DESIGN WORKS] SHIMANO Offset Clutch Lever (Blanking model) for 21 ANTARES DC, 22 EXSENCE DC [KDW-019B]

HEDGEHOG STUDIO — 2026-08-20T11:18:57+09:00

Description

SHIMANO 21 ANTARES DC compatible machined aluminum clutch.

It is a blanking model with a lightened body to improve design and grip.

Compared to the normal, the clutch lever is brought closer to the spool.

This allows a larger area to touch the clutch and line at the same time, making it easier to feather a reel with your a thumb.

Color

Chrome

Black

Compatibility

- 21 ANTARES DC
- 22 EXSENCE DC

[Y`Z CRAFT] HYPER LOCK D WASHER LIGHT

HEDGEHOG STUDIO — 2026-08-20T11:03:13+09:00

HYPER LOCK D WASHER LIGHT

part Number：DWL-001
size: outer diameter 20mm×an inner diameter of 8mm×thickness of 0.8mm

part Number：DWL-002
size: outer diameter 29mm×an inner diameter of 8.2mm×thickness of 1.0mm

part Number：DWL-003
size: outer diameter 26.7mm×an inner diameter of 8.2mm×thickness of 1.0mm

part Number：DWL-004
size: outer diameter 23.1mm×an inner diameter of 8.2mm×thickness of 1.0mm

※ Doragugurisu is not required. Anti-sticking agent has been applied to this product.
※ There is no two sides to this product. Which there is no difference in performance in up and down.
※ excessive tightening may cause reel damage. Please note the tightening too much drag.

[DAIWA Genuine] 23 BG SW Spare Spool

HEDGEHOG STUDIO — 2026-08-20T10:57:21+09:00

Product Description

This is DAIWA genuine spool equipped on 23 BG SW series.

You may use as an extra spool with different line strength.

Spec

Model Max. Drag force
(kg) Line Capacity
PE (No.-m)

4000D-CXH 12 1.5-430

2-300

5000D-CXH 12 2-350

2.5-300

6000D-P 12 3-300

4-220

6000D-H 12 3-300

4-220

8000-P 15 3-400

4-300

8000-H 15 3-400

4-300

10000-H 15 4-400

5-300

14000-H 15 5-400

6-300

18000 20 6-400

8-300

| Wide Selection Available! Fishing Lines & Accessories - Find Yours Here.

[Avail] Abu Round Drag SD-AB-C1 for Ambassadeur 2500C series

HEDGEHOG STUDIO — 2026-08-20T10:40:53+09:00

Model

SD-AB-C1R (for Right Handle)
SD-AB-C1L (for Left Handle)

Description

This is an original drag exclusively for the Abu ambassadeur 2500C model.
Compatible with many models such as 1500C-3500C.
The clean shape changes the look of the reel surprisingly.
Since it is a cut aluminum product, it can be replaced with genuine parts to reduce weight.

Reel : ambassadeur 1601C

Color

SD-AB-C1R (for Right Handle)

CHROME

BLACK

RED

GOLD-PLATED

SD-AB-C1L (for Left Handle)

CHROME

BLACK

RED

GOLD-PLATED

About Adjustment with Opptional Washer

Even if the model is originally compatible, the drag may not work properly due to loss or deformation of the genuine washer, or problems such as contact with other parts may occur.
In that case, please adjust with the drag adjustment washer (golden washer) described in the related product.

⇒P-WA 8mm×12mm×0.50mm - Brass (2 Pieces)

Also, for example, in some of ISUZU BC series, this product can be used by adding a washer for 2 mm, but it is surprising to use it with a model that was not supposed at the design stage of this product.
By the way, problems may occur, so please take your own risk.

Spec

Basic Specifications

Material
Duralumin (aluminum alloy)

Weight
approx. 3.5g

Size
Diameter 22.0mm
Thickness 7.7mm

Compatibility
Abu ambassadeur
1500C, 1500CI, 1500C IAR, 1500CA Limited, 1500CDL
1600C, 1601C
150PLUS
2500C, 2500CI, 2500C IAR, 2500CS ROCKET, 2500CDL
2501C
2600C, 2600C Elite
2601C, 2601C Elite
3500C IAR, 3500CS ROCKET, 3500CA Limited
* 3500C (non-IAR) is not compatible.

[MTCW] MTCW Gear Grease

HEDGEHOG STUDIO — 2026-08-20T10:24:33+09:00

New Generation Grease was developed in collaboration with an oil manufacturer trained in the extreme world of fishing.

It is a product for bass fishing that concentrates on ultimate performance.
It combines water resistance, friction reduction, and adsorption and cushioning properties far superior to conventional greases.
You will experience a smooth feel as if gliding on polished ice.

MTGG-T

Viscosity: ★★★☆☆　　　　Smoothness: ★★★★★　　　　Directness: ★★★★★

Lightness: ★★★★★　　　　Water Resistance: ★★★★★　　　　Load Resistance: ★★★☆☆

Recommended for use with: Freshwater. Small. Medium Reels
Capacity: 10 ml
Usage: Gear Grease
Spinning and Baitcasting
JAN: 4560450515203

MTGG-B

Viscosity: ★★★★☆　　　　Smoothness: ★★★★★　　　　Directness: ★★★★★

Lightness: ★★★★★　　　　Water Resistance: ★★★★★　　　　Load Resistance: ★★★★★

Recommended for use with: Freshwater. Small. Medium Reels
Capacity: 10 ml
Usage: Gear Grease
Spinning and Baitcasting
JAN: 4560450515210

MTGG-SW

Viscosity: ★★★★☆　　　　Smoothness: ★★★★★　　　　Directness: ★★★★★

Lightness: ★★★★★　　　　Water Resistance: ★★★★★　　　　Load Resistance: ★★★★★

It is optimized to withstand the harsh environments of saltwater.
It realizes a smooth and highly sensitive feel in use.

Recommended for use with: Saltwater. Medium Reels
Capacity: 10 ml
Usage: Gear Grease
Saltwater. Spinning and Baitcasting
JAN: 4560450515319

This grease provides a smooth, sensitive, and nimble feel for bass fishing.
Applying an appropriate amount to the gear section of the reel forms a tough, sticky, ultra-thin oil film, providing a smooth and sensitive feel as if the reel is gliding.
The tackle industry's first urea-based grease prevents gear wear even after long hours of play.
This grease boasts water resistance not found in other greases, so it maintains its lubricating performance even after a rainy day of play.

In recent years, anglers have become increasingly sensitive to reel customization and reel tuning regardless of the game type, such as light game, trout fishing, and big game fishing.

MTCW has introduced products using rare and valuable materials such as 100% synthetic, ester, and urea grease.

MTGG-SWH is the industry's first material and the highest peak toughness lithium-based grease.

MTGG-SWH

MTGG-SWH is a lithium complex grease.
Compared to other lithium-based greases, lithium complex grease has higher shear stability, so viscosity does not drop quickly and has excellent heat resistance.
It does not easily fall off and continues to adhere even when the reel is left out in the hot sun or sunlight in midsummer or on board a boat for long periods.

Its gel structure blocks splashes and seawater and prevents rusting.

Ideal for large reels, large jigging reels, casting reels (tuna, sunfish, etc.), etc.

It is the strongest grease ever made but solid and smooth, which is essential for fishing.
It is a gem that combines heat resistance, water resistance, and rust prevention.

Recommended for use with: All SW Large Reels
Capacity: 10 ml
Usage: Gear Grease
Saltwater. Spinning and Baitcasting
JAN: 4560450510727

| Usage Guide

- MTGG-T: Best paired with MT-01/02. For freshwater, level wind mechanisms of baitcasting reels, and general spinning reel overhaul

- MTGG-B: Best paired with MT-03/04. For light saltwater games such as seabass, Eging (Squid Jig Fishing), and also for freshwater bass fishing

- MTGG-SW: Stronger resistance to saltwater than T or B types. Recommended for rockfish, seabass, and Eging (Squid Jig Fishing) when reels are frequently rinsed after use. Suitable for 4000–6000 size reels

- MTGG-SWH: Lithium-based gel grease. Extremely water-resistant, recommended for large reels (6000–18000) used in jigging and offshore fishing where reels are often splashed with seawater. Not recommended for small reels due to heavy rotation feel

| A Full Lineup of Oils & Greases from All Major Brands!
  Choose the Right One According to the Application for Spinning or Baitcasting Reels.

[SHIMANO] Genuine Spare Parts for 20 STELLA SW 6000HG Product Code: 040787 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T10:24:27+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No141/ Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/4525

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

*F01 13QRF REEL BAG (ACCESSORY) 28.05

1 101WN DRAG KNOB SET 45.10

3 10B88 STOPPER SPRING 1.65

4 108WC O-RING SM26 1.65

5 10LWR SPOOL BEARING SPACER 9.35

6 10NFD SPOOL BEARING RECEIVER ASSEMBLY 22.55

7 10B9Z OVAL WASHER 2.75

8 10BE8 EAR WASHERS 22.55

9 1031R DRAG WASHERS 4.95

10 10AHH SPOOL INSERT 3.85

11 104JT BALL BEARING (6 X 10 X 3) 13.75

15 10PVL SET SCREW *Cannot be ordered 1.65

16 10EAG PIN *Cannot be ordered 1.10

18 10JJU SOUNDING OVAL GUIDE 9.35

19 109HE SOUNDING OVAL WASHER 3.85

20 10MGD FIXING BOLT 1.10

21 10C1J DRAG COVER 2.75

22 101N7 DRAG COVER NAMEPLATE 3.85

23 10MPR BODY A SHEET B FIXING BOLT 1.10

24 10LZ2 FIXING BOLT 2.75

25 101P2 RETAINER 1.65

26 10G8C WASHER 1.10

27 107F2 ROTATING FRAME BEARING SEAL 2.75

28 105BN BALL BEARING (5 X 9 X 3) 13.75

29 100S6 ROTOR BEARING COLLAR 1.65

30 1080Y ROTOR NUT 9.35

31 103LB FIXING BOLT 1.10

32 10E3F ROTOR FLANGE 9.35

33 10E30 ROTOR 67.65

34 10LTL SPOOL SHAFT BEARING GUIDE 9.35

35 10PRL SET SCREW (M2 X 5) 1.65

36 101DN SPOOL WASHER 2.20

37 10RBU MAIN SHAFT BEARING SEAL 3.85

38 1018N SPOOL RECEIVER (A) 2.75

39 1015M FIXING BOLT 1.65

40 10MHC ROLLER CLUTCH SEAL COVER 2.75

41 108WZ O-RING 3.85

42 10RR7 ROLLER CLUTCH SEAL ASSEMBLY *Cannot be ordered 17.05

43 10J2G ROTOR WASHER 1.65

44 10667 ROLLER CLUTCH INNER 3.85

45 10E39 ROTOR GUARD (A) 2.75

46 10MT4 FIXING BOLT 1.10

47 10E3G ROTOR GUARD (B) 2.75

48 1077Q INNER GERI LEVER SOUNDING SHIBANE 1.65

49 106ZD CLICK PIN 1.65

50 10E3D ARM CAM SPRING COVER 9.35

51 106ZG FIXING BOLT 1.65

52 10CYU FIXING BOLT 2.75

53 10E3A ARM CAM 45.10

54 101NS COLLAR 3.85

55 101NF FIXING BOLT 1.65

56 10K46 FIXING BOLT 6.05

57 10PN1 SET SCREW (M2 X 3) 1.65

58 1016P LINE ROLLER RECEIVER 6.05

59 1016K LINE ROLLER SEAL 1.65

60 104W1 BALL BEARING (5 X 8 X 2) 9.35

61 1015Z BUSH 1.65

62 1015L O-RING 1.65

63 1014P COLLAR 1.65

64 10DUT LINE ROLLER 17.05

65 1014N COLLAR 3.85

66 10RP0 BAIL ASSEMBLY 56.10

67 10Q3F ARM FIXING SHAFT 9.35

68 10R2F ARM SPRING GUIDE (A) COLLAR BUSH 1.65

69 101N5 ARM SPRING GUIDE (A) 3.85

70 101D9 ARM SPRING GUIDE (A) COLLAR 1.65

71 1028M ARM CAM SPRING 1.65

72 10R2E ARM CAM SPRING GUIDE (B) 2.75

73 101NG INNER GERI LEVER 1.65

74 10E31 BAIL MOUNTING COVER 9.35

75 10QPK ROLLER CLUTCH ASSEMBLY *Cannot be ordered 11.55

76 10LAD O-RING 1.10

77 104FW FRICTION RING 3.85

78 10ML2 FIXING BOLT 2.75

79 101NN PUSH PLATE 3.85

80 1028S WASHER 1.10

81 104Q6 BALL BEARING (7 X 14 X 5) 13.75

82 1028H PINION GEAR 34.10

83 104JS BALL BEARING (6 X 10 X 3) 13.75

84 101P0 BUSH 1.65

85 101MT INTERMEDIATE GEAR SHAFT 2.75

86 101NL INTERNAL GERI HIT 1.65

87 10DVQ HANDLE SCREW CAP 22.55

89 101N9 SLIDER GUIDE 2.75

90 10JAB O-RING 1.65

91 101NZ WORM SHAFT 11.55

92 10PDA BALL BEARING (3 X 6 X 2.5) 13.75

93 100XZ WASHER 2.20

94 10TK0 WASHER 1.65

95 1015D BUSH 3.85

96 10TNF O-RING 1.65

97 101NK WORM SHAFT COVER 2.75

98 10E8M FIXING BOLT 1.65

99 101NQ INTERMEDIATE GEAR (LARGE) 9.35

100 1028T INTERMEDIATE GEAR (SMALL) 9.35

101 10160 BENDING WASHER 1.10

102 101N2 WORM SHAFT GEAR 9.35

103 10RQL MAIN SHAFT ASSEMBLY 28.05

104 106VM WORM SHAFT PIN 4.95

105 100CW WASHER 2.20

106 101NW COLLAR 3.85

107 10HAF WORM SHAFT PIN PUSH PLATE 1.65

108 10E3E BODY GUARD 11.55

109 10RZ1 FIXING BOLT 3.85

110 101NX BODY SEAL 3.85

111 101NM BEARING SEAL 4.95

112 10BGE WASHER 1.65

113 104PT BALL BEARING (8 X 14 X 4) 13.75

114 1055G FIXING BOLT 1.65

115 1028J DRIVE GEAR ASSEMBLY 45.10

116 10DKJ WASHER 2.20

117 10RTD LID 45.10

118 10A6P FIXING BOLT 1.65

119 10A6N FIXING BOLT 1.65

120 101MV HANDLE ASSEMBLY 190.30

121 10RTA HANDLE SHAFT FLANGE 45.10

122 101HY HANDLE 67.65

123 104FH WASHER 2.20

124 10DVA HANDLE KNOB ASSEMBLY 67.65

125 10KX1 BALL BEARING (4 X 9 X 4) 13.75

126 103E9 FIXING BOLT 1.10

127 10E83 HANDLE CAP 6.05

128 109UV THREAD STOPPER BELT (S) (ACCESSORY) 6.05

129 10JMD DRAG CLICK SPRING 1.65

130 1035W SPOOL PIN 1.65

139 108WF O-RING 1.10

140 10HV3 WASHER 1.10

141 101P5 SPOOL ASSEMBLY 212.30

142 101NJ RING *Cannot be ordered 22.55

143 101NA COLLAR *Cannot be ordered 11.55

144 101N1 O-RING *Cannot be ordered 1.65

145 101F9 BODY 157.30

146 108WA O-RING 1.65

147 10LAB O-RING 1.10

148 108W9 O-RING (3 X 5) 1.65

181 10S32 WASHER 2.20

BNKI 13R4Y EXPLODED VIEW (ACCESSORIES) 1.65

ITOS 13QPZ STOPPER SEAL 1.65

MH01 13NNR NAMEPLATE ON THE BACK OF THE LEG 3.85

OIL2 10LQ1 SSRO-01 OIL (4.5G) 3.85

TRST 13PMG INSTRUCTION MANUAL (ACCESSORY) 1.65

[SHIMANO] Genuine Spare Parts for 20 STELLA SW 6000PG Product Code: 040770 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T10:21:21+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No151 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/4525

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

*F01 13QRF REEL BAG (ACCESSORY) 28.05

1 101WN DRAG KNOB SET 45.10

3 10B88 STOPPER SPRING 1.65

4 108WC O-RING SM26 1.65

5 10LWR SPOOL BEARING SPACER 9.35

6 10NFD SPOOL BEARING RECEIVER ASSEMBLY 22.55

7 10B9Z OVAL WASHER 2.75

8 10BE8 EAR WASHERS 22.55

9 1031R DRAG WASHERS 4.95

10 10AHH SPOOL INSERT 3.85

11 104JT BALL BEARING (6 X 10 X 3) 13.75

15 10PVL SET SCREW *Cannot be ordered 1.65

16 10EAG PIN *Cannot be ordered 1.10

18 10JJU SOUNDING OVAL GUIDE 9.35

19 109HE SOUNDING OVAL WASHER 3.85

20 10MGD FIXING BOLT 1.10

21 10C1J DRAG COVER 2.75

22 101N7 DRAG COVER NAMEPLATE 3.85

23 10MPR BODY A SHEET B FIXING BOLT 1.10

24 10LZ2 FIXING BOLT 2.75

25 101P2 RETAINER 1.65

26 10G8C WASHER 1.10

27 107F2 ROTATING FRAME BEARING SEAL 2.75

28 105BN BALL BEARING (5 X 9 X 3) 13.75

29 100S6 ROTOR BEARING COLLAR 1.65

30 1080Y ROTOR NUT 9.35

31 103LB FIXING BOLT 1.10

32 10E3F ROTOR FLANGE 9.35

33 10E30 ROTOR 67.65

34 10LTL SPOOL SHAFT BEARING GUIDE 9.35

35 10PRL SET SCREW (M2 X 5) 1.65

36 101DN SPOOL WASHER 2.20

37 10RBU MAIN SHAFT BEARING SEAL 3.85

38 1018N SPOOL RECEIVER (A) 2.75

39 1015M FIXING BOLT 1.65

40 10MHC ROLLER CLUTCH SEAL COVER 2.75

41 108WZ O-RING 3.85

42 10RR7 ROLLER CLUTCH SEAL ASSEMBLY *Cannot be ordered 17.05

43 10J2G ROTOR WASHER 1.65

44 10667 ROLLER CLUTCH INNER 3.85

45 10E39 ROTOR GUARD (A) 2.75

46 10MT4 FIXING BOLT 1.10

47 10E3G ROTOR GUARD (B) 2.75

48 1077Q BAIL TRIP LEVER SOUNDING PIN 1.65

49 106ZD SOUNDING PIN 1.65

50 10E3D ARM CAM SPRING COVER 9.35

51 106ZG FIXING BOLT 1.65

52 10CYU FIXING BOLT 2.75

53 10E3A ARM CAM 45.10

54 101NS COLLAR 3.85

55 101NF FIXING BOLT 1.65

56 10K46 FIXING BOLT 6.05

57 10PN1 SET SCREW (M2 X 3) 1.65

58 1016P LINE ROLLER RECEIVER 6.05

59 1016K LINE ROLLER SEAL 1.65

60 104W1 BALL BEARING (5 X 8 X 2) 9.35

61 1015Z BUSH 1.65

62 1015L O-RING 1.65

63 1014P COLLAR 1.65

64 10DUT LINE ROLLER 17.05

65 1014N COLLAR 3.85

66 10RP0 BAIL ASSEMBLY 56.10

67 10Q3F ARM FIXING SHAFT 9.35

68 10R2F ARM SPRING GUIDE (A) COLLAR BUSH 1.65

69 101N5 ARM SPRING GUIDE (A) 3.85

70 101D9 ARM SPRING GUIDE (A) COLLAR 1.65

71 1028M ARM CAM SPRING 1.65

72 10R2E ARM CAM SPRING GUIDE (B) 2.75

73 101NG INNER GERI LEVER 1.65

74 10E31 BAIL MOUNTING COVER 9.35

75 10QPK ROLLER CLUTCH ASSEMBLY *Cannot be ordered 11.55

76 10LAD O-RING 1.10

77 104FW FRICTION RING 3.85

78 10ML2 FIXING BOLT 2.75

79 101NN PUSH PLATE 3.85

80 1028S WASHER 1.10

81 104Q6 BALL BEARING (7 X 14 X 5) 13.75

83 104JS BALL BEARING (6 X 10 X 3) 13.75

84 101P0 BUSH 1.65

85 101MT INTERMEDIATE GEAR SHAFT 2.75

86 101NL INNER GEAR CONTACT 1.65

89 101N9 SLIDER GUIDE 2.75

90 10JAB O-RING 1.65

91 101NZ WORM SHAFT 11.55

92 10PDA BALL BEARING (3 X 6 X 2.5) 13.75

93 100XZ WASHER 2.20

94 10TK0 WASHER 1.65

95 1015D BUSH 3.85

96 10TNF O-RING 1.65

97 101NK WORM SHAFT COVER 2.75

98 10E8M FIXING BOLT 1.65

100 1028T INTERMEDIATE GEAR (SMALL) 9.35

101 10160 BENDING WASHER 1.10

102 101N2 WORM SHAFT GEAR 9.35

103 10RQL MAIN SHAFT ASSEMBLY 28.05

104 106VM WORM SHAFT PIN 4.95

105 100CW WASHER 2.20

106 101NW COLLAR 3.85

107 10HAF WORM SHAFT PIN PUSH PLATE 1.65

108 10E3E BODY GUARD 11.55

109 10RZ1 FIXING BOLT 3.85

110 101NX BODY SEAL 3.85

111 101NM BEARING SEAL 4.95

112 10BGE WASHER 1.65

113 104PT BALL BEARING (8 X 14 X 4) 13.75

114 1055G FIXING BOLT 1.65

116 10DKJ WASHER 2.20

117 10RTD LID 45.10

118 10A6P FIXING BOLT 1.65

119 10A6N FIXING BOLT 1.65

122 101HY HANDLE 67.65

123 104FH WASHER 2.20

125 10KX1 BALL BEARING (4 X 9 X 4) 13.75

126 103E9 FIXING BOLT 1.10

127 10E83 HANDLE CAP 6.05

128 109UV THREAD STOPPER BELT (S) (ACCESSORY) 6.05

129 10JMD DRAG CLICK SPRING 1.65

130 1035W SPOOL PIN 1.65

139 108WF O-RING 1.10

140 10HV3 WASHER 1.10

142 101NJ RING *Cannot be ordered 22.55

143 101NA COLLAR *Cannot be ordered 11.55

144 101N1 O-RING *Cannot be ordered 1.65

146 108WA O-RING 1.65

147 10LAB O-RING 1.10

148 108W9 O-RING (3 X 5) 1.65

151 101N3 SPOOL ASSEMBLY 212.30

155 101P6 PINION GEAR 34.10

156 101P3 DRIVE GEAR ASSEMBLY 45.10

157 1028N INTERMEDIATE GEAR (LARGE) 9.35

158 101NR HANDLE SCREW CAP 22.55

159 1022G BODY 157.30

160 101N8 HANDLE ASSEMBLY 190.30

161 10RPP HANDLE SHAFT FLANGE 45.10

162 10EDU HANDLE KNOB ASSEMBLY 67.65

181 10S32 WASHER 2.20

BNKI 13R4Y EXPLODED VIEW (ACCESSORIES) 1.65

ITOS 13QPZ THREAD STOPPER STICKER 1.65

MH01 13NNP NAMEPLATE ON THE BACK OF THE LEG 3.85

OIL2 10LQ1 SSRO-01 OIL (4.5G) 3.85

TRST 13PMG INSTRUCTION MANUAL (ACCESSORY) 1.65

[SHIMANO] Genuine Spare Parts for 20 STELLA SW 5000XG Product Code: 040763 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T10:18:13+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.2 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/4525

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
*Parts with square numbers are for repair only.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

*F01 13QRF REEL BAG (ACCESSORY) 28.05

1 101WN DRAG KNOB SET 45.10

3 10B88 STOPPER SPRING 1.65

4 108WC O-RING SM26 1.65

5 10LWR SPOOL BEARING SPACER 9.35

6 10NFD SPOOL BEARING RECEIVER ASSEMBLY 22.55

7 10B9Z OVAL WASHER 2.75

8 10BE8 EAR WASHERS 22.55

9 1031R DRAG WASHERS 4.95

10 10AHH SPOOL INSERT 3.85

11 104JT BALL BEARING (6 X 10 X 3) 13.75

12 100L4 COLLAR *Cannot be ordered 11.55

13 1028L O-RING *Cannot be ordered 1.65

14 101NE RING *Cannot be ordered 22.55

15 10PVL SET SCREW *Cannot be ordered 1.65

16 10EAG PIN *Cannot be ordered 1.10

18 10JJU OTOIDE KOBAN GUIDE 9.35

19 109HE OTOE OVAL WASHER 3.85

20 10MGD FIXING BOLT 1.10

21 10C1J DRAG COVER 2.75

22 101N7 DRAG COVER NAMEPLATE 3.85

23 10MPR BODY A SHEET B FIXING BOLT 1.10

24 10LZ2 FIXING BOLT 2.75

25 101P2 RETAINER 1.65

26 10G8C WASHER 1.10

27 107F2 ROTATING FRAME BEARING SEAL 2.75

28 105BN BALL BEARING (5 X 9 X 3) 13.75

29 100S6 ROTOR BEARING COLLAR 1.65

30 1080Y ROTOR NUT 9.35

31 103LB FIXING BOLT 1.10

32 10E3F ROTOR FLANGE 9.35

33 10E30 ROTOR 67.65

34 10LTL SPOOL SHAFT BEARING GUIDE 9.35

35 10PRL SET SCREW (M2 X 5) 1.65

36 101DN SPOOL WASHER 2.20

37 10RBU MAIN SHAFT BEARING SEAL 3.85

38 1018N SPOOL RECEIVER (A) 2.75

39 1015M FIXING BOLT 1.65

40 10MHC ROLLER CLUTCH SEAL COVER 2.75

41 108WZ O-RING 3.85

42 10RR7 ROLLER CLUTCH SEAL ASSEMBLY *Cannot be ordered 17.05

43 10J2G ROTOR WASHER 1.65

44 10667 ROLLER CLUTCH INNER 3.85

45 10E39 ROTOR GUARD (A) 2.75

46 10MT4 FIXING BOLT 1.10

47 10E3G ROTOR GUARD (B) 2.75

48 1077Q BAIL TRIP LEVER SOUNDING PIN 1.65

49 106ZD SOUNDING PIN 1.65

50 10E3D ARM CAM SPRING COVER 9.35

51 106ZG FIXING BOLT 1.65

52 10CYU FIXING BOLT 2.75

53 10E3A ARM CAM 45.10

54 101NS COLLAR 3.85

55 101NF FIXING BOLT 1.65

56 10K46 FIXING BOLT 6.05

57 10PN1 SET SCREW (M2 X 3) 1.65

58 1016P LINE ROLLER RECEIVER 6.05

59 1016K LINE ROLLER SEAL 1.65

60 104W1 BALL BEARING (5 X 8 X 2) 9.35

61 1015Z BUSH 1.65

62 1015L O-RING 1.65

63 1014P COLLAR 1.65

64 10DUT LINE ROLLER 17.05

65 1014N COLLAR 3.85

66 10RP0 BAIL ASSEMBLY 56.10

67 10Q3F ARM FIXING SHAFT 9.35

68 10R2F ARM SPRING GUIDE (A) COLLAR BUSH 1.65

69 101N5 ARM SPRING GUIDE (A) 3.85

70 101D9 ARM SPRING GUIDE (A) COLLAR 1.65

71 1028M ARM CAM SPRING 1.65

72 10R2E ARM CAM SPRING GUIDE (B) 2.75

73 101NG INNER GERI LEVER 1.65

74 10E31 BAIL MOUNTING COVER 9.35

75 10QPK ROLLER CLUTCH ASSEMBLY *Cannot be ordered 11.55

76 10LAD O-RING 1.10

77 104FW FRICTION RING 3.85

78 10ML2 FIXING BOLT 2.75

79 101NN PUSH PLATE 3.85

80 1028S WASHER 1.10

81 104Q6 BALL BEARING (7 X 14 X 5) 13.75

83 104JS BALL BEARING (6 X 10 X 3) 13.75

84 101P0 BUSH 1.65

85 101MT INTERMEDIATE GEAR SHAFT 2.75

86 101NL INTERNAL GERI HIT 1.65

87 10DVQ HANDLE SCREW CAP 22.55

89 101N9 SLIDER GUIDE 2.75

90 10JAB O-RING 1.65

91 101NZ WORM SHAFT 11.55

92 10PDA BALL BEARING (3 X 6 X 2.5) 13.75

93 100XZ WASHER 2.20

94 10TK0 WASHER 1.65

95 1015D BUSH 3.85

96 10TNF O-RING 1.65

97 101NK WORM SHAFT COVER 2.75

98 10E8M FIXING BOLT 1.65

100 1028T INTERMEDIATE GEAR (SMALL) 9.35

101 10160 BENDING WASHER 1.10

102 101N2 WORM SHAFT GEAR 9.35

103 10RQL MAIN SHAFT ASSEMBLY 28.05

104 106VM WORM SHAFT PIN 4.95

105 100CW WASHER 2.20

106 101NW COLLAR 3.85

107 10HAF WORM SHAFT PIN PUSH PLATE 1.65

108 10E3E BODY GUARD 11.55

109 10RZ1 FIXING BOLT 3.85

110 101NX BODY SEAL 3.85

111 101NM BEARING SEAL 4.95

112 10BGE WASHER 1.65

113 104PT BALL BEARING (8 X 14 X 4) 13.75

114 1055G FIXING BOLT 1.65

116 10DKJ WASHER 2.20

117 10RTD LID 45.10

118 10A6P FIXING BOLT 1.65

119 10A6N FIXING BOLT 1.65

121 10RTA HANDLE SHAFT FLANGE 45.10

122 101HY HANDLE 67.65

123 104FH WASHER 2.20

125 10KX1 BALL BEARING (4 X 9 X 4) 13.75

126 103E9 FIXING BOLT 1.10

128 109UV THREAD STOPPER BELT (S) (ACCESSORY) 6.05

129 10JMD DRAG CLICK SPRING 1.65

130 1035W SPOOL PIN 1.65

131 101MW SPOOL ASSEMBLY 212.30

132 101MP PINION GEAR 34.10

133 101NH DRIVE GEAR ASSEMBLY 45.10

134 101MZ INTERMEDIATE GEAR (LARGE) 9.35

135 101PC BODY 157.30

136 101PQ HANDLE KNOB 67.65

137 101NU HANDLE CAP 6.05

138 10277 HANDLE ASSEMBLY 190.30

139 108WF O-RING 1.10

140 10HV3 WASHER 1.10

146 108WA O-RING 1.65

147 10LAB O-RING 1.10

148 108W9 O-RING (3 X 5) 1.65

181 10S32 WASHER 2.20

BNKI 13R4Y EXPLODED VIEW (ACCESSORIES) 1.65

ITOS 13QPZ STOPPER SEAL 1.65

MH01 13NNN NAMEPLATE ON THE BACK OF THE LEG 3.85

OIL2 10LQ1 SSRO-01 OIL (4.5G) 3.85

TRST 13PMG INSTRUCTION MANUAL (ACCESSORY) 1.65

[SHIMANO] Genuine Spare Parts for 20 STELLA SW 5000HG Product Code: 040756 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T10:14:54+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.2 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/4525

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
*Parts with square numbers are for repair only.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

*F01 13QRF REEL BAG (ACCESSORY) 28.05

1 101WN DRAG KNOB ASSEMBLY 45.10

2 101N4 SPOOL ASSEMBLY 212.30

3 10B88 STOPPER SPRING 1.65

4 108WC O-RING SM26 1.65

5 10LWR SPOOL BEARING SPACER 9.35

6 10NFD SPOOL BEARING RECEIVER ASSEMBLY 22.55

7 10B9Z OVAL WASHER 2.75

8 10BE8 EAR WASHERS 22.55

9 1031R DRAG WASHERS 4.95

10 10AHH SPOOL INSERT 3.85

11 104JT BALL BEARING (6 X 10 X 3) 13.75

12 100L4 COLLAR *Cannot be ordered 11.55

13 1028L O-RING *Cannot be ordered 1.65

14 101NE RING *Cannot be ordered 22.55

15 10PVL SET SCREW *Cannot be ordered 1.65

16 10EAG PIN *Cannot be ordered 1.10

18 10JJU OTOIDE KOBAN GUIDE 9.35

19 109HE OTOE OVAL WASHER 3.85

20 10MGD FIXING BOLT 1.10

21 10C1J DRAG COVER 2.75

22 101N7 DRAG COVER NAMEPLATE 3.85

23 10MPR BODY A SHEET B FIXING BOLT 1.10

24 10LZ2 FIXING BOLT 2.75

25 101P2 RETAINER 1.65

26 10G8C WASHER 1.10

27 107F2 ROTATING FRAME BEARING SEAL 2.75

28 105BN BALL BEARING (5 X 9 X 3) 13.75

29 100S6 ROTOR BEARING COLLAR 1.65

30 1080Y ROTOR NUT 9.35

31 103LB FIXING BOLT 1.10

32 10E3F ROTOR FLANGE 9.35

33 10E30 ROTOR 67.65

34 10LTL SPOOL SHAFT BEARING GUIDE 9.35

35 10PRL SET SCREW (M2 X 5) 1.65

36 101DN SPOOL WASHER 2.20

37 10RBU MAIN SHAFT BEARING SEAL 3.85

38 1018N SPOOL RECEIVER (A) 2.75

39 1015M FIXING BOLT 1.65

40 10MHC ROLLER CLUTCH SEAL COVER 2.75

41 108WZ O-RING 3.85

42 10RR7 ROLLER CLUTCH SEAL ASSEMBLY *Cannot be ordered 17.05

43 10J2G ROTOR WASHER 1.65

44 10667 ROLLER CLUTCH INNER 3.85

45 10E39 ROTOR GUARD (A) 2.75

46 10MT4 FIXING BOLT 1.10

47 10E3G ROTOR GUARD (B) 2.75

48 1077Q BAIL TRIP LEVER SOUNDING PIN 1.65

49 106ZD SOUNDING PIN 1.65

50 10E3D ARM CAM SPRING COVER 9.35

51 106ZG FIXING BOLT 1.65

52 10CYU FIXING BOLT 2.75

53 10E3A ARM CAM 45.10

54 101NS COLLAR 3.85

55 101NF FIXING BOLT 1.65

56 10K46 FIXING BOLT 6.05

57 10PN1 SET SCREW (M2 X 3) 1.65

58 1016P LINE ROLLER RECEIVER 6.05

59 1016K LINE ROLLER SEAL 1.65

60 104W1 BALL BEARING (5 X 8 X 2) 9.35

61 1015Z BUSH 1.65

62 1015L O-RING 1.65

63 1014P COLLAR 1.65

64 10DUT LINE ROLLER 17.05

65 1014N COLLAR 3.85

66 10RP0 BAIL ASSEMBLY 56.10

67 10Q3F ARM FIXING SHAFT 9.35

68 10R2F ARM SPRING GUIDE (A) COLLAR BUSH 1.65

69 101N5 ARM SPRING GUIDE (A) 3.85

70 101D9 ARM SPRING GUIDE (A) COLLAR 1.65

71 1028M ARM CAM SPRING 1.65

72 10R2E ARM CAM SPRING GUIDE (B) 2.75

73 101NG INNER GERI LEVER 1.65

74 10E31 BAIL MOUNTING COVER 9.35

75 10QPK ROLLER CLUTCH ASSEMBLY *Cannot be ordered 11.55

76 10LAD O-RING 1.10

77 104FW FRICTION RING 3.85

78 10ML2 FIXING BOLT 2.75

79 101NN PUSH PLATE 3.85

80 1028S WASHER 1.10

81 104Q6 BALL BEARING (7 X 14 X 5) 13.75

82 1028H PINION GEAR 34.10

83 104JS BALL BEARING (6 X 10 X 3) 13.75

84 101P0 BUSH 1.65

85 101MT INTERMEDIATE GEAR SHAFT 2.75

86 101NL INTERNAL GERI HIT 1.65

87 10DVQ HANDLE SCREW CAP 22.55

88 10RPN BODY 157.30

89 101N9 SLIDER GUIDE 2.75

90 10JAB O-RING 1.65

91 101NZ WORM SHAFT 11.55

92 10PDA BALL BEARING (3 X 6 X 2.5) 13.75

93 100XZ WASHER 2.20

94 10TK0 WASHER 1.65

95 1015D BUSH 3.85

96 10TNF O-RING 1.65

97 101NK WORM SHAFT COVER 2.75

98 10E8M FIXING BOLT 1.65

99 101NQ INTERMEDIATE GEAR (LARGE) 9.35

100 1028T INTERMEDIATE GEAR (SMALL) 9.35

101 10160 BENDING WASHER 1.10

102 101N2 WORM SHAFT GEAR 9.35

103 10RQL MAIN SHAFT ASSEMBLY 28.05

104 106VM WORM SHAFT PIN 4.95

105 100CW WASHER 2.20

106 101NW COLLAR 3.85

107 10HAF WORM SHAFT PIN PUSH PLATE 1.65

108 10E3E BODY GUARD 11.55

109 10RZ1 FIXING BOLT 3.85

110 101NX BODY SEAL 3.85

111 101NM BEARING SEAL 4.95

112 10BGE WASHER 1.65

113 104PT BALL BEARING (8 X 14 X 4) 13.75

114 1055G FIXING BOLT 1.65

115 1028J DRIVE GEAR ASSEMBLY 45.10

116 10DKJ WASHER 2.20

117 10RTD LID 45.10

118 10A6P FIXING BOLT 1.65

119 10A6N FIXING BOLT 1.65

120 101MV HANDLE ASSEMBLY 190.30

121 10RTA HANDLE SHAFT FLANGE 45.10

122 101HY HANDLE 67.65

123 104FH WASHER 2.20

124 10DVA HANDLE KNOB ASSEMBLY 67.65

125 10KX1 BALL BEARING (4 X 9 X 4) 13.75

126 103E9 FIXING BOLT 1.10

127 10E83 HANDLE CAP 6.05

128 109UV THREAD STOPPER BELT (S) (ACCESSORY) 6.05

129 10JMD DRAG CLICK SPRING 1.65

130 1035W SPOOL PIN 1.65

139 108WF O-RING 1.10

140 10HV3 WASHER 1.10

146 108WA O-RING 1.65

147 10LAB O-RING 1.10

148 108W9 O-RING (3 X 5) 1.65

181 10S32 WASHER 2.20

BNKI 13R4Y EXPLODED VIEW (ACCESSORIES) 1.65

ITOS 13QPZ STOPPER SEAL 1.65

MH01 13NNQ NAMEPLATE ON THE BACK OF THE LEG 3.85

OIL2 10LQ1 SSRO-01 OIL (4.5G) 3.85

TRST 13PMG INSTRUCTION MANUAL (ACCESSORY) 1.65

[SHIMANO] Genuine Spare Parts for 20 STELLA SW 6000XG Product Code: 040794 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T09:50:51+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No171/ Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/4525

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

*F01 13QRF REEL BAG (ACCESSORY) 28.05

1 101WN DRAG KNOB SET 45.10

3 10B88 STOPPER SPRING 1.65

4 108WC O-RING SM26 1.65

5 10LWR SPOOL BEARING SPACER 9.35

6 10NFD SPOOL BEARING RECEIVER ASSEMBLY 22.55

7 10B9Z OVAL WASHER 2.75

8 10BE8 EAR WASHERS 22.55

9 1031R DRAG WASHERS 4.95

10 10AHH SPOOL INSERT 3.85

11 104JT BALL BEARING (6 X 10 X 3) 13.75

15 10PVL SET SCREW *Cannot be ordered 1.65

16 10EAG PIN *Cannot be ordered 1.10

18 10JJU SOUNDING OVAL GUIDE 9.35

19 109HE SOUNDING OVAL WASHER 3.85

20 10MGD FIXING BOLT 1.10

21 10C1J DRAG COVER 2.75

22 101N7 DRAG COVER NAMEPLATE 3.85

23 10MPR BODY A SHEET B FIXING BOLT 1.10

24 10LZ2 FIXING BOLT 2.75

25 101P2 RETAINER 1.65

26 10G8C WASHER 1.10

27 107F2 ROTATING FRAME BEARING SEAL 2.75

28 105BN BALL BEARING (5 X 9 X 3) 13.75

29 100S6 ROTOR BEARING COLLAR 1.65

30 1080Y ROTOR NUT 9.35

31 103LB FIXING BOLT 1.10

32 10E3F ROTOR FLANGE 9.35

33 10E30 ROTOR 67.65

34 10LTL SPOOL SHAFT BEARING GUIDE 9.35

35 10PRL SET SCREW (M2 X 5) 1.65

36 101DN SPOOL WASHER 2.20

37 10RBU MAIN SHAFT BEARING SEAL 3.85

38 1018N SPOOL RECEIVER (A) 2.75

39 1015M FIXING BOLT 1.65

40 10MHC ROLLER CLUTCH SEAL COVER 2.75

41 108WZ O-RING 3.85

42 10RR7 ROLLER CLUTCH SEAL ASSEMBLY *Cannot be ordered 17.05

43 10J2G ROTOR WASHER 1.65

44 10667 ROLLER CLUTCH INNER 3.85

45 10E39 ROTOR GUARD (A) 2.75

46 10MT4 FIXING BOLT 1.10

47 10E3G ROTOR GUARD (B) 2.75

48 1077Q INNER GERI LEVER SOUNDING SHIBANE 1.65

49 106ZD CLICK PIN 1.65

50 10E3D ARM CAM SPRING COVER 9.35

51 106ZG FIXING BOLT 1.65

52 10CYU FIXING BOLT 2.75

53 10E3A ARM CAM 45.10

54 101NS COLLAR 3.85

55 101NF FIXING BOLT 1.65

56 10K46 FIXING BOLT 6.05

57 10PN1 SET SCREW (M2 X 3) 1.65

58 1016P LINE ROLLER RECEIVER 6.05

59 1016K LINE ROLLER SEAL 1.65

60 104W1 BALL BEARING (5 X 8 X 2) 9.35

61 1015Z BUSH 1.65

62 1015L O-RING 1.65

63 1014P COLLAR 1.65

64 10DUT LINE ROLLER 17.05

65 1014N COLLAR 3.85

66 10RP0 BAIL ASSEMBLY 56.10

67 10Q3F ARM FIXING SHAFT 9.35

68 10R2F ARM SPRING GUIDE (A) COLLAR BUSH 1.65

69 101N5 ARM SPRING GUIDE (A) 3.85

70 101D9 ARM SPRING GUIDE (A) COLLAR 1.65

71 1028M ARM CAM SPRING 1.65

72 10R2E ARM CAM SPRING GUIDE (B) 2.75

73 101NG INNER GERI LEVER 1.65

74 10E31 BAIL MOUNTING COVER 9.35

75 10QPK ROLLER CLUTCH ASSEMBLY *Cannot be ordered 11.55

76 10LAD O-RING 1.10

77 104FW FRICTION RING 3.85

78 10ML2 FIXING BOLT 2.75

79 101NN PUSH PLATE 3.85

80 1028S WASHER 1.10

81 104Q6 BALL BEARING (7 X 14 X 5) 13.75

83 104JS BALL BEARING (6 X 10 X 3) 13.75

84 101P0 BUSH 1.65

85 101MT INTERMEDIATE GEAR SHAFT 2.75

86 101NL INTERNAL GERI HIT 1.65

87 10DVQ HANDLE SCREW CAP 22.55

89 101N9 SLIDER GUIDE 2.75

90 10JAB O-RING 1.65

91 101NZ WORM SHAFT 11.55

92 10PDA BALL BEARING (3 X 6 X 2.5) 13.75

93 100XZ WASHER 2.20

94 10TK0 WASHER 1.65

95 1015D BUSH 3.85

96 10TNF O-RING 1.65

97 101NK WORM SHAFT COVER 2.75

98 10E8M FIXING BOLT 1.65

100 1028T INTERMEDIATE GEAR (SMALL) 9.35

101 10160 BENDING WASHER 1.10

102 101N2 WORM SHAFT GEAR 9.35

103 10RQL MAIN SHAFT ASSEMBLY 28.05

104 106VM WORM SHAFT PIN 4.95

105 100CW WASHER 2.20

106 101NW COLLAR 3.85

107 10HAF WORM SHAFT PIN PUSH PLATE 1.65

108 10E3E BODY GUARD 11.55

109 10RZ1 FIXING BOLT 3.85

110 101NX BODY SEAL 3.85

111 101NM BEARING SEAL 4.95

112 10BGE WASHER 1.65

113 104PT BALL BEARING (8 X 14 X 4) 13.75

114 1055G FIXING BOLT 1.65

116 10DKJ WASHER 2.20

117 10RTD LID 45.10

118 10A6P FIXING BOLT 1.65

119 10A6N FIXING BOLT 1.65

121 10RTA HANDLE SHAFT FLANGE 45.10

122 101HY HANDLE 67.65

123 104FH WASHER 2.20

125 10KX1 BALL BEARING (4 X 9 X 4) 13.75

126 103E9 FIXING BOLT 1.10

128 109UV THREAD STOPPER BELT (S) (ACCESSORY) 6.05

129 10JMD DRAG CLICK SPRING 1.65

130 1035W SPOOL PIN 1.65

132 101MP PINION GEAR 34.10

133 101NH DRIVE GEAR ASSEMBLY 45.10

134 101MZ INTERMEDIATE GEAR (LARGE) 9.35

136 101PQ HANDLE KNOB 67.65

137 101NU HANDLE CAP 6.05

138 10277 HANDLE ASSEMBLY 190.30

139 108WF O-RING 1.10

140 10HV3 WASHER 1.10

142 101NJ RING *Cannot be ordered 22.55

143 101NA COLLAR *Cannot be ordered 11.55

144 101N1 O-RING *Cannot be ordered 1.65

146 108WA O-RING 1.65

147 10LAB O-RING 1.10

148 108W9 O-RING (3 X 5) 1.65

171 101NV SPOOL ASSEMBLY 212.30

178 1022J BODY 157.30

181 10S32 WASHER 2.20

BNKI 13R4Y EXPLODED VIEW (ACCESSORIES) 1.65

ITOS 13QPZ STOPPER SEAL 1.65

MH01 13NNM NAMEPLATE ON THE BACK OF THE LEG 3.85

OIL2 10LQ1 SSRO-01 OIL (4.5G) 3.85

TRST 13PMG INSTRUCTION MANUAL (ACCESSORY) 1.65

[DAIWA] Genuine Spare Parts for 24 ADMIRA A150XHL Product code: 00621089 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T09:40:45+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

No. Part Name Part Code Price (USD)

1 BRAKE DIAL SC 6J716301 3.30

2 BRAKE DIAL SP 6E167101 2.20

3 BRAKE DIAL 6M160704 8.80

4 BRAKE DIAL RETAINER (A) 6B339801 2.20

5 BRAKE DIAL COLLAR 6F637701 1.10

6 BRAKE DIAL LEAF SP 6H663401 2.20

7 RS PLATE 6M598901 25.30

8 BRAKE DIAL RETAINER (B) 6J843301 2.20

9 BRAKE DIAL RETAINER (B) SC 6G939301 2.20

10 MAG HOLDER 6M162401 8.80

11 RS BEARING W (A) 63757411 1.10

12 RS BEARING W (B) 63757404 1.10

13 RS BEARING W (C) 6G185101 1.10

14 RS BALL BEARING 6G511506 15.40

15 RS BEARING RING 6F032201 2.20

16 SPOOL (16+17) 6M594601 60.50

17 SPOOL PIN 6J339401 2.20

18 FRAME 6M212407 34.10

19 FRONT COVER 6J956613 9.90

20 FRONT COVER SC 6H531508 2.20

21 CLUTCH LEVER 6J956101 9.90

22 CLUTCH LEVER PLATE (L) 6J955601 2.20

23 CLUTCH LEVER PLATE (R) 6J955501 2.20

24 OSCILLATING POST 6M134001 2.20

25 OSCILLATING POST RETAINER 6H704101 2.20

26 LS COVER PLATE 6J955701 2.20

27 CLUTCH CAM BALL BEARING 6G431008 15.40

28 KICK LEVER PLATE (A) 6J765701 3.30

29 KICK LEVER PLATE (A) SC 6H531508 2.20

30 KICK LEVER - SP 6J915301 2.20

31 KICK LEVER 6J638601 6.60

32 CLUTCH CAM PLATE 6J765601 2.20

33 CLUTCH CAM 6J955801 9.90

34 CLUTCH CAM PLATE SC-W 6M070001 1.10

35 CLUTCH CAM PLATE SC 6B360406 2.20

36 KICK LEVER PLATE (B) 6H659101 3.30

37 KICK LEVER PLATE (B) SC 6B032904 2.20

38 CLUTCH PLATE 6H944401 3.30

39 CLUTCH SP 6J313901 2.20

40 PINION + DRIVE GEAR SET 6Z027619 55.00

41 PINION RING 6H448401 2.20

42 PINION BALL BEARING 6G431107 15.40

43 LS PLATE 6M598401 35.20

44 MECHANICAL BRAKE KNOB O-RING 6J279701 1.10

45 MECHANICAL BRAKE KNOB W (A) 6J692001 1.10

46 MECHANICAL BRAKE KNOB W (B) 6B175503 1.10

47 MECHANICAL BRAKE KNOB 6M111901 7.70

49 LS PLATE SC 6G945806 2.20

50 WORM SHAFT RETAINER 63205901 2.20

51 WORM SHAFT W 6B411702 1.10

52 WORM SHAFT COLLAR 6G720001 2.20

53 LEVEL WINDING 6M470501 46.20

54 POLE 6J740101 3.30

55 POLE W 6M161301 1.10

56 POLE HOLDER PIN 6J740201 3.30

57 POLE HOLDER O-RING 6G252202 1.10

58 WORM SHIELD 6J765801 3.30

59 WORM SHAFT 6J912601 7.70

60 WORM SHAFT COLLAR 6G720001 2.20

61 WORM SHAFT GEAR 6J693901 3.30

62 WORM SHAFT GEAR RETAINER 6B339801 2.20

63 GEAR SHAFT W 6G099801 1.10

64 GEAR SHAFT RETAINER 63208002 2.20

66 GEAR SHAFT COLLAR 6F648301 4.40

67 GEAR SHAFT PLATE 6J693701 3.30

68 GEAR SHAFT PLATE SC 6G297002 2.20

69 WORM GEAR 6J693601 4.40

70 GEAR SHAFTS 6M308402 18.70

71 RATCHET 6H660901 3.30

72 DRIVE GEAR W 63746605 1.10

73 PINION + DRIVE GEAR SET 6Z027619 55.00

74 DRAG W 6H359002 6.60

75 DRAG COLLAR 6J740501 17.60

76 DRAG COLLAR SP 6M025201 2.20

77 DRAG COLLAR PIN 6J566201 2.20

78 DRAG COLLAR 6J327701 8.80

79 HANDLE BEARING W (A) 6B553803 1.10

80 ONE-WAY CLUTCH 6J540401 20.90

81 HANDLE BALL BEARING 6B861705 8.80

82 HANDLE BEARING W (B) 6B553801 1.10

83 DRAG HOLDER 6F028203 3.30

84 DRAG HOLDER LEAF SP 6F032401 2.20

85 DRAG SP・W 61508901 2.20

86 STAR DRAG W 6H929501 2.20

87 DRAG NUT 6J141002 7.70

88 DRAG NUT SP 6J011901 2.20

89 STAR DRAG 6J140005 27.50

90 HANDLE W 6M422101 1.10

91 HANDLE 6M595401 93.50

92 HANDLE NUT 6G793310 4.40

93 HANDLE CAP 6J625401 4.40

94 HANDLE CAP SC 6G835504 2.20

200 HANDLE KNOB W 6B411703 1.10

201 HANDLE KNOB COLLARS 6G720001 2.20

202 HANDLE KNOB 6H834201 15.40

203 HANDLE KNOB SC 6B679308 2.20

204 HANDLE KNOB CAP (WITH O-RING) 6M594801 12.10

205 HANDLE KNOB CAP O-RING 6H100001 1.10

[DAIWA] Genuine Spare Parts for 24 ADMIRA A150XH Product code: 00621088 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T09:39:27+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

No. Part Name Part Code Price (USD)

1 BRAKE DIAL SC 6J716301 3.30

2 BRAKE DIAL SP 6E167101 2.20

3 BRAKE DIAL 6M160703 8.80

4 BRAKE DIAL RETAINER (A) 6B339801 2.20

5 BRAKE DIAL COLLAR 6F637701 1.10

6 BRAKE DIAL LEAF SP 6H663401 2.20

7 LS PLATE 6M598201 25.30

8 BRAKE DIAL RETAINER (B) 6J843301 2.20

9 BRAKE DIAL RETAINER (B) SC 6G939301 2.20

10 MAG HOLDER 6M162401 8.80

11 LS BEARING W (A) 63757411 1.10

12 LS BEARING W (B) 63757404 1.10

13 LS BEARING W (C) 6G185101 1.10

14 LS BALL BEARING 6G511506 15.40

15 LS BEARING RING 6F032201 2.20

16 SPOOL (16+17) 6M594601 60.50

17 SPOOL PIN 6J339401 2.20

18 FRAME 6M212307 34.10

19 FRONT COVER 6J956613 9.90

20 FRONT COVER SC 6H531508 2.20

21 CLUTCH LEVER 6J956101 9.90

22 CLUTCH LEVER PLATE (R) 6J955501 2.20

23 CLUTCH LEVER PLATE (L) 6J955601 2.20

24 OSCILLATING POST 6M134001 2.20

25 OSCILLATING POST RETAINER 6H704101 2.20

26 RS COVER PLATE 6J972901 2.20

27 CLUTCH CAM BALL BEARING 6G431008 15.40

28 KICK LEVER PLATE (A) 6J739101 3.30

29 KICK LEVER PLATE (A) SC 6H531508 2.20

30 KICK LEVER - SP 6J915201 2.20

31 KICK LEVER 6J622901 6.60

32 CLUTCH CAM PLATE 6J739001 2.20

33 CLUTCH CAM 6J972601 9.90

34 CLUTCH CAM PLATE SC-W 6M070001 1.10

35 CLUTCH CAM PLATE SC 6B360406 2.20

36 KICK LEVER PLATE (B) 6H659101 3.30

37 KICK LEVER PLATE (B) SC 6B032904 2.20

38 CLUTCH PLATE 6H929001 3.30

39 CLUTCH SP 6J313901 2.20

40 PINION + DRIVE GEAR SET 6Z027609 55.00

41 PINION RING 6H448401 2.20

42 PINION BALL BEARING 6G431107 15.40

43 RS PLATE 6M597701 35.20

44 MECHANICAL BRAKE KNOB O-RING 6J279701 1.10

45 MECHANICAL BRAKE KNOB W (A) 6J692001 1.10

46 MECHANICAL BRAKE KNOB W (B) 6B175503 1.10

47 MECHANICAL BRAKE KNOB 6M111901 7.70

49 RS PLATE SC 6G945806 2.20

50 WORM SHAFT RETAINER 63205901 2.20

51 WORM SHAFT W 6B411702 1.10

52 WORM SHAFT COLLAR 6G720001 2.20

53 LEVEL WINDING 6M470501 46.20

54 POLE 6J740101 3.30

55 POLE W 6M161301 1.10

56 POLE HOLDER PIN 6J740201 3.30

57 POLE HOLDER O-RING 6G252202 1.10

58 WORM SHIELD 6J740001 3.30

59 WORM SHAFT 6J912601 7.70

60 WORM SHAFT COLLAR 6G720001 2.20

61 WORM SHAFT GEAR 6J693901 3.30

62 WORM SHAFT GEAR RETAINER 6B339801 2.20

63 GEAR SHAFT W 6G099801 1.10

64 GEAR SHAFT RETAINER 63208002 2.20

66 GEAR SHAFT COLLAR 6F648301 4.40

67 GEAR SHAFT PLATE 6J693701 3.30

68 GEAR SHAFT PLATE SC 6G297002 2.20

69 WORM GEAR 6J693601 4.40

70 GEAR SHAFTS 6M308401 18.70

71 RATCHET 6H660901 3.30

72 DRIVE GEAR W 63746605 1.10

73 PINION + DRIVE GEAR SET 6Z027609 55.00

74 DRAG W 6H359002 6.60

75 DRAG COLLAR 6J740501 17.60

76 DRAG COLLAR SP 6M025201 2.20

77 DRAG COLLAR PIN 6J566201 2.20

78 DRAG COLLAR 6J327701 8.80

79 HANDLE BEARING W (A) 6B553803 1.10

80 ONE-WAY CLUTCH 6J540401 20.90

81 HANDLE BALL BEARING 6B861705 8.80

82 HANDLE BEARING W (B) 6B553801 1.10

83 DRAG HOLDER 6F028203 3.30

84 DRAG HOLDER LEAF SP 6F032401 2.20

85 DRAG SP・W 61508901 2.20

86 STAR DRAG W 6H929501 2.20

87 DRAG NUT 6J141001 7.70

88 DRAG NUT SP 6J011901 2.20

89 STAR DRAG 6J140005 27.50

90 HANDLE W 6M422101 1.10

91 HANDLE 6M595401 93.50

92 HANDLE NUT 6G793309 4.40

93 HANDLE CAP 6J625401 4.40

94 HANDLE CAP SC 6G835504 2.20

200 HANDLE KNOB W 6B411703 1.10

201 HANDLE KNOB COLLARS 6G720001 2.20

202 HANDLE KNOB 6H834201 15.40

203 HANDLE KNOB SC 6B679308 2.20

204 HANDLE KNOB CAP (WITH O-RING) 6M594801 12.10

205 HANDLE KNOB CAP O-RING 6H100001 1.10

[DAIWA] Genuine Spare Parts for 24 紅牙 KOHGA IC 200L Product code: 00631565 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T09:37:35+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

No. Part Name Part Code Price (USD)

1 RS PLATE 6M371003 30.80

2 IC MODULE SC 6H666003 2.20

3 IC MODULE SC・W 6B536104 1.10

4 IC MODULE 6M269403 115.50

5 RS SENSOR PLATE 6M370801 19.80

6 FRAME 6M370101 39.60

7 RS BEARING W (A) 63757404 1.10

8 RS BEARING W (B) 63757411 1.10

9 RS BEARING W (C) 6G185101 1.10

10 RS BALL BEARING 6G511506 15.40

11 RS BEARING RING 6F032201 2.20

12 SPOOL (12-14/117) 6M559201 72.60

13 SPOOL GEAR 6M026001 2.20

14 SPOOL PIN 6J252301 2.20

15 IC MODULE HOLD SEAL 6J619501 2.20

16 FINGER COVER 6M349903 12.10

17 FINGER COVER SC (A) 6H531509 2.20

18 FINGER COVER SC (B) 6H005701 2.20

19 RS PLATE SC 6J252301 2.20

20 SET PLATE 6J619501 2.20

21 SET PLATE PIN 6M349903 12.10

22 SET PLATE GEAR (A) 6H531509 2.20

23 SET PLATE GEAR (A) COLLAR 6H005701 2.20

24 SET PLATE GEAR (A) SC 6H472205 2.20

25 SET PLATE GEAR (B) BEARING 6G469001 15.40

26 SET PLATE GEAR (B) 6M023801 2.20

27 SET PLATE GEAR (B) SC 6H842806 2.20

28 SET PLATE GEAR (C) 6M023901 2.20

29 SET PLATE GEAR (C) SC 6M024001 2.20

30 WORM SHAFT RETAINER 63205901 2.20

31 WORM SHAFT BEARING W 6B411703 1.10

32 WORM SHAFT COLLAR 6G720001 2.20

33 LEVEL WINDING 6M357001 29.70

34 LEVEL WINDING PIN 6J740201 3.30

35 POLE 6J740101 3.30

36 POLE W 6G099801 1.10

37 POLE HOLDER O-RING 6G252202 1.10

38 WORM SHIELD 6M370601 13.20

39 WORM SHAFT 6M349201 12.10

40 WORM SHAFT COLLAR 6G720001 2.20

41 WORM SHAFT GEAR 6M023501 2.20

42 WORM SHAFT GEAR RETAINER 6B339801 2.20

43 OSCILLATING POST *Cannot be ordered 6M349501 2.20

44 CLUTCH LEVER PLATE (L) 6M348801 2.20

45 CLUTCH LEVER 6M349301 6.60

46 CLUTCH LEVER PLATE (R) 6M348901 2.20

47 SET PLATE SC 6B557613 2.20

48 CLUTCH CAM PLATE 6M090401 2.20

49 CLUTCH CAM PLATE SC 6H531508 2.20

50 CLUTCH CAM BALL BEARING 6G431008 15.40

51 CLUTCH CAM BEARING COLLAR 6M518401 7.70

54 CLUTCH CAM 6M370401 4.40

55 KICK LEVER SP 6J990401 2.20

56 KICK LEVER 6J990301 6.60

57 CLUTCH CAM W 6H159202 1.10

58 CLUTCH CAM SC 63522501 2.20

59 KICK LEVER PLATE (B) 6M044101 3.30

60 KICK LEVER PLATE (B) SC 6B032904 2.20

61 CLUTCH PLATE 6M106001 3.30

62 CLUTCH PLATE SP 6J142501 2.20

63 STOPPER PIN 6J946701 2.20

64 STOPPER 6H270401 8.80

65 PINION + DRIVE GEAR SET 6Z026912 82.50

66 LS PLATE 6M565601 39.60

67 PINION BALL BEARING (A) 6G467101 15.40

68 PINION BEARING COLLAR (A) *Cannot be ordered 6J953001 7.70

69 PINION BEARING COLLAR (B) 6M348501 7.70

70 PINION BEARING W 6G185101 1.10

71 PINION BALL BEARING (A) 6G511506 15.40

72 PINION BEARING RING 6F032201 2.20

73 LS PLATE SC (A) 6B557613 2.20

74 MECHANICAL BRAKE KNOB O-RING 6M150101 1.10

75 MECHANICAL BRAKE W (A) 6M412001 1.10

76 MECHANICAL BRAKE W (B) 6B175503 1.10

77 MECHANICAL BRAKE KNOB 6M348603 18.70

78 GEAR SHAFT W 6G099801 1.10

79 GEAR SHAFT RETAINER 63208002 2.20

80 GEAR SHAFT BALL BEARING 6G538007 15.40

81 GEAR SHAFT PLATE 6M040001 3.30

82 GEAR SHAFT PLATE SC 6E134514 2.20

83 GEAR SHAFTS 6M558902 22.00

84 GEAR SHAFT O-RING (A) 6H156901 1.10

85 RATCHET 6M045501 3.30

86 DRIVE GEAR W 6M085901 2.20

88 PINION + DRIVE GEAR SET 6Z026912 82.50

89 DRAG W SET (3 MAIYERS) 6M217501 39.60

90 DRAG DISK W 6H470904 2.20

91 DRAG GRIP W 6M046101 3.30

92 DRIVE COLLAR 6M046302 17.60

93 DRIVE COLLAR O-RING 6H452801 1.10

94 CLUTCH RING 6J327701 8.80

95 ONE-WAY CLUTCH 6G819801 20.90

96 HANDLE BALL BEARING 6G431008 15.40

97 CLUTCH RING W 6J640601 2.20

98 DRAG HOLDER COLLAR 6E253501 2.20

99 DRAG HOLDER 6E709201 3.30

100 DRAG HOLDER LEAF SPRING 6E715601 2.20

101 DRAG SP・W 61508901 2.20

102 STAR DRAG W 6H929501 2.20

103 STAR DRAG NUT 6J935104 7.70

104 STARDRAG SP 6J011901 2.20

105 STAR DRAG 6E721107 31.90

106 HANDLE W (A) 6J102801 1.10

107 HANDLE W (B) 6J101301 3.30

108 HANDLE W (A) 6M559501 198.00

109 HANDLE NUT 6J090311 4.40

110 HANDLE LOCK PLATE 6H283609 4.40

111 HANDLE LOCK PLATE SC 6G835502 3.30

112 BATTERY CAP (WITH O-RING) *Cannot be ordered 6Y658601 22.00

113 FRONT COVER 6M350003 9.90

114 FRONT COVER SC 6H531511 2.20

115 SPOOL SHAFT O-RING 6H770601 1.10

116 RS PLATE SC (B) 6B557614 2.20

117 GEAR SHAFT O-RING (B) 6F657801 1.10

200 MANUAL 6Y720601 2.20

201 MANUAL (COUNTER) 6Y720701 2.20

203 HANDLE KNOB W 6B411703 1.10

204 HANDLE KNOB COLOR 6G720001 2.20

205 HANDLE KNOB 6M452102 29.70

206 HANDLE KNOB SC 6B679308 2.20

207 HANDLE KNOB CAP 6Z027651 15.40

208 HANDLE KNOB CAP O-RING 6H100001 1.10

[DAIWA] Genuine Spare Parts for 24 紅牙 KOHGA IC 200 Product code: 00631564 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T09:35:53+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

No. Part Name Part Code Price (USD)

1 LS PLATE 6M350103 30.80

2 IC MODULE SC 6H666003 2.20

3 IC MODULE SC・W 6B536104 1.10

4 IC MODULE 6M269303 115.50

5 LS SENSOR PLATE 6M357201 19.80

6 FRAME 6M356701 39.60

7 LS BEARING W (A) 63757404 1.10

8 LS BEARING W (B) 63757411 1.10

9 LS BEARING W (C) 6G185101 1.10

10 LS BALL BEARING 6G511506 15.40

11 LS BEARING RING 6F032201 2.20

12 SPOOL (12-14/117) 6M559201 72.60

13 SPOOL GEAR 6M026001 2.20

14 SPOOL PIN 6J252301 2.20

15 IC MODULE HOLD SEAL 6J619501 2.20

16 FINGER COVER 6M349903 12.10

17 FINGER COVER SC (A) 6H531509 2.20

18 FINGER COVER SC (B) 6H005701 2.20

19 LS PLATE SC 6H005701 2.20

20 SET PLATE 6M349001 22.00

21 SET PLATE PIN 6M024101 2.20

22 SET PLATE GEAR (A) 6M023701 2.20

23 SET PLATE GEAR (A) COLLAR 6M023601 2.20

24 SET PLATE GEAR (A) SC 6H472205 2.20

25 SET PLATE GEAR (B) BEARING 6G469001 15.40

26 SET PLATE GEAR (B) 6M023801 2.20

27 SET PLATE GEAR (B) SC 6H842806 2.20

28 SET PLATE GEAR (C) 6M023901 2.20

29 SET PLATE GEAR (C) SC 6M024001 2.20

30 WORM SHAFT RETAINER 63205901 2.20

31 WORM SHAFT BEARING W 6B411703 1.10

32 WORM SHAFT COLLAR 6G720001 2.20

33 LEVEL WINDING 6M357001 29.70

34 LEVEL WINDING PIN 6J740201 3.30

35 POLE 6J740101 3.30

36 POLE W 6G099801 1.10

37 POLE HOLDER O-RING 6G252202 1.10

38 WORM SHIELD 6M349101 13.20

39 WORM SHAFT 6M349201 12.10

40 WORM SHAFT COLLAR 6G720001 2.20

41 WORM SHAFT GEAR 6M023501 2.20

42 WORM SHAFT GEAR RETAINER 6B339801 2.20

43 OSCILLATING POST *Cannot be ordered 6M349501 2.20

44 CLUTCH LEVER PLATE (R) 6M348801 2.20

45 CLUTCH LEVER 6M349301 6.60

46 CLUTCH LEVER PLATE (L) 6M348901 2.20

47 SET PLATE SC 6B557613 2.20

48 CLUTCH CAM PLATE 6M043701 2.20

49 CLUTCH CAM PLATE SC 6H531508 2.20

50 CLUTCH CAM BALL BEARING 6G431008 15.40

51 CLUTCH CAM BEARING COLLAR 6M518401 7.70

54 CLUTCH CAM 6M356801 4.40

55 KICK LEVER SP 6J933601 2.20

56 KICK LEVER 6J933201 6.60

57 CLUTCH CAM W 6H159202 1.10

58 CLUTCH CAM SC 63522501 2.20

59 KICK LEVER PLATE (B) 6M044101 3.30

60 KICK LEVER PLATE (B) SC 6B032904 2.20

61 CLUTCH PLATE 6M105701 3.30

62 CLUTCH PLATE SP 6J142501 2.20

63 STOPPER PIN 6J946701 2.20

64 STOPPER 6H270401 8.80

65 PINION + DRIVE GEAR SET 6Z026910 82.50

66 RS PLATE 6M565101 39.60

67 PINION BALL BEARING (A) 6G467101 15.40

68 PINION BEARING COLLAR (A) *Cannot be ordered 6J953001 7.70

69 PINION BEARING COLLAR (B) 6M348501 7.70

70 PINION BEARING W 6G185101 1.10

71 PINION BALL BEARING (A) 6G511506 15.40

72 PINION BEARING RING 6F032201 2.20

73 RS PLATE SC (A) 6B557613 2.20

74 MECHANICAL BRAKE KNOB O-RING 6M150101 1.10

75 MECHANICAL BRAKE W (A) 6M412001 1.10

76 MECHANICAL BRAKE W (B) 6B175503 1.10

77 MECHANICAL BRAKE KNOB 6M348603 18.70

78 GEAR SHAFT W 6G099801 1.10

79 GEAR SHAFT RETAINER 63208002 2.20

80 GEAR SHAFT BALL BEARING 6G538007 15.40

81 GEAR SHAFT PLATE 6M040001 3.30

82 GEAR SHAFT PLATE SC 6E134514 2.20

83 GEAR SHAFTS 6M558901 22.00

84 GEAR SHAFT O-RING (A) 6H156901 1.10

85 RATCHET 6M045501 3.30

86 DRIVE GEAR W 6M085901 2.20

88 PINION + DRIVE GEAR SET 6Z026910 82.50

89 DRAG W SET (3 MAIYERS) 6M217501 39.60

90 DRAG DISK W 6H470904 2.20

91 DRAG GRIP W 6M046101 3.30

92 DRIVE COLLAR 6M046302 17.60

93 DRIVE COLLAR O-RING 6H452801 1.10

94 CLUTCH RING 6J327701 8.80

95 ONE-WAY CLUTCH 6G819801 20.90

96 HANDLE BALL BEARING 6G431008 15.40

97 CLUTCH RING W 6J640601 2.20

98 DRAG HOLDER COLLAR 6E253501 2.20

99 DRAG HOLDER 6E709201 3.30

100 DRAG HOLDER LEAF SPRING 6E715601 2.20

101 DRAG SP・W 61508901 2.20

102 STAR DRAG W 6H929501 2.20

103 STAR DRAG NUT 6J935103 7.70

104 STARDRAG SP 6J011901 2.20

105 STAR DRAG 6E721107 31.90

106 HANDLE W (A) 6J102801 1.10

107 HANDLE W (B) 6J101301 3.30

108 HANDLE W (A) 6M559501 198.00

109 HANDLE NUT 6J090311 4.40

110 HANDLE LOCK PLATE 6H283609 4.40

111 HANDLE LOCK PLATE SC 6G835502 3.30

112 BATTERY CAP (WITH O-RING) *Cannot be ordered 6Y658601 22.00

113 FRONT COVER 6M350003 9.90

114 FRONT COVER SC 6H531511 2.20

115 SPOOL SHAFT O-RING 6H770601 1.10

116 RS PLATE SC (B) 6B557614 2.20

117 GEAR SHAFT O-RING (B) 6F657801 1.10

200 MANUAL 6Y720601 2.20

201 MANUAL (COUNTER) 6Y720701 2.20

203 HANDLE KNOB W 6B411703 1.10

204 HANDLE KNOB COLOR 6G720001 2.20

205 HANDLE KNOB 6M452102 29.70

206 HANDLE KNOB SC 6B679308 2.20

207 HANDLE KNOB CAP 6Z027651 15.40

208 HANDLE KNOB CAP O-RING 6H100001 1.10

[DAIWA] Genuine Spare Parts for 24 紅牙 KOHGA IC 200PL Product code: 00631563 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T09:33:05+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

No. Part Name Part Code Price (USD)

1 RS PLATE 6M371003 30.80

2 IC MODULE SC 6H666003 2.20

3 IC MODULE SC・W 6B536104 1.10

4 IC MODULE 6M269403 115.50

5 RS SENSOR PLATE 6M370801 19.80

6 FRAME 6M370101 39.60

7 RS BEARING W (A) 63757404 1.10

8 RS BEARING W (B) 63757411 1.10

9 RS BEARING W (C) 6G185101 1.10

10 RS BALL BEARING 6G511506 15.40

11 RS BEARING RING 6F032201 2.20

12 SPOOL (12-14/117) 6M559201 72.60

13 SPOOL GEAR 6M026001 2.20

14 SPOOL PIN 6J252301 2.20

15 IC MODULE HOLD SEAL 6J619501 2.20

16 FINGER COVER 6M349903 12.10

17 FINGER COVER SC (A) 6H531509 2.20

18 FINGER COVER SC (B) 6H005701 2.20

19 RS PLATE SC 6H005701 2.20

20 SET PLATE 6M370301 22.00

21 SET PLATE PIN 6M024101 2.20

22 SET PLATE GEAR (A) 6M023701 2.20

23 SET PLATE GEAR (A) COLLAR 6M023601 2.20

24 SET PLATE GEAR (A) SC 6H472205 2.20

25 SET PLATE GEAR (B) BEARING 6G469001 15.40

26 SET PLATE GEAR (B) 6M023801 2.20

27 SET PLATE GEAR (B) SC 6H842806 2.20

28 SET PLATE GEAR (C) 6M023901 2.20

29 SET PLATE GEAR (C) SC 6M024001 2.20

30 WORM SHAFT RETAINER 63205901 2.20

31 WORM SHAFT BEARING W 6B411702 1.10

32 WORM SHAFT COLLAR 6G720001 2.20

33 LEVEL WINDING 6M357001 29.70

34 LEVEL WINDING PIN 6J740201 3.30

35 POLE 6J740101 3.30

36 POLE W 6G099801 1.10

37 POLE HOLDER O-RING 6G252202 1.10

38 WORM SHIELD 6M370601 13.20

39 WORM SHAFT 6M349201 12.10

40 WORM SHAFT COLLAR 6G720001 2.20

41 WORM SHAFT GEAR 6M023501 2.20

42 WORM SHAFT GEAR RETAINER 6B339801 2.20

43 OSCILLATING POST *Cannot be ordered 6M349501 2.20

44 CLUTCH LEVER PLATE (L) 6M348801 2.20

45 CLUTCH LEVER 6M349301 6.60

46 CLUTCH LEVER PLATE (R) 6M348901 2.20

47 SET PLATE SC 6B557613 2.20

48 CLUTCH CAM PLATE 6M090401 2.20

49 CLUTCH CAM PLATE SC 6H531508 2.20

50 CLUTCH CAM BALL BEARING 6G431008 15.40

51 CLUTCH CAM BEARING COLLAR 6M518401 7.70

54 CLUTCH CAM 6M370401 4.40

55 KICK LEVER SP 6J990401 2.20

56 KICK LEVER 6J990301 6.60

57 CLUTCH CAM W 6H159202 1.10

58 CLUTCH CAM SC 63522501 2.20

59 KICK LEVER PLATE (B) 6M044101 3.30

60 KICK LEVER PLATE (B) SC 6B032904 2.20

61 CLUTCH PLATE 6M106001 3.30

62 CLUTCH PLATE SP 6J142501 2.20

63 STOPPER PIN 6J946701 2.20

64 STOPPER 6H270401 8.80

65 PINION + DRIVE GEAR SET 6Z027552 82.50

66 LS PLATE 6M565301 39.60

67 PINION BALL BEARING (A) 6G467101 15.40

68 PINION BEARING COLLAR (A) *Cannot be ordered 6J953001 7.70

69 PINION BEARING COLLAR (B) 6M348501 7.70

70 PINION BEARING W 6G185101 1.10

71 PINION BALL BEARING (A) 6G511506 15.40

72 PINION BEARING RING 6F032201 2.20

73 LS PLATE SC (A) 6B557613 2.20

74 MECHANICAL BRAKE KNOB O-RING 6M150101 1.10

75 MECHANICAL BRAKE W (A) 6M412001 1.10

76 MECHANICAL BRAKE W (B) 6B175503 1.10

77 MECHANICAL BRAKE KNOB 6M348603 18.70

78 GEAR SHAFT W 6G099801 1.10

79 GEAR SHAFT RETAINER 63208002 2.20

80 GEAR SHAFT BALL BEARING 6G538007 15.40

81 GEAR SHAFT PLATE 6M040001 3.30

82 GEAR SHAFT PLATE SC 6E134514 2.20

83 GEAR SHAFTS 6M558902 22.00

84 GEAR SHAFT O-RING (A) 6H156901 1.10

85 RATCHET 6M045501 3.30

86 DRIVE GEAR W 6M085901 2.20

88 PINION + DRIVE GEAR SET 6Z027552 82.50

89 DRAG W SET (3 MAIYERS) 6M217501 39.60

90 DRAG DISK W 6H470904 2.20

91 DRAG GRIP W 6M046101 3.30

92 DRIVE COLLAR 6M046302 17.60

93 DRIVE COLLAR O-RING 6H452801 1.10

94 CLUTCH RING 6J327701 8.80

95 ONE-WAY CLUTCH 6G819801 20.90

96 HANDLE BALL BEARING 6G431008 15.40

97 CLUTCH RING W 6J640601 2.20

98 DRAG HOLDER COLLAR 6E253501 2.20

99 DRAG HOLDER 6E709201 3.30

100 DRAG HOLDER LEAF SPRING 6E715601 2.20

101 DRAG SP・W 61508901 2.20

102 STAR DRAG W 6H929501 2.20

103 STAR DRAG NUT 6J935104 7.70

104 STARDRAG SP 6J011901 2.20

105 STAR DRAG 6E721107 31.90

106 HANDLE W (A) 6J102801 1.10

107 HANDLE W (B) 6J101301 3.30

108 HANDLE W (A) 6M559501 198.00

109 HANDLE NUT 6J090311 4.40

110 HANDLE LOCK PLATE 6H283609 4.40

111 HANDLE LOCK PLATE SC 6G835502 3.30

112 BATTERY CAP (WITH O-RING) *Cannot be ordered 6Y658601 22.00

113 FRONT COVER 6M350003 9.90

114 FRONT COVER SC 6H531511 2.20

115 SPOOL SHAFT O-RING 6H770601 1.10

116 LS PLATE SC (B) 6B557614 2.20

117 GEAR SHAFT O-RING (B) 6F657801 1.10

200 MANUAL 6Y720601 2.20

201 MANUAL (COUNTER) 6Y720701 2.20

203 HANDLE KNOB W 6B411703 1.10

204 HANDLE KNOB COLOR 6G720001 2.20

205 HANDLE KNOB 6M452102 29.70

206 HANDLE KNOB SC 6B679308 2.20

207 HANDLE KNOB CAP 6Z027651 15.40

208 HANDLE KNOB CAP O-RING 6H100001 1.10

[DAIWA] Genuine Spare Parts for 24 紅牙 KOHGA IC 200P Product code: 00631562 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T09:31:27+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

No. Part Name Part Code Price (USD)

1 LS PLATE 6M350103 30.80

2 IC MODULE SC 6H666003 2.20

3 IC MODULE SC・W 6B536104 1.10

4 IC MODULE 6M269303 115.50

5 LS SENSOR PLATE 6M357201 19.80

6 FRAME 6M356701 39.60

7 LS BEARING W (A) 63757404 1.10

8 LS BEARING W (B) 63757411 1.10

9 LS BEARING W (C) 6G185101 1.10

10 LS BALL BEARING 6G511506 15.40

11 LS BEARING RING 6F032201 2.20

12 SPOOL (12-14/117) 6M559201 72.60

13 SPOOL GEAR 6M026001 2.20

14 SPOOL PIN 6J252301 2.20

15 IC MODULE HOLD SEAL 6J619501 2.20

16 FINGER COVER 6M349903 12.10

17 FINGER COVER SC (A) 6H531509 2.20

18 FINGER COVER SC (B) 6H005701 2.20

19 LS PLATE SC 6H005701 2.20

20 SET PLATE 6M349001 22.00

21 SET PLATE PIN 6M024101 2.20

22 SET PLATE GEAR (A) 6M023701 2.20

23 SET PLATE GEAR (A) COLLAR 6M023601 2.20

24 SET PLATE GEAR (A) SC 6H472205 2.20

25 SET PLATE GEAR (B) BEARING 6G469001 15.40

26 SET PLATE GEAR (B) 6M023801 2.20

27 SET PLATE GEAR (B) SC 6H842806 2.20

28 SET PLATE GEAR (C) 6M023901 2.20

29 SET PLATE GEAR (C) SC 6M024001 2.20

30 WORM SHAFT RETAINER 63205901 2.20

31 WORM SHAFT BEARING W 6B411702 1.10

32 WORM SHAFT COLLAR 6G720001 2.20

33 LEVEL WINDING 6M357001 29.70

34 LEVEL WINDING PIN 6J740201 3.30

35 POLE 6J740101 3.30

36 POLE W 6G099801 1.10

37 POLE HOLDER O-RING 6G252202 1.10

38 WORM SHIELD 6M349101 13.20

39 WORM SHAFT 6M349201 12.10

40 WORM SHAFT COLLAR 6G720001 2.20

41 WORM SHAFT GEAR 6M023501 2.20

42 WORM SHAFT GEAR RETAINER 6B339801 2.20

43 OSCILLATING POST *Cannot be ordered 6M349501 2.20

44 CLUTCH LEVER PLATE (R) 6M348801 2.20

45 CLUTCH LEVER 6M349301 6.60

46 CLUTCH LEVER PLATE (L) 6M348901 2.20

47 SET PLATE SC 6B557613 2.20

48 CLUTCH CAM PLATE 6M043701 2.20

49 CLUTCH CAM PLATE SC 6H531508 2.20

50 CLUTCH CAM BALL BEARING 6G431008 15.40

51 CLUTCH CAM BEARING COLLAR 6M518401 7.70

54 CLUTCH CAM 6M356801 4.40

55 KICK LEVER SP 6J933601 2.20

56 KICK LEVER 6J933201 6.60

57 CLUTCH CAM W 6H159202 1.10

58 CLUTCH CAM SC 63522501 2.20

59 KICK LEVER PLATE (B) 6M044101 3.30

60 KICK LEVER PLATE (B) SC 6B032904 2.20

61 CLUTCH PLATE 6M105701 3.30

62 CLUTCH PLATE SP 6J142501 2.20

63 STOPPER PIN 6J946701 2.20

64 STOPPER 6H270401 8.80

65 PINION + DRIVE GEAR SET 6Z027537 82.50

66 RS PLATE 6M558801 39.60

67 PINION BALL BEARING (A) 6G467101 15.40

68 PINION BEARING COLLAR (A) *Cannot be ordered 6J953001 7.70

69 PINION BEARING COLLAR (B) 6M348501 7.70

70 PINION BEARING W 6G185101 1.10

71 PINION BALL BEARING (A) 6G511506 15.40

72 PINION BEARING RING 6F032201 2.20

73 RS PLATE SC (A) 6B557613 2.20

74 MECHANICAL BRAKE KNOB O-RING 6M150101 1.10

75 MECHANICAL BRAKE W (A) 6M412001 1.10

76 MECHANICAL BRAKE W (B) 6B175503 1.10

77 MECHANICAL BRAKE KNOB 6M348603 18.70

78 GEAR SHAFT W 6G099801 1.10

79 GEAR SHAFT RETAINER 63208002 2.20

80 GEAR SHAFT BALL BEARING 6G538007 15.40

81 GEAR SHAFT PLATE 6M040001 3.30

82 GEAR SHAFT PLATE SC 6E134514 2.20

83 GEAR SHAFTS 6M558901 22.00

84 GEAR SHAFT O-RING (A) 6H156901 1.10

85 RATCHET 6M045501 3.30

86 DRIVE GEAR W 6M085901 2.20

88 PINION + DRIVE GEAR SET 6Z027537 82.50

89 DRAG W SET (3 MAIYERS) 6M217501 39.60

90 DRAG DISK W 6H470904 2.20

91 DRAG GRIP W 6M046101 3.30

92 DRIVE COLLAR 6M046302 17.60

93 DRIVE COLLAR O-RING 6H452801 1.10

94 CLUTCH RING 6J327701 8.80

95 ONE-WAY CLUTCH 6G819801 20.90

96 HANDLE BALL BEARING 6G431008 15.40

97 CLUTCH RING W 6J640601 2.20

98 DRAG HOLDER COLLAR 6E253501 2.20

99 DRAG HOLDER 6E709201 3.30

100 DRAG HOLDER LEAF SPRING 6E715601 2.20

101 DRAG SP・W 61508901 2.20

102 STAR DRAG W 6H929501 2.20

103 STAR DRAG NUT 6J935103 7.70

104 STARDRAG SP 6J011901 2.20

105 STAR DRAG 6E721107 31.90

106 HANDLE W (A) 6J102801 1.10

107 HANDLE W (B) 6J101301 3.30

108 HANDLE W (A) 6M559501 198.00

109 HANDLE NUT 6J090311 4.40

110 HANDLE LOCK PLATE 6H283609 4.40

111 HANDLE LOCK PLATE SC 6G835502 3.30

112 BATTERY CAP (WITH O-RING) *Cannot be ordered 6Y658601 22.00

113 FRONT COVER 6M350003 9.90

114 FRONT COVER SC 6H531511 2.20

115 SPOOL SHAFT O-RING 6H770601 1.10

116 RS PLATE SC (B) 6B557614 2.20

117 GEAR SHAFT O-RING (B) 6F657801 1.10

200 MANUAL 6Y720601 2.20

201 MANUAL (COUNTER) 6Y720701 2.20

203 HANDLE KNOB W 6B411703 1.10

204 HANDLE KNOB COLOR 6G720001 2.20

205 HANDLE KNOB 6M452102 29.70

206 HANDLE KNOB SC 6B679308 2.20

207 HANDLE KNOB CAP 6Z027651 15.40

208 HANDLE KNOB CAP O-RING 6H100001 1.10

[DAIWA] Genuine Spare Parts for 24 TIERRA AIR IC 100XHL Product code: 00631561 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T09:26:04+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

No. Part Name Part Code Price (USD)

1 RS PLATE 6M570901 30.80

2 IC MODULE SC (A) 6H662205 2.20

3 IC MODULE SC (B) 6H662205 2.20

4 IC MODULE 6J851904 107.80

5 RS BEARING W (A) 63757406 1.10

6 RS BEARING W (B) 63757411 1.10

7 RS BEARING W (C) 63753003 1.10

8 RS BALL BEARING 6G431102 8.80

9 RS BEARING RETAINER 6E219701 2.20

10 SPOOL (10-12) 6M567401 49.50

11 SPOOL BALL BEARING 6G511506 15.40

12 SPOOL PIN 6J252301 2.20

13 FRAME 6J916801 30.80

14 IC MODULE HOLD SEAL 6J911901 2.20

15 FINGER COVER 6J913404 9.90

16 FINGER COVER SC (A) 6H881502 2.20

17 FINGER COVER SC (B) 6H881501 2.20

18 RS PLATE SC 6H005701 2.20

19 WORM SHAFT RETAINER 63205901 2.20

20 WORM SHAFT BEARING W 6B411703 1.10

21 WORM SHAFT BEARING 6G720001 2.20

22 LEVEL WINDING 6J912201 9.90

23 POLE 6J740201 3.30

24 POLE HOLDER PIN 6J740101 3.30

25 POLE W 6G099801 1.10

26 POLE HOLDER O-RING 6G252202 1.10

27 WORM SHIELD 6J917001 3.30

28 WORM SHAFT 6M567301 7.70

29 WORM SHAFT COLLAR 6G720001 2.20

30 WORM SHAFT GEAR 6J281401 4.40

31 WORM SHAFT GEAR RETAINER 6B339801 2.20

32 OSCILLATING POST 6J912401 2.20

33 FRONT COVER 6J913502 8.80

34 FRONT COVER SC 6H638404 2.20

35 CLUTCH LEVER 6M567101 6.60

36 CLUTCH LEVER PLATE (L) 6J738501 2.20

37 CLUTCH LEVER PLATE (R) 6J738401 2.20

38 CLUTCH BALL BEARING 6G431008 15.40

39 CLUTCH BALL BEARING COLLAR 6M518401 7.70

40 KICK LEVER PLATE (A) 6J765601 2.20

41 KICK LEVER PLATE (A) SP 6H928801 2.20

42 KICK LEVER PLATE (A) SC 6J055201 2.20

43 KICK LEVER PLATE (B) 6J765701 3.30

44 KICK LEVER PLATE (B) SC 6H881502 2.20

45 KICK LEVER SP 6J915301 2.20

46 KICK LEVER 6J638601 6.60

47 CLUTCH CAM PLATE 6J765302 9.90

48 CLUTCH CAM PLATE W 6H450701 1.10

49 CLUTCH CAM PLATE SC 6G939303 2.20

50 KICK LEVER PLATE (B) 6H659101 3.30

51 KICK LEVER PLATE (B) SC 6H581001 2.20

52 CLUTCH PLATE 6H944401 3.30

53 CLUTCH PLATE SP 6J313901 2.20

54 PINION + DRIVE GEAR SET 6Z025384 79.20

55 PINION BEARING RING 6H448401 2.20

56 PINION BALL BEARING 6G538003 15.40

57 PINION BEARING COLLAR *Cannot be ordered 6J724501 7.70

58 LS PLATE 6J916709 39.60

59 LS PLATE SC (A) *Not available 6H380403 2.20

60 LS PLATE SC (B) 6J255202 2.20

61 MECHANICAL BRAKE KNOB O-RING 6J279701 1.10

62 PINION SHAFT 6J198801 3.30

63 MECHANICAL BRAKE W (A) 6H161001 1.10

64 MECHANICAL BRAKE W (B) 6B175503 1.10

65 MECHANICAL BRAKE KNOB 6J911603 8.80

66 GEAR SHAFT W 6G099801 1.10

67 GEAR SHAFT RETAINER 63208002 2.20

68 GEAR SHAFT BALL BEARING 6G466201 15.40

69 GEAR SHAFT PLATE 6J281101 3.30

70 GEAR SHAFT PLATE SC 6G997301 2.20

71 WORM GEARS 6J281001 7.70

72 GEAR SHAFTS 6J912102 17.60

73 GEAR SHAFT O-RINGS 6F657801 1.10

74 RATCHET 6H660901 3.30

75 DRIVE GEAR W 63746605 1.10

76 PINION + DRIVE GEAR SET 6Z025384 79.20

77 DRAG W 6H359001 8.80

78 DRIVE COLLAR 6J443001 17.60

79 DRIVE COLLAR PIN 6J566201 2.20

80 DRIVE COLLAR SP 6M025201 2.20

81 DRIVE COLLAR O-RING 6J458101 1.10

82 CLUTCH RING 6J327701 8.80

83 ONE-WAY CLUTCH 6G819801 20.90

84 CLUTCH RING W 6B553801 1.10

85 HANDLE BALL BEARING 6G431008 15.40

86 HANDLE BALL BEARING W 6B553801 1.10

87 DRAG HOLDER 6F028203 3.30

88 DRAG HOLDER LEAF SP 6F032401 2.20

89 DRAG SP・W 61508901 2.20

90 DRAG NUT W 6H929501 2.20

91 DRAG NUT 6J141002 7.70

92 DRAG NUT SP 6J011901 2.20

93 STAR DRAG 6J140002 24.20

94 HANDLE W 6F576601 1.10

95 HANDLE W 6M570701 106.70

96 HANDLE NUT 6G793310 4.40

97 HANDLE LOCK PLATE 6J625401 4.40

98 HANDLE LOCK PLATE SC 6G835504 2.20

99 BATTERY CAP (WITH O-RING) *Cannot be ordered 6J737601 11.00

100 LS PLATE SC (C) 6H380404 2.20

101 SPOOL SHAFT O-RING 6H770601 1.10

201 HANDLE KNOB W 6B411703 1.10

202 HANDLE KNOB COLOR 6G720001 2.20

203 HANDLE KNOB 6H834201 15.40

204 HANDLE KNOB SC 6B679308 2.20

205 HANDLE KNOB CAP (WITH O-RING) 6Z021138 15.40

206 HANDLE KNOB CAP O-RING 6H100001 1.10

[DAIWA] Genuine Spare Parts for 24 TIERRA AIR IC 100XH Product code: 00631560 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T09:23:25+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

No. Part Name Part Code Price (USD)

1 LS PLATE 6M570801 30.80

2 IC MODULE SC (A) 6H662205 2.20

3 IC MODULE SC (B) 6H662205 2.20

4 IC MODULE 6J803504 107.80

5 LS BEARING W (A) 63757406 1.10

6 LS BEARING W (B) 63757411 1.10

7 LS BEARING W (C) 63753003 1.10

8 LS BALL BEARING 6G431102 8.80

9 LS BEARING RETAINER 6E219701 2.20

10 SPOOL (10-12) 6M567401 49.50

11 SPOOL BALL BEARING 6G511506 15.40

12 SPOOL PIN 6J252301 2.20

13 FRAME 6J911701 30.80

14 IC MODULE HOLD SEAL 6J911901 2.20

15 FINGER COVER 6J913404 9.90

16 FINGER COVER SC (A) 6H881502 2.20

17 FINGER COVER SC (B) 6H881501 2.20

18 LS PLATE SC 6H005701 2.20

19 WORM SHAFT RETAINER 63205901 2.20

20 WORM SHAFT BEARING W 6B411703 1.10

21 WORM SHAFT BEARING 6G720001 2.20

22 LEVEL WINDING 6J912201 9.90

23 POLE 6J740201 3.30

24 POLE HOLDER PIN 6J740101 3.30

25 POLE W 6G099801 1.10

26 POLE HOLDER O-RING 6G252202 1.10

27 WORM SHIELD 6J912701 3.30

28 WORM SHAFT 6M567301 7.70

29 WORM SHAFT COLLAR 6G720001 2.20

30 WORM SHAFT GEAR 6J281401 4.40

31 WORM SHAFT GEAR RETAINER 6B339801 2.20

32 OSCILLATING POST 6J912401 2.20

33 FRONT COVER 6J913502 8.80

34 FRONT COVER SC 6H638404 2.20

35 CLUTCH LEVER 6M567101 6.60

36 CLUTCH LEVER PLATE (R) 6J738401 2.20

37 CLUTCH LEVER PLATE (L) 6J738501 2.20

38 CLUTCH BALL BEARING 6G431008 15.40

39 CLUTCH BALL BEARING COLLAR 6M518401 7.70

40 KICK LEVER PLATE (A) 6J739001 2.20

41 KICK LEVER PLATE (A) SP 6H928801 2.20

42 KICK LEVER PLATE (A) SC 6J055201 2.20

43 KICK LEVER PLATE (B) 6J739101 3.30

44 KICK LEVER PLATE (B) SC 6H881502 2.20

45 KICK LEVER SP 6J915201 2.20

46 KICK LEVER 6J622901 6.60

47 CLUTCH CAM PLATE 6J738702 9.90

48 CLUTCH CAM PLATE W 6H450701 1.10

49 CLUTCH CAM PLATE SC 6G939303 2.20

50 KICK LEVER PLATE (B) 6H659101 3.30

51 KICK LEVER PLATE (B) SC 6H581001 2.20

52 CLUTCH PLATE 6H929001 3.30

53 CLUTCH PLATE SP 6J313901 2.20

54 PINION + DRIVE GEAR SET 6Z025383 79.20

55 PINION BEARING RING 6H448401 2.20

56 PINION BALL BEARING 6G538003 15.40

57 PINION BEARING COLLAR *Cannot be ordered 6J724501 7.70

58 RS PLATE 6J911509 39.60

59 RS PLATE SC (A) *Not available 6H380403 2.20

60 RS PLATE SC (B) 6J255202 2.20

61 MECHANICAL BRAKE KNOB O-RING 6J279701 1.10

62 PINION SHAFT 6J198801 3.30

63 MECHANICAL BRAKE W (A) 6H161001 1.10

64 MECHANICAL BRAKE W (B) 6B175503 1.10

65 MECHANICAL BRAKE KNOB 6J911603 8.80

66 GEAR SHAFT W 6G099801 1.10

67 GEAR SHAFT RETAINER 63208002 2.20

68 GEAR SHAFT BALL BEARING 6G466201 15.40

69 GEAR SHAFT PLATE 6J281101 3.30

70 GEAR SHAFT PLATE SC 6G997301 2.20

71 WORM GEARS 6J281001 7.70

72 GEAR SHAFTS 6J912101 17.60

73 GEAR SHAFT O-RINGS 6F657801 1.10

74 RATCHET 6H660901 3.30

75 DRIVE GEAR W 63746605 1.10

76 PINION + DRIVE GEAR SET 6Z025383 79.20

77 DRAG W 6H359001 8.80

78 DRIVE COLLAR 6J443001 17.60

79 DRIVE COLLAR PIN 6J055201 2.20

80 DRIVE COLLAR SP 6M025201 2.20

81 DRIVE COLLAR O-RING 6J458101 1.10

82 CLUTCH RING 6J327701 8.80

83 ONE-WAY CLUTCH 6G819801 20.90

84 CLUTCH RING W 6B553801 1.10

85 HANDLE BALL BEARING 6G431008 15.40

86 HANDLE BALL BEARING W 6B553801 1.10

87 DRAG HOLDER 6F028203 3.30

88 DRAG HOLDER LEAF SP 6F032401 2.20

89 DRAG SP・W 61508901 2.20

90 DRAG NUT W 6H929501 2.20

91 DRAG NUT 6J141001 7.70

92 DRAG NUT SP 6J011901 2.20

93 STAR DRAG 6J140002 24.20

94 HANDLE W 6F576601 1.10

95 HANDLE W 6M570701 106.70

96 HANDLE NUT 6G793309 4.40

97 HANDLE LOCK PLATE 6J625401 4.40

98 HANDLE LOCK PLATE SC 6G835504 2.20

99 BATTERY CAP (WITH O-RING) *Cannot be ordered 6J737601 11.00

100 RS PLATE SC (C) 6H380404 2.20

101 SPOOL SHAFT O-RING 6H770601 1.10

201 HANDLE KNOB W 6B411703 1.10

202 HANDLE KNOB COLOR 6G720001 2.20

203 HANDLE KNOB 6H834201 15.40

204 HANDLE KNOB SC 6B679308 2.20

205 HANDLE KNOB CAP (WITH O-RING) 6Z021138 15.40

206 HANDLE KNOB CAP O-RING 6H100001 1.10

[DAIWA] Genuine Spare Parts for 24 TIERRA AIR IC 100HL Product code: 00631559 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T09:21:48+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

No. Part Name Part Code Price (USD)

1 RS PLATE 6M570901 30.80

2 IC MODULE SC (A) 6H662205 2.20

3 IC MODULE SC (B) 6H662205 2.20

4 IC MODULE 6J851904 107.80

5 RS BEARING W (A) 63757406 1.10

6 RS BEARING W (B) 63757411 1.10

7 RS BEARING W (C) 63753003 1.10

8 RS BALL BEARING 6G431102 8.80

9 RS BEARING RETAINER 6E219701 2.20

10 SPOOL (10-12) 6M567401 49.50

11 SPOOL BALL BEARING 6G511506 15.40

12 SPOOL PIN 6J252301 2.20

13 FRAME 6J916801 30.80

14 IC MODULE HOLD SEAL 6J911901 2.20

15 FINGER COVER 6J913404 9.90

16 FINGER COVER SC (A) 6H881502 2.20

17 FINGER COVER SC (B) 6H881501 2.20

18 RS PLATE SC 6H005701 2.20

19 WORM SHAFT RETAINER 63205901 2.20

20 WORM SHAFT BEARING W 6B411703 1.10

21 WORM SHAFT BEARING 6G720001 2.20

22 LEVEL WINDING 6J912201 9.90

23 POLE 6J740201 3.30

24 POLE HOLDER PIN 6J740101 3.30

25 POLE W 6G099801 1.10

26 POLE HOLDER O-RING 6G252202 1.10

27 WORM SHIELD 6J917001 3.30

28 WORM SHAFT 6M567301 7.70

29 WORM SHAFT COLLAR 6G720001 2.20

30 WORM SHAFT GEAR 6J281401 4.40

31 WORM SHAFT GEAR RETAINER 6B339801 2.20

32 OSCILLATING POST 6J912401 2.20

33 FRONT COVER 6J913502 8.80

34 FRONT COVER SC 6H638404 2.20

35 CLUTCH LEVER 6M567101 6.60

36 CLUTCH LEVER PLATE (L) 6J738501 2.20

37 CLUTCH LEVER PLATE (R) 6J738401 2.20

38 CLUTCH BALL BEARING 6G431008 15.40

39 CLUTCH BALL BEARING COLLAR 6M518401 7.70

40 KICK LEVER PLATE (A) 6J765601 2.20

41 KICK LEVER PLATE (A) SP 6H928801 2.20

42 KICK LEVER PLATE (A) SC 6J055201 2.20

43 KICK LEVER PLATE (B) 6J765701 3.30

44 KICK LEVER PLATE (B) SC 6H881502 2.20

45 KICK LEVER SP 6J915301 2.20

46 KICK LEVER 6J638601 6.60

47 CLUTCH CAM PLATE 6J765302 9.90

48 CLUTCH CAM PLATE W 6H450701 1.10

49 CLUTCH CAM PLATE SC 6G939303 2.20

50 KICK LEVER PLATE (B) 6H659101 3.30

51 KICK LEVER PLATE (B) SC 6H581001 2.20

52 CLUTCH PLATE 6H944401 3.30

53 CLUTCH PLATE SP 6J313901 2.20

54 PINION + DRIVE GEAR SET 6Z026302 79.20

55 PINION BEARING RING 6H448401 2.20

56 PINION BALL BEARING 6G538003 15.40

57 PINION BEARING COLLAR *Cannot be ordered 6J724501 7.70

58 LS PLATE 6J916710 39.60

59 LS PLATE SC (A) *Not available 6H380403 2.20

60 LS PLATE SC (B) 6J255202 2.20

61 MECHANICAL BRAKE KNOB O-RING 6J279701 1.10

62 PINION SHAFT 6J198801 3.30

63 MECHANICAL BRAKE W (A) 6H161001 1.10

64 MECHANICAL BRAKE W (B) 6B175503 1.10

65 MECHANICAL BRAKE KNOB 6J911603 8.80

66 GEAR SHAFT W 6G099801 1.10

67 GEAR SHAFT RETAINER 63208002 2.20

68 GEAR SHAFT BALL BEARING 6G466201 15.40

69 GEAR SHAFT PLATE 6J281101 3.30

70 GEAR SHAFT PLATE SC 6G997301 2.20

71 WORM GEARS 6J281001 7.70

72 GEAR SHAFTS 6J912102 17.60

73 GEAR SHAFT O-RINGS 6F657801 1.10

74 RATCHET 6H660901 3.30

75 DRIVE GEAR W 63746605 1.10

76 PINION + DRIVE GEAR SET 6Z026302 79.20

77 DRAG W 6H359001 8.80

78 DRIVE COLLAR 6J443001 17.60

79 DRIVE COLLAR PIN 6J566201 2.20

80 DRIVE COLLAR SP 6M025201 2.20

81 DRIVE COLLAR O-RING 6J458101 1.10

82 CLUTCH RING 6J327701 8.80

83 ONE-WAY CLUTCH 6G819801 20.90

84 CLUTCH RING W 6B553801 1.10

85 HANDLE BALL BEARING 6G431008 15.40

86 HANDLE BALL BEARING W 6B553801 1.10

87 DRAG HOLDER 6F028203 3.30

88 DRAG HOLDER LEAF SP 6F032401 2.20

89 DRAG SP・W 61508901 2.20

90 DRAG NUT W 6H929501 2.20

91 DRAG NUT 6J141002 7.70

92 DRAG NUT SP 6J011901 2.20

93 STAR DRAG 6J140002 24.20

94 HANDLE W 6F576601 1.10

95 HANDLE W 6M570701 106.70

96 HANDLE NUT 6G793310 4.40

97 HANDLE LOCK PLATE 6J625401 4.40

98 HANDLE LOCK PLATE SC 6G835504 2.20

99 BATTERY CAP (WITH O-RING) *Cannot be ordered 6J737601 11.00

100 LS PLATE SC (C) 6H380404 2.20

101 SPOOL SHAFT O-RING 6H770601 1.10

201 HANDLE KNOB W 6B411703 1.10

202 HANDLE KNOB COLOR 6G720001 2.20

203 HANDLE KNOB 6H834201 15.40

204 HANDLE KNOB SC 6B679308 2.20

205 HANDLE KNOB CAP (WITH O-RING) 6Z021138 15.40

206 HANDLE KNOB CAP O-RING 6H100001 1.10

[DAIWA] Genuine Spare Parts for 24 TIERRA AIR IC 100H Product code: 00631558 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-20T09:19:15+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

No. Part Name Part Code Price (USD)

1 LS PLATE 6M570801 30.80

2 IC MODULE SC (A) 6H662205 2.20

3 IC MODULE SC (B) 6H662205 2.20

4 IC MODULE 6J803504 107.80

5 LS BEARING W (A) 63757406 1.10

6 LS BEARING W (B) 63757411 1.10

7 LS BEARING W (C) 63753003 1.10

8 LS BALL BEARING 6G431102 8.80

9 LS BEARING RETAINER 6E219701 2.20

10 SPOOL (10-12) 6M567401 49.50

11 SPOOL BALL BEARING 6G511506 15.40

12 SPOOL PIN 6J252301 2.20

13 FRAME 6J911701 30.80

14 IC MODULE HOLD SEAL 6J911901 2.20

15 FINGER COVER 6J913404 9.90

16 FINGER COVER SC (A) 6H881502 2.20

17 FINGER COVER SC (B) 6H881501 2.20

18 LS PLATE SC 6H005701 2.20

19 WORM SHAFT RETAINER 63205901 2.20

20 WORM SHAFT BEARING W 6B411703 1.10

21 WORM SHAFT BEARING 6G720001 2.20

22 LEVEL WINDING 6J912201 9.90

23 POLE 6J740201 3.30

24 POLE HOLDER PIN 6J740101 3.30

25 POLE W 6G099801 1.10

26 POLE HOLDER O-RING 6G252202 1.10

27 WORM SHIELD 6J912701 3.30

28 WORM SHAFT 6M567301 7.70

29 WORM SHAFT COLLAR 6G720001 2.20

30 WORM SHAFT GEAR 6J281401 4.40

31 WORM SHAFT GEAR RETAINER 6B339801 2.20

32 OSCILLATING POST 6J912401 2.20

33 FRONT COVER 6J913502 8.80

34 FRONT COVER SC 6H638404 2.20

35 CLUTCH LEVER 6M567101 6.60

36 CLUTCH LEVER PLATE (R) 6J738401 2.20

37 CLUTCH LEVER PLATE (L) 6J738501 2.20

38 CLUTCH BALL BEARING 6G431008 15.40

39 CLUTCH BALL BEARING COLLAR 6M518401 7.70

40 KICK LEVER PLATE (A) 6J739001 2.20

41 KICK LEVER PLATE (A) SP 6H928801 2.20

42 KICK LEVER PLATE (A) SC 6J055201 2.20

43 KICK LEVER PLATE (B) 6J739101 3.30

44 KICK LEVER PLATE (B) SC 6H881502 2.20

45 KICK LEVER SP 6J915201 2.20

46 KICK LEVER 6J622901 6.60

47 CLUTCH CAM PLATE 6J738702 9.90

48 CLUTCH CAM PLATE W 6H450701 1.10

49 CLUTCH CAM PLATE SC 6G939303 2.20

50 KICK LEVER PLATE (B) 6H659101 3.30

51 KICK LEVER PLATE (B) SC 6H581001 2.20

52 CLUTCH PLATE 6H929001 3.30

53 CLUTCH PLATE SP 6J313901 2.20

54 PINION + DRIVE GEAR SET 6Z026299 79.20

55 PINION BEARING RING 6H448401 2.20

56 PINION BALL BEARING 6G538003 15.40

57 PINION BEARING COLLAR *Cannot be ordered 6J724501 7.70

58 RS PLATE 6J911510 39.60

59 RS PLATE SC (A) *Not available 6H380403 2.20

60 RS PLATE SC (B) 6J255202 2.20

61 MECHANICAL BRAKE KNOB O-RING 6J279701 1.10

62 PINION SHAFT 6J198801 3.30

63 MECHANICAL BRAKE W (A) 6H161001 1.10

64 MECHANICAL BRAKE W (B) 6B175503 1.10

65 MECHANICAL BRAKE KNOB 6J911603 8.80

66 GEAR SHAFT W 6G099801 1.10

67 GEAR SHAFT RETAINER 63208002 2.20

68 GEAR SHAFT BALL BEARING 6G466201 15.40

69 GEAR SHAFT PLATE 6J281101 3.30

70 GEAR SHAFT PLATE SC 6G997301 2.20

71 WORM GEARS 6J281001 7.70

72 GEAR SHAFTS 6J912101 17.60

73 GEAR SHAFT O-RINGS 6F657801 1.10

74 RATCHET 6H660901 3.30

75 DRIVE GEAR W 63746605 1.10

76 PINION + DRIVE GEAR SET 6Z026299 79.20

77 DRAG W 6H359001 8.80

78 DRIVE COLLAR 6J443001 17.60

79 DRIVE COLLAR PIN 6J566201 2.20

80 DRIVE COLLAR SP 6M025201 2.20

81 DRIVE COLLAR O-RING 6J458101 1.10

82 CLUTCH RING 6J327701 8.80

83 ONE-WAY CLUTCH 6G819801 20.90

84 CLUTCH RING W 6B553801 1.10

85 HANDLE BALL BEARING 6G431008 15.40

86 HANDLE BALL BEARING W 6B553801 1.10

87 DRAG HOLDER 6F028203 3.30

88 DRAG HOLDER LEAF SP 6F032401 2.20

89 DRAG SP・W 61508901 2.20

90 DRAG NUT W 6H929501 2.20

91 DRAG NUT 6J141001 7.70

92 DRAG NUT SP 6J011901 2.20

93 STAR DRAG 6J140002 24.20

94 HANDLE W 6F576601 1.10

95 HANDLE W 6M570701 106.70

96 HANDLE NUT 6G793309 4.40

97 HANDLE LOCK PLATE 6J625401 4.40

98 HANDLE LOCK PLATE SC 6G835504 2.20

99 BATTERY CAP (WITH O-RING) *Cannot be ordered 6J737601 11.00

100 RS PLATE SC (C) 6H380404 2.20

101 SPOOL SHAFT O-RING 6H770601 1.10

201 HANDLE KNOB W 6B411703 1.10

202 HANDLE KNOB COLOR 6G720001 2.20

203 HANDLE KNOB 6H834201 15.40

204 HANDLE KNOB SC 6B679308 2.20

205 HANDLE KNOB CAP (WITH O-RING) 6Z021138 15.40

206 HANDLE KNOB CAP O-RING 6H100001 1.10

[ABU] Genuine Spare Parts for REDMAX FUNE-L Product code: 1286249 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-19T14:05:38+09:00

ATTENTION:

- An additional US$5.00 commission will be charged.
* Please select "+US$5.00 for Genuine Parts" for the commission in STEP 2 on the order screen.

- All back-ordered items require approximately 3 to 4 weeks to be prepared for shipment.

- We do not accept order cancellations, changes, or refunds after an order is placed. (This is because SHIMANO / DAIWA / ABU JAPAN do not accept cancellations.)

- Please note that this does not guarantee that the manufacturer has the item in stock.

- If the ordered part is not available from the manufacturer and the delivery date is undetermined, the order will be canceled.

- When ordering multiple parts, if some items are unavailable, only the parts that are in stock will be prepared and supplied.

* Please make sure to read the conditions carefully before placing your order.

In-Stock Abu Garcia Genuine Parts

By clicking the banner below, you can purchase Abu Garcia genuine spare parts that are currently in stock.

Reel Part's Schematic Diagram

Schematic
Number Part Number Part Name Price
(USD)

1 1302719 FRAME 22.00

2 1252051 THUMBAR 3.30

3 1127696 THUMBAR SHAFT 1.65

4 1124746 THUMBAR SCREW 0.55

5 1185895 LINE GUIDE 5.50

6 1185896 LINE GUIDE PIPE 3.30

7 1125805 WORM SHAFT 16.50

9 1125732 WORM SHAFT GEAR 1.10

10 1125733 WORM SHAFT PIN 0.55

11 1125734 WORM SHAFT PIN HOLDER 0.77

12 1185695 WORM SHAFT WASHER 1.76

13 1124201 RETAINER 0.55

14 1125799 LINE GUIDE SHAFT 1.65

15 1125806 PAWL 3.30

16 1125736 WASHER 0.55

17 1129323 LINE GUIDE NUT 0.77

18 1252052 FRONT COVER (K) 5.50

19 1185912 FRONT COVER SCREW 1.76

20 1127697 KICK LEVER 1.65

21 1252056 CLUTCH SPRING 1.76

22 1252058 LIFT CURVE 3.30

23 1252059 SCREW 1.76

24 1252061 KICK LEVER SPRING 1.76

25 1302704 MAIN GEAR SHAFT BUSHING 3.30

26 1252062 MAIN GEAR SHAFT PLATE 2.20

27 1125822 SCREW 0.55

28 1125747 WASHER 0.55

29 1125748 LEVEL WIND GEAR 1.10

30 1125749 WASHER 0.55

31 1196759 MAIN GEAR SHAFT 11.00

32 1144195 RATCHET 1.65

33 1281133 DRAG WASHER 2.75

34 1265571 MAIN GEAR 16.50

35 1190698 DRAG WASHER 1.76

36 1144201 PRESSURE WASHER 1.65

37 1118994 WASHER 0.55

38 1257782 SLEEVE 2.20

39 1127703 YOKE 1.10

40 1116237 YOKE SPRING 0.55

41 1200012 PINION GEAR(K) 11.00

42 1302720 GEAR SIDE PLATE 30.80

43 1125775 SPRING 0.55

44 1252073 CAM LOCK SCREW 2.20

45 1185714 O-RING 0.55

46 1185879 BUSHING 3.30

47 1104790 RING 0.55

50 1125829 FRICTION WASHER 0.55

51 1125828 RUBBER WASHER 0.55

53 1302712 BRAKE KNOB 11.00

54 1252078 SCREW 1.76

55 1252079 SCREW 1.76

56 1185916 RIGHT SIDE COVER SCREW 1.76

57 1252081 WASHER 1.76

59 1125780 CLICK SPRING 0.77

60 1117208 SPRING WASHER 0.55

61 1302721 STAR WHEEL 13.20

62 1117205 HANDLE WASHER 0.77

63 1302714 HANDLE 38.50

64 1127716 HANDLE NUT 1.10

65 1252091 HANDLE NUT COVER 3.30

66 1257783 SCREW 1.76

67 1187619 SPOOL SHAFT PIN 2.20

68 1187625 SPOOL BALL BEARING 8.80

69 1302715 SPOOL 16.50

70 1116222 MAGNET 2.20

71 1252095 MAGNET HOLDER 1.76

72 1252096 MAGNET PLATE 2.20

73 1187623 MAGNET HOLDER SPRING 1.76

74 1185770 SPOOL COVER SCREW 0.55

75 1125797 WASHER 0.55

76 1252097 BEARING HOUSING 11.00

77 1185923 SLIDE CAM 2.20

78 1252098 MAG DIAL 3.30

79 1252104 LEFT SIDE PLATE 16.50

80 1252105 LEFT SIDE TRIM 2.20

81 1302716 SPOOL COMPLETE (K) 33.00

82 1252115 LEFT SIDE COMPLETE 63.80

83 1252117 FLIPPING LEVER 2.20

84 1125827 BALL BEARING 6.60

85 1144194 STOPPER 9.90

86 1257068 SPOOL PLATE 3.30

87 1321185 HANDLE 22.00

88 1208088 BUSHING FOR BALL BEARING 2.20

89 1321186 HANDLE KNOB 7.70

90 1281320 SCREW 1.76

91 1321187 HANDLE KNOB CAP 6.60

* Items Marked “For Repair Use Only” Are Not Available for Individual Parts Sales

Order Flow

(STEP 1: Customer)
Please add the ordered parts from the parts list to your cart and complete the payment together with the Commission for [SHIMANO / DAIWA / ABU] Back-order Genuine Parts (US$5.00).
↓
(STEP 2: Our Shop)
We review your order details and place the order with the manufacturer.
↓
(STEP 3: Manufacturer)
Only for parts that are not in stock, we will receive a notification from the manufacturer approximately one week later.
Parts that are in stock will arrive at our shop in about one month.
* If all ordered parts are in stock, there will be no notification from the manufacturer or our shop until the shipment is dispatched. Please wait until shipping.
↓
(STEP 4: Our Shop)
Once the parts arrive from the manufacturer, we will dispatch your order.

* Please note that it generally takes about one month for genuine spare parts to arrive.
* If you order both back-ordered items and in-stock items together, they will be shipped together after all back-ordered items arrive.
* If you would like to receive in-stock items first, please place and pay for each order separately.

* The parts list pages will be expanded gradually.
If the parts list for your reel is not yet available, please place your order by manually entering the details using the order form below.

Genuine Spare Parts Order Form
https://www.hedgehog-studio.co.jp/form/parts

Regarding What You Can and Cannot Order for the Spare Parts

We source and provide genuine spare parts for SHIMANO / DAIWA / ABU reels only from the official Japanese websites listed below.
(We cannot assist with translating these websites. Please use Google Translate or other translation tools if necessary.)

| Parts that CANNOT be Ordered

- Spare parts for certain reel models (mainly older models) marked as “Unrepairable” on the SHIMANO website.

https://www.shimanofishingservice.jp/price.php

- Spare parts marked as “Just for Repair,” “Suspended,” or “Discontinued” on the DAIWA website.

http://www.sl-planets.co.jp/shop/c/

- Spare parts that do not have a part number or part code shown in the schematic diagrams on the SHIMANO / DAIWA websites.

- Spare parts marked as “For Repair Only” on the ABU website.

https://pfj-parts.com/
Please note that even for discontinued ABU reel models, parts may still be ordered if stock is available.

- Parts other than reel-related spare parts, such as rods or other fishing gear.

| Spare Spools, Bearings, and Other Tuning Parts Compatible with MAX FUNE Series Here!

[ABU] Genuine Spare Parts for REDMAX FUNE Product code: 1286248 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-19T14:05:38+09:00

ATTENTION:

- An additional US$5.00 commission will be charged.
* Please select "+US$5.00 for Genuine Parts" for the commission in STEP 2 on the order screen.

- All back-ordered items require approximately 3 to 4 weeks to be prepared for shipment.

- We do not accept order cancellations, changes, or refunds after an order is placed. (This is because SHIMANO / DAIWA / ABU JAPAN do not accept cancellations.)

- Please note that this does not guarantee that the manufacturer has the item in stock.

- If the ordered part is not available from the manufacturer and the delivery date is undetermined, the order will be canceled.

- When ordering multiple parts, if some items are unavailable, only the parts that are in stock will be prepared and supplied.

* Please make sure to read the conditions carefully before placing your order.

In-Stock Abu Garcia Genuine Parts

By clicking the banner below, you can purchase Abu Garcia genuine spare parts that are currently in stock.

Reel Part's Schematic Diagram

Schematic
Number Part Number Part Name Price
(USD)

1 1302710 FRAME 22.00

2 1252051 THUMBAR 3.30

3 1124745 THUMBAR SHAFT 1.65

4 1124746 THUMBAR SCREW 0.55

5 1185895 LINE GUIDE 5.50

6 1185896 LINE GUIDE PIPE 3.30

7 1125805 WORM SHAFT 16.50

9 1125732 WORM SHAFT GEAR 1.10

10 1125733 WORM SHAFT PIN 0.55

11 1125734 WORM SHAFT PIN HOLDER 0.77

12 1185695 WORM SHAFT WASHER 1.76

13 1124201 RETAINER 0.55

14 1125799 LINE GUIDE SHAFT 1.65

15 1125806 PAWL 3.30

16 1125736 WASHER 0.55

17 1129323 LINE GUIDE NUT 0.77

18 1252052 FRONT COVER (K) 5.50

19 1185912 FRONT COVER SCREW 1.76

20 1125740 KICK LEVER 1.65

21 1252054 CLUTCH SPRING 1.76

22 1252057 LIFT CURVE 3.30

23 1252059 SCREW 1.76

24 1252060 KICK LEVER SPRING 1.76

25 1302704 MAIN GEAR SHAFT BUSHING 3.30

26 1252062 MAIN GEAR SHAFT PLATE 2.20

27 1125822 SCREW 0.55

28 1125747 WASHER 0.55

29 1125748 LEVEL WIND GEAR 1.10

30 1125749 WASHER 0.55

31 1196748 MAIN GEAR SHAFT 11.00

32 1144195 RATCHET 1.65

33 1281133 DRAG WASHER 2.75

34 1214277 MAIN GEAR 16.50

35 1190698 DRAG WASHER 1.76

36 1144201 PRESSURE WASHER 1.65

37 1118994 WASHER 0.55

38 1257782 SLEEVE 2.20

39 1125753 YOKE 1.10

40 1116237 YOKE SPRING 0.55

41 1125809 PINION 7,1 11.00

42 1302711 GEAR SIDE PLATE 30.80

43 1125775 SPRING 0.55

44 1252073 CAM LOCK SCREW 2.20

45 1185714 O-RING 0.55

46 1185879 BUSHING 3.30

47 1104790 RING 0.55

50 1125829 FRICTION WASHER 0.55

51 1125828 RUBBER WASHER 0.55

53 1302712 BRAKE KNOB 11.00

54 1252078 SCREW 1.76

55 1252079 SCREW 1.76

56 1185916 RIGHT SIDE COVER SCREW 1.76

57 1252081 WASHER 1.76

59 1125780 CLICK SPRING 0.77

60 1117208 SPRING WASHER 0.55

61 1302713 STAR WHEEL 13.20

62 1117205 HANDLE WASHER 0.77

63 1302714 HANDLE 38.50

64 1125785 HANDLE NUT 1.10

65 1252091 HANDLE NUT COVER 3.30

66 1257783 SCREW 1.76

67 1187619 SPOOL SHAFT PIN 2.20

68 1187625 SPOOL BALL BEARING 8.80

69 1302715 SPOOL 16.50

70 1116222 MAGNET 2.20

71 1252095 MAGNET HOLDER 1.76

72 1252096 MAGNET PLATE 2.20

73 1187623 MAGNET HOLDER SPRING 1.76

74 1185770 SPOOL COVER SCREW 0.55

75 1125797 WASHER 0.55

76 1252097 BEARING HOUSING 11.00

77 1185923 SLIDE CAM 2.20

78 1252098 MAG DIAL 3.30

79 1252101 LEFT SIDE PLATE 16.50

80 1252105 LEFT SIDE TRIM 2.20

81 1302716 SPOOL COMPLETE (K) 33.00

82 1252112 LEFT SIDE COMPLETE 63.80

83 1252116 FLIPPING LEVER 2.20

84 1125827 BALL BEARING 6.60

85 1144194 STOPPER 9.90

86 1257068 SPOOL PLATE 3.30

87 1321185 HANDLE 22.00

88 1208088 BUSHING FOR BALL BEARING 2.20

89 1321186 HANDLE KNOB 7.70

90 1281320 SCREW 1.76

91 1321187 HANDLE KNOB CAP 6.60

* Items Marked “For Repair Use Only” Are Not Available for Individual Parts Sales

Order Flow

(STEP 1: Customer)
Please add the ordered parts from the parts list to your cart and complete the payment together with the Commission for [SHIMANO / DAIWA / ABU] Back-order Genuine Parts (US$5.00).
↓
(STEP 2: Our Shop)
We review your order details and place the order with the manufacturer.
↓
(STEP 3: Manufacturer)
Only for parts that are not in stock, we will receive a notification from the manufacturer approximately one week later.
Parts that are in stock will arrive at our shop in about one month.
* If all ordered parts are in stock, there will be no notification from the manufacturer or our shop until the shipment is dispatched. Please wait until shipping.
↓
(STEP 4: Our Shop)
Once the parts arrive from the manufacturer, we will dispatch your order.

* Please note that it generally takes about one month for genuine spare parts to arrive.
* If you order both back-ordered items and in-stock items together, they will be shipped together after all back-ordered items arrive.
* If you would like to receive in-stock items first, please place and pay for each order separately.

* The parts list pages will be expanded gradually.
If the parts list for your reel is not yet available, please place your order by manually entering the details using the order form below.

Genuine Spare Parts Order Form
https://www.hedgehog-studio.co.jp/form/parts

Regarding What You Can and Cannot Order for the Spare Parts

We source and provide genuine spare parts for SHIMANO / DAIWA / ABU reels only from the official Japanese websites listed below.
(We cannot assist with translating these websites. Please use Google Translate or other translation tools if necessary.)

| Parts that CANNOT be Ordered

- Spare parts for certain reel models (mainly older models) marked as “Unrepairable” on the SHIMANO website.

https://www.shimanofishingservice.jp/price.php

- Spare parts marked as “Just for Repair,” “Suspended,” or “Discontinued” on the DAIWA website.

http://www.sl-planets.co.jp/shop/c/

- Spare parts that do not have a part number or part code shown in the schematic diagrams on the SHIMANO / DAIWA websites.

- Spare parts marked as “For Repair Only” on the ABU website.

https://pfj-parts.com/
Please note that even for discontinued ABU reel models, parts may still be ordered if stock is available.

- Parts other than reel-related spare parts, such as rods or other fishing gear.

| Spare Spools, Bearings, and Other Tuning Parts Compatible with MAX FUNE Series Here!

[ABU] Genuine Spare Parts for 2017 REDMAX FUNE 3-L Product code: 1418229 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-19T13:42:27+09:00

ATTENTION:

- An additional US$5.00 commission will be charged.
* Please select "+US$5.00 for Genuine Parts" for the commission in STEP 2 on the order screen.

- All back-ordered items require approximately 3 to 4 weeks to be prepared for shipment.

- We do not accept order cancellations, changes, or refunds after an order is placed. (This is because SHIMANO / DAIWA / ABU JAPAN do not accept cancellations.)

- Please note that this does not guarantee that the manufacturer has the item in stock.

- If the ordered part is not available from the manufacturer and the delivery date is undetermined, the order will be canceled.

- When ordering multiple parts, if some items are unavailable, only the parts that are in stock will be prepared and supplied.

* Please make sure to read the conditions carefully before placing your order.

In-Stock Abu Garcia Genuine Parts

By clicking the banner below, you can purchase Abu Garcia genuine spare parts that are currently in stock.

Reel Part's Schematic Diagram

Schematic
Number Part Number Part Name Price
(USD)

1 1441782 FRAME 55.00

2 1281152 LINE GUIDE 5.50

3 1280905 LEVEL WIND TUBE 3.30

4 1280906 WORM SHAFT 16.50

5 1313502 WORM SHAFT BUSHING 2.20

6 1125732 WORM SHAFT GEAR 1.10

7 1125733 WORM SHAFT PIN 0.55

8 1313359 WORM SHAFT PIN HOLDER 2.20

9 1185695 WORM SHAFT WASHER 1.76

10 1124201 RETAINER 0.55

11 1280907 LINE GUIDE SHAFT 3.30

12 1125806 PAWL 3.30

13 1125736 WASHER 0.55

14 1129323 LINE GUIDE NUT 0.77

15 1380574 FRONT COVER 5.50

16 1185912 FRONT COVER SCREW 1.76

17 1289971 KICK LEVER 3.30

18 1127701 KICK LEVER SPRING 0.55

19 1380547 CLUTCH SPRING 2.20

20 1380548 LIFT CURVE 3.30

21 1380526 LIFT CURVE PLATE 3.30

22 1116183 SCREW 0.55

23 1252059 SCREW 1.76

24 1380575 THUMB BAR 3.30

25 1252077 SCREW 1.76

26 1124201 RETAINER 0.55

27 1380528 WASHER 2.20

28 1116186 BALL BEARING 6.60

29 1380529 MAIN GEAR SHAFT PLATE 3.30

30 1144221 SCREW 1.76

31 1380530 WASHER 2.20

32 1251634 LEVEL WIND GEAR 1.76

33 1415576 MAIN GEAR SHAFT 11.00

34 1144195 RATCHET 1.65

35 1281133 DRAG WASHER 2.75

36 1265571 MAIN GEAR 16.50

37 1190698 DRAG WASHER 1.76

40 1144201 PRESSURE WASHER 1.65

42 1257782 SLEEVE 2.20

43 1380567 SPEED CLUTCH BUTTON 3.30

44 1127703 YOKE 1.10

45 1116237 YOKE SPRING 0.55

46 1200012 PINION GEAR(K) 11.00

47 1313475 LOCK PIN 2.20

48 1116226 RETAINER 0.55

49 1313476 SPRING 2.20

50 1306819 ONE WAY CLUTCH 11.00

51 1441783 GEAR SIDE PLATE 22.00

52 1185714 O-RING 0.55

53 1185879 BUSHING 3.30

54 1104790 RING 0.55

57 1125829 FRICTION WASHER 0.55

58 1125828 RUBBER WASHER 0.55

60 1441776 BRAKE KNOB 11.00

61 1257016 SCREW 1.76

63 1252079 SCREW 1.76

64 1252079 SCREW 1.76

65 1252081 WASHER 1.76

68 1117208 SPRING WASHER 0.55

69 1380551 STAR WHEEL 13.20

70 1117205 HANDLE WASHER 0.77

71 1441777 HANDLE 38.50

72 1208088 BUSHING FOR BALL BEARING 2.20

73 1321186 HANDLE KNOB 7.70

74 1208088 BUSHING FOR BALL BEARING 2.20

75 1281320 SCREW 1.76

76 1321187 HANDLE KNOB CAP 6.60

77 1203418 HANDLE NUT 2.20

78 1415701 HANDLE NUT COVER 2.20

79 1203262 SCREW 2.20

80 1441778 SPOOL 16.50

81 1187625 SPOOL BALL BEARING 8.80

82 1187619 SPOOL SHAFT PIN 2.20

84 1380552 PALM SIDE PLATE 22.00

85 1380540 MAG DIAL 3.30

86 1125791 CLICK SPRING 1.10

87 1185923 SLIDE CAM 2.20

88 1380541 BEARING HOUSING 16.50

89 1187623 MAGNET HOLDER SPRING 1.76

90 1252096 MAGNET PLATE 2.20

91 1252095 MAGNET HOLDER 1.76

92 1116222 MAGNET 2.20

93 1185770 SPOOL COVER SCREW 0.55

94 1125797 WASHER 0.55

95 1125827 BALL BEARING 6.60

96 1104790 RING 0.55

100 1441784 GEAR SIDE COMPLETE 30.80

101 1441780 HANDLE COMPLETE 55.00

102 1441781 SPOOL COMPLETE 33.00

103 1380554 PALM SIDE COMPLETE 71.50

104 1144194 STOPPER 9.90

* Items Marked “For Repair Use Only” Are Not Available for Individual Parts Sales

Order Flow

(STEP 1: Customer)
Please add the ordered parts from the parts list to your cart and complete the payment together with the Commission for [SHIMANO / DAIWA / ABU] Back-order Genuine Parts (US$5.00).
↓
(STEP 2: Our Shop)
We review your order details and place the order with the manufacturer.
↓
(STEP 3: Manufacturer)
Only for parts that are not in stock, we will receive a notification from the manufacturer approximately one week later.
Parts that are in stock will arrive at our shop in about one month.
* If all ordered parts are in stock, there will be no notification from the manufacturer or our shop until the shipment is dispatched. Please wait until shipping.
↓
(STEP 4: Our Shop)
Once the parts arrive from the manufacturer, we will dispatch your order.

* Please note that it generally takes about one month for genuine spare parts to arrive.
* If you order both back-ordered items and in-stock items together, they will be shipped together after all back-ordered items arrive.
* If you would like to receive in-stock items first, please place and pay for each order separately.

* The parts list pages will be expanded gradually.
If the parts list for your reel is not yet available, please place your order by manually entering the details using the order form below.

Genuine Spare Parts Order Form
https://www.hedgehog-studio.co.jp/form/parts

Regarding What You Can and Cannot Order for the Spare Parts

We source and provide genuine spare parts for SHIMANO / DAIWA / ABU reels only from the official Japanese websites listed below.
(We cannot assist with translating these websites. Please use Google Translate or other translation tools if necessary.)

| Parts that CANNOT be Ordered

- Spare parts for certain reel models (mainly older models) marked as “Unrepairable” on the SHIMANO website.

https://www.shimanofishingservice.jp/price.php

- Spare parts marked as “Just for Repair,” “Suspended,” or “Discontinued” on the DAIWA website.

http://www.sl-planets.co.jp/shop/c/

- Spare parts that do not have a part number or part code shown in the schematic diagrams on the SHIMANO / DAIWA websites.

- Spare parts marked as “For Repair Only” on the ABU website.

https://pfj-parts.com/
Please note that even for discontinued ABU reel models, parts may still be ordered if stock is available.

- Parts other than reel-related spare parts, such as rods or other fishing gear.

| Spare Spools, Bearings, and Other Tuning Parts Compatible with MAX FUNE Series Here!

[ABU] Genuine Spare Parts for 2017 REDMAX FUNE 3 Product code: 1418228 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-19T13:42:27+09:00

ATTENTION:

- An additional US$5.00 commission will be charged.
* Please select "+US$5.00 for Genuine Parts" for the commission in STEP 2 on the order screen.

- All back-ordered items require approximately 3 to 4 weeks to be prepared for shipment.

- We do not accept order cancellations, changes, or refunds after an order is placed. (This is because SHIMANO / DAIWA / ABU JAPAN do not accept cancellations.)

- Please note that this does not guarantee that the manufacturer has the item in stock.

- If the ordered part is not available from the manufacturer and the delivery date is undetermined, the order will be canceled.

- When ordering multiple parts, if some items are unavailable, only the parts that are in stock will be prepared and supplied.

* Please make sure to read the conditions carefully before placing your order.

In-Stock Abu Garcia Genuine Parts

By clicking the banner below, you can purchase Abu Garcia genuine spare parts that are currently in stock.

Reel Part's Schematic Diagram

Schematic
Number Part Number Part Name Price
(USD)

1 1441774 FRAME 55.00

2 1281152 LINE GUIDE 5.50

3 1280905 LEVEL WIND TUBE 3.30

4 1280906 WORM SHAFT 16.50

5 1313502 WORM SHAFT BUSHING 2.20

6 1125732 WORM SHAFT GEAR 1.10

7 1125733 WORM SHAFT PIN 0.55

8 1313359 WORM SHAFT PIN HOLDER 2.20

9 1185695 WORM SHAFT WASHER 1.76

10 1124201 RETAINER 0.55

11 1280907 LINE GUIDE SHAFT 3.30

12 1125806 PAWL 3.30

13 1125736 WASHER 0.55

14 1129323 LINE GUIDE NUT 0.77

15 1380574 FRONT COVER 5.50

16 1185912 FRONT COVER SCREW 1.76

17 1289969 KICK LEVER 3.30

18 1125745 KICK LEVER SPRING 0.55

19 1380524 CLUTCH SPRING 2.20

20 1380525 LIFT CURVE 3.30

21 1380526 LIFT CURVE PLATE 3.30

22 1116183 SCREW 0.55

23 1252059 SCREW 1.76

24 1380575 THUMB BAR 3.30

25 1252077 SCREW 1.76

26 1124201 RETAINER 0.55

27 1380528 WASHER 2.20

28 1116186 BALL BEARING 6.60

29 1380529 MAIN GEAR SHAFT PLATE 3.30

30 1144221 SCREW 1.76

31 1380530 WASHER 2.20

32 1251634 LEVEL WIND GEAR 1.76

33 1415560 MAIN GEAR SHAFT 11.00

34 1144195 RATCHET 1.65

35 1281133 DRAG WASHER 2.75

36 1214277 MAIN GEAR 16.50

37 1190698 DRAG WASHER 1.76

40 1144201 PRESSURE WASHER 1.65

42 1257782 SLEEVE 2.20

43 1380556 SPEED CLUTCH BUTTON 3.30

44 1127753 YOKE 2.20

45 1116237 YOKE SPRING 0.55

46 1125809 PINION 7,1 11.00

47 1313475 LOCK PIN 2.20

48 1116226 RETAINER 0.55

49 1313476 SPRING 2.20

50 1306819 ONE WAY CLUTCH 11.00

51 1441775 GEAR SIDE PLATE 22.00

52 1185714 O-RING 0.55

53 1185879 BUSHING 3.30

54 1104790 RING 0.55

57 1125829 FRICTION WASHER 0.55

58 1125828 RUBBER WASHER 0.55

60 1441776 BRAKE KNOB 11.00

61 1257016 SCREW 1.76

63 1252079 SCREW 1.76

64 1252079 SCREW 1.76

65 1252081 WASHER 1.76

68 1117208 SPRING WASHER 0.55

69 1380535 STAR WHEEL 13.20

70 1117205 HANDLE WASHER 0.77

71 1441777 HANDLE 38.50

72 1208088 BUSHING FOR BALL BEARING 2.20

73 1321186 HANDLE KNOB 7.70

74 1208088 BUSHING FOR BALL BEARING 2.20

75 1281320 SCREW 1.76

76 1321187 HANDLE KNOB CAP 6.60

77 1203392 HANDLE NUT 2.20

78 1415701 HANDLE NUT COVER 2.20

79 1203262 SCREW 2.20

80 1441778 SPOOL 16.50

81 1187625 SPOOL BALL BEARING 8.80

82 1187619 SPOOL SHAFT PIN 2.20

84 1380539 PALM SIDE PLATE 22.00

85 1380540 MAG DIAL 3.30

86 1125791 CLICK SPRING 1.10

87 1185923 SLIDE CAM 2.20

88 1380541 BEARING HOUSING 16.50

89 1187623 MAGNET HOLDER SPRING 1.76

90 1252096 MAGNET PLATE 2.20

91 1252095 MAGNET HOLDER 1.76

92 1116222 MAGNET 2.20

93 1185770 SPOOL COVER SCREW 0.55

94 1125797 WASHER 0.55

95 1125827 BALL BEARING 6.60

96 1104790 RING 0.55

100 1441779 GEAR SIDE COMPLETE 30.80

101 1441780 HANDLE COMPLETE 55.00

102 1441781 SPOOL COMPLETE 33.00

103 1380545 PALM SIDE COMPLETE 71.50

104 1144194 STOPPER 9.90

* Items Marked “For Repair Use Only” Are Not Available for Individual Parts Sales

Order Flow

(STEP 1: Customer)
Please add the ordered parts from the parts list to your cart and complete the payment together with the Commission for [SHIMANO / DAIWA / ABU] Back-order Genuine Parts (US$5.00).
↓
(STEP 2: Our Shop)
We review your order details and place the order with the manufacturer.
↓
(STEP 3: Manufacturer)
Only for parts that are not in stock, we will receive a notification from the manufacturer approximately one week later.
Parts that are in stock will arrive at our shop in about one month.
* If all ordered parts are in stock, there will be no notification from the manufacturer or our shop until the shipment is dispatched. Please wait until shipping.
↓
(STEP 4: Our Shop)
Once the parts arrive from the manufacturer, we will dispatch your order.

* Please note that it generally takes about one month for genuine spare parts to arrive.
* If you order both back-ordered items and in-stock items together, they will be shipped together after all back-ordered items arrive.
* If you would like to receive in-stock items first, please place and pay for each order separately.

* The parts list pages will be expanded gradually.
If the parts list for your reel is not yet available, please place your order by manually entering the details using the order form below.

Genuine Spare Parts Order Form
https://www.hedgehog-studio.co.jp/form/parts

Regarding What You Can and Cannot Order for the Spare Parts

We source and provide genuine spare parts for SHIMANO / DAIWA / ABU reels only from the official Japanese websites listed below.
(We cannot assist with translating these websites. Please use Google Translate or other translation tools if necessary.)

| Parts that CANNOT be Ordered

- Spare parts for certain reel models (mainly older models) marked as “Unrepairable” on the SHIMANO website.

https://www.shimanofishingservice.jp/price.php

- Spare parts marked as “Just for Repair,” “Suspended,” or “Discontinued” on the DAIWA website.

http://www.sl-planets.co.jp/shop/c/

- Spare parts that do not have a part number or part code shown in the schematic diagrams on the SHIMANO / DAIWA websites.

- Spare parts marked as “For Repair Only” on the ABU website.

https://pfj-parts.com/
Please note that even for discontinued ABU reel models, parts may still be ordered if stock is available.

- Parts other than reel-related spare parts, such as rods or other fishing gear.

| Spare Spools, Bearings, and Other Tuning Parts Compatible with MAX FUNE Series Here!

Reserved Item for Genuine Product (667)

HEDGEHOG STUDIO — 2026-08-19T13:39:30+09:00

Reserved Items

for ( WILLIAM )

[REVIVE] INERTIA Carbon Handle [R-IN92SH, R-IN92AD]

HEDGEHOG STUDIO — 2026-08-19T11:31:35+09:00

Description

The original carbon handle with round knob "INERTIA" debuts for resale from REVIVE!

Efficient use of the moment of inertia realizes stability during retrieval and improvement of high take-up torque.
Supports a wide range from moving lures to shooting objects. Inertia, which is also highly praised by Lake Biwa professional guide Shinji Sato, has been completely revived.

From the REVIVE model, 4 rust-proof knob bearings are standard equipment and upgraded.
The lightness and smoothness of unwinding are dramatically improved.

Spec

Handle length：92mm
Weight：37g

Color

RED
BLUE
PURPLE
SILVER
GOLD
BLACK (NEW COLOR)
DARK GREEN (Limited Color)

[LEVITATION ENGINEERING] Tuning Line Roller for SHIMANO

HEDGEHOG STUDIO — 2026-08-19T10:38:08+09:00

Product Description

This tuning line roller for SHIMANO is developed for light lines.

It is precision-machined from high-hardness materials used in the aerospace industry to achieve exceptional sensitivity.
The outer surface of the line roller is buffed and fully anodized to a mirror-like finish, making it gentle on the line even under high load.
The proprietary design optimizes weight balance, eliminating rotor wobble during reeling.
The design ensures the line stays in a constant position during retrieval, resulting in smooth winding on the spool and improved casting distance.
The bearing mount precision is maximized to achieve unparalleled sensitivity and rotational performance.

- Enhanced sensitivity due to high-hardness materials
- Improved accuracy of bearing mount and concentricity, minimizing play
- Approximately 20% reduction in line roller weight
- R-shaped groove to fit the line perfectly
- Dedicated mounting screw to reduce rotor wobble

The product was developed with a focus on these concepts.

Color Lineup

From left to right: Black, Gunmetal, Dark Gunmetal, Purple, Pink, Blue, Orange Gold, Blue Green

Compatible Models

- 14, 18, 22 STELLA
- 15, 20, 24 TWIN POWER
- 19, 23 Vanquish, VANFORD, STRADIC, SoaRe, Sephia, COMPLEX
- CARDIFF
Compatible with other models if the size fits.

Contents

Shims x 3, Bearing x 2, Line Roller x 1, Dedicated Screw×1 x 1, Hex Wrench x 1

| Customize Your Line Roller With 2BB Tuning Or Add Stylish Screws!
  Check Out The Spinning Reel-Specific Parts Collection Here!

*SPLN

[KOMAYA] KOMAYA Drag (Drag Washer, Oil) *CPDW

HEDGEHOG STUDIO — 2026-08-19T10:38:08+09:00

*Drag washers and drag oil are sold separately and are not available as a set.

| Product Description

Experience the wonder of an unbreakable thread with KOMAYA Drag!
Our drag improves the smoothness of line release and reduces the strain on your line!

Due to its low stretch properties, it compensates for the weakness of ester lines that tend to break under sudden, strong forces, such as quick strokes for hooking or abrupt dives during a fish fight, aiming to prevent line breaks.

It’s especially recommended for fishing techniques like Ajing and Area Trout, where the benefits of ester lines are maximized.
*It is also Compatible with lines other than ester.

The washers can be used without issue, even if there’s some play in the outer and inner diameters.
They are designed to fit spools with a single drag washer (class 1000-2000).

Please lubricate the drag washer with 2-4 drops of KOMAYA Drag’s exclusive oil before use.

| Variations

KOMAYA DRAG LIMITED EDITION

S Plus & LT Plus
Event-exclusive Ultimate Version

Different hole size and number! 20% performance increase over the current Plus series!

*Maximum instantaneous value when pulled with full force at 500g drag setting

Regular Plus → 560g
Ultimate Version → 530-540g

What is KOMAYA Drag?
- Increased casting distance and catch rate with thinner lines than before
- Reduced line breaks and lure loss
- Confidently tighten the drag
- Increased rod power
- No breaks even with sudden hook sets

- Event-exclusive Ultimate Version (for SHIMANO and DAIWA LT) *Limited stock available due to exclusivity.

- Plus Type S (For SHIMANO) “LIMITED EDITION”
Outer diameter: 20 mm, Inner diameter: 12 mm
Compatible with SHIMANO reels class 1000-2000
*Plus is suited for thinner lines and instantaneous hook setting.

- Plus Type L (For DAIWA LT series) “LIMITED EDITION”
Outer diameter: 22 mm, Inner diameter: 14 mm
Compatible with DAIWA LT concept reels class 1000-2000
*Plus is suited for thinner lines and instantaneous hook setting.

- Type S (For SHIMANO)
Outer diameter: 20.7 mm, Inner diameter: 12 mm
Compatible with SHIMANO reels class 1000-2000

- Plus Type S (For SHIMANO)
Outer diameter: 20 mm, Inner diameter: 12 mm
Compatible with SHIMANO reels class 1000-2000
*Plus is suited for thinner lines and instantaneous hook setting.

- Type D (For DAIWA)
Outer diameter: 24.5 mm, Inner diameter: 11 mm
Compatible with DAIWA reels class 1000-2000

- Type L (For DAIWA LT series)
Outer diameter: 22.8 mm, Inner diameter: 14 mm
Compatible with DAIWA LT concept reels class 1000-2000

- Plus Type L (For DAIWA LT series)
Outer diameter: 22 mm, Inner diameter: 14 mm
Compatible with DAIWA LT concept reels class 1000-2000
*Plus is suited for thinner lines and instantaneous hook setting.

KOMAYA Drag Exclusive Oil

This is the exclusive oil for use with KOMAYA Drag.
Apply 2-4 drops per use.

- Drag Performance-focused Silky Type (Low Viscosity)

- Feeling-oriented Moist Type (Medium Viscosity)

| Enhance Drag Performance With Drag Washers, Drag Units, And Drag Knobs!

[Avail] EVA Handle Knob Type-A *HKEVA

HEDGEHOG STUDIO — 2026-08-19T10:38:08+09:00

　Regarding the stock of AVAIL product

It takes us two to three days to get ready to send Avail products
because we order them from the Avail factory.
Sometimes they might be out of stock at the timing of your order.
In the case of a stockout, we refund your purchase price immediately.

　Description of the product

※It is the price of one handle knob

These EVA knobs are available for genuine handles of SHIMANO, DAIWA as well as Avail.
※This item is usable not only for bait-casting reel but also for spinning reel.
※Not compatible with the handles of Abu Garcia because the diameter of handle shaft is different.

This item will be well-fitted with a genuine product (handle shaft) if the type of reel is to have 2 bearings on each handle knob shaft.
Please make sure that some old types (over 10 year-old reels) are not attachable.

We sell knob caps for this item separately.
Please select your choice!

▼for Handle Knob Bearing

SHG-740ZZ
http://www.hedgehog-studio.co.jp/product/439

▼for Handle Knob Cap

GM Handle Knob Cap
http://www.hedgehog-studio.co.jp/product/1013

EVA A-type BLACK

　Spec

｜EVA A-type

Maximum diameter : 27mm
Length : 41mm
Weight : 7.3g (approx.)

　Compatibility

　Gallery

[SHIMANO Genuine] YUMEYA Aluminium Sensitive Handle Knob (BLACK) *HKAL

HEDGEHOG STUDIO — 2026-08-19T02:44:20+09:00

Description

(SHIMANO Genuine Product)

Experience the hard vibration unique to metal.
A high-sensitivity handle knob that conveys underwater information to your fingertips.

Quantity : 1
Weight : approx 9.0g

Compatibility

SHIMANO Handle Knob A Type

SHIMANO Baitcasting Reel (most model)
SHIMANO Spinning Reel (Spool No.1000-5000)
Avail

[GOLD Works] TAKUMI Bearings “for Drag” with Special Wrench (KOKUCHI Style, TAGEI Style)

HEDGEHOG STUDIO — 2026-08-18T20:53:37+09:00

| Product Description

GOLD Works presents an original project.
The first installment is the meticulously crafted “TAKUMI Bearings.”
Just bearings? No, in reels, bearings are everything.
A lineup of six types tailored to various uses is available.
Step into the world of self-satisfaction and experience the difference.

“TAKUMI Bearings”

Bearings are selected from a large number of domestic bearing units based on strict criteria.
After passing through meticulous processes, only 30% make it to the final product.

Please experience the difference in feeling.

The lineup focuses on the “durability” and “precision” required for internal drive system bearings.
A large number of base bearings are hand-selected and coated one by one.
Only those that meet the standards are shielded again at the factory.

| Size Lineup

“KOKUCHI Style” *High-Speed Model

A high-speed model tuned for higher initial speed with minimal input.
It prevents line breaks from sudden bites typical in smallmouth lake fishing.
Safe to use with lines under 2lb.

“TAGEI Style” *Low-Speed Model

Carefully treated with a blend of high and medium-viscosity oils.
Suitable for all fish species and fishing styles, regardless of whether fluorocarbon, nylon, or PE lines are used.
Compatible with seabass games, rockfish, and extremely fine PE lines used in tai-rubber and tai-tenya games.

- 1170 (7mm-11mm-3mm) x 1170 (7mm-11mm-3mm)
- 1170 (7mm-11mm-3mm) x 1060 (6mm-10mm-3mm)
- 1170 (7mm-11mm-2.5mm) x 1170 (7mm-11mm-2.5mm)
- 1170 (7mm-11mm-2.5mm) x 1060 (6mm-10mm-2.5mm)

*Thickness options: 3mm and 2.5mm.
*All bearings are open-type.

| Installation and Maintenance of TAKUMI Bearings

TAKUMI Bearings are oil-treated at the time of shipment and can be used as is.
To maximize performance, please check the following instructions.

| Installation

1. Open the package, wipe off excess oil with a tissue or paper, and install it as is.

2. Rotate the handle and check for any abnormal noises.

3. Remove the spool again, wipe off any scattered oil, and reassemble.

| Maintenance

1. Use the recommended grease oil indicated on the package or oil of a similar viscosity.

2. For regular maintenance, add more oil. If dirt or debris causes rotation issues, use a parts cleaner to degrease, dry thoroughly, and reapply oil.

(Rest assured that cleaning with an ultrasonic cleaner will not remove the coating.)

3. Avoid applying grease, as it may significantly reduce performance.

*Resistance is minimized for long-distance models compared to other models, which may result in noticeable noise. In such cases, lightly apply low-viscosity oil to the bearing contact area using a fine brush. Be careful not to apply too much, which may impair the original rotation performance.

| TAKUMI Bearings “for Drag”

Model No. Product Name Size JAN Code

TBSC-002 “KOKUCHI Style” 1170 x 1170 (3mm) 1170 x 1170 4580796240324

TBSC-004 “KOKUCHI Style” 1170 x 1060 (3mm) 1170 x 1060 4580796240348

TBSC-001 “KOKUCHI Style” 1170 x 1170 (2.5mm) 1170 x 1170 4580796240317

TBSC-003 “KOKUCHI Style” 1170 x 1060 (2.5mm) 1170 x 1060 4580796240331

TBST-002 “TAGEI Style” 1170 x 1170 (3mm) 1170 x 1170 4580796240287

TBST-004 “TAGEI Style” 1170 x 1060 (3mm) 1170 x 1060 4580796240300

TBST-001 “TAGEI Style” 1170 x 1170 (2.5mm) 1170 x 1170 4580796240270

TBST-003 “TAGEI Style” 1170 x 1060 (2.5mm) 1170 x 1060 4580796240294

*GWMTBB

[GOLD Works] TAKUMI Bearings “for Handle Knobs” (Self-Rotating, Non-Rotating, Micro-Rotating)

HEDGEHOG STUDIO — 2026-08-18T20:48:08+09:00

| Product Description

GOLD Works presents an original project.
The first installment is the meticulously crafted “TAKUMI Bearings.”
Just bearings? No, in reels, bearings are everything.
A lineup of six types tailored to various uses is available.
Step into the world of self-satisfaction and experience the difference.

“TAKUMI Bearings”

Bearings are selected from a large number of domestic bearing units based on strict criteria.
After passing through meticulous processes, only 30% make it to the final product.

Please experience the difference in feeling.

The lineup focuses on the “durability” and “precision” required for internal drive system bearings.
A large number of base bearings are hand-selected and coated one by one.
Only those that meet the standards are shielded again at the factory.

| Size Lineup

“Self-Rotating” Ultra High-Speed Model

Since this part directly touches the fingers, it undergoes a break-in process three times longer than other series.
Afterward, it is treated with the original blended oil, achieving smooth knob rotation.
This enhances the “winding sensitivity” of the reel.

- 740 (7mm-4mm-2.5mm) Open
- 850 (8mm-5mm-2mm) Open

“Non-Rotating” *Low-Speed Model

Based on the self-rotating model, this type undergoes a break-in process soaked in medium-high viscosity oil to reduce noise further. Contrary to the self-rotating model, it barely rotates. This model minimizes knob rotation noise and is ideal for big bait and reel games.

- 740 (7mm-4mm-2.5mm) Open
- 850 (8mm-5mm-2mm) Open

“Micro-Rotating” *Saltwater-Compatible Model

Selected anti-rust base bearings are repeatedly broken in and coated, followed by treatment with medium-viscosity anti-rust oil.
This model is suitable for a wide range of saltwater uses, including Red Seabream Fishing (TAI RUBBER), Seabass, Chinning (Black Bream Fishing), and Rockfish.
It provides smooth winding and reduces the load on the winding mechanism, greatly enhancing the amount of information conveyed by the reel.

- 740 (7mm-4mm-2.5mm) Shielded
- 850 (8mm-5mm-2mm) Shielded

| Installation and Maintenance of TAKUMI Bearings

TAKUMI Bearings are oil-treated at the time of shipment and can be used as is.
To maximize performance, please check the following instructions.

| Installation

1. Open the package, wipe off excess oil with a tissue or paper, and install it as is.

2. Rotate the handle and check for any abnormal noises.

3. Remove the spool again, wipe off any scattered oil, and reassemble.

| Maintenance

1. Use the recommended grease oil indicated on the package or oil of a similar viscosity.

2. For regular maintenance, add more oil. If dirt or debris causes rotation issues, use a parts cleaner to degrease, dry thoroughly, and reapply oil.

(Rest assured that cleaning with an ultrasonic cleaner will not remove the coating.)

3. Avoid applying grease, as it may significantly reduce performance.

*Resistance is minimized for long-distance models compared to other models, which may result in noticeable noise. In such cases, lightly apply low-viscosity oil to the bearing contact area using a fine brush. Be careful not to apply too much, which may impair the original rotation performance.

| TAKUMI Bearings “for Handle Knobs”

Model No. Product Name Size JAN Code

TBSJ-001 “Self-Rotating” 740 (2 pieces) 740 4580796240218

TBSJ-002 “Self-Rotating” 740 (4 pieces) 740 4580796240225

TBSJ-003 “Self-Rotating” 850 (2 pieces) 850 4580796240232

TBSJ-004 “Self-Rotating” 850 (4 pieces) 850 4580796240249

TBSJ-005 “Non-Rotating” 740 (4 pieces) 740 4580796240256

TBSJ-006 “Non-Rotating” 850 (4 pieces) 850 4580796240263

TBSSB-001 “Micro-Rotating” 740 (4 pieces) 740 4580796240478

TBSSB-002 “Micro-Rotating” 850 (4 pieces) 850 4580796240485

*GWMTBB

[GOLD Works] TAKUMI Bearings “for Bait Reel Spool” (KATO Style/HA, KATO Style, HONDA Style, Long Cast Style, Long Cast Style Chinning Custom, TAI KAN Style)

HEDGEHOG STUDIO — 2026-08-18T20:01:19+09:00

| Product Description

GOLD Works presents an original project.
The first installment is the meticulously crafted “TAKUMI Bearings.”
Just bearings? No, in reels, bearings are everything.
A lineup of six types tailored to various uses is available.
Step into the world of self-satisfaction and experience the difference.

“TAKUMI Bearings”

Bearings are selected from a large number of domestic bearing units based on strict criteria.
After passing through meticulous processes, only 30% make it to the final product.

Please experience the difference in feeling.

The lineup focuses on the “durability” and “precision” required for internal drive system bearings.
A large number of base bearings are hand-selected and coated one by one.
Only those that meet the standards are shielded again at the factory.

| Size Lineup

“KATO Style/HA” *Micro BB for Bait Finesse

Upgraded from the KATO style for even higher rotation specifications.
Small-diameter bearings are used, tuned for higher initial speed with less force.
Additionally, the bearings are coated with Glitch’s Runbike (low-viscosity oil) to form an oil film, reducing noise.
This highly specialized item requires time for brake settings.

- 730×730
- 630×630

“KATO Style” *Bait Finesse/Plugging

Treated with low-viscosity oil, this style allows for smoother starts with less force, making low-trajectory approaches possible.
When combined with a bait finesse-compatible spool, the effect is even greater.
It is recommended for general bait finesse and those who frequently use light plugging.

- 1030×1030
- 1030×1150
- 1030×830
- 1150×830
- 830×830

“HONDA Style” *Medium-weight Versatile

A meticulous blend of medium and low-viscosity oils is used for treatment, significantly reducing bearing noise and achieving a “pleasant cast” and “sensitive retrieve.”
It is recommended for those who mainly use heavier lures and winding baits.

- 1030×1030
- 1030×1150
- 1030×830
- 1150×830

“Long-Distance Casting” *Long Distance

Bearings are broken in with special equipment and soaked in ultra-low-viscosity oil, creating bearings close to dry for long-distance casting.
This model is ideal for bank fishing or wading, where extra casting distance is desired with heavier lures.
It is slightly noisier than other models.

- 1030×1030
- 1030×1150
- 1030×830
- 1150×830

“Long-Distance Racing” *Lightweight Lure Long-Distance Casting

This is a long-distance casting variant model that features small-diameter ball bearings and a resin retainer.
Compared to existing long-cast models, the reduced weight of the retainer and ball increases initial rotation speed and helps prevent over-spinning.
While performance depends on the spool and its weight, it can be comfortably used with slightly lighter lures (5g and above).
Ideal for short to mid-range casting and pitching.

- 1030×1030
- 1030×1150

“Long-Distance Casting Chinning (Black Bream Fishing) Custom” *Saltwater-Compatible Model

Factory-tuned based on the Long-Distance Casting for Chinning (Black Bream Fishing) experts.
Designed for continuous casting and retrieving in Chinning (Black Bream Fishing) games, it features a half-shield type for oil durability and rust prevention.
Further coated compared to the Long-Distance Casting, with the oil changed to Glitch Oil “Passive” by FIVEFOCUS.
It offers a milder cast feel, allowing for all-day casting without worrying about oil depletion.
Suitable for not only Chinning (Black Bream Fishing) but also Seabass and Rockfish games.

- 1030×1030
- 1030×1150
- 1030×830

“TAI KAN Style” *Saltwater-Compatible Model

Selected anti-rust base bearings are repeatedly broken in and coated, then treated with high-viscosity anti-rust oil, making these bearings suitable for vertical use.
Red Seabream Fishing (TAI RUBBER) expert “Mr. Shuhara extensively uses it” and a representative of Kaiyu “Mr. Hayashi,” both of whom practice hands-on fishing.
It provides smooth rotation and light winding, increasing the information conveyed to the angler.
Suppressing bearing rotation reduces fall speed without relying on mechanical brakes, thereby reducing unnecessary line trouble during falls and at the bottom. Suitable for Red Seabream Fishing (TAI RUBBER) and Bait TENYA, Cutlassfish, and Squid metal fishing (IKA METAL).

- 1030×1030
- 1030×1150
- 1030×1040

| Installation and Maintenance of TAKUMI Bearings

TAKUMI Bearings are oil-treated at the time of shipment and can be used as is.
To maximize performance, please check the following instructions.

| Installation

1. Open the package, wipe off excess oil with a tissue or paper, and install it as is.

2. Rotate the handle and check for any abnormal noises.

3. Remove the spool again, wipe off any scattered oil, and reassemble.

| Maintenance

1. Use the recommended grease oil indicated on the package or oil of a similar viscosity.

2. For regular maintenance, add more oil. If dirt or debris causes rotation issues, use a parts cleaner to degrease, dry thoroughly, and reapply oil.

(Rest assured that cleaning with an ultrasonic cleaner will not remove the coating.)

3. Avoid applying grease, as it may significantly reduce performance.

*Resistance is minimized for long-distance models compared to other models, which may result in noticeable noise. In such cases, lightly apply low-viscosity oil to the bearing contact area using a fine brush. Be careful not to apply too much, which may impair the original rotation performance.

| TAKUMI Bearings “for Bait Reel Spool”

Model No. Product Name Size JAN Code

TBSK-006 “KATO Style/HA” 730 x 730 730 x 730 4580796240126

TBSK-007 “KATO Style/HA” 630 x 630 630 x 630 4580796240133

TBSK-001 “KATO Style” 1030 x 1030 1030 x 1030 4580796240072

TBSK-004 “KATO Style” 1030 x 1150 1030 x 1150 4580796240102

TBSK-002 “KATO Style” 1030 x 830 1030 x 830 4580796240874

TBSK-003 “KATO Style” 1150 x 830 1150 x 830 4580796240096

TBSK-005 “KATO Style” 830 x 830 830 x 830 4580796240119

TBSH-001 “HONDA Style” 1030 x 1030 1030 x 1030 4580796240010

TBSH-004 “HONDA Style” 1030 x 1150 1030 x 1150 4580796240041

TBSH-002 “HONDA Style” 1030 x 830 1030 x 830 4580796240027

TBSH-003 “HONDA Style” 1150 x 830 1150 x 830 4580796240034

TBSE-001 “Long-Distance Casting” 1030 x 1030 1030 x 1030 4580796240157

TBSE-004 “Long-Distance Casting” 1030 x 1150 1030 x 1150 4580796240188

TBSE-002 “Long-Distance Casting” 1030 x 830 1030 x 830 4580796240164

TBSE-003 “Long-Distance Casting” 1150 x 830 1150 x 830 4580796240171

TBSER-001 “Long-Distance Racing” 1030 x 1030 1030 x 1030 4580796241628

TBSER-002 “Long-Distance Racing” 1030 x 1150 1030 x 1150 4580796241635

TBSSE-001 “Long-Distance Chinning Custom” 1030 x 1030 1030 x 1030 4580796240416

TBSSE-002 “Long-Distance Chinning Custom” 1030 x 1150 1030 x 1150 4580796240423

TBSSE-003 “Long-Distance Chinning Custom” 1030 x 830 1030 x 830 4580796240430

TBSST-001 “TAI KAN Style” 1030 x 1030 1030 x 1030 4580796240447

TBSST-002 “TAI KAN Style” 1030 x 1150 1030 x 1150 4580796240454

TBSST-003 “TAI KAN Style” 1030 x 1040 1030 x 1040 4580796240461

| Wide Selection of Top Brands! Special Feature on Baitcasting Reel Spool Bearings
Check compatibility with the latest reel models here.

*GWMTBB

[Avail] 4-Point Brake UC Bakelite for ABU Ambassadeur 4000?6000 Series ULTRACAST

HEDGEHOG STUDIO — 2026-08-18T19:55:20+09:00

| Product Description

These are replacement parts to convert the 2-point centrifugal brake (part #19372), used in the ULTRACAST Design Spool, to a 4-point brake.
By installing brake blocks in four positions, braking power can be increased compared to the genuine 2-point brake, and the adjustment range becomes larger.
Three types of brake blocks of different sizes (two of each) are included. Please use according to your preference.

| Specifications

Material Body: Stainless Steel
Brake Blocks: Bakelite

Weight Body: Approx. 1 g

Compatible Models Ambassadeur 4000–6000 series ULTRACAST reels
Models using part #19372
*Note: Not compatible with part #1366399

Compatible Brake Blocks Included brake blocks/
Genuine bakelite brake block (part #22565)

Included Brake Block Sizes Large: ø3 x ø1.4 x 3.5 mm
(Size equivalent to B-BLOCK Large brake block: ø3.0 mm x 3.5 mm)
Medium: ø3 x ø1.4 x 2.0 mm
(Size equivalent to genuine bakelite block included in factory tune)
Small: ø2 x ø1.4 x 2.0 mm
(Avail original size)
*2 of each

| Installation Method

1. Remove the spool from the reel.

Part #19372

2. Remove the wire C-ring and take off the brake unit.
Be careful not to lose the bearing.

3. Replace the brake unit with this product.
Attach either the included brake blocks or the genuine bakelite brake blocks.

4. Adjust the number and size of the brake blocks as needed.
When assembling, ensure brake blocks do not protrude outside the frame—push them inward.
Also compatible with Avail Magnetic Brake Microcast Brake CR2 (CL2).

| Non-Compatible Reels

Not compatible with reels that have spools shaped as shown above.

Reels with 6-point brake (#1116726) are not compatible due to different spool attachment method.

ULTRACAST models released in recent years with bakelite 2-point brake (#1366399) are not compatible due to different pinion gear shape.

[SHIMANO Genuine] Gear Grease SHIP - DG06 - for Spinning, Baitcasting Reel

HEDGEHOG STUDIO — 2026-08-18T16:09:24+09:00

SHIMANO Genuine

SHIMANO Genuine Service Grease.

Soft and smooth in texture, this grease is ideal for areas where low rotational resistance is required, such as bearings and low-torque gears.

- Net Content: Approx. 30g

| Applications

- Various gears, resin, and metal wear points in spinning and baitcasting reels
- Handle, gear, and worm shaft sections of general-purpose spinning reels
- Handle components of general-purpose spinning reels, SW spinning reels, conventional reels (including spool shafts), freshwater baitcasting reels, and electric reels (including worm shafts)
- Various bearings and A-RB components (excluding Tiagra)

| Usage Areas

- Handle, gear, and worm shaft sections of general-purpose spinning reels
- Handle components of general-purpose spinning reels, SW spinning reels, conventional reels (including spool shafts), freshwater baitcasting reels, and electric reels (including worm shafts)

| Quick Reference Chart for Recommended Grease and Oil by Application Area

[Note] For water-repellent treated parts, applying oil may impair their water repellency.
Please refer to the instruction manual of your reel for details, as there may be exceptions.

General Spinning Reels

Application
Area Product Code
/S Part No. Product
Name Usage Details Spin Conv. Elec. Bait Lever

Line
Roller 033055
10U0H DG18
Special Water-Repellent
(5g) Line roller section of all spinning reels ●

Drag /
Bail 033055
100SF DG01
ACE-0
(30g) Felt drag washers (for general spinning), carbon washers (for conventional reels), friction rings of spinning reels, bail sliding parts, etc. ● ● ● ●

Handle /
Gear / Worm Shaft 033055
100MB DG06
SHIP-0
(30g) Gears and worm shafts of general spinning reels, various handle components, bearings including A-RB (excluding Tiagra) ● ● ● ●

Roller
Clutch 033130
10LQ0 B-100
(4.5g) Roller clutch (spinning), brake pipe and brake ring of centrifugal brakes (non-DC baitcasting reels), spool shafts (general), general bearings, etc. ● ● ● ● ●

*Note 1: DG10 has been replaced by DG06.
*Note 2: DG14 has been replaced by DG18.

Saltwater Spinning Reels (SW)

Application
Area Product Code
/S Part No. Product
Name Usage Details Spin Conv. Elec. Bait Lever

Line
Roller 033055
10U0H DG18
Special Water-Repellent
(5g) Line roller section of all spinning reels ●

Drag 033055
10TDG DG12
DG-1
(30g) Drag washers of SW spinning reels ●

Bail 033055
100SF DG01
ACE-0
(30g) Felt drag washers (for general spinning), carbon washers (for conventional reels), friction rings of spinning reels, bail sliding parts, etc. ● ● ● ●

Handle 033055
100MB DG06
SHIP-0
(30g) Gears and worm shafts of general spinning reels, various handle components, bearings including A-RB (excluding Tiagra) ● ● ● ●

Gear /
Worm Shaft 033055
13QZJ DG13
SR-G
(30g) For gears of surfcasting and SW spinning reels (also usable for FW spinning) ●

Roller
Clutch 033130
10LQ0 B-100
(4.5g) Roller clutch (spinning), brake pipe and brake ring of centrifugal brakes (non-DC baitcasting reels), spool shafts (general), general bearings, etc. ● ● ● ● ●

*Note 1: DG10 has been replaced by DG06.
*Note 2: DG14 has been replaced by DG18.

Conventional Reels

Application
Area Product Code
/S Part No. Product
Name Usage Details Spin Conv. Elec. Bait Lever

Drag 033055
100SF DG01
ACE-0
(30g) Felt drag washers (general spinning), carbon drag washers for conventional reels, bail sliding parts, etc. ● ● ● ●

Handle / Spool Shaft 033055
100MB DG06
SHIP-0
(30g) Gears and worm shafts (general spinning), various handle components, A-RB and other bearings (excluding Tiagra) ● ● ● ●

Gear / Worm Shaft 033055
100SG DG04
ACE-2
(30g) Gear section for conventional and electric reels (excluding Tiagra) ● ● ● ●

Drag (Tiagra) 033055
100SJ DG09
Disk Drag (30g) Exclusive for 2-speed drag disks of Tiagra reels ●

Gear (Tiagra) 033055
100MC DG07
TBM-0
(30g) Drive gear and bearing section of Tiagra reels ●

*Note 1: DG10 has been replaced by DG06.

Freshwater Baitcasting Reels

Application
Area Product Code
/S Part No. Product
Name Usage Details Spin Conv. Elec. Bait Lever

Drag / Worm Shaft 033055
100SF DG01
ACE-0
(30g) Felt drag washers (general spinning), carbon drag washers for conventional reels, bail sliding parts, etc. ● ● ● ●

Handle 033055
100MB DG06
SHIP-0
(30g) Gears and worm shafts (general spinning), various handle components, A-RB and other bearings (excluding Tiagra) ● ● ● ●

Gear 033055
100SG DG04
ACE-2
(30g) Gear section for conventional and electric reels (excluding Tiagra) ● ● ● ●

Spool Shaft / Brake Pipe
(non-DC) 033130
10LQ1 SSRO-01
(4.5g) Worm shafts (general), general bearings, spool shaft of baitcasting reels, anti-corrosion for exterior parts (e.g., shaft rivet area) ● ● ● ● ●

Brake Ring 033130
10LQ0 B-100
(4.5g) Roller clutch (spinning), brake pipe and brake ring of centrifugal brakes (non-DC baitcasting reels), spool shafts (general), general bearings, etc. ● ● ● ● ●

Spool Shaft / Brake Pipe
(non-DC) 033130
10TR6 BFS Oil
(4.5g) Spool support bearings for BFS baitcasting reels ●

*Note 1: DG10 has been replaced by DG06.

Electric Reels

Application
Area Product Code
/S Part No. Product
Name Usage Details Spin Conv. Elec. Bait Lever

Drag 033055
100SF DG01
ACE-0
(30g) Felt drag washers (general spinning), carbon drag washers for conventional reels, bail sliding parts, etc. ● ● ● ●

Handle / Worm Shaft 033055
100MB DG06
SHIP-0
(30g) Gears and worm shafts (general spinning), various handle components, A-RB and other bearings (excluding Tiagra) ● ● ● ●

Gear 033055
100SG DG04
ACE-2
(30g) Gear section for conventional and electric reels (excluding Tiagra) ● ● ● ●

Power Connector 033055
100SK DG15
Connector
(30g) Power connector section of electric reels ●

*Note 1: DG10 has been replaced by DG06.

| A Full Lineup of Oils & Greases from All Major Brands!
  Choose the Right One According to the Application for Spinning or Baitcasting Reels.

[SHIMANO Genuine] 11 Scorpion DC Spare Spool

HEDGEHOG STUDIO — 2026-08-18T14:56:14+09:00

Description

SHIMANO original spool

This is SHIMANO original spool equipped on 11 Scorpion DC/DC7.
You may use as an extra spool with different line strength.

Weight: approx. 17.7g

Line Capacity

PE Braided line(No. -m): 2.25-150, 3-125, 4-80
Nylon(lb-m): 3-130, 3.5-110, 4-100, 5-80

Compatibility

11 Scorpion DC/DC7

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 17 Scorpion BFS XG LEFT Product code: 037589 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:54:26+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.85 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/3807

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 101VV FIXING BOLT 1.10

2 10Q5T RETAINER 3.85

4 10TNJ HANDLE CAP 3.85

5 103E9 FIXING BOLT 1.10

6 10PXZ HANDLE KNOB BUSH 1.65

7 104FH WASHER 2.20

9 104VX BALL BEARING (4 X 7 X 2.5) 13.75

10 13HV4 HANDLE 45.10

11 13JBM HANDLE ASSEMBLY 90.20

12 10KXW STAR DRAG CLICK PLATE 1.65

13 10R3K STAR DRAG CLICK PLATE 1.65

14 10MFC CLICK PIN 1.65

15 10BT2 CLICK SPRING 1.65

17 10A70 STAR DRAG SPRING 2.75

19 10J1N STAR DRAG SPACER 1.65

20 109F5 DRIVE GEAR WASHER 1.65

22 13U14 MECHANICAL BRAKE KNOB 9.35

23 10896 MECHANICAL BRAKE WASHER 1.10

24 1085F MECHANICAL BRAKE WASHER 1.10

25 10R22 O-RING 1.65

26 101V5 BEARING RETAINING CLIP 1.65

27 105BP BALL BEARING (5 X 9 X 3) 13.75

28 10MPV FIXING BOLT 1.10

29 101V3 BEARING SPACER 2.75

30 10KDE BALL BEARING (3 X 7 X 3) 13.75

31 101V6 BEARING DETENT 1.65

32 10LCW THUMB REST FIXING BOLT 1.10

33 10F5D ROLLER CLUTCH BEARING A-RB 17.05

34 10CCN INNER TUBE 6.05

35 10DQL STAR DRAG PLATE 3.85

36 10JB0 DRAG SOUND EMITTING RATCHET 2.75

37 10DQJ STAR DRAG WASHER 6.05

38 10C0T DRAG CLICK PIN 2.75

39 10J8A DRAG CLICK SPRING 1.65

40 10J87 DRAG SPRING HOLDER 1.65

42 10DQK STAR DRAG WASHER 6.05

43 10D73 STOPPER GEAR 6.05

45 10JDY WORM SHAFT GEAR SPRING 1.65

46 10HJG PIN FOR WORM SHAFT GEAR 1.65

47 10J47 WORM SHAFT GEAR 2.75

48 10LCQ FIXING BOLT 1.10

49 109T1 DRIVE GEAR SHAFT FIXING PLATE 2.75

50 10C47 MAIN GEAR SHAFT WASHER 1.10

51 105NK E TYPE STOP RING 2.5 1.10

53 10MPD FIXING BOLT 1.10

54 10FJB LEVEL WINDING RECEIVING PLATE 1.65

55 104TX WORM GEAR SHAFT WASHER 1.10

56 10BHQ WORM SHAFT PIN 2.75

57 108WQ O-RING 1.65

58 10NVQ LEVEL WINDING ASSEMBLY 11.55

59 10LFL FIXING BOLT 1.65

60 10FNV WORM SHAFT GEAR 2.75

61 10AEZ WORM SHAFT PIN 1.10

62 10TPP WORM SHAFT 6.05

63 10R10 LEVEL-WIND PIPE 1.65

65 10487 CLUTCH YOKE SPRING 1.10

67 10LVE FIXING BOLT 1.10

68 10F3X CLUTCH CAM PUSH PLATE 3.85

73 103C0 FIXING BOLT 1.10

74 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

81 10RYX BODY B CAM LEVER PUSH PLATE 1.65

82 10FJZ WASHER 1.10

83 105NC E TYPE STOP RING 2 1.10

84 10QSH LEVEL-WIND GUIDE 1.65

85 13GTN SPOOL ASSEMBLY 101.20

86 10TNZ FIXING BOLT 1.65

87 13RZQ BRAKE FIXING PLATE 6.05

88 10TM9 BRAKE COIL SPRING 1.65

89 10DPG MAGNET HOLDER ASSEMBLY 11.55

91 1085H MECHANICAL BRAKE WASHER 1.10

92 1055J FIXING BOLT 1.65

95 10DGC ADJUSTMENT WASHER SET 1.65

96 108WS O-RING 4 X 6 1.10

97 10A6K FIXING BOLT 6.05

98 10R0U B RECEIVING ADJUSTMENT WASHER 1.65

101 1055H FIXING BOLT 1.65

103 13UWK STAR DRAG 17.05

104 10328 HANDLE KNOB 11.55

105 13J21 STAR DRAG ASSEMBLY 23.65

131 10SYP HANDLE FIXING NUT 2.75

132 10A3U STAR DRAG FIXING NUT 3.85

133 13HM9 BODY A 22.55

134 101KN DRIVE GEAR 22.55

135 10DQH DRIVE GEAR SHAFT 11.55

136 13SBW LEVEL WINDING GUARD 6.05

137 101KP PINION GEAR 11.55

138 10DQC CLUTCH YOKE 1.65

139 10K0P CLUTCH CAM 2.75

140 10MQM CLUTCH CLAW 3.85

141 10TMC CLUTCH CLAW SPRING 1.65

142 10TME CLUTCH PLATE 4.95

143 10TMU BODY A SEAT 3.85

144 13FY7 FRAME 50.60

145 10TMF CLUTCH LEVER RECEIVER (B) 1.65

146 10TMD CLUTCH LEVER 6.05

147 1019C BODY B CAM LEVER 2.75

149 101KL FRAME B RECEIVER 17.05

150 1019A BR KNOB 2.75

151 13RFG BODY B 11.55

152 13AU5 BODY B ASSEMBLY 67.65

153 101CM BRAKE MOUNTING BASE 2.75

ITOS 10G4L SPOOL THREAD STOPPER SEAL (ACCESSORY) 1.65

MGNT 13B5D MAGNET 2.75

PUNT 13JPY INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORY) 2.75

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 17 Scorpion BFS XG RIGHT Product code: 037572 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:53:37+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.85 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/3807

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 101VV FIXING BOLT 1.10

2 10Q5T RETAINER 3.85

3 101M3 HANDLE FIXING NUT 2.75

4 10TNJ HANDLE CAP 3.85

5 103E9 FIXING BOLT 1.10

6 10PXZ HANDLE KNOB BUSH 1.65

7 104FH WASHER 2.20

9 104VX BALL BEARING (4 X 7 X 2.5) 13.75

10 13HV4 HANDLE 45.10

11 13JBM HANDLE ASSEMBLY 90.20

12 10KXW STAR DRAG CLICK PLATE 1.65

13 10R3K STAR DRAG CLICK PLATE 1.65

14 10MFC CLICK PIN 1.65

15 10BT2 CLICK SPRING 1.65

17 10A70 STAR DRAG SPRING 2.75

18 10A3T STAR DRAG FIXING NUT 3.85

19 10J1N STAR DRAG SPACER 1.65

20 109F5 DRIVE GEAR WASHER 1.65

21 13HM7 BODY A 22.55

22 13U14 MECHANICAL BRAKE KNOB 9.35

23 10896 MECHANICAL BRAKE WASHER 1.10

24 1085F MECHANICAL BRAKE WASHER 1.10

25 10R22 O-RING 1.65

26 101V5 BEARING RETAINING CLIP 1.65

27 105BP BALL BEARING (5 X 9 X 3) 13.75

28 10MPV FIXING BOLT 1.10

29 101V3 BEARING SPACER 2.75

30 10KDE BALL BEARING (3 X 7 X 3) 13.75

31 101V6 BEARING DETENT 1.65

32 10LCW THUMB REST FIXING BOLT 1.10

33 10F5D ROLLER CLUTCH BEARING A-RB 17.05

34 10CCN INNER TUBE 6.05

35 10DQL STAR DRAG PLATE 3.85

36 10JB0 DRAG SOUND EMITTING RATCHET 2.75

37 10DQJ STAR DRAG WASHER 6.05

38 10C0T DRAG CLICK PIN 2.75

39 10J8A DRAG CLICK SPRING 1.65

40 10J87 DRAG SPRING HOLDER 1.65

41 101KM DRIVE GEAR 22.55

42 10DQK STAR DRAG WASHER 6.05

43 10D73 STOPPER GEAR 6.05

44 10DQG DRIVE GEAR SHAFT 11.55

45 10JDY WORM SHAFT GEAR SPRING 1.65

46 10HJG WORM SHAFT GEAR PINS 1.65

47 10J47 WORM SHAFT GEAR 2.75

48 10LCQ FIXING BOLT 1.10

49 109T1 DRIVE GEAR SHAFT FIXING PLATE 2.75

50 10C47 MAIN GEAR SHAFT WASHER 1.10

51 105NK E TYPE STOP RING 2.5 1.10

52 13SBV LEVEL WINDING GUARD 6.05

53 10MPD FIXING BOLT 1.10

54 10FJB LEVEL WINDING RECEIVER 1.65

55 104TX WORMSHAFT WASHER 1.10

56 10BHQ WORM SHAFT PIN 2.75

57 108WQ O-RING 1.65

58 10NVQ LEVEL WINDING ASSEMBLY 11.55

59 10LFL FIXING BOLT 1.65

60 10FNV WORM SHAFT GEAR 2.75

61 10AEZ WORM SHAFT PIN 1.10

62 10TPP WORM SHAFT 6.05

63 10R10 LEVEL-WIND PIPE 1.65

64 1026T PINION GEAR 11.55

65 10487 CLUTCH YOKE SPRING 1.10

66 10TMB CLUTCH YOKE 1.65

67 10LVE FIXING BOLT 1.10

68 10F3X CLUTCH CAM PUSH PLATE 3.85

69 10K0N CLUTCH CAM 2.75

70 10MME CLUTCH CLAW 3.85

71 10R1H CLUTCH CLAW SPRING 1.65

72 10QZV CLUTCH PLATE 4.95

73 103C0 FIXING BOLT 1.10

74 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

75 10R09 BODY A SEAT 3.85

77 13FY6 FRAME 50.60

78 10QZW CLUTCH LEVER RECEIVER (B) 1.65

79 10R1J CLUTCH LEVER 6.05

80 1019B BODY B CAM LEVER 2.75

81 10RYX BODY B CAM LEVER PUSH PLATE 1.65

82 10FJZ SEAT 1.10

83 105NC E TYPE STOP RING 2 1.10

84 10QSH LEVEL-WIND GUIDE 1.65

85 13GTN SPOOL ASSEMBLY 101.20

86 10TNZ FIXING BOLT 1.65

87 13RZQ BRAKE FIXING PLATE 6.05

88 10TM9 BRAKE COIL SPRING 1.65

89 10DPG MAGNET HOLDER ASSEMBLY 11.55

91 1085H MECHANICAL BRAKE WASHER 1.10

92 1055J FIXING BOLT 1.65

93 101V4 FRAME B HOLDER 17.05

94 10199 BR KNOB 2.75

95 10DGC ADJUSTMENT WASHER SET 1.65

96 108WS O-RING 4 X 6 1.10

97 10A6K FIXING BOLT 6.05

98 10R0U ADJUSTMENT WASHER FOR FRAME B 1.65

99 13RFF BODY B 11.55

100 13FS0 BODY B SET 67.65

101 1055H FIXING BOLT 1.65

102 101CJ BRAKE MOUNTING BASE 2.75

103 13UWK STAR DRAG 17.05

104 10328 HANDLE KNOB 11.55

105 13J21 STAR DRAG ASSEMBLY 23.65

ITOS 10G4L SPOOL THREAD STOPPER SEAL (ACCESSORY) 1.65

MGNT 13B5D MAGNET 2.75

PUNT 13JPY INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORY) 2.75

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 17 Scorpion BFS LEFT Product code: 037565 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:52:50+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.85 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/3807

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 101VV FIXING BOLT 1.10

2 10Q5T RETAINER 3.85

4 10TNJ HANDLE CAP 3.85

5 103E9 FIXING BOLT 1.10

6 10PXZ HANDLE KNOB BUSH 1.65

7 104FH WASHER 2.20

9 104VX BALL BEARING (4 X 7 X 2.5) 13.75

10 13HV4 HANDLE 45.10

11 13JBM HANDLE ASSEMBLY 90.20

12 10KXW STAR DRAG CLICK PLATE 1.65

13 10R3K STAR DRAG CLICK PLATE 1.65

14 10MFC CLICK PIN 1.65

15 10BT2 CLICK SPRING 1.65

17 10A70 STAR DRAG SPRING 2.75

19 10J1N STAR DRAG SPACER 1.65

20 109F5 DRIVE GEAR WASHER 1.65

22 13U14 MECHANICAL BRAKE KNOB 9.35

23 10896 MECHANICAL BRAKE WASHER 1.10

24 1085F MECHANICAL BRAKE WASHER 1.10

25 10R22 O-RING 1.65

26 101V5 BEARING RETAINING CLIP 1.65

27 105BP BALL BEARING (5 X 9 X 3) 13.75

28 10MPV FIXING BOLT 1.10

29 101V3 BEARING SPACER 2.75

30 10KDE BALL BEARING (3 X 7 X 3) 13.75

31 101V6 BEARING DETENT 1.65

32 10LCW THUMB REST FIXING BOLT 1.10

33 10F5D ROLLER CLUTCH BEARING A-RB 17.05

34 10CCN INNER TUBE 6.05

35 10DQL STAR DRAG PLATE 3.85

36 10JB0 DRAG SOUND EMITTING RATCHET 2.75

37 10DQJ STAR DRAG WASHER 6.05

38 10C0T DRAG CLICK PIN 2.75

39 10J8A DRAG CLICK SPRING 1.65

40 10J87 DRAG SPRING HOLDER 1.65

42 10DQK STAR DRAG WASHER 6.05

43 10D73 STOPPER GEAR 6.05

45 10JDY WORM SHAFT GEAR SPRING 1.65

46 10HJG PIN FOR WORM SHAFT GEAR 1.65

47 10J47 WORM SHAFT GEAR 2.75

48 10LCQ FIXING BOLT 1.10

49 109T1 DRIVE GEAR SHAFT FIXING PLATE 2.75

50 10C47 MAIN GEAR SHAFT WASHER 1.10

51 105NK E TYPE STOP RING 2.5 1.10

53 10MPD FIXING BOLT 1.10

54 10FJB LEVEL WINDING RECEIVING PLATE 1.65

55 104TX WORM GEAR SHAFT WASHER 1.10

56 10BHQ WORM SHAFT PIN 2.75

57 108WQ O-RING 1.65

58 10NVQ LEVEL WINDING ASSEMBLY 11.55

59 10LFL FIXING BOLT 1.65

60 10FNV WORM SHAFT GEAR 2.75

61 10AEZ WORM SHAFT PIN 1.10

62 10TPP WORM SHAFT 6.05

63 10R10 LEVEL-WIND PIPE 1.65

65 10487 CLUTCH YOKE SPRING 1.10

67 10LVE FIXING BOLT 1.10

68 10F3X CLUTCH CAM PUSH PLATE 3.85

73 103C0 FIXING BOLT 1.10

74 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

81 10RYX BODY B CAM LEVER PUSH PLATE 1.65

82 10FJZ WASHER 1.10

83 105NC E TYPE STOP RING 2 1.10

84 10QSH LEVEL-WIND GUIDE 1.65

85 13GTN SPOOL ASSEMBLY 101.20

86 10TNZ FIXING BOLT 1.65

87 13RZQ BRAKE FIXING PLATE 6.05

88 10TM9 BRAKE COIL SPRING 1.65

89 10DPG MAGNET HOLDER ASSEMBLY 11.55

91 1085H MECHANICAL BRAKE WASHER 1.10

92 1055J FIXING BOLT 1.65

95 10DGC ADJUSTMENT WASHER SET 1.65

96 108WS O-RING 4 X 6 1.10

97 10A6K FIXING BOLT 6.05

98 10R0U B RECEIVING ADJUSTMENT WASHER 1.65

101 1055H FIXING BOLT 1.65

103 13UWK STAR DRAG 17.05

104 10328 HANDLE KNOB 11.55

105 13J21 STAR DRAG ASSEMBLY 23.65

131 10SYP HANDLE FIXING NUT 2.75

132 10A3U STAR DRAG FIXING NUT 3.85

135 10DQH DRIVE GEAR SHAFT 11.55

136 13SBW LEVEL WIND GUARD 6.05

138 10DQC CLUTCH YOKE 1.65

139 10K0P CLUTCH CAM 2.75

140 10MQM CLUTCH CLAW 3.85

141 10TMC CLUTCH CLAW SPRING 1.65

142 10TME CLUTCH PLATE 4.95

143 10TMU BODY A SEAT 3.85

144 13FY7 FRAME 50.60

145 10TMF CLUTCH LEVER RECEIVER (B) 1.65

146 10TMD CLUTCH LEVER 6.05

147 1019C BODY B CAM LEVER 2.75

149 101KL FRAME B RECEIVER 17.05

150 1019A BR KNOB 2.75

151 13RFG BODY B 11.55

152 13AU5 BODY B ASSEMBLY 67.65

153 101CM BRAKE MOUNTING BASE 2.75

171 13HMA BODY A 22.55

172 13URW DRIVE GEAR 22.55

173 13SN9 PINION GEAR 11.55

ITOS 10G4L SPOOL THREAD STOPPER SEAL (ACCESSORY) 1.65

MGNT 13B5D MAGNET 2.75

PUNT 13JPY INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORY) 2.75

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 17 Scorpion BFS RIGHT Product code: 037558 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:51:00+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.85 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/3807

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 101VV FIXING BOLT 1.10

2 10Q5T RETAINER 3.85

3 101M3 HANDLE FIXING NUT 2.75

4 10TNJ HANDLE CAP 3.85

5 103E9 FIXING BOLT 1.10

6 10PXZ HANDLE KNOB BUSH 1.65

7 104FH WASHER 2.20

9 104VX BALL BEARING (4 X 7 X 2.5) 13.75

10 13HV4 HANDLE 45.10

11 13JBM HANDLE ASSEMBLY 90.20

12 10KXW STAR DRAG CLICK PLATE 1.65

13 10R3K STAR DRAG CLICK PLATE 1.65

14 10MFC CLICK PIN 1.65

15 10BT2 CLICK SPRING 1.65

17 10A70 STAR DRAG SPRING 2.75

18 10A3T STAR DRAG FIXING NUT 3.85

19 10J1N STAR DRAG SPACER 1.65

20 109F5 DRIVE GEAR WASHER 1.65

22 13U14 MECHANICAL BRAKE KNOB 9.35

23 10896 MECHANICAL BRAKE WASHER 1.10

24 1085F MECHANICAL BRAKE WASHER 1.10

25 10R22 O-RING 1.65

26 101V5 BEARING RETAINING CLIP 1.65

27 105BP BALL BEARING (5 X 9 X 3) 13.75

28 10MPV FIXING BOLT 1.10

29 101V3 BEARING SPACER 2.75

30 10KDE BALL BEARING (3 X 7 X 3) 13.75

31 101V6 BEARING DETENT 1.65

32 10LCW THUMB REST FIXING BOLT 1.10

33 10F5D ROLLER CLUTCH BEARING A-RB 17.05

34 10CCN INNER TUBE 6.05

35 10DQL STAR DRAG PLATE 3.85

36 10JB0 DRAG SOUND EMITTING RATCHET 2.75

37 10DQJ STAR DRAG WASHER 6.05

38 10C0T DRAG CLICK PIN 2.75

39 10J8A DRAG CLICK SPRING 1.65

40 10J87 DRAG SPRING HOLDER 1.65

42 10DQK STAR DRAG WASHER 6.05

43 10D73 STOPPER GEAR 6.05

44 10DQG DRIVE GEAR SHAFT 11.55

45 10JDY WORM SHAFT GEAR SPRING 1.65

46 10HJG WORM SHAFT GEAR PINS 1.65

47 10J47 WORM SHAFT GEAR 2.75

48 10LCQ FIXING BOLT 1.10

49 109T1 DRIVE GEAR SHAFT FIXING PLATE 2.75

50 10C47 MAIN GEAR SHAFT WASHER 1.10

51 105NK E TYPE STOP RING 2.5 1.10

52 13SBV LEVEL WINDING GUARD 6.05

53 10MPD FIXING BOLT 1.10

54 10FJB LEVEL WINDING RECEIVER 1.65

55 104TX WORMSHAFT WASHER 1.10

56 10BHQ WORM SHAFT PIN 2.75

57 108WQ O-RING 1.65

58 10NVQ LEVEL WINDING ASSEMBLY 11.55

59 10LFL FIXING BOLT 1.65

60 10FNV WORM SHAFT GEAR 2.75

61 10AEZ WORM SHAFT PIN 1.10

62 10TPP WORM SHAFT 6.05

63 10R10 LEVEL-WIND PIPE 1.65

65 10487 CLUTCH YOKE SPRING 1.10

66 10TMB CLUTCH YOKE 1.65

67 10LVE FIXING BOLT 1.10

68 10F3X CLUTCH CAM PUSH PLATE 3.85

69 10K0N CLUTCH CAM 2.75

70 10MME CLUTCH CLAW 3.85

71 10R1H CLUTCH CLAW SPRING 1.65

72 10QZV CLUTCH PLATE 4.95

73 103C0 FIXING BOLT 1.10

74 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

75 10R09 BODY A SEAT 3.85

77 13FY6 FRAME 50.60

78 10QZW CLUTCH LEVER RECEIVER (B) 1.65

79 10R1J CLUTCH LEVER 6.05

80 1019B BODY B CAM LEVER 2.75

81 10RYX BODY B CAM LEVER PUSH PLATE 1.65

82 10FJZ SEAT 1.10

83 105NC E TYPE STOP RING 2 1.10

84 10QSH LEVEL-WIND GUIDE 1.65

85 13GTN SPOOL ASSEMBLY 101.20

86 10TNZ FIXING BOLT 1.65

87 13RZQ BRAKE FIXING PLATE 6.05

88 10TM9 BRAKE COIL SPRING 1.65

89 10DPG MAGNET HOLDER ASSEMBLY 11.55

91 1085H MECHANICAL BRAKE WASHER 1.10

92 1055J FIXING BOLT 1.65

93 101V4 FRAME B HOLDER 17.05

94 10199 BR KNOB 2.75

95 10DGC ADJUSTMENT WASHER SET 1.65

96 108WS O-RING 4 X 6 1.10

97 10A6K FIXING BOLT 6.05

98 10R0U ADJUSTMENT WASHER FOR FRAME B 1.65

99 13RFF BODY B 11.55

100 13FS0 BODY B SET 67.65

101 1055H FIXING BOLT 1.65

102 101CJ BRAKE MOUNTING BASE 2.75

103 13UWK STAR DRAG 17.05

104 10328 HANDLE KNOB 11.55

105 13J21 STAR DRAG SET 23.65

111 13HM8 BODY A 22.55

112 13URV DRIVE GEAR 22.55

113 13SN8 PINION GEAR 11.55

ITOS 10G4L SPOOL THREAD STOPPER SEAL (ACCESSORY) 1.65

MGNT 13B5D MAGNET 2.75

PUNT 13JPY INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORY) 2.75

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 17 Scorpion DC 101HG Product code: 036629 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:49:49+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.77 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/3786

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 101VV FIXING BOLT 1.10

2 10SRE RETAINER 3.85

4 10FMM HANDLE CAP 1.65

5 103E9 FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 104FH WASHER 2.20

9 10PXZ HANDLE KNOB BUSH 1.65

10 101VF HANDLE KNOB BUSHING 22.55

12 10KXW STAR DRAG CLICK PLATE 1.65

13 10J26 STAR DRAG CLICK PLATE 1.65

14 10BT0 CLICK PIN 1.65

15 10BT2 CLICK SPRING 1.65

17 10A70 STAR DRAG SPRING 2.75

19 10J1N STAR DRAG SPACER 1.65

20 109F5 DRIVE GEAR WASHER 1.65

21 13U0W MECHANICAL BRAKE KNOB 9.35

22 10896 MECHANICAL BRAKE WASHER 1.10

23 1085F MECHANICAL BRAKE WASHER 1.10

24 10TMT MECHANICAL BRAKE YURUMI STOP SPRING 1.65

25 105C0 BALL BEARING (3 X 10 X 4) 13.75

26 10EYS BEARING SPACER 2.75

27 105BP BALL BEARING (5 X 9 X 3) 13.75

29 10LCY FIXING BOLT 1.10

30 10F5D ROLLER CLUTCH BEARING A-RB 17.05

31 10CCN INNER TUBE 6.05

32 10D3H STAR DRAG PLATE 2.75

33 106XT STAR DRAG WASHER 6.05

35 10CHF STAR DRAG WASHER 6.05

36 109BB STOPPER GEAR 6.05

38 10JDY SPRING FOR WORM SHAFT GEAR 1.65

39 10HJG WORM SHAFT GEAR PINS 1.65

40 10J47 WORM SHAFT GEAR 2.75

41 109T1 FIXING PLATE FOR DRIVE GEAR SHAFT 2.75

42 10LCQ FIXING BOLT 1.10

43 10C47 MAIN GEAR SHAFT WASHER 1.10

44 105NK E TYPE STOPWHEEL 2.5 1.10

46 10FJB LEVEL WINDING RECEIVER 1.65

47 104TX WORM GEAR SHAFT WASHER 1.10

48 10BHQ WORM SHAFT PIN 2.75

49 108WQ O-RING 1.65

50 10NVQ LEVEL WINDING ASSEMBLY 11.55

51 10LFL FIXING BOLT 1.65

53 10FNV WORM SHAFT GEAR 2.75

54 10AEZ WORM SHAFT PIN 1.10

55 13S5V WORM SHAFT 6.05

56 10NFQ LEVEL-WIND PIPE 1.65

58 10487 CLUTCH YOKE SPRING 1.10

60 10F3X CLUTCH CAM PUSH PLATE 3.85

61 10LVE FIXING BOLT 1.10

66 103C0 FIXING BOLT 1.10

67 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

72 10QSE LEVEL-WIND GUIDE 1.65

73 10FJZ WASHER 1.10

74 105NC E TYPE STOP RING 2 1.10

76 108PY FRAME TATARI WASHER 1.65

77 13GTK SPOOL ASSEMBLY 84.15

78 10E8P FIXING BOLT 1.65

79 101M9 BOARD MOUNTING PLATE 2.75

81 1054D BEARING PULL-OUT STOP 1.10

82 10B94 BEARING SEAL 1.65

83 10EX5 SPOOL SHAFT CONTACT B 1.10

84 101M4 FRAME B RECEIVER 9.35

85 13RY8 BEARING WASHER 1.65

87 108EY B BEARING ADJUSTMENT WASHER 1.65

89 103LE FIXING BOLT 1.10

90 13PEZ SEAT HOLDER 1.65

96 10LCT FIXING BOLT 1.65

131 10SYP HANDLE FIXING NUT 2.75

132 13AYN HANDLE KNOB 11.55

133 13JBL HANDLE ASSEMBLY 67.65

134 10ATZ STAR DRAG 17.05

135 10A3U STAR DRAG FIXING NUT 3.85

136 13TRA BODY A 22.55

137 10CME DRIVE GEAR 22.55

138 10SYR DRIVE GEAR SHAFT 11.55

139 13SBT LEVEL WINDING GUARD 6.05

140 10CRY PINION GEAR 11.55

141 1046W CLUTCH YOKE 1.65

142 10K0P CLUTCH CAM 2.75

143 10MQM CLUTCH CLAW 3.85

144 104CQ CLUTCH CLAW SPRING 1.65

145 10QGJ CLUTCH PLATE 4.95

146 10BVM BODY A SEAT 3.85

147 13FY5 FRAME 50.60

148 1096T CLUTCH LEVER RECEIVER (B) 1.65

149 10CDM CLUTCH LEVER 6.05

150 10B54 BODY B BOARD ASSEMBLY 112.20

151 10SYQ BODY B CAM LEVER 2.75

152 10QUT MAGNET CAM ASSEMBLY 9.35

153 10EV6 BR KNOB 22.55

154 10LD1 CLICK SHILLING 1.65

155 13RFB MAIN UNIT B 11.55

156 13RZS BODY B SUBSTRATE SEAL 1.65

157 13FRZ BODY B ASSEMBLY (WITH BEARINGS) 168.30

ITOS 10G4L SPOOL THREAD STOPPER SEAL (ACCESSORY) 1.65

PUNT 13JQ3 INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORY) 2.75

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 17 Scorpion DC 100HG Product code: 036612 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:49:04+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.77 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/3786

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 101VV FIXING BOLT 1.10

2 10SRE RETAINER 3.85

3 101M3 HANDLE FIXING NUT 2.75

4 10FMM HANDLE CAP 1.65

5 103E9 FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 104FH WASHER 2.20

8 13AYM HANDLE KNOB 11.55

9 10PXZ HANDLE KNOB BUSH 1.65

10 101VF HANDLE 22.55

11 13JBK HANDLE ASSEMBLY 67.65

12 10KXW STAR DRAG CLICK PLATE 1.65

13 10J26 STAR DRAG CLICK PLATE 1.65

14 10BT0 CLICK PIN 1.65

15 10BT2 CLICK SPRING 1.65

16 10D6T STAR DRAG 17.05

17 10A70 STAR DRAG SPRING 2.75

18 10A3T STAR DRAG FIXING NUT 3.85

19 10J1N STAR DRAG SPACER 1.65

20 109F5 DRIVE GEAR WASHER 1.65

21 13U0W MECHANICAL BRAKE KNOB 9.35

22 10896 MECHANICAL BRAKE WASHER 1.10

23 1085F MECHANICAL BRAKE WASHER 1.10

24 10TMT MECHANICAL BRAKE YURUMI STOP SPRING 1.65

25 105C0 BALL BEARING (3 X 10 X 4) 13.75

26 10EYS BEARING SPACER 2.75

27 105BP BALL BEARING (5 X 9 X 3) 13.75

28 13TR8 MAIN UNIT A 22.55

29 10LCY FIXING BOLT 1.10

30 10F5D ROLLER CLUTCH BEARING A-RB 17.05

31 10CCN INNER TUBE 6.05

32 10D3H STAR DRAG PLATE 2.75

33 106XT STAR DRAG WASHER 6.05

34 10CMC DRIVE GEAR 22.55

35 10CHF STAR DRAG WASHER 6.05

36 109BB STOPPER GEAR 6.05

37 10286 DRIVE GEAR SHAFT 11.55

38 10JDY SPRING FOR WORM SHAFT GEAR 1.65

39 10HJG WORM SHAFT GEAR PINS 1.65

40 10J47 WORM SHAFT GEAR 2.75

41 109T1 FIXING PLATE FOR DRIVE GEAR SHAFT 2.75

42 10LCQ FIXING BOLT 1.10

43 10C47 MAIN GEAR SHAFT WASHER 1.10

44 105NK E TYPE STOP RING 2.5 1.10

45 13SBN LEVEL WINDING GUARD 6.05

46 10FJB LEVEL WINDING RECEIVER 1.65

47 104TX WORMSHAFT WASHER 1.10

48 10BHQ WORM SHAFT PIN 2.75

49 108WQ O-RING 1.65

50 10NVQ LEVEL WINDING ASSEMBLY 11.55

51 10LFL FIXING BOLT 1.65

53 10FNV WORM SHAFT GEAR 2.75

54 10AEZ WORM SHAFT PIN 1.10

55 13S5V WORM SHAFT 6.05

56 10NFQ LEVEL-WIND PIPE 1.65

57 10CRW PINION GEAR 11.55

58 10487 CLUTCH YOKE SPRING 1.10

59 1046V CLUTCH YOKE 1.65

60 10F3X CLUTCH CAM PUSH PLATE 3.85

61 10LVE FIXING BOLT 1.10

62 10K0N CLUTCH CAM 2.75

63 10MME CLUTCH CLAW 3.85

64 104CP CLUTCH CLAW SPRING 1.65

65 10QGH CLUTCH PLATE 4.95

66 103C0 FIXING BOLT 1.10

67 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

68 10BVL BODY A SEAT 3.85

69 13FY4 FRAME 50.60

70 1096S CLUTCH LEVER RECEIVER (B) 1.65

71 10CDL CLUTCH LEVER 6.05

72 10QSE LEVEL-WIND GUIDE 1.65

73 10FJZ WASHER 1.10

74 105NC E TYPE RETAINING RING 2 1.10

76 108PY FRAME CONTACT WASHER 1.65

77 13GTK SPOOL ASSEMBLY 84.15

78 10E8P FIXING BOLT 1.65

79 101M9 SUBSTRATE MOUNTING PLATE 2.75

80 10B53 BODY B SUBSTRATE ASSEMBLY 112.20

81 1054D BEARING PULL-OUT STOPPER 1.10

82 10B94 BEARING SEAL 1.65

83 10EX5 SPOOL SHAFT ATTACHMENT B 1.10

84 101M4 FRAME B RECEIVER 9.35

85 13RY8 BEARING WASHER 1.65

86 10SRF BODY B CAM LEVER 2.75

87 108EY B BEARING ADJUSTMENT WASHER 1.65

88 101KX MAGNET CAM ASSEMBLY 9.35

89 103LE FIXING BOLT 1.10

90 13PEZ BR WASHER 1.65

91 10EV5 BR KNOB 22.55

92 10LD0 SOUND EMISSION SHILLING 1.65

93 13RFA BODY B 11.55

94 13RZR BODY B SUBSTRATE SEAL 1.65

95 13FRY BODY B ASSEMBLY (WITH BEARINGS) 168.30

96 10LCT FIXING BOLT 1.65

ITOS 10G4L SPOOL THREAD STOPPER SEAL (ACCESSORY) 1.65

PUNT 13JQ3 INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORY) 2.75

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 17 Scorpion DC 101 Product code: 036605 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:48:14+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.77 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/3786

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 101VV FIXING BOLT 1.10

2 10SRE RETAINER 3.85

4 10FMM HANDLE CAP 1.65

5 103E9 FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 104FH WASHER 2.20

9 10PXZ HANDLE KNOB BUSH 1.65

10 101VF HANDLE KNOB BUSHING 22.55

12 10KXW STAR DRAG CLICK PLATE 1.65

13 10J26 STAR DRAG CLICK PLATE 1.65

14 10BT0 CLICK PIN 1.65

15 10BT2 CLICK SPRING 1.65

17 10A70 STAR DRAG SPRING 2.75

19 10J1N STAR DRAG SPACER 1.65

20 109F5 DRIVE GEAR WASHER 1.65

21 13U0W MECHANICAL BRAKE KNOB 9.35

22 10896 MECHANICAL BRAKE WASHER 1.10

23 1085F MECHANICAL BRAKE WASHER 1.10

24 10TMT MECHANICAL BRAKE YURUMI STOP SPRING 1.65

25 105C0 BALL BEARING (3 X 10 X 4) 13.75

26 10EYS BEARING SPACER 2.75

27 105BP BALL BEARING (5 X 9 X 3) 13.75

29 10LCY FIXING BOLT 1.10

30 10F5D ROLLER CLUTCH BEARING A-RB 17.05

31 10CCN INNER TUBE 6.05

32 10D3H STAR DRAG PLATE 2.75

33 106XT STAR DRAG WASHER 6.05

35 10CHF STAR DRAG WASHER 6.05

36 109BB STOPPER GEAR 6.05

38 10JDY SPRING FOR WORM SHAFT GEAR 1.65

39 10HJG WORM SHAFT GEAR PINS 1.65

40 10J47 WORM SHAFT GEAR 2.75

41 109T1 FIXING PLATE FOR DRIVE GEAR SHAFT 2.75

42 10LCQ FIXING BOLT 1.10

43 10C47 MAIN GEAR SHAFT WASHER 1.10

44 105NK E TYPE STOPWHEEL 2.5 1.10

46 10FJB LEVEL WINDING RECEIVER 1.65

47 104TX WORM GEAR SHAFT WASHER 1.10

48 10BHQ WORM SHAFT PIN 2.75

49 108WQ O-RING 1.65

50 10NVQ LEVEL WINDING ASSEMBLY 11.55

51 10LFL FIXING BOLT 1.65

53 10FNV WORM SHAFT GEAR 2.75

54 10AEZ WORM SHAFT PIN 1.10

55 13S5V WORM SHAFT 6.05

56 10NFQ LEVEL-WIND PIPE 1.65

58 10487 CLUTCH YOKE SPRING 1.10

60 10F3X CLUTCH CAM PUSH PLATE 3.85

61 10LVE FIXING BOLT 1.10

66 103C0 FIXING BOLT 1.10

67 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

72 10QSE LEVEL-WIND GUIDE 1.65

73 10FJZ WASHER 1.10

74 105NC E TYPE STOP RING 2 1.10

76 108PY FRAME TATARI WASHER 1.65

77 13GTK SPOOL ASSEMBLY 84.15

78 10E8P FIXING BOLT 1.65

79 101M9 BOARD MOUNTING PLATE 2.75

81 1054D BEARING PULL-OUT STOP 1.10

82 10B94 BEARING SEAL 1.65

83 10EX5 SPOOL SHAFT CONTACT B 1.10

84 101M4 FRAME B RECEIVER 9.35

85 13RY8 BEARING WASHER 1.65

87 108EY B BEARING ADJUSTMENT WASHER 1.65

89 103LE FIXING BOLT 1.10

90 13PEZ SEAT HOLDER 1.65

96 10LCT FIXING BOLT 1.65

131 10SYP HANDLE FIXING NUT 2.75

132 13AYN HANDLE KNOB 11.55

133 13JBL HANDLE ASSEMBLY 67.65

134 10ATZ STAR DRAG 17.05

135 10A3U STAR DRAG FIXING NUT 3.85

138 10SYR DRIVE GEAR SHAFT 11.55

139 13SBT LEVEL WINDING GUARD 6.05

141 1046W CLUTCH YOKE 1.65

142 10K0P CLUTCH CAM 2.75

143 10MQM CLUTCH CLAW 3.85

144 104CQ CLUTCH CLAW SPRING 1.65

145 10QGJ CLUTCH PLATE 4.95

146 10BVM BODY A SEAT 3.85

147 13FY5 FRAME 50.60

148 1096T CLUTCH LEVER RECEIVER (B) 1.65

149 10CDM CLUTCH LEVER 6.05

150 10B54 BODY B BOARD ASSEMBLY 112.20

151 10SYQ BODY B CAM LEVER 2.75

152 10QUT MAGNET CAM ASSEMBLY 9.35

153 10EV6 BR KNOB 22.55

154 10LD1 CLICK SHILLING 1.65

155 13RFB MAIN UNIT B 11.55

156 13RZS BODY B SUBSTRATE SEAL 1.65

157 13FRZ BODY B ASSEMBLY (WITH BEARINGS) 168.30

171 13TRB BODY A 22.55

172 10CMF DRIVE GEAR 22.55

173 10CRZ PINION GEAR 11.55

ITOS 10G4L SPOOL THREAD STOPPER SEAL (ACCESSORY) 1.65

PUNT 13JQ3 INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORY) 2.75

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 17 Scorpion DC 100 Product code: 036599 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:47:19+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.77 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/3786

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 101VV FIXING BOLT 1.10

2 10SRE RETAINER 3.85

3 101M3 HANDLE FIXING NUT 2.75

4 10FMM HANDLE CAP 1.65

5 103E9 FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 104FH WASHER 2.20

8 13AYM HANDLE KNOB 11.55

9 10PXZ HANDLE KNOB BUSH 1.65

10 101VF HANDLE 22.55

11 13JBK HANDLE ASSEMBLY 67.65

12 10KXW STAR DRAG CLICK PLATE 1.65

13 10J26 STAR DRAG CLICK PLATE 1.65

14 10BT0 CLICK PIN 1.65

15 10BT2 CLICK SPRING 1.65

16 10D6T STAR DRAG 17.05

17 10A70 STAR DRAG SPRING 2.75

18 10A3T STAR DRAG FIXING NUT 3.85

19 10J1N STAR DRAG SPACER 1.65

20 109F5 DRIVE GEAR WASHER 1.65

21 13U0W MECHANICAL BRAKE KNOB 9.35

22 10896 MECHANICAL BRAKE WASHER 1.10

23 1085F MECHANICAL BRAKE WASHER 1.10

24 10TMT MECHANICAL BRAKE YURUMI STOP SPRING 1.65

25 105C0 BALL BEARING (3 X 10 X 4) 13.75

26 10EYS BEARING SPACER 2.75

27 105BP BALL BEARING (5 X 9 X 3) 13.75

29 10LCY FIXING BOLT 1.10

30 10F5D ROLLER CLUTCH BEARING A-RB 17.05

31 10CCN INNER TUBE 6.05

32 10D3H STAR DRAG PLATE 2.75

33 106XT STAR DRAG WASHER 6.05

35 10CHF STAR DRAG WASHER 6.05

36 109BB STOPPER GEAR 6.05

37 10286 DRIVE GEAR SHAFT 11.55

38 10JDY SPRING FOR WORM SHAFT GEAR 1.65

39 10HJG WORM SHAFT GEAR PINS 1.65

40 10J47 WORM SHAFT GEAR 2.75

41 109T1 FIXING PLATE FOR DRIVE GEAR SHAFT 2.75

42 10LCQ FIXING BOLT 1.10

43 10C47 MAIN GEAR SHAFT WASHER 1.10

44 105NK E TYPE STOP RING 2.5 1.10

45 13SBN LEVEL WINDING GUARD 6.05

46 10FJB LEVEL WINDING RECEIVER 1.65

47 104TX WORMSHAFT WASHER 1.10

48 10BHQ WORM SHAFT PIN 2.75

49 108WQ O-RING 1.65

50 10NVQ LEVEL WINDING ASSEMBLY 11.55

51 10LFL FIXING BOLT 1.65

53 10FNV WORM SHAFT GEAR 2.75

54 10AEZ WORM SHAFT PIN 1.10

55 13S5V WORM SHAFT 6.05

56 10NFQ LEVEL-WIND PIPE 1.65

58 10487 CLUTCH YOKE SPRING 1.10

59 1046V CLUTCH YOKE 1.65

60 10F3X CLUTCH CAM PUSH PLATE 3.85

61 10LVE FIXING BOLT 1.10

62 10K0N CLUTCH CAM 2.75

63 10MME CLUTCH CLAW 3.85

64 104CP CLUTCH CLAW SPRING 1.65

65 10QGH CLUTCH PLATE 4.95

66 103C0 FIXING BOLT 1.10

67 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

68 10BVL BODY A SEAT 3.85

69 13FY4 FRAME 50.60

70 1096S CLUTCH LEVER RECEIVER (B) 1.65

71 10CDL CLUTCH LEVER 6.05

72 10QSE LEVEL-WIND GUIDE 1.65

73 10FJZ WASHER 1.10

74 105NC E TYPE RETAINING RING 2 1.10

76 108PY FRAME CONTACT WASHER 1.65

77 13GTK SPOOL ASSEMBLY 84.15

78 10E8P FIXING BOLT 1.65

79 101M9 SUBSTRATE MOUNTING PLATE 2.75

80 10B53 BODY B SUBSTRATE ASSEMBLY 112.20

81 1054D BEARING PULL-OUT STOPPER 1.10

82 10B94 BEARING SEAL 1.65

83 10EX5 SPOOL SHAFT ATTACHMENT B 1.10

84 101M4 FRAME B RECEIVER 9.35

85 13RY8 BEARING WASHER 1.65

86 10SRF BODY B CAM LEVER 2.75

87 108EY B BEARING ADJUSTMENT WASHER 1.65

88 101KX MAGNET CAM ASSEMBLY 9.35

89 103LE FIXING BOLT 1.10

90 13PEZ BR WASHER 1.65

91 10EV5 BR KNOB 22.55

92 10LD0 SOUND EMISSION SHILLING 1.65

93 13RFA BODY B 11.55

94 13RZR BODY B SUBSTRATE SEAL 1.65

95 13FRY BODY B ASSEMBLY (WITH BEARINGS) 168.30

96 10LCT FIXING BOLT 1.65

112 13TR9 BODY A 22.55

113 10CMB DRIVE GEAR 22.55

114 10CPX PINION GEAR 11.55

ITOS 10G4L SPOOL THREAD STOPPER SEAL (ACCESSORY) 1.65

PUNT 13JQ3 INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORY) 2.75

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 19 Scorpion MGL 151 XG Product code: 040367 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:46:04+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.84 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/4540

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "30 / ROLLER CLUTCH" , they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10R1Q FIXING BOLT 1.65

2 10SSK RETAINER 3.85

4 100NC HANDLE CAP 1.65

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 1003Z WASHER 2.75

8 10PXZ HANDLE KNOB BUSHING 1.65

10 10KXW STAR DRAG CLICK PLATE 1.65

11 10J26 STAR DRAG CLICK PLATE 1.65

12 10MFC CLICK PIN 1.65

13 10BT2 CLICK SPRING 1.65

15 10A70 STAR DRAG SPRING 2.75

17 10J1N STAR DRAG SPACER 1.65

18 109F5 DRIVE GEAR WASHER 1.65

19 105PW STAR DRAG BEARING WASHER 1.10

20 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

21 13U1N MECHANICAL BRAKE KNOB 9.35

22 10896 MECHANICAL BRAKE WASHER 1.10

23 1085F MECHANICAL BRAKE WASHER 1.10

24 1054D BEARING PULL-OUT STOPPER 1.10

25 105C0 BALL BEARING (3 X 10 X 4) 13.75

26 10EYS BEARING SPACER 2.75

27 105BP BALL BEARING (5 X 9 X 3) 13.75

28 108WK O-RING SM14 1.65

30 10F33 ROLLER CLUTCH *Cannot be ordered 22.55

31 10SRM ROLLER CLUTCH INNER TUBE 6.05

32 10SSR STAR DRAG PLATE 2.75

33 10SSF STAR DRAG WASHER 11.55

35 1023U STAR DRAG WASHER 6.05

36 10SSJ STOPPER GEAR 6.05

38 10HJG PIN FOR WORM SHAFT GEAR 1.65

39 10JDY SPRING FOR WORM SHAFT GEAR 1.65

40 101K8 WORM SHAFT GEAR 3.85

41 10S3Y FIXING BOLT 1.10

42 109T1 DRIVE GEAR SHAFT FIXING PLATE 2.75

43 10DQF DRIVE GEAR SHAFT BUSHING 1.65

44 1003V WASHER 2.75

45 105NK E TYPE STOP RING 2.5 1.10

47 10LCQ FIXING BOLT 1.10

48 10FJB LEVEL WINDING RECEIVER 1.65

49 1003S WORM SHAFT PIN 2.75

50 10BHQ WORM SHAFT PIN 2.75

51 108WQ O-RING 1.65

52 101E0 LEVEL WINDING ASSEMBLY 11.55

53 10SRL WORM SHAFT GEAR 3.85

54 10SSS WORM SHAFT 2.75

55 10SSP LEVEL WINDING PIPE 1.65

56 101GT O-RING 1.65

58 104BC CLUTCH YOKE SPRING 1.10

60 10LVE FIXING BOLT 1.10

61 10F3X CLUTCH CAM PUSH PLATE 3.85

62 10190 WASHER 1.65

67 10559 FIXING BOLT 1.65

68 10S57 FIXING BOLT 1.65

71 105NB E TYPE RETAINING RING 1.5 1.10

72 10SXB FIXING BOLT 1.65

76 10MPD FIXING BOLT 1.10

77 10QSE LEVEL WINDING GUIDE 1.65

78 10S42 WASHER 2.75

79 105NC E TYPE RETAINING RING 2 1.10

80 108PY FRAME TALLY WASHER 1.65

81 10LHY FIXING BOLT 1.65

82 10SXA FIXING BOLT 1.65

84 13GG7 SPOOL ASSEMBLY 67.65

85 10EX5 SPOOL SHAFT CONTACT B 1.10

86 101DR BRAKE PIPE GEAR 9.35

87 100GW O-RING 1.65

88 10L1Q FIXING BOLT 1.10

90 10042 WASHER 2.75

92 10040 WASHER 2.75

93 10GQZ CLICK SPRING 1.10

94 103LE FIXING BOLT 1.10

95 108WS O-RING 4 X 6 1.10

97 103L7 FIXING BOLT 1.10

98 10CLF INTERMEDIATE GEAR 1.65

99 10KNH DAMPER SPRING 1.65

102 1016R HANDLE 22.55

104 1023S WASHER 2.75

401 13V30 HANDLE FIXING NUT 2.75

402 13JCT HANDLE ASSEMBLY 67.65

403 13V3M STAR DRAG 11.55

404 10A3U STAR DRAG FIXING NUT 3.85

405 13TWR BODY A 22.55

406 10EBM DRIVE GEAR 22.55

407 10EBF DRIVE GEAR SHAFT 11.55

408 13SH0 LEVEL WINDING GUARD 6.05

409 10EBD PINION GEAR 11.55

410 10DQC CLUTCH YOKE 1.65

411 10EB3 CLUTCH CAM 2.75

412 1003W CLUTCH CLAW ASSEMBLY 3.85

413 104CQ CLUTCH CLAW SPRING 1.65

414 10EBC CLUTCH PLATE 4.95

415 10EBG BODY A SEAT 3.85

416 13G9T FRAME ASSEMBLY 56.10

417 10EBK CLUTCH LEVER RECEIVING CASE (B) 1.65

418 13H68 CLUTCH LEVER 6.05

419 10EB4 CLUTCH LEVER SEAT (A) 1.65

420 10041 FRAME B RECEIVER ASSEMBLY 17.05

421 10EB7 BODY B CAM LEVER 1.65

422 10263 BRAKE DIAL 3.85

423 13FSU BODY B 11.55

425 1003U WASHER 2.75

427 10EBH HANDLE KNOB 11.55

BSM1 1019F BRAKE SHOE 1.10

BST1 13SFU BRAKE SHAFT 1.10

PUNT 13JR2 INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORY) 1.65

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 19 Scorpion MGL 150 XG Product code: 040350 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:45:13+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.84 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/4540

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "30 / ROLLER CLUTCH" , they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10R1Q FIXING BOLT 1.65

2 10SSK RETAINER 3.85

3 13V31 HANDLE FIXING NUT 2.75

4 100NC HANDLE CAP 1.65

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 1003Z WASHER 2.75

8 10PXZ HANDLE KNOB BUSH 1.65

9 13JCP HANDLE ASSEMBLY 67.65

10 10KXW STAR DRAG CLICK PLATE 1.65

11 10J26 STAR DRAG CLICK PLATE 1.65

12 10MFC CLICK PIN 1.65

13 10BT2 CLICK SPRING 1.65

14 13V3L STAR DRAG 11.55

15 10A70 STAR DRAG SPRING 2.75

16 10A3T STAR DRAG FIXING NUT 3.85

17 10J1N STAR DRAG SPACER 1.65

18 109F5 DRIVE GEAR WASHER 1.65

19 105PW STAR DRAG BEARING WASHER 1.10

20 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

21 13U1N MECHANICAL BRAKE KNOB 9.35

22 10896 MECHANICAL BRAKE WASHER 1.10

23 1085F MECHANICAL BRAKE WASHER 1.10

24 1054D BEARING PULL-OUT STOPPER 1.10

25 105C0 BALL BEARING (3 X 10 X 4) 13.75

26 10EYS BEARING SPACER 2.75

27 105BP BALL BEARING (5 X 9 X 3) 13.75

28 108WK O-RING SM14 1.65

29 13TWN BODY A 22.55

30 10F33 ROLLER CLUTCH *Cannot be ordered 22.55

31 10SRM ROLLER CLUTCH INNER TUBE 6.05

32 10SSR STAR DRAG PLATE 2.75

33 10SSF STAR DRAG WASHER 11.55

34 10SRN DRIVE GEAR 22.55

35 1023U STAR DRAG WASHER 6.05

36 10SSJ STOPPER GEAR 6.05

37 10SG7 DRIVE GEAR SHAFT 11.55

38 10HJG PIN FOR WORM SHAFT GEAR 1.65

39 10JDY SPRING FOR WORM SHAFT GEAR 1.65

40 101K8 WORM SHAFT GEAR 3.85

41 10S3Y FIXING BOLT 1.10

42 109T1 DRIVE GEAR SHAFT FIXING PLATE 2.75

43 10DQF DRIVE GEAR SHAFT BUSHING 1.65

44 1003V WASHER 2.75

45 105NK E TYPE STOP RING 2.5 1.10

46 13SGZ LEVEL WINDING GUARD 6.05

47 10LCQ FIXING BOLT 1.10

48 10FJB LEVEL WINDING RECEIVER 1.65

49 1003S WORM SHAFT PIN 2.75

50 10BHQ WORM SHAFT PIN 2.75

51 108WQ O-RING 1.65

52 101E0 LEVEL WINDING ASSEMBLY 11.55

53 10SRL WORM SHAFT GEAR 3.85

54 10SSS WORM SHAFT 2.75

55 10SSP LEVEL WINDING PIPE 1.65

56 101GT O-RING 1.65

57 10SSL PINION GEAR 11.55

58 104BC CLUTCH YOKE SPRING 1.10

59 10TMB CLUTCH YOKE 1.65

60 10LVE FIXING BOLT 1.10

61 10F3X CLUTCH CAM PUSH PLATE 3.85

62 10190 WASHER 1.65

63 10SG1 CLUTCH CAM 2.75

64 10MQN CLUTCH CLAW 3.85

65 104CN CLUTCH CLAW SPRING 1.65

66 10SSV CLUTCH PLATE 4.95

67 10559 FIXING BOLT 1.65

68 10S57 FIXING BOLT 1.65

69 10SST BODY A SEAT 3.85

70 13G9R FRAME ASSEMBLY 56.10

71 105NB E TYPE STOP RING 1.5 1.10

72 10SXB FIXING BOLT 1.65

73 10SG5 CLUTCH LEVER RECEIVER (B) 1.65

74 13H67 CLUTCH LEVER 6.05

75 10SRK CLUTCH LEVER HOLDER (A) 1.65

76 10MPD FIXING BOLT 1.10

77 10QSE LEVEL WINDING GUIDE 1.65

78 10S42 WASHER 2.75

79 105NC E TYPE RETAINING RING 2 1.10

80 108PY FRAME TATARI WASHER 1.65

81 10LHY FIXING BOLT 1.65

82 10SXA FIXING BOLT 1.65

84 13GG7 SPOOL ASSEMBLY 67.65

85 10EX5 SPOOL SHAFT CONTACT B 1.10

86 101DR BRAKE PIPE GEAR 9.35

87 100GW O-RING 1.65

88 10L1Q FIXING BOLT 1.10

89 10DSB FRAME B RECEIVING ASSEMBLY 17.05

90 10042 WASHER 2.75

91 10SG6 BODY B CAM LEVER 1.65

92 10040 CAM LEVER WASHER 2.75

93 10GQZ CLICK SPRING 1.10

94 103LE FIXING BOLT 1.10

95 108WS O-RING 4 X 6 1.10

96 10SAZ BR KNOB 3.85

97 103L7 FIXING BOLT 1.10

98 10CLF INTERMEDIATE GEAR 1.65

99 10KNH DAMPER SPRING 1.65

100 13FSS BODY B 11.55

102 1016R HANDLE 22.55

103 10SSM HANDLE KNOB 11.55

104 1023S WASHER 2.75

BSM1 1019F BRAKE SHOE 1.10

BST1 13SFU BRAKE SHAFT 1.10

PUNT 13JR2 INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORIES) 1.65

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 19 Scorpion MGL 151 HG Product code: 040343 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:44:25+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.84 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/4540

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "30 / ROLLER CLUTCH" , they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10R1Q FIXING BOLT 1.65

2 10SSK RETAINER 3.85

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 1003Z WASHER 2.75

8 10PXZ HANDLE KNOB BUSHING 1.65

10 10KXW STAR DRAG CLICK PLATE 1.65

11 10J26 STAR DRAG CLICK PLATE 1.65

12 10MFC CLICK PIN 1.65

13 10BT2 CLICK SPRING 1.65

15 10A70 STAR DRAG SPRING 2.75

17 10J1N STAR DRAG SPACER 1.65

18 109F5 DRIVE GEAR WASHER 1.65

19 105PW STAR DRAG BEARING WASHER 1.10

20 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

21 13U1N MECHANICAL BRAKE KNOB 9.35

22 10896 MECHANICAL BRAKE WASHER 1.10

23 1085F MECHANICAL BRAKE WASHER 1.10

24 1054D BEARING PULL-OUT STOPPER 1.10

25 105C0 BALL BEARING (3 X 10 X 4) 13.75

26 10EYS BEARING SPACER 2.75

27 105BP BALL BEARING (5 X 9 X 3) 13.75

28 108WK O-RING SM14 1.65

30 10F33 ROLLER CLUTCH *Cannot be ordered 22.55

31 10SRM ROLLER CLUTCH INNER TUBE 6.05

32 10SSR STAR DRAG PLATE 2.75

33 10SSF STAR DRAG WASHER 11.55

35 1023U STAR DRAG WASHER 6.05

36 10SSJ STOPPER GEAR 6.05

38 10HJG PIN FOR WORM SHAFT GEAR 1.65

39 10JDY SPRING FOR WORM SHAFT GEAR 1.65

40 101K8 WORM SHAFT GEAR 3.85

41 10S3Y FIXING BOLT 1.10

42 109T1 DRIVE GEAR SHAFT FIXING PLATE 2.75

43 10DQF DRIVE GEAR SHAFT BUSHING 1.65

44 1003V WASHER 2.75

45 105NK E TYPE STOP RING 2.5 1.10

47 10LCQ FIXING BOLT 1.10

48 10FJB LEVEL WINDING RECEIVER 1.65

49 1003S WORM SHAFT PIN 2.75

50 10BHQ WORM SHAFT PIN 2.75

51 108WQ O-RING 1.65

52 101E0 LEVEL WINDING ASSEMBLY 11.55

53 10SRL WORM SHAFT GEAR 3.85

55 10SSP LEVEL-WIND PIPE 1.65

56 101GT O-RING 1.65

58 104BC CLUTCH YOKE SPRING 1.10

60 10LVE FIXING BOLT 1.10

61 10F3X CLUTCH CAM PUSH PLATE 3.85

62 10190 WASHER 1.65

67 10559 FIXING BOLT 1.65

68 10S57 FIXING BOLT 1.65

71 105NB E TYPE RETAINING RING 1.5 1.10

72 10SXB FIXING BOLT 1.65

76 10MPD FIXING BOLT 1.10

77 10QSE LEVEL WINDING GUIDE 1.65

78 10S42 WASHER 2.75

79 105NC E TYPE RETAINING RING 2 1.10

80 108PY FRAME TALLY WASHER 1.65

81 10LHY FIXING BOLT 1.65

82 10SXA FIXING BOLT 1.65

84 13GG7 SPOOL ASSEMBLY 67.65

85 10EX5 SPOOL SHAFT CONTACT B 1.10

86 101DR BRAKE PIPE GEAR 9.35

87 100GW O-RING 1.65

88 10L1Q FIXING BOLT 1.10

90 10042 WASHER 2.75

92 10040 WASHER 2.75

93 10GQZ CLICK SPRING 1.10

94 103LE FIXING BOLT 1.10

95 108WS O-RING 4 X 6 1.10

97 103L7 FIXING BOLT 1.10

98 10CLF INTERMEDIATE GEAR 1.65

99 10KNH DAMPER SPRING 1.65

104 1023S WASHER 2.75

201 10FMM HANDLE CAP 1.65

205 10ST0 WORM SHAFT 2.75

208 13HVK HANDLE 22.55

401 13V30 HANDLE FIXING NUT 2.75

403 13V3M STAR DRAG 11.55

404 10A3U STAR DRAG FIXING NUT 3.85

407 10EBF DRIVE GEAR SHAFT 11.55

408 13SH0 LEVEL WINDING GUARD 6.05

411 10EB3 CLUTCH CAM 2.75

412 1003W CLUTCH CLAW ASSEMBLY 3.85

413 104CQ CLUTCH CLAW SPRING 1.65

414 10EBC CLUTCH PLATE 4.95

415 10EBG BODY A SEAT 3.85

416 13G9T FRAME ASSEMBLY 56.10

417 10EBK CLUTCH LEVER RECEIVING CASE (B) 1.65

418 13H68 CLUTCH LEVER 6.05

419 10EB4 CLUTCH LEVER SEAT (A) 1.65

420 10041 FRAME B RECEIVER ASSEMBLY 17.05

421 10EB7 BODY B CAM LEVER 1.65

422 10263 BRAKE DIAL 3.85

423 13FSU BODY B 11.55

425 1003U WASHER 2.75

502 13JCN HANDLE ASSEMBLY 67.65

503 13TWS BODY A 22.55

504 10EB5 DRIVE GEAR 22.55

506 10EB9 PINION GEAR 11.55

507 1046W CLUTCH YOKE 1.65

508 13AYN HANDLE KNOB 11.55

BSM1 1019F BRAKE SHOES 1.10

BST1 13SFU BRAKE SHAFT 1.10

PUNT 13JR2 INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORIES) 1.65

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 19 Scorpion MGL 150 HG Product code: 040336 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:43:33+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.84 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/4540

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "30 / ROLLER CLUTCH" , they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10R1Q FIXING BOLT 1.65

2 10SSK RETAINER 3.85

3 13V31 HANDLE FIXING NUT 2.75

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 1003Z WASHER 2.75

8 10PXZ HANDLE KNOB BUSHING 1.65

10 10KXW STAR DRAG CLICK PLATE 1.65

11 10J26 STAR DRAG CLICK PLATE 1.65

12 10MFC CLICK PIN 1.65

13 10BT2 CLICK SPRING 1.65

14 13V3L STAR DRAG 11.55

15 10A70 STAR DRAG SPRING 2.75

16 10A3T STAR DRAG FIXING NUT 3.85

17 10J1N STAR DRAG SPACER 1.65

18 109F5 DRIVE GEAR WASHER 1.65

19 105PW STAR DRAG BEARING WASHER 1.10

20 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

21 13U1N MECHANICAL BRAKE KNOB 9.35

22 10896 MECHANICAL BRAKE WASHER 1.10

23 1085F MECHANICAL BRAKE WASHER 1.10

24 1054D BEARING PULL-OUT STOPPER 1.10

25 105C0 BALL BEARING (3 X 10 X 4) 13.75

26 10EYS BEARING SPACER 2.75

27 105BP BALL BEARING (5 X 9 X 3) 13.75

28 108WK O-RING SM14 1.65

30 10F33 ROLLER CLUTCH *Cannot be ordered 22.55

31 10SRM ROLLER CLUTCH INNER TUBE 6.05

32 10SSR STAR DRAG PLATE 2.75

33 10SSF STAR DRAG WASHER 11.55

35 1023U STAR DRAG WASHER 6.05

36 10SSJ STOPPER GEAR 6.05

37 10SG7 DRIVE GEAR SHAFT 11.55

38 10HJG PIN FOR WORM SHAFT GEAR 1.65

39 10JDY SPRING FOR WORM SHAFT GEAR 1.65

40 101K8 WORM SHAFT GEAR 3.85

41 10S3Y FIXING BOLT 1.10

42 109T1 DRIVE GEAR SHAFT FIXING PLATE 2.75

43 10DQF DRIVE GEAR SHAFT BUSHING 1.65

44 1003V WASHER 2.75

45 105NK E TYPE STOP RING 2.5 1.10

46 13SGZ LEVEL WINDING GUARD 6.05

47 10LCQ FIXING BOLT 1.10

48 10FJB LEVEL WINDING RECEIVER 1.65

49 1003S WORM SHAFT PIN 2.75

50 10BHQ WORM SHAFT PIN 2.75

51 108WQ O-RING 1.65

52 101E0 LEVEL WINDING ASSEMBLY 11.55

53 10SRL WORM SHAFT GEAR 3.85

55 10SSP LEVEL-WIND PIPE 1.65

56 101GT O-RING 1.65

58 104BC CLUTCH YOKE SPRING 1.10

60 10LVE FIXING BOLT 1.10

61 10F3X CLUTCH CAM PUSH PLATE 3.85

62 10190 WASHER 1.65

63 10SG1 CLUTCH CAM 2.75

64 10MQN CLUTCH CLAW 3.85

65 104CN CLUTCH CLAW SPRING 1.65

66 10SSV CLUTCH PLATE 4.95

67 10559 FIXING BOLT 1.65

68 10S57 FIXING BOLT 1.65

69 10SST BODY A SEAT 3.85

70 13G9R FRAME ASSEMBLY 56.10

71 105NB E TYPE STOP RING 1.5 1.10

72 10SXB FIXING BOLT 1.65

73 10SG5 CLUTCH LEVER RECEIVER (B) 1.65

74 13H67 CLUTCH LEVER 6.05

75 10SRK CLUTCH LEVER HOLDER (A) 1.65

76 10MPD FIXING BOLT 1.10

77 10QSE LEVEL WINDING GUIDE 1.65

78 10S42 WASHER 2.75

79 105NC E TYPE RETAINING RING 2 1.10

80 108PY FRAME TATARI WASHER 1.65

81 10LHY FIXING BOLT 1.65

82 10SXA FIXING BOLT 1.65

84 13GG7 SPOOL ASSEMBLY 67.65

85 10EX5 SPOOL SHAFT CONTACT B 1.10

86 101DR BRAKE PIPE GEAR 9.35

87 100GW O-RING 1.65

88 10L1Q FIXING BOLT 1.10

89 10DSB FRAME B RECEIVING ASSEMBLY 17.05

90 10042 WASHER 2.75

91 10SG6 BODY B CAM LEVER 1.65

92 10040 CAM LEVER WASHER 2.75

93 10GQZ CLICK SPRING 1.10

94 103LE FIXING BOLT 1.10

95 108WS O-RING 4 X 6 1.10

96 10SAZ BR KNOB 3.85

97 103L7 FIXING BOLT 1.10

98 10CLF INTERMEDIATE GEAR 1.65

99 10KNH DAMPER SPRING 1.65

100 13FSS BODY B 11.55

104 1023S WASHER 2.75

201 10FMM HANDLE CAP 1.65

202 13JCQ HANDLE ASSEMBLY 67.65

203 13TWP BODY A 22.55

204 10ST3 DRIVE GEAR 22.55

205 10ST0 WORM SHAFT 2.75

206 10SGC PINION GEAR 11.55

207 1046V CLUTCH YOKE 1.65

208 13HVK HANDLE 22.55

209 13AYM HANDLE KNOB 11.55

BSM1 1019F BRAKE SHOES 1.10

BST1 13SFU BRAKE SHAFT 1.10

PUNT 13JR2 INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORIES) 1.65

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 19 Scorpion MGL 151 Product code: 040329 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:42:46+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.84 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/4540

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "30 / ROLLER CLUTCH" , they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10R1Q FIXING BOLT 1.65

2 10SSK RETAINER 3.85

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 1003Z WASHER 2.75

8 10PXZ HANDLE KNOB BUSHING 1.65

10 10KXW STAR DRAG CLICK PLATE 1.65

11 10J26 STAR DRAG CLICK PLATE 1.65

12 10MFC CLICK PIN 1.65

13 10BT2 CLICK SPRING 1.65

15 10A70 STAR DRAG SPRING 2.75

17 10J1N STAR DRAG SPACER 1.65

18 109F5 DRIVE GEAR WASHER 1.65

19 105PW STAR DRAG BEARING WASHER 1.10

20 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

21 13U1N MECHANICAL BRAKE KNOB 9.35

22 10896 MECHANICAL BRAKE WASHER 1.10

23 1085F MECHANICAL BRAKE WASHER 1.10

24 1054D BEARING PULL-OUT STOPPER 1.10

25 105C0 BALL BEARING (3 X 10 X 4) 13.75

26 10EYS BEARING SPACER 2.75

27 105BP BALL BEARING (5 X 9 X 3) 13.75

28 108WK O-RING SM14 1.65

30 10F33 ROLLER CLUTCH *Cannot be ordered 22.55

31 10SRM ROLLER CLUTCH INNER TUBE 6.05

32 10SSR STAR DRAG PLATE 2.75

33 10SSF STAR DRAG WASHER 11.55

35 1023U STAR DRAG WASHER 6.05

36 10SSJ STOPPER GEAR 6.05

38 10HJG PIN FOR WORM SHAFT GEAR 1.65

39 10JDY SPRING FOR WORM SHAFT GEAR 1.65

40 101K8 WORM SHAFT GEAR 3.85

41 10S3Y FIXING BOLT 1.10

42 109T1 DRIVE GEAR SHAFT FIXING PLATE 2.75

43 10DQF DRIVE GEAR SHAFT BUSHING 1.65

44 1003V WASHER 2.75

45 105NK E TYPE STOP RING 2.5 1.10

47 10LCQ FIXING BOLT 1.10

48 10FJB LEVEL WINDING RECEIVER 1.65

49 1003S WORM SHAFT PIN 2.75

50 10BHQ WORM SHAFT PIN 2.75

51 108WQ O-RING 1.65

52 101E0 LEVEL WINDING ASSEMBLY 11.55

53 10SRL WORM SHAFT GEAR 3.85

55 10SSP LEVEL-WIND PIPE 1.65

56 101GT O-RING 1.65

58 104BC CLUTCH YOKE SPRING 1.10

60 10LVE FIXING BOLT 1.10

61 10F3X CLUTCH CAM PUSH PLATE 3.85

62 10190 WASHER 1.65

67 10559 FIXING BOLT 1.65

68 10S57 FIXING BOLT 1.65

71 105NB E TYPE RETAINING RING 1.5 1.10

72 10SXB FIXING BOLT 1.65

76 10MPD FIXING BOLT 1.10

77 10QSE LEVEL WINDING GUIDE 1.65

78 10S42 WASHER 2.75

79 105NC E TYPE RETAINING RING 2 1.10

80 108PY FRAME TALLY WASHER 1.65

81 10LHY FIXING BOLT 1.65

82 10SXA FIXING BOLT 1.65

84 13GG7 SPOOL ASSEMBLY 67.65

85 10EX5 SPOOL SHAFT CONTACT B 1.10

86 101DR BRAKE PIPE GEAR 9.35

87 100GW O-RING 1.65

88 10L1Q FIXING BOLT 1.10

90 10042 WASHER 2.75

92 10040 WASHER 2.75

93 10GQZ CLICK SPRING 1.10

94 103LE FIXING BOLT 1.10

95 108WS O-RING 4 X 6 1.10

97 103L7 FIXING BOLT 1.10

98 10CLF INTERMEDIATE GEAR 1.65

99 10KNH DAMPER SPRING 1.65

104 1023S WASHER 2.75

201 10FMM HANDLE CAP 1.65

205 10ST0 WORM SHAFT 2.75

208 13HVK HANDLE 22.55

401 13V30 HANDLE FIXING NUT 2.75

403 13V3M STAR DRAG 11.55

404 10A3U STAR DRAG FIXING NUT 3.85

407 10EBF DRIVE GEAR SHAFT 11.55

408 13SH0 LEVEL WINDING GUARD 6.05

411 10EB3 CLUTCH CAM 2.75

412 1003W CLUTCH CLAW ASSEMBLY 3.85

413 104CQ CLUTCH CLAW SPRING 1.65

414 10EBC CLUTCH PLATE 4.95

415 10EBG BODY A SEAT 3.85

416 13G9T FRAME ASSEMBLY 56.10

417 10EBK CLUTCH LEVER RECEIVING CASE (B) 1.65

418 13H68 CLUTCH LEVER 6.05

419 10EB4 CLUTCH LEVER SEAT (A) 1.65

420 10041 FRAME B RECEIVER ASSEMBLY 17.05

421 10EB7 BODY B CAM LEVER 1.65

422 10263 BRAKE DIAL 3.85

423 13FSU BODY B 11.55

425 1003U WASHER 2.75

502 13JCN HANDLE ASSEMBLY 67.65

507 1046W CLUTCH YOKE 1.65

508 13AYN HANDLE KNOB 11.55

601 13TWT BODY A 22.55

602 101AP DRIVE GEAR 22.55

603 10DH6 PINION GEAR 11.55

BSM1 1019F BRAKE SHOES 1.10

BST1 13SFU BRAKE SHAFT 1.10

PUNT 13JR2 INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORY) 1.65

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 19 Scorpion MGL 150 Product code: 040312 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:41:56+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.84 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/4540

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "30 / ROLLER CLUTCH" , they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10R1Q FIXING BOLT 1.65

2 10SSK RETAINER 3.85

3 13V31 HANDLE FIXING NUT 2.75

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 1003Z WASHER 2.75

8 10PXZ HANDLE KNOB BUSHING 1.65

10 10KXW STAR DRAG CLICK PLATE 1.65

11 10J26 STAR DRAG CLICK PLATE 1.65

12 10MFC CLICK PIN 1.65

13 10BT2 CLICK SPRING 1.65

14 13V3L STAR DRAG 11.55

15 10A70 STAR DRAG SPRING 2.75

16 10A3T STAR DRAG FIXING NUT 3.85

17 10J1N STAR DRAG SPACER 1.65

18 109F5 DRIVE GEAR WASHER 1.65

19 105PW STAR DRAG BEARING WASHER 1.10

20 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

21 13U1N MECHANICAL BRAKE KNOB 9.35

22 10896 MECHANICAL BRAKE WASHER 1.10

23 1085F MECHANICAL BRAKE WASHER 1.10

24 1054D BEARING PULL-OUT STOPPER 1.10

25 105C0 BALL BEARING (3 X 10 X 4) 13.75

26 10EYS BEARING SPACER 2.75

27 105BP BALL BEARING (5 X 9 X 3) 13.75

28 108WK O-RING SM14 1.65

30 10F33 ROLLER CLUTCH *Cannot be ordered 22.55

31 10SRM ROLLER CLUTCH INNER TUBE 6.05

32 10SSR STAR DRAG PLATE 2.75

33 10SSF STAR DRAG WASHER 11.55

35 1023U STAR DRAG WASHER 6.05

36 10SSJ STOPPER GEAR 6.05

37 10SG7 DRIVE GEAR SHAFT 11.55

38 10HJG PIN FOR WORM SHAFT GEAR 1.65

39 10JDY SPRING FOR WORM SHAFT GEAR 1.65

40 101K8 WORM SHAFT GEAR 3.85

41 10S3Y FIXING BOLT 1.10

42 109T1 DRIVE GEAR SHAFT FIXING PLATE 2.75

43 10DQF DRIVE GEAR SHAFT BUSHING 1.65

44 1003V WASHER 2.75

45 105NK E TYPE STOP RING 2.5 1.10

46 13SGZ LEVEL WINDING GUARD 6.05

47 10LCQ FIXING BOLT 1.10

48 10FJB LEVEL WINDING RECEIVER 1.65

49 1003S WORM SHAFT PIN 2.75

50 10BHQ WORM SHAFT PIN 2.75

51 108WQ O-RING 1.65

52 101E0 LEVEL WINDING ASSEMBLY 11.55

53 10SRL WORM SHAFT GEAR 3.85

55 10SSP LEVEL-WIND PIPE 1.65

56 101GT O-RING 1.65

58 104BC CLUTCH YOKE SPRING 1.10

60 10LVE FIXING BOLT 1.10

61 10F3X CLUTCH CAM PUSH PLATE 3.85

62 10190 WASHER 1.65

63 10SG1 CLUTCH CAM 2.75

64 10MQN CLUTCH CLAW 3.85

65 104CN CLUTCH CLAW SPRING 1.65

66 10SSV CLUTCH PLATE 4.95

67 10559 FIXING BOLT 1.65

68 10S57 FIXING BOLT 1.65

69 10SST BODY A SEAT 3.85

70 13G9R FRAME ASSEMBLY 56.10

71 105NB E TYPE STOP RING 1.5 1.10

72 10SXB FIXING BOLT 1.65

73 10SG5 CLUTCH LEVER RECEIVER (B) 1.65

74 13H67 CLUTCH LEVER 6.05

75 10SRK CLUTCH LEVER HOLDER (A) 1.65

76 10MPD FIXING BOLT 1.10

77 10QSE LEVEL WINDING GUIDE 1.65

78 10S42 WASHER 2.75

79 105NC E TYPE RETAINING RING 2 1.10

80 108PY FRAME TATARI WASHER 1.65

81 10LHY FIXING BOLT 1.65

82 10SXA FIXING BOLT 1.65

84 13GG7 SPOOL ASSEMBLY 67.65

85 10EX5 SPOOL SHAFT CONTACT B 1.10

86 101DR BRAKE PIPE GEAR 9.35

87 100GW O-RING 1.65

88 10L1Q FIXING BOLT 1.10

89 10DSB FRAME B RECEIVING ASSEMBLY 17.05

90 10042 WASHER 2.75

91 10SG6 BODY B CAM LEVER 1.65

92 10040 CAM LEVER WASHER 2.75

93 10GQZ CLICK SPRING 1.10

94 103LE FIXING BOLT 1.10

95 108WS O-RING 4 X 6 1.10

96 10SAZ BR KNOB 3.85

97 103L7 FIXING BOLT 1.10

98 10CLF INTERMEDIATE GEAR 1.65

99 10KNH DAMPER SPRING 1.65

100 13FSS BODY B 11.55

104 1023S WASHER 2.75

201 10FMM HANDLE CAP 1.65

202 13JCQ HANDLE ASSEMBLY 67.65

205 10ST0 WORM SHAFT 2.75

207 1046V CLUTCH YOKE 1.65

208 13HVK HANDLE KNOB 22.55

209 13AYM HANDLE KNOB 11.55

301 13TWQ BODY A 22.55

302 10SGD DRIVE GEAR 22.55

303 10SGW PINION GEAR 11.55

BSM1 1019F BRAKE SHOE 1.10

BST1 13SFU BRAKE SHAFT 1.10

PUNT 13JR2 INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORY) 1.65

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 21 Scorpion DC 21 151XG Product code: 043115 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:40:40+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.85 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/5007

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "32 / ROLLER CLUTCH" , they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10R1Q FIXING BOLTS 1.65

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 104FH WASHER 2.20

9 10PXZ HANDLE KNOB BUSHING 1.65

12 10KXW STAR DRAG CLICK PLATE 1.65

13 10J26 STAR DRAG CLICK PLATE 1.65

14 10MFC CLICK PIN 1.65

15 10BT2 CLICK SPRING 1.65

16 13V4C STAR DRAG 16.50

17 10A70 STAR DRAG SPRING 2.75

19 10J1N STAR DRAG SPACER 1.65

20 109F5 DRIVE GEAR WASHER 1.65

21 105PW STAR DRAG BEARING WASHER 1.10

22 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

23 13U1N MECHANICAL BRAKE KNOB 9.35

24 10896 MECHANICAL BRAKE WASHER 1.10

25 1085F MECHANICAL BRAKE WASHER 1.10

26 1054D BEARING PULL-OUT STOPPER 1.10

27 105C0 BALL BEARING (3 X 10 X 4) 13.75

28 10EYS BEARING SPACER 2.75

29 105BP BALL BEARING (5 X 9 X 3) 13.75

30 108WK O-RING SM14 1.65

32 10F33 ROLLER CLUTCH *Cannot be ordered 22.55

33 10SRM ROLLER CLUTCH INNER TUBE 6.05

34 10D54 STAR DRAG PLATE 3.85

35 13UT5 STAR DRAG WASHER 3.85

37 1023U STAR DRAG WASHER 6.05

40 10JDY SPRING FOR WORM SHAFT GEAR 1.65

41 10HJG WORM SHAFT GEAR PINS 1.65

42 101K8 WORM SHAFT GEAR 3.85

43 10GR3 WASHER (7 X 10) 1.10

44 10S3Y FIXING BOLT 1.10

45 109T1 DRIVE GEAR SHAFT FIXING PLATE 2.75

46 10DQF DRIVE GEAR SHAFT BUSH 1.65

47 10G6D WASHER 1.65

48 105NK E TYPE STOP RING 2.5 1.10

49 10SRL WORM SHAFT GEAR 3.85

51 10SSP LEVEL-WIND PIPE 1.65

52 101GT O-RING 1.65

54 104BC CLUTCH YOKE SPRING 1.10

56 10LVE FIXING BOLT 1.10

57 10F3X CLUTCH CAM PUSH PLATE 3.85

58 10190 WASHER 1.65

63 10559 FIXING BOLT 1.65

64 10S57 FIXING BOLT 1.65

66 10MPD FIXING BOLT 1.10

71 10FJB LEVEL WINDING RECEIVING PLATE 1.65

72 10CFU WORM SHAFT PIN 1.10

73 10BHQ WORM SHAFT PIN 2.75

74 108WQ O-RING 1.65

75 101E0 LEVEL WINDING ASSEMBLY 11.55

77 10LCQ FIXING BOLT 1.10

78 10FJZ WASHER 1.10

79 105NC E TYPE STOP RING 2 1.10

80 10QSE LEVEL WINDING GUIDE 1.65

81 10SXB FIXING BOLT 1.65

82 10LHY FIXING BOLT 1.65

83 108PY FRAME CONTACT WASHER 1.65

84 10SXA FIXING BOLT 1.65

85 13GP9 SPOOL ASSEMBLY 84.15

86 10E8P FIXING BOLT 1.65

88 101M9 BOARD MOUNTING PLATE 2.75

90 10B94 BEARING SEAL 1.65

91 10EX5 SPOOL SHAFT CONTACT B 1.10

92 13RUQ FRAME B RECEIVER 11.00

93 104N5 BODY B CAM LEVER ADJUSTMENT WASHER 1.65

95 108EZ B BEARING ADJUSTMENT WASHER 1.10

97 103LE FIXING BOLT 1.10

98 10GAA CAM LEVER ADJUSTING WASHER 1.10

103 100SE CAM LEVER ADJUSTMENT WASHER 1.10

301 100NC HANDLE CAP 1.65

303 13J25 HANDLE SHAFT ASSEMBLY 22.55

307 10SSS WORM SHAFT 2.75

310 10SSK RETAINER 3.85

401 10T0Z HANDLE FIXING NUT 2.75

402 10A3U STAR DRAG FIXING NUT 3.85

405 10EBF DRIVE GEAR SHAFT 11.55

408 10EB3 CLUTCH CAM 2.75

409 1003W CLUTCH CLAW ASSEMBLY 3.85

410 104CQ CLUTCH CLAW SPRING 1.65

411 10EBC CLUTCH PLATE 4.95

412 10EBG BODY A SEAT 3.85

413 13TDF CLUTCH LEVER SEAT (A) 1.10

414 13H6X CLUTCH LEVER ASSEMBLY 4.95

415 13TDG CLUTCH LEVER SEAT (B) 1.10

416 13SHX LEVEL WIND GUARD 2.75

417 13GHB FRAME ASSEMBLY 44.00

418 10ST5 BODY B SUBSTRATE SEAL 1.65

419 13RNQ BODY B CAM LEVER 1.10

420 13GHD MAGNET CAM ASSEMBLY 3.85

421 13FZP BRAKE DIAL 3.85

422 10ST4 SOUND EMISSION SHILLING 1.65

423 13FN1 MAIN UNIT B 7.15

424 13FTW BODY B ASSEMBLY 181.50

425 13RP1 BODY B SUBSTRATE ASSEMBLY 143.00

504 10SSJ STOPPER GEAR 6.05

601 10EBH HANDLE KNOB 11.55

602 13JDY HANDLE ASSEMBLY 67.65

603 13TXE BODY A 16.50

604 10EBM DRIVE GEAR 22.55

605 10EBD PINION GEAR 11.55

606 10DQC CLUTCH YOKE 1.65

PUNT 13JRJ INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORIES) 2.20

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 21 Scorpion DC 21 151HG Product code: 043092 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:39:54+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.85 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/5007

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "32 / ROLLER CLUTCH" , they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10R1Q FIXING BOLT 1.65

2 1017T RETAINER 3.85

4 1027R HANDLE CAP 2.75

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 104FH WASHER 2.20

8 10DW6 HANDLE KNOB 11.55

9 10PXZ HANDLE KNOB BUSH 1.65

10 13HWE HANDLE SHAFT ASSEMBLY 22.55

11 13JDW HANDLE ASSEMBLY 67.65

12 10KXW STAR DRAG CLICK PLATE 1.65

13 10J26 STAR DRAG CLICK PLATE 1.65

14 10MFC CLICK PIN 1.65

15 10BT2 CLICK SPRING 1.65

16 13V4C STAR DRAG 16.50

17 10A70 STAR DRAG SPRING 2.75

19 10J1N STAR DRAG SPACER 1.65

20 109F5 DRIVE GEAR WASHER 1.65

21 105PW STAR DRAG BEARING WASHER 1.10

22 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

23 13U1N MECHANICAL BRAKE KNOB 9.35

24 10896 MECHANICAL BRAKE WASHER 1.10

25 1085F MECHANICAL BRAKE WASHER 1.10

26 1054D BEARING PULL-OUT STOPPER 1.10

27 105C0 BALL BEARING (3 X 10 X 4) 13.75

28 10EYS BEARING SPACER 2.75

29 105BP BALL BEARING (5 X 9 X 3) 13.75

30 108WK O-RING SM14 1.65

32 10F33 ROLLER CLUTCH *Cannot be ordered 22.55

33 10SRM ROLLER CLUTCH INNER TUBE 6.05

34 10D54 STAR DRAG PLATE 3.85

35 13UT5 STAR DRAG WASHER 3.85

37 1023U STAR DRAG WASHER 6.05

40 10JDY SPRING FOR WORM SHAFT GEAR 1.65

41 10HJG WORM SHAFT GEAR PINS 1.65

42 101K8 WORM SHAFT GEAR 3.85

43 10GR3 WASHER (7 X 10) 1.10

44 10S3Y FIXING BOLT 1.10

45 109T1 DRIVE GEAR SHAFT FIXING PLATE 2.75

46 10DQF DRIVE GEAR SHAFT BUSH 1.65

47 10G6D WASHER 1.65

48 105NK E TYPE STOP RING 2.5 1.10

49 10SRL WORM SHAFT GEAR 3.85

50 10ST0 WORM SHAFT 2.75

51 10SSP LEVEL WINDING PIPE 1.65

52 101GT O-RING 1.65

54 104BC CLUTCH YOKE SPRING 1.10

56 10LVE FIXING BOLT 1.10

57 10F3X CLUTCH CAM PUSH PLATE 3.85

58 10190 WASHER 1.65

63 10559 FIXING BOLT 1.65

64 10S57 FIXING BOLT 1.65

66 10MPD FIXING BOLT 1.10

71 10FJB LEVEL WINDING RECEIVING PLATE 1.65

72 10CFU WORM SHAFT PIN 1.10

73 10BHQ WORM SHAFT PIN 2.75

74 108WQ O-RING 1.65

75 101E0 LEVEL WINDING ASSEMBLY 11.55

77 10LCQ FIXING BOLT 1.10

78 10FJZ WASHER 1.10

79 105NC E TYPE STOP RING 2 1.10

80 10QSE LEVEL WINDING GUIDE 1.65

81 10SXB FIXING BOLT 1.65

82 10LHY FIXING BOLT 1.65

83 108PY FRAME CONTACT WASHER 1.65

84 10SXA FIXING BOLT 1.65

85 13GP9 SPOOL ASSEMBLY 84.15

86 10E8P FIXING BOLT 1.65

88 101M9 BOARD MOUNTING PLATE 2.75

90 10B94 BEARING SEAL 1.65

91 10EX5 SPOOL SHAFT CONTACT B 1.10

92 13RUQ FRAME B RECEIVER 11.00

93 104N5 BODY B CAM LEVER ADJUSTMENT WASHER 1.65

95 108EZ B BEARING ADJUSTMENT WASHER 1.10

97 103LE FIXING BOLT 1.10

98 10GAA CAM LEVER ADJUSTING WASHER 1.10

103 100SE CAM LEVER ADJUSTMENT WASHER 1.10

401 10T0Z HANDLE FIXING NUT 2.75

402 10A3U STAR DRAG FIXING NUT 3.85

405 10EBF DRIVE GEAR SHAFT 11.55

407 1046W CLUTCH YOKE 1.65

408 10EB3 CLUTCH CAM 2.75

409 1003W CLUTCH CLAW ASSEMBLY 3.85

410 104CQ CLUTCH CLAW SPRING 1.65

411 10EBC CLUTCH PLATE 4.95

412 10EBG BODY A SEAT 3.85

413 13TDF CLUTCH LEVER SEAT (A) 1.10

414 13H6X CLUTCH LEVER ASSEMBLY 4.95

415 13TDG CLUTCH LEVER SEAT (B) 1.10

416 13SHX LEVEL WIND GUARD 2.75

417 13GHB FRAME ASSEMBLY 44.00

418 10ST5 BODY B SUBSTRATE SEAL 1.65

419 13RNQ BODY B CAM LEVER 1.10

420 13GHD MAGNET CAM ASSEMBLY 3.85

421 13FZP BRAKE DIAL 3.85

422 10ST4 SOUND EMISSION SHILLING 1.65

423 13FN1 MAIN UNIT B 7.15

424 13FTW BODY B ASSEMBLY 181.50

425 13RP1 MAIN UNIT B BOARD ASSEMBLY 143.00

501 13TXF BODY A 16.50

502 10EB5 DRIVE GEAR 22.55

503 10EB9 PINION GEAR 11.55

504 10SSJ STOPPER GEAR 6.05

PUNT 13JRJ INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORIES) 2.20

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 21 Scorpion DC 21 151 Product code: 043078 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:39:02+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.85 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/5007

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "32 / ROLLER CLUTCH" , they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10R1Q FIXING BOLT 1.65

2 1017T RETAINER 3.85

4 1027R HANDLE CAP 2.75

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 104FH WASHER 2.20

8 10DW6 HANDLE KNOB 11.55

9 10PXZ HANDLE KNOB BUSH 1.65

10 13HWE HANDLE SHAFT ASSEMBLY 22.55

11 13JDW HANDLE ASSEMBLY 67.65

12 10KXW STAR DRAG CLICK PLATE 1.65

13 10J26 STAR DRAG CLICK PLATE 1.65

14 10MFC CLICK PIN 1.65

15 10BT2 CLICK SPRING 1.65

16 13V4C STAR DRAG 16.50

17 10A70 STAR DRAG SPRING 2.75

19 10J1N STAR DRAG SPACER 1.65

20 109F5 DRIVE GEAR WASHER 1.65

21 105PW STAR DRAG BEARING WASHER 1.10

22 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

23 13U1N MECHANICAL BRAKE KNOB 9.35

24 10896 MECHANICAL BRAKE WASHER 1.10

25 1085F MECHANICAL BRAKE WASHER 1.10

26 1054D BEARING PULL-OUT STOPPER 1.10

27 105C0 BALL BEARING (3 X 10 X 4) 13.75

28 10EYS BEARING SPACER 2.75

29 105BP BALL BEARING (5 X 9 X 3) 13.75

30 108WK O-RING SM14 1.65

32 10F33 ROLLER CLUTCH *Cannot be ordered 22.55

33 10SRM ROLLER CLUTCH INNER TUBE 6.05

34 10D54 STAR DRAG PLATE 3.85

35 13UT5 STAR DRAG WASHER 3.85

37 1023U STAR DRAG WASHER 6.05

38 13USS STOPPER GEAR 6.05

40 10JDY SPRING FOR WORM SHAFT GEAR 1.65

41 10HJG WORM SHAFT GEAR PINS 1.65

42 101K8 WORM SHAFT GEAR 3.85

43 10GR3 WASHER (7 X 10) 1.10

44 10S3Y FIXING BOLT 1.10

45 109T1 DRIVE GEAR SHAFT FIXING PLATE 2.75

46 10DQF DRIVE GEAR SHAFT BUSH 1.65

47 10G6D WASHER 1.65

48 105NK E TYPE STOP RING 2.5 1.10

49 10SRL WORM SHAFT GEAR 3.85

50 10ST0 WORM SHAFT 2.75

51 10SSP LEVEL WINDING PIPE 1.65

52 101GT O-RING 1.65

54 104BC CLUTCH YOKE SPRING 1.10

56 10LVE FIXING BOLT 1.10

57 10F3X CLUTCH CAM PUSH PLATE 3.85

58 10190 WASHER 1.65

63 10559 FIXING BOLT 1.65

64 10S57 FIXING BOLT 1.65

66 10MPD FIXING BOLT 1.10

71 10FJB LEVEL WINDING RECEIVING PLATE 1.65

72 10CFU WORM SHAFT PIN 1.10

73 10BHQ WORM SHAFT PIN 2.75

74 108WQ O-RING 1.65

75 101E0 LEVEL WINDING ASSEMBLY 11.55

77 10LCQ FIXING BOLT 1.10

78 10FJZ WASHER 1.10

79 105NC E TYPE STOP RING 2 1.10

80 10QSE LEVEL WINDING GUIDE 1.65

81 10SXB FIXING BOLT 1.65

82 10LHY FIXING BOLT 1.65

83 108PY FRAME CONTACT WASHER 1.65

84 10SXA FIXING BOLT 1.65

85 13GP9 SPOOL ASSEMBLY 84.15

86 10E8P FIXING BOLT 1.65

88 101M9 BOARD MOUNTING PLATE 2.75

90 10B94 BEARING SEAL 1.65

91 10EX5 SPOOL SHAFT CONTACT B 1.10

92 13RUQ FRAME B RECEIVER 11.00

93 104N5 BODY B CAM LEVER ADJUSTMENT WASHER 1.65

95 108EZ B BEARING ADJUSTMENT WASHER 1.10

97 103LE FIXING BOLT 1.10

98 10GAA CAM LEVER ADJUSTING WASHER 1.10

103 100SE CAM LEVER ADJUSTMENT WASHER 1.10

401 10T0Z HANDLE FIXING NUT 2.75

402 10A3U STAR DRAG FIXING NUT 3.85

403 13TXD BODY A 16.50

404 101AP DRIVE GEAR 22.55

405 10EBF DRIVE GEAR SHAFT 11.55

406 10DH6 PINION GEAR 11.55

407 1046W CLUTCH YOKE 1.65

408 10EB3 CLUTCH CAM 2.75

409 1003W CLUTCH CLAW ASSEMBLY 3.85

410 104CQ CLUTCH CLAW SPRING 1.65

411 10EBC CLUTCH PLATE 4.95

412 10EBG BODY A SEAT 3.85

413 13TDF CLUTCH LEVER SEAT (A) 1.10

414 13H6X CLUTCH LEVER ASSEMBLY 4.95

415 13TDG CLUTCH LEVER SEAT (B) 1.10

416 13SHX LEVEL WIND GUARD 2.75

417 13GHB FRAME ASSEMBLY 44.00

418 10ST5 BODY B SUBSTRATE SEAL 1.65

419 13RNQ BODY B CAM LEVER 1.10

420 13GHD MAGNET CAM ASSEMBLY 3.85

421 13FZP BRAKE DIAL 3.85

422 10ST4 SOUND EMISSION SHILLING 1.65

423 13FN1 MAIN UNIT B 7.15

424 13FTW BODY B ASSEMBLY 181.50

425 13RP1 MAIN UNIT B CIRCUIT BOARD ASSEMBLY 143.00

PUNT 13JRJ INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORY) 2.20

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 21 Scorpion DC 21 150XG Product code: 043108 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:38:10+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.85 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/5007

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "32 / ROLLER CLUTCH" , they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10R1Q FIXING BOLT 1.65

3 10EBA HANDLE FIXING NUT 2.75

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 104FH WASHER 2.20

9 10PXZ HANDLE KNOB BUSHING 1.65

12 10KXW STAR DRAG CLICK PLATE 1.65

13 10J26 STAR DRAG CLICK PLATE 1.65

14 10MFC CLICK PIN 1.65

15 10BT2 CLICK SPRING 1.65

16 13V49 STAR DRAG 16.50

17 10A70 STAR DRAG SPRING 2.75

18 10A3T STAR DRAG FIXING NUT 3.85

19 10J1N STAR DRAG SPACER 1.65

20 109F5 DRIVE GEAR WASHER 1.65

21 105PW STAR DRAG BEARING WASHER 1.10

22 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

23 13U1N MECHANICAL BRAKE KNOB 9.35

24 10896 MECHANICAL BRAKE WASHER 1.10

25 1085F MECHANICAL BRAKE WASHER 1.10

26 1054D BEARING PULL-OUT STOPPER 1.10

27 105C0 BALL BEARING (3 X 10 X 4) 13.75

28 10EYS BEARING SPACER 2.75

29 105BP BALL BEARING (5 X 9 X 3) 13.75

30 108WK O-RING SM14 1.65

32 10F33 ROLLER CLUTCH *Cannot be ordered 22.55

33 10SRM ROLLER CLUTCH INNER TUBE 6.05

34 10D54 STAR DRAG PLATE 3.85

35 13UT5 STAR DRAG WASHER 3.85

37 1023U STAR DRAG WASHER 6.05

38 13USS STOPPER GEAR 6.05

39 10SG7 DRIVE GEAR SHAFT 11.55

40 10JDY SPRING FOR WORM SHAFT GEAR 1.65

41 10HJG WORM SHAFT GEAR PINS 1.65

42 101K8 WORM SHAFT GEAR 3.85

43 10GR3 WASHER (7 X 10) 1.10

44 10S3Y FIXING BOLT 1.10

45 109T1 DRIVE GEAR SHAFT FIXING PLATE 2.75

46 10DQF DRIVE GEAR SHAFT BUSH 1.65

47 10G6D WASHER 1.65

48 105NK E TYPE STOP RING 2.5 1.10

49 10SRL WORM SHAFT GEAR 3.85

51 10SSP LEVEL-WIND PIPE 1.65

52 101GT O-RING 1.65

54 104BC CLUTCH YOKE SPRING 1.10

56 10LVE FIXING BOLT 1.10

57 10F3X CLUTCH CAM PUSH PLATE 3.85

58 10190 WASHER 1.65

59 10SG1 CLUTCH CAM 2.75

60 101M5 CLUTCH CLAW 3.85

61 104CN CLUTCH CLAW SPRING 1.65

62 10SSV CLUTCH PLATE 4.95

63 10559 FIXING BOLT 1.65

64 10S57 FIXING BOLT 1.65

65 10SST BODY A SEAT 3.85

66 10MPD FIXING BOLT 1.10

67 13TDC CLUTCH LEVER RECEIVER (A) 1.10

68 13H6W CLUTCH LEVER ASSEMBLY 4.95

69 13TDD CLUTCH LEVER SEAT (B) 1.10

70 13SHT LEVEL WINDING GUARD 2.75

71 10FJB LEVEL WINDING RECEIVER 1.65

72 10CFU WASHER 1.10

73 10BHQ WORM SHAFT PIN 2.75

74 108WQ O-RING 1.65

75 101E0 LEVEL WINDING ASSEMBLY 11.55

76 13GBK FRAME ASSEMBLY 44.00

77 10LCQ FIXING BOLT 1.10

78 10FJZ WASHER 1.10

79 105NC E TYPE RETAINING RING 2 1.10

80 10QSE LEVEL WINDING GUIDE 1.65

81 10SXB FIXING BOLT 1.65

82 10LHY FIXING BOLT 1.65

83 108PY FRAME CONTACT WASHER 1.65

84 10SXA FIXING BOLT 1.65

85 13GP9 SPOOL ASSEMBLY 84.15

86 10E8P FIXING BOLT 1.65

87 101MK BODY B SUBSTRATE SEAL 1.65

88 101M9 SUBSTRATE MOUNTING PLATE 2.75

89 13RNN BODY B SUBSTRATE ASSEMBLY 143.00

90 10B94 BEARING SEAL 1.65

91 10EX5 SPOOL SHAFT CONTACT B 1.10

92 13RUQ FRAME B RECEIVER 11.00

93 104N5 BODY B CAM LEVER ADJUSTMENT WASHER 1.65

94 13RNL BODY B CAM LEVER 1.10

95 108EZ BODY B BEARING ADJUSTMENT WASHER 1.10

96 13GHC MAGNET CAM ASSEMBLY 3.85

97 103LE FIXING BOLT 1.10

98 10GAA CAM LEVER ADJUSTMENT WASHER 1.10

99 13FZN BRAKE DIAL 3.85

100 101WM SOUND EMISSION SHILLING 1.65

101 13FN0 BODY B 7.15

102 13FTV BODY B ASSEMBLY 181.50

103 100SE WASHER 1.10

301 100NC HANDLE CAP 1.65

302 10SSM HANDLE KNOB 11.55

303 13J25 HANDLE SHAFT ASSEMBLY 22.55

304 13JDX HANDLE ASSEMBLY 67.65

305 13TXA BODY A 16.50

306 10SRN DRIVE GEAR 22.55

307 10SSS WORM SHAFT 2.75

308 10SSL PINION GEAR 11.55

309 10TMB CLUTCH YOKE 1.65

310 10SSK RETAINER 3.85

PUNT 13JRJ INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORIES) 2.20

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 21 Scorpion DC 21 150HG Product code: 043085 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:37:16+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.85 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/5007

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "32 / ROLLER CLUTCH" , they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10R1Q FIXING BOLT 1.65

2 1017T RETAINER 3.85

3 10EBA HANDLE FIXING NUT 2.75

4 1027R HANDLE CAP 2.75

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 104FH WASHER 2.20

8 10DW6 HANDLE KNOB 11.55

9 10PXZ HANDLE KNOB BUSH 1.65

10 13HWE HANDLE SHAFT ASSEMBLY 22.55

11 13JDW HANDLE ASSEMBLY 67.65

12 10KXW STAR DRAG CLICK PLATE 1.65

13 10J26 STAR DRAG CLICK PLATE 1.65

14 10MFC CLICK PIN 1.65

15 10BT2 CLICK SPRING 1.65

16 13V49 STAR DRAG 16.50

17 10A70 STAR DRAG SPRING 2.75

18 10A3T STAR DRAG FIXING NUT 3.85

19 10J1N STAR DRAG SPACER 1.65

20 109F5 DRIVE GEAR WASHER 1.65

21 105PW STAR DRAG BEARING WASHER 1.10

22 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

23 13U1N MECHANICAL BRAKE KNOB 9.35

24 10896 MECHANICAL BRAKE WASHER 1.10

25 1085F MECHANICAL BRAKE WASHER 1.10

26 1054D BEARING PULL-OUT STOPPER 1.10

27 105C0 BALL BEARING (3 X 10 X 4) 13.75

28 10EYS BEARING SPACER 2.75

29 105BP BALL BEARING (5 X 9 X 3) 13.75

30 108WK O-RING SM14 1.65

32 10F33 ROLLER CLUTCH *Cannot be ordered 22.55

33 10SRM ROLLER CLUTCH INNER TUBE 6.05

34 10D54 STAR DRAG PLATE 3.85

35 13UT5 STAR DRAG WASHER 3.85

37 1023U STAR DRAG WASHER 6.05

38 13USS STOPPER GEAR 6.05

39 10SG7 DRIVE GEAR SHAFT 11.55

40 10JDY SPRING FOR WORM SHAFT GEAR 1.65

41 10HJG WORM SHAFT GEAR PINS 1.65

42 101K8 WORM SHAFT GEAR 3.85

43 10GR3 WASHER (7 X 10) 1.10

44 10S3Y FIXING BOLT 1.10

45 109T1 DRIVE GEAR SHAFT FIXING PLATE 2.75

46 10DQF DRIVE GEAR SHAFT BUSH 1.65

47 10G6D WASHER 1.65

48 105NK E TYPE STOP RING 2.5 1.10

49 10SRL WORM SHAFT GEAR 3.85

50 10ST0 WORM SHAFT 2.75

51 10SSP LEVEL WINDING PIPE 1.65

52 101GT O-RING 1.65

54 104BC CLUTCH YOKE SPRING 1.10

55 1046V CLUTCH YOKE 1.65

56 10LVE FIXING BOLT 1.10

57 10F3X CLUTCH CAM PUSH PLATE 3.85

58 10190 WASHER 1.65

59 10SG1 CLUTCH CAM 2.75

60 101M5 CLUTCH CLAW 3.85

61 104CN CLUTCH CLAW SPRING 1.65

62 10SSV CLUTCH PLATE 4.95

63 10559 FIXING BOLT 1.65

64 10S57 FIXING BOLT 1.65

65 10SST BODY A SEAT 3.85

66 10MPD FIXING BOLT 1.10

67 13TDC CLUTCH LEVER RECEIVER (A) 1.10

68 13H6W CLUTCH LEVER ASSEMBLY 4.95

69 13TDD CLUTCH LEVER SEAT (B) 1.10

70 13SHT LEVEL WINDING GUARD 2.75

71 10FJB LEVEL WINDING RECEIVER 1.65

72 10CFU WASHER 1.10

73 10BHQ WORM SHAFT PIN 2.75

74 108WQ O-RING 1.65

75 101E0 LEVEL WINDING ASSEMBLY 11.55

76 13GBK FRAME ASSEMBLY 44.00

77 10LCQ FIXING BOLT 1.10

78 10FJZ WASHER 1.10

79 105NC E TYPE RETAINING RING 2 1.10

80 10QSE LEVEL WINDING GUIDE 1.65

81 10SXB FIXING BOLT 1.65

82 10LHY FIXING BOLT 1.65

83 108PY FRAME CONTACT WASHER 1.65

84 10SXA FIXING BOLT 1.65

85 13GP9 SPOOL ASSEMBLY 84.15

86 10E8P FIXING BOLT 1.65

87 101MK BODY B SUBSTRATE SEAL 1.65

88 101M9 SUBSTRATE MOUNTING PLATE 2.75

89 13RNN BODY B SUBSTRATE ASSEMBLY 143.00

90 10B94 BEARING SEAL 1.65

91 10EX5 SPOOL SHAFT CONTACT B 1.10

92 13RUQ FRAME B RECEIVER 11.00

93 104N5 BODY B CAM LEVER ADJUSTMENT WASHER 1.65

94 13RNL BODY B CAM LEVER 1.10

95 108EZ BODY B BEARING ADJUSTMENT WASHER 1.10

96 13GHC MAGNET CAM ASSEMBLY 3.85

97 103LE FIXING BOLT 1.10

98 10GAA CAM LEVER ADJUSTMENT WASHER 1.10

99 13FZN BRAKE DIAL 3.85

100 101WM SOUND EMISSION SHILLING 1.65

101 13FN0 BODY B 7.15

102 13FTV BODY B ASSEMBLY 181.50

103 100SE WASHER 1.10

201 13TXB BODY A 16.50

202 10ST3 DRIVE GEAR 22.55

203 10SGC PINION GEAR 11.55

PUNT 13JRJ INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORIES) 2.20

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 21 Scorpion DC 21 150 Product code: 043061 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:36:16+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.85 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/5007

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "32 / ROLLER CLUTCH" , they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10R1Q FIXING BOLT 1.65

2 1017T RETAINER 3.85

3 10EBA HANDLE FIXING NUT 2.75

4 1027R HANDLE CAP 2.75

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 104FH WASHER 2.20

8 10DW6 HANDLE KNOB 11.55

9 10PXZ HANDLE KNOB BUSH 1.65

10 13HWE HANDLE SHAFT ASSEMBLY 22.55

11 13JDW HANDLE ASSEMBLY 67.65

12 10KXW STAR DRAG CLICK PLATE 1.65

13 10J26 STAR DRAG CLICK PLATE 1.65

14 10MFC CLICK PIN 1.65

15 10BT2 CLICK SPRING 1.65

16 13V49 STAR DRAG 16.50

17 10A70 STAR DRAG SPRING 2.75

18 10A3T STAR DRAG FIXING NUT 3.85

19 10J1N STAR DRAG SPACER 1.65

20 109F5 DRIVE GEAR WASHER 1.65

21 105PW STAR DRAG BEARING WASHER 1.10

22 10EX8 BALL BEARING (8 X 12 X 3.5) 13.75

23 13U1N MECHANICAL BRAKE KNOB 9.35

24 10896 MECHANICAL BRAKE WASHER 1.10

25 1085F MECHANICAL BRAKE WASHER 1.10

26 1054D BEARING PULL-OUT STOPPER 1.10

27 105C0 BALL BEARING (3 X 10 X 4) 13.75

28 10EYS BEARING SPACER 2.75

29 105BP BALL BEARING (5 X 9 X 3) 13.75

30 108WK O-RING SM14 1.65

31 13TXC BODY A 16.50

32 10F33 ROLLER CLUTCH *Cannot be ordered 22.55

33 10SRM ROLLER CLUTCH INNER TUBE 6.05

34 10D54 STAR DRAG PLATE 3.85

35 13UT5 STAR DRAG WASHER 3.85

36 10SGD DRIVE GEAR 22.55

37 1023U STAR DRAG WASHER 6.05

38 13USS STOPPER GEAR 6.05

39 10SG7 DRIVE GEAR SHAFT 11.55

40 10JDY SPRING FOR WORM SHAFT GEAR 1.65

41 10HJG WORM SHAFT GEAR PINS 1.65

42 101K8 WORM SHAFT GEAR 3.85

43 10GR3 WASHER (7 X 10) 1.10

44 10S3Y FIXING BOLT 1.10

45 109T1 DRIVE GEAR SHAFT FIXING PLATE 2.75

46 10DQF DRIVE GEAR SHAFT BUSH 1.65

47 10G6D WASHER 1.65

48 105NK E TYPE STOP RING 2.5 1.10

49 10SRL WORM SHAFT GEAR 3.85

50 10ST0 WORM SHAFT 2.75

51 10SSP LEVEL WINDING PIPE 1.65

52 101GT O-RING 1.65

53 10SGW PINION GEAR 11.55

54 104BC CLUTCH YOKE SPRING 1.10

55 1046V CLUTCH YOKE 1.65

56 10LVE FIXING BOLT 1.10

57 10F3X CLUTCH CAM PUSH PLATE 3.85

58 10190 WASHER 1.65

59 10SG1 CLUTCH CAM 2.75

60 101M5 CLUTCH CLAW 3.85

61 104CN CLUTCH CLAW SPRING 1.65

62 10SSV CLUTCH PLATE 4.95

63 10559 FIXING BOLT 1.65

64 10S57 FIXING BOLT 1.65

65 10SST BODY A SEAT 3.85

66 10MPD FIXING BOLT 1.10

67 13TDC CLUTCH LEVER RECEIVER (A) 1.10

68 13H6W CLUTCH LEVER ASSEMBLY 4.95

69 13TDD CLUTCH LEVER SEAT (B) 1.10

70 13SHT LEVEL WINDING GUARD 2.75

71 10FJB LEVEL WINDING RECEIVER 1.65

72 10CFU WASHER 1.10

73 10BHQ WORM SHAFT PIN 2.75

74 108WQ O-RING 1.65

75 101E0 LEVEL WINDING ASSEMBLY 11.55

76 13GBK FRAME ASSEMBLY 44.00

77 10LCQ FIXING BOLT 1.10

78 10FJZ WASHER 1.10

79 105NC E TYPE RETAINING RING 2 1.10

80 10QSE LEVEL WINDING GUIDE 1.65

81 10SXB FIXING BOLT 1.65

82 10LHY FIXING BOLT 1.65

83 108PY FRAME CONTACT WASHER 1.65

84 10SXA FIXING BOLT 1.65

85 13GP9 SPOOL ASSEMBLY 84.15

86 10E8P FIXING BOLT 1.65

87 101MK BODY B SUBSTRATE SEAL 1.65

88 101M9 SUBSTRATE MOUNTING PLATE 2.75

89 13RNN BODY B SUBSTRATE ASSEMBLY 143.00

90 10B94 BEARING SEAL 1.65

91 10EX5 SPOOL SHAFT CONTACT B 1.10

92 13RUQ FRAME B RECEIVER 11.00

93 104N5 BODY B CAM LEVER ADJUSTMENT WASHER 1.65

94 13RNL BODY B CAM LEVER 1.10

95 108EZ BODY B BEARING ADJUSTMENT WASHER 1.10

96 13GHC MAGNET CAM ASSEMBLY 3.85

97 103LE FIXING BOLT 1.10

98 10GAA CAM LEVER ADJUSTMENT WASHER 1.10

99 13FZN BRAKE DIAL 3.85

100 101WM SOUND EMISSION SHILLING 1.65

101 13FN0 BODY B 7.15

102 13FTV BODY B ASSEMBLY 181.50

103 100SE WASHER 1.10

PUNT 13JRJ INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORY) 2.20

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO Genuine] 21 SCORPION DC Spare Spool

HEDGEHOG STUDIO — 2026-08-18T14:34:13+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

Description

This is SHIMANO original spool equipped on 21 SCORPION DC series.
You may use as an extra spool with different line strength.

Spec

Line capacity Nylon （lb-m）
12-130, 14-110
16-100

Compatibility

21 SCORPION DC
(150, 151, 150HG, 151HG, 150XG, 151XG)

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 21 Scorpion MD 301XG LH Product code: 043603 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:32:42+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.96 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/5067

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "33 / ROLLER CLUTCH" , they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 13NXD FIXING BOLT 1.10

2 13VAD RETAINER 2.75

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 104FH WASHER 2.20

9 10PXZ HANDLE KNOB BUSHING 1.65

12 10QVN HANDLE RECEIVER WASHER 1.65

13 10QVP STAR DRAG SEAL 2.75

14 10KXW STAR DRAG CLICK PLATE 1.65

15 10J26 STAR DRAG CLICK PLATE 1.65

16 10MFC CLICK PIN 1.65

17 10BT2 CLICK SPRING 1.65

18 13V48 STAR DRAG 16.50

19 10A70 STAR DRAG SPRING 2.75

21 10J1N STAR DRAG SPACER 1.65

22 10255 ROLLER CLUTCH SEAL 9.35

24 13U29 MECHANICAL BRAKE KNOB 8.80

25 10896 MECHANICAL BRAKE WASHER 1.10

26 1085F MECHANICAL BRAKE WASHER 1.10

27 1057X EXTRACTION STOPPER 1.65

28 105BR BALL BEARING (5X9X3) 13.75

29 108WK O-RING SM14 1.65

31 101WJ FIXING BOLT 1.65

32 10LA3 FIXING BOLT 1.65

33 10F37 ROLLER CLUTCH BEARING *Cannot be ordered 17.05

34 10250 ROLLER CLUTCH INNER TUBE 6.05

35 1025E STAR DRAG PLATE 2.20

36 1024D STAR DRAG WASHER 8.80

37 1024F STAR DRAG WASHER 2.20

38 1025D STAR DRAG WASHERS 8.80

39 1024E STAR DRAG PLATE 2.20

41 1025A STAR DRAG WASHERS 6.05

42 10D73 STOPPER GEAR 6.05

44 10JDZ SPRING FOR WORM SHAFT GEAR 1.65

45 10HJG WORM SHAFT GEAR PINS 1.65

46 10J47 WORM SHAFT GEAR 2.75

47 10LCT FIXING BOLT 1.65

48 1024G DRIVE GEAR SHAFT FIXING PLATE 2.75

49 105BP BALL BEARING (5 X 9 X 3) 13.75

50 10G6D WASHER 1.65

51 105NK E-TYPE RETAINING RING 2.5 1.10

52 10LA8 O-RING 1.65

54 10LCZ FIXING BOLT 1.65

55 10FJB LEVEL WINDING RECEIVER 1.65

56 10CFU WORM SHAFT PIN 1.10

57 10BHQ WORM SHAFT PIN 2.75

58 108WQ O-RING 1.65

59 10R7V LEVEL WINDING ASSEMBLY 13.75

61 1024Q WORM SHAFT GEAR 2.75

62 1024R WORM SHAFT SEAL 3.85

63 13S6F WORM SHAFT 4.40

64 1024N LEVEL WINDING PIPE 1.65

65 101GT O-RING 1.65

67 104BC CLUTCH YOKE SPRING 1.10

69 10LVJ FIXING BOLT 1.10

70 10QVM CLUTCH CAM PUSH PLATE 3.85

75 10LCL FIXING BOLT 1.10

76 10SUT FIXING BOLT 1.65

78 105BT BALL BEARING (8 X 12 X 3.5) 13.75

79 10MW2 STOPPER CLAW ASSEMBLY 3.85

84 10EZE BB PUSH SPRING 1.65

85 10FJZ WASHER 1.10

86 105NC E TYPE STOPPER RING 2 1.10

87 1024P LEVEL-WIND GUIDE 1.65

88 1024L FRAME CENTER SEAL 2.75

89 10GQZ CLICK SPRING 1.10

91 101UL BODY B CAM LEVER PUSH PLATE 1.65

92 105CA BALL BEARING (5 X 11 X 4) 13.75

93 10MD1 SPOOL CLUTCH PIN 1.10

94 10ECR BRAKE COLLAR (CLEAR) (ACCESSORY) 1.65

95 10EZ7 O-RING 1.10

96 13GPA SPOOL ASSEMBLY (WITH BEARING) 78.65

97 1054D BEARING PULL-OUT STOPPER 1.10

98 105C2 BALL BEARING (3 X 10 X 4) 13.75

99 10EX5 SPOOL SHAFT ATTACHMENT B 1.10

100 10LA4 FIXING BOLT 1.10

102 13GGP WASHER 2.75

105 10GR7 WASHER 1.10

151 10NC0 REEL WRENCH (ACCESSORY) 1.65

152 10CPE BRAKE COLLAR (GRAY) 1.65

201 13XY5 HANDLE CAP 4.95

202 10LAA O-RING 1.10

203 10S9X WASHER 1.65

204 100RJ HANDLE KNOB 22.55

205 13J27 HANDLE SHAFT ASSEMBLY 22.55

206 13JE0 HANDLE ASSEMBLY 67.65

301 10R3C HANDLE FIXING NUT 2.75

302 10SRQ STAR DRAG FIXING NUT 2.75

303 13U74 BODY A NAMEPLATE 1.65

305 13UXX DRIVE GEAR 22.55

306 10228 DRIVE GEAR SHAFT 15.95

307 13SHR LEVEL WIND GUARD 2.20

309 13SPX PINION GEAR 11.55

310 1046Y CLUTCH YOKE 1.65

311 10225 CLUTCH CAM 2.75

312 1021U CLUTCH CLAW 9.35

313 1021T CLUTCH CLAW SPRING 1.65

314 1021Z CLUTCH PLATE 4.95

315 10227 BODY A SEAT 3.85

316 13GBE FRAME ASSEMBLY 39.60

317 1021Y CLUTCH LEVER SEAL 3.85

318 10220 CLUTCH LEVER RECEIVER (B) 1.65

319 1021W CLUTCH LEVER 6.05

320 1019C BODY B CAM LEVER 2.75

321 1027Z FRAME B RECEIVER ASSEMBLY 13.75

322 13RGU BODY B 5.50

323 13FTX BODY B ASSEMBLY 33.00

401 13TX7 BODY A 33.55

PUNT 13JRH INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORIES) 2.20

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 21 Scorpion MD 300XG LH Product code: 043597 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:31:52+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.96 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/5067

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "33 / ROLLER CLUTCH" , they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 13NXD FIXING BOLT 1.10

2 13VAD RETAINER 2.75

3 10FT1 HANDLE FIXING NUT 2.75

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 104FH WASHER 2.20

9 10PXZ HANDLE KNOB BUSHING 1.65

12 10QVN HANDLE RECEIVING WASHER 1.65

13 10QVP STAR DRAG SEAL 2.75

14 10KXW STAR DRAG CLICK PLATE 1.65

15 10J26 STAR DRAG CLICK PLATE 1.65

16 10MFC CLICK PIN 1.65

17 10BT2 CLICK SPRING 1.65

18 13V48 STAR DRAG 16.50

19 10A70 STAR DRAG SPRING 2.75

20 1024H STAR DRAG FIXING NUT 2.75

21 10J1N STAR DRAG SPACER 1.65

22 10255 ROLLER CLUTCH SEAL 9.35

23 13U73 BODY A NAMEPLATE 1.65

24 13U29 MECHANICAL BRAKE KNOB 8.80

25 10896 MECHANICAL BRAKE WASHER 1.10

26 1085F MECHANICAL BRAKE WASHER 1.10

27 1057X STOPPER FOR EXTRACTION 1.65

28 105BR BALL BEARING (5 X 9 X 3) 13.75

29 108WK O-RING SM14 1.65

31 101WJ FIXING BOLT 1.65

32 10LA3 FIXING BOLT 1.65

33 10F37 ROLLER CLUTCH BEARING *Cannot be ordered 17.05

34 10250 ROLLER CLUTCH INNER TUBE 6.05

35 1025E STAR DRAG PLATE 2.20

36 1024D STAR DRAG WASHER 8.80

37 1024F STAR DRAG WASHER 2.20

38 1025D STAR DRAG WASHERS 8.80

39 1024E STAR DRAG PLATE 2.20

40 13UXY DRIVE GEAR 22.55

41 1025A STAR DRAG WASHERS 6.05

42 10D73 STOPPER GEAR 6.05

43 10257 DRIVE GEAR SHAFT 14.85

44 10JDZ SPRING FOR WORM SHAFT GEAR 1.65

45 10HJG WORM SHAFT GEAR PINS 1.65

46 10J47 WORM SHAFT GEAR 2.75

47 10LCT FIXING BOLT 1.65

48 1024G DRIVE GEAR SHAFT FIXING PLATE 2.75

49 105BP BALL BEARING (5 X 9 X 3) 13.75

50 10G6D WASHER 1.65

51 105NK E-TYPE RETAINING RING 2.5 1.10

52 10LA8 O-RING 1.65

53 13SHS LEVEL WIND GUARD 2.20

54 10LCZ FIXING BOLT 1.65

55 10FJB LEVEL WINDING RECEIVER 1.65

56 10CFU WASHER 1.10

57 10BHQ WORM SHAFT PIN 2.75

58 108WQ O-RING 1.65

59 10R7V LEVEL WINDING ASSEMBLY 13.75

61 1024Q WORM SHAFT GEAR 2.75

62 1024R WORM SHAFT SEAL 3.85

63 13S6F WORM SHAFT 4.40

64 1024N LEVEL WINDING PIPE 1.65

65 101GT O-RING 1.65

66 13SPY PINION GEAR 11.55

67 104BC CLUTCH YOKE SPRING 1.10

68 1046X CLUTCH YOKE 1.65

69 10LVJ FIXING BOLT 1.10

70 10QVM CLUTCH CAM PUSH PLATE 3.85

71 10254 CLUTCH CAM 2.75

72 101J2 CLUTCH CLAW 9.35

73 101J3 CLUTCH CLAW SPRING 1.65

74 101J9 CLUTCH PLATE 4.95

75 10LCL FIXING BOLT 1.10

76 10SUT FIXING BOLT 1.65

77 10251 MAIN UNIT A SEAT 3.85

78 105BT BALL BEARING (8 X 12 X 3.5) 13.75

79 10MW2 STOPPER CLAW ASSEMBLY 3.85

80 13GBD FRAME ASSEMBLY 39.60

81 101J8 CLUTCH LEVER SEAL 3.85

82 101JA CLUTCH LEVER RECEIVER (B) 1.65

83 101J4 CLUTCH LEVER 6.05

84 10EZE BB PUSH SPRING 1.65

85 10FJZ WASHER 1.10

86 105NC E TYPE STOP RING 2 1.10

87 1024P LEVEL-WIND GUIDE 1.65

88 1024L FRAME CENTER SEAL 2.75

89 10GQZ CLICK SPRING 1.10

90 1019B BODY B CAM LEVER 2.75

91 101UL BODY B CAM LEVER PUSH PLATE 1.65

92 105CA BALL BEARING (5 X 11 X 4) 13.75

93 10MD1 SPOOL CLUTCH PIN 1.10

94 10ECR BRAKE COLLAR (CLEAR) (ACCESSORY) 1.65

95 10EZ7 O RING 1.10

96 13GPA SPOOL ASSEMBLY (WITH BEARING) 78.65

97 1054D BEARING PULL-OUT STOPPER 1.10

98 105C2 BALL BEARING (3 X 10 X 4) 13.75

99 10EX5 SPOOL SHAFT ATTACHMENT B 1.10

100 10LA4 FIXING BOLT 1.10

101 10SWA FRAME B BEARING ASSEMBLY 13.75

102 13GGP WASHER 2.75

103 13RGV BODY B 5.50

104 13FTQ BODY B ASSEMBLY 33.00

105 10GR7 WASHER 1.10

151 10NC0 REEL WRENCH (ACCESSORY) 1.65

152 10CPE BRAKE COLLAR (GRAY) 1.65

201 13XY5 HANDLE CAP 4.95

202 10LAA O-RING 1.10

203 10S9X WASHER 1.65

204 100RJ HANDLE KNOB 22.55

205 13J27 HANDLE SHAFT ASSEMBLY 22.55

206 13JE0 HANDLE ASSEMBLY 67.65

207 13TX9 MAIN UNIT A 33.55

PUNT 13JRH INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORIES) 2.20

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 21 Scorpion MD 301XG Product code: 043580 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:30:59+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.96 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/5067

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "33 / ROLLER CLUTCH" , they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 13NXD FIXING BOLT 1.10

2 13VAD RETAINER 2.75

4 13MBM HANDLE CAP 4.40

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 104FH WASHER 2.20

8 10326 HANDLE KNOB 11.55

9 10PXZ HANDLE KNOB BUSH 1.65

10 13J26 HANDLE SHAFT ASSEMBLY 22.55

11 13JDZ HANDLE ASSEMBLY 67.65

12 10QVN HANDLE RECEIVING WASHER 1.65

13 10QVP STAR DRAG SEAL 2.75

14 10KXW STAR DRAG CLICK PLATE 1.65

15 10J26 STAR DRAG CLICK PLATE 1.65

16 10MFC CLICK PIN 1.65

17 10BT2 CLICK SPRING 1.65

18 13V48 STAR DRAG 16.50

19 10A70 STAR DRAG SPRING 2.75

21 10J1N STAR DRAG SPACER 1.65

22 10255 ROLLER CLUTCH SEAL 9.35

24 13U29 MECHANICAL BRAKE KNOB 8.80

25 10896 MECHANICAL BRAKE WASHER 1.10

26 1085F MECHANICAL BRAKE WASHER 1.10

27 1057X EXTRACTION STOPPER 1.65

28 105BR BALL BEARING (5X9X3) 13.75

29 108WK O-RING SM14 1.65

31 101WJ FIXING BOLT 1.65

32 10LA3 FIXING BOLT 1.65

33 10F37 ROLLER CLUTCH BEARING *Cannot be ordered 17.05

34 10250 ROLLER CLUTCH INNER TUBE 6.05

35 1025E STAR DRAG PLATE 2.20

36 1024D STAR DRAG WASHER 8.80

37 1024F STAR DRAG WASHER 2.20

38 1025D STAR DRAG WASHERS 8.80

39 1024E STAR DRAG PLATE 2.20

41 1025A STAR DRAG WASHERS 6.05

42 10D73 STOPPER GEAR 6.05

44 10JDZ SPRING FOR WORM SHAFT GEAR 1.65

45 10HJG WORM SHAFT GEAR PINS 1.65

46 10J47 WORM SHAFT GEAR 2.75

47 10LCT FIXING BOLT 1.65

48 1024G DRIVE GEAR SHAFT FIXING PLATE 2.75

49 105BP BALL BEARING (5 X 9 X 3) 13.75

50 10G6D WASHER 1.65

51 105NK E-TYPE RETAINING RING 2.5 1.10

52 10LA8 O-RING 1.65

54 10LCZ FIXING BOLT 1.65

55 10FJB LEVEL WINDING RECEIVER 1.65

56 10CFU WORM SHAFT PIN 1.10

57 10BHQ WORM SHAFT PIN 2.75

58 108WQ O-RING 1.65

59 10R7V LEVEL WINDING ASSEMBLY 13.75

61 1024Q WORM SHAFT GEAR 2.75

62 1024R WORM SHAFT SEAL 3.85

63 13S6F WORM SHAFT 4.40

64 1024N LEVEL WINDING PIPE 1.65

65 101GT O-RING 1.65

67 104BC CLUTCH YOKE SPRING 1.10

69 10LVJ FIXING BOLT 1.10

70 10QVM CLUTCH CAM PUSH PLATE 3.85

75 10LCL FIXING BOLT 1.10

76 10SUT FIXING BOLT 1.65

78 105BT BALL BEARING (8 X 12 X 3.5) 13.75

79 10MW2 STOPPER CLAW ASSEMBLY 3.85

84 10EZE BB PUSH SPRING 1.65

85 10FJZ WASHER 1.10

86 105NC E TYPE STOPPER RING 2 1.10

87 1024P LEVEL-WIND GUIDE 1.65

88 1024L FRAME CENTER SEAL 2.75

89 10GQZ CLICK SPRING 1.10

91 101UL BODY B CAM LEVER PUSH PLATE 1.65

92 105CA BALL BEARING (5 X 11 X 4) 13.75

93 10MD1 SPOOL CLUTCH PIN 1.10

94 10ECR BRAKE COLLAR (CLEAR) (ACCESSORY) 1.65

95 10EZ7 O-RING 1.10

96 13GPA SPOOL ASSEMBLY (WITH BEARING) 78.65

97 1054D BEARING PULL-OUT STOPPER 1.10

98 105C2 BALL BEARING (3 X 10 X 4) 13.75

99 10EX5 SPOOL SHAFT ATTACHMENT B 1.10

100 10LA4 FIXING BOLT 1.10

102 13GGP WASHER 2.75

105 10GR7 WASHER 1.10

152 10CPE BRAKE COLLAR (GRAY) 1.65

301 10R3C HANDLE FIXING NUT 2.75

302 10SRQ STAR DRAG FIXING NUT 2.75

303 13U74 BODY A NAMEPLATE 1.65

304 13TX6 BODY A 33.55

305 13UXX DRIVE GEAR 22.55

306 10228 DRIVE GEAR SHAFT 15.95

307 13SHR LEVEL WIND GUARD 2.20

309 13SPX PINION GEAR 11.55

310 1046Y CLUTCH YOKE 1.65

311 10225 CLUTCH CAM 2.75

312 1021U CLUTCH CLAW 9.35

313 1021T CLUTCH CLAW SPRING 1.65

314 1021Z CLUTCH PLATE 4.95

315 10227 BODY A SEAT 3.85

316 13GBE FRAME ASSEMBLY 39.60

317 1021Y CLUTCH LEVER SEAL 3.85

318 10220 CLUTCH LEVER RECEIVER (B) 1.65

319 1021W CLUTCH LEVER 6.05

320 1019C BODY B CAM LEVER 2.75

321 1027Z FRAME B RECEIVER ASSEMBLY 13.75

322 13RGU BODY B 5.50

323 13FTX BODY B ASSEMBLY 33.00

PUNT 13JRH INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORY) 2.20

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 21 Scorpion MD 300XG Product code: 043573 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:30:07+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

- Genuine Spool Purchase

* If you just want the genuine spool (No.96 / Spool Unit), you can purchase it from the following link without waiting for weeks if it's in our stock now.
https://www.hedgehog-studio.co.jp/product/5067

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "33 / ROLLER CLUTCH" , they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 13NXD FIXING BOLT 1.10

2 13VAD RETAINER 2.75

3 10FT1 HANDLE FIXING NUT 2.75

4 13MBM HANDLE CAP 4.40

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 104FH WASHER 2.20

8 10326 HANDLE KNOB 11.55

9 10PXZ HANDLE KNOB BUSH 1.65

10 13J26 HANDLE SHAFT ASSEMBLY 22.55

11 13JDZ HANDLE ASSEMBLY 67.65

12 10QVN HANDLE RECEIVING WASHER 1.65

13 10QVP STAR DRAG SEAL 2.75

14 10KXW STAR DRAG CLICK PLATE 1.65

15 10J26 STAR DRAG CLICK PLATE 1.65

16 10MFC CLICK PIN 1.65

17 10BT2 CLICK SPRING 1.65

18 13V48 STAR DRAG 16.50

19 10A70 STAR DRAG SPRING 2.75

20 1024H STAR DRAG FIXING NUT 2.75

21 10J1N STAR DRAG SPACER 1.65

22 10255 ROLLER CLUTCH SEAL 9.35

23 13U73 BODY A NAMEPLATE 1.65

24 13U29 MECHANICAL BRAKE KNOB 8.80

25 10896 MECHANICAL BRAKE WASHER 1.10

26 1085F MECHANICAL BRAKE WASHER 1.10

27 1057X STOPPER FOR EXTRACTION 1.65

28 105BR BALL BEARING (5 X 9 X 3) 13.75

29 108WK O-RING SM14 1.65

30 13TX8 BODY A 33.55

31 101WJ FIXING BOLT 1.65

32 10LA3 FIXING BOLT 1.65

33 10F37 ROLLER CLUTCH BEARING *Cannot be ordered 17.05

34 10250 ROLLER CLUTCH INNER TUBE 6.05

35 1025E STAR DRAG PLATE 2.20

36 1024D STAR DRAG WASHER 8.80

37 1024F STAR DRAG WASHER 2.20

38 1025D STAR DRAG WASHERS 8.80

39 1024E STAR DRAG PLATE 2.20

40 13UXY DRIVE GEAR 22.55

41 1025A STAR DRAG WASHERS 6.05

42 10D73 STOPPER GEAR 6.05

43 10257 DRIVE GEAR SHAFT 14.85

44 10JDZ SPRING FOR WORM SHAFT GEAR 1.65

45 10HJG WORM SHAFT GEAR PINS 1.65

46 10J47 WORM SHAFT GEAR 2.75

47 10LCT FIXING BOLT 1.65

48 1024G DRIVE GEAR SHAFT FIXING PLATE 2.75

49 105BP BALL BEARING (5 X 9 X 3) 13.75

50 10G6D WASHER 1.65

51 105NK E-TYPE RETAINING RING 2.5 1.10

52 10LA8 O-RING 1.65

53 13SHS LEVEL WIND GUARD 2.20

54 10LCZ FIXING BOLT 1.65

55 10FJB LEVEL WINDING RECEIVER 1.65

56 10CFU WASHER 1.10

57 10BHQ WORM SHAFT PIN 2.75

58 108WQ O-RING 1.65

59 10R7V LEVEL WINDING ASSEMBLY 13.75

61 1024Q WORM SHAFT GEAR 2.75

62 1024R WORM SHAFT SEAL 3.85

63 13S6F WORM SHAFT 4.40

64 1024N LEVEL WINDING PIPE 1.65

65 101GT O-RING 1.65

66 13SPY PINION GEAR 11.55

67 104BC CLUTCH YOKE SPRING 1.10

68 1046X CLUTCH YOKE 1.65

69 10LVJ FIXING BOLT 1.10

70 10QVM CLUTCH CAM PUSH PLATE 3.85

71 10254 CLUTCH CAM 2.75

72 101J2 CLUTCH CLAW 9.35

73 101J3 CLUTCH CLAW SPRING 1.65

74 101J9 CLUTCH PLATE 4.95

75 10LCL FIXING BOLT 1.10

76 10SUT FIXING BOLT 1.65

77 10251 MAIN UNIT A SEAT 3.85

78 105BT BALL BEARING (8 X 12 X 3.5) 13.75

79 10MW2 STOPPER CLAW ASSEMBLY 3.85

80 13GBD FRAME ASSEMBLY 39.60

81 101J8 CLUTCH LEVER SEAL 3.85

82 101JA CLUTCH LEVER RECEIVER (B) 1.65

83 101J4 CLUTCH LEVER 6.05

84 10EZE BB PUSH SPRING 1.65

85 10FJZ WASHER 1.10

86 105NC E TYPE STOP RING 2 1.10

87 1024P LEVEL-WIND GUIDE 1.65

88 1024L FRAME CENTER SEAL 2.75

89 10GQZ CLICK SPRING 1.10

90 1019B BODY B CAM LEVER 2.75

91 101UL BODY B CAM LEVER PUSH PLATE 1.65

92 105CA BALL BEARING (5 X 11 X 4) 13.75

93 10MD1 SPOOL CLUTCH PIN 1.10

94 10ECR BRAKE COLLAR (CLEAR) (ACCESSORY) 1.65

95 10EZ7 O RING 1.10

96 13GPA SPOOL ASSEMBLY (WITH BEARING) 78.65

97 1054D BEARING PULL-OUT STOPPER 1.10

98 105C2 BALL BEARING (3 X 10 X 4) 13.75

99 10EX5 SPOOL SHAFT ATTACHMENT B 1.10

100 10LA4 FIXING BOLT 1.10

101 10SWA FRAME B BEARING ASSEMBLY 13.75

102 13GGP WASHER 2.75

103 13RGV BODY B 5.50

104 13FTQ BODY B ASSEMBLY 33.00

105 10GR7 WASHER 1.10

152 10CPE BRAKE COLLAR (GRAY) 1.65

PUNT 13JRH INSTRUCTION MANUAL EXPLODED VIEW SET (ACCESSORY) 2.20

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 24 Scorpion MD 300 301XGLH LEFT Product code: 047175 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:28:49+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship this item after you order unless we have in stock at the time of your order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "34 / ROLLER CLUTCH" ,"BRKS / BRAKE SHOE M","BST1/ BRAKE SHAFT"and "94 / SPOOL CLUTCH PIN", they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 13NXD FIXING BOLT 1.10

2 13VAD RETAINER 2.75

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 10GDA WASHER 1.65

9 10PXZ HANDLE KNOB BUSHING 1.65

12 10QVN HANDLE GUIDE WASHER 1.65

13 10QVP STAR DRAG SEAL 2.75

14 10KXW STAR DRAG CLICK PLATE RETAINER 1.65

15 10J26 STAR DRAG CLICK PLATE 1.65

16 10MFC CLICK PIN 1.65

17 10BT2 STAR DRAG CLICK PIN 1.65

18 146AQ STAR DRAG 23.10

19 10A70 STAR DRAG SPRING 2.75

21 10J1P STAR DRAG SPACER 2.75

22 109F5 DRIVE GEAR WASHER 1.65

24 145RX BODY A NAMEPLATE 1.65

25 146HS MECHANICAL BRAKE KNOB 16.50

26 10896 MECHANICAL BRAKE WASHER 1.10

27 148DJ MECHANICAL BRAKE WASHER 1.65

28 148DK BEARING STOPPER 1.10

29 105BR BALL BEARING (5 X 9 X 3) 13.75

30 108WK O-RING SM14 1.65

31 10TLW FIXING BOLT 1.10

32 10L6E FIXING BOLT 1.65

34 10F37 ROLLER CLUTCH BEARING *Cannot be ordered 17.05

35 13NWK FIXING BOLT 1.10

37 145RZ ROLLER CLUTCH INNER TUBE 12.65

38 145SX STAR DRAG PLATE 2.75

39 145S8 STAR DRAG WASHER 12.10

40 145SH STAR DRAG WASHER 1.65

41 1024D STAR DRAG WASHER 8.80

42 145SW STAR DRAG PLATE 1.65

44 1025A STAR DRAG WASHER 6.05

45 145SG STOPPER GEAR 2.75

47 10JDZ SPRING FOR WORM SHAFT GEAR 1.65

48 10HJG WORM SHAFT GEAR PINS 1.65

49 10J47 WORM SHAFT GEAR 2.75

50 10GR7 WASHER 1.10

51 10S3Y FIXING BOLT 1.10

52 145S6 DRIVE GEAR SHAFT FIXING PLATE 1.65

53 105BP BALL BEARING (5 X 9 X 3) 13.75

54 10G6D WORM SHAFT GEAR 1.65

55 105NK E-TYPE RETAINING RING 2.5 1.10

56 10LA8 O-RING 1.65

57 10FJB LEVEL WINDING RECEIVING PLATE 1.65

58 10CFU WASHER 1.10

59 10BHQ WORM SHAFT PIN 2.75

60 108WQ O-RING 1.65

61 10SWD LEVEL WINDING ASSEMBLY 13.75

62 1024Q WORM SHAFT GEAR 2.75

63 10C47 MAIN GEAR SHAFT WASHER 1.10

64 1024R WORM SHAFT SEAL 3.85

65 146AP WORM SHAFT 1.65

66 145SF LEVEL WINDING PIPE 1.65

67 105NC E TYPE STOP RING 2 1.10

68 101GT O-RING 1.65

70 104BC CLUTCH YOKE SPRING 1.10

72 10LVJ FIXING BOLT 1.10

73 10QVM CLUTCH CAM PUSH PLATE 3.85

78 10LCL FIXING BOLT 1.10

79 10MPD FIXING BOLT 1.10

80 14694 LEVEL-WIND GUIDE FIXING PLATE 1.10

81 145S1 LEVEL-WIND GUIDE 1.65

82 105BT BALL BEARING (8 X 12 X 3.5) 13.75

83 10SUT FIXING BOLT 1.65

88 101WJ FIXING BOLT 1.65

89 10MW2 STOPPER CLAW ASSEMBLY 3.85

91 10EZE BB PUSH SPRING 1.65

92 1024L FRAME CENTER SEAL 2.75

93 105CA BALL BEARING (5 X 11 X 4) 13.75

94 10MD1 SPOOL CLUTCH PIN *Cannot be ordered 1.10

95 10EZ7 O-RING 1.10

96 146JQ SPOOL ASSEMBLY 82.50

97 1054D BEARING PULL-OUT STOPPER 1.10

98 105C2 BALL BEARING (3 X 10 X 4) 13.75

99 10EX5 SPOOL SHAFT CONTACT B 1.10

100 10E7R FIXING BOLT 1.10

101 145S0 CAM LEVER RETAINING RING 1.65

102 145SJ BRAKE DIAL FIXING PLATE 3.30

103 148DF BRAKE PIPE GEAR ASSEMBLY 22.00

104 146GJ O-RING 1.65

105 10MLU O-RING 3.85

106 146HL WASHER 1.10

109 145SP O-RING 2.20

110 146HN WASHER 2.20

111 146HP WASHER 1.10

151 10NC0 REEL WRENCH 1.65

201 13XY5 HANDLE CAP 4.95

202 10LAA O-RING 1.10

203 10S9X WASHER 1.65

204 100RJ HANDLE KNOB 22.55

205 148DB HANDLE SHAFT ASSEMBLY 22.55

206 146JR HANDLE ASSEMBLY 68.20

301 10R3C HANDLE FIXING NUT 2.75

304 10R3H STAR DRAG FIXING NUT 6.05

306 14CY6 DRIVE GEAR 33.00

307 146J9 DRIVE GEAR SHAFT 15.95

309 14CY7 PINION GEAR 14.30

310 1046Y CLUTCH YOKE 1.65

311 10225 CLUTCH CAM 2.75

312 1021U CLUTCH CLAW 9.35

313 1021T CLUTCH CLAW SPRING 1.65

314 1021Z CLUTCH PLATE 4.95

315 10227 BODY A SEAT 3.85

316 1021Y CLUTCH LEVER SEAL 3.85

317 146J8 CLUTCH LEVER GUIDE (B) 1.65

318 1021W CLUTCH LEVER 6.05

319 148DQ FRAME ASSEMBLY 110.00

320 147BQ BRAKE DIAL 3.30

321 148DR FRAME B GUIDE ASSEMBLY 36.30

322 146J5 BODY B CAM LEVER 10.45

323 148DS BODY B ASSEMBLY 49.50

401 148DT BODY A SET 60.50

BRKS 1019F BRAKE SHOE M *Cannot be ordered 1.10

BST1 13SFU BRAKE SHAFT *Cannot be ordered 1.10

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 24 Scorpion MD 300 300XGLH RIGHT Product code: 047168 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:27:58+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship this item after you order unless we have in stock at the time of your order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "34 / ROLLER CLUTCH" ,"BRKS / BRAKE SHOE M","BST1/ BRAKE SHAFT"and "94 / SPOOL CLUTCH PIN", they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 13NXD FIXING BOLT 1.10

2 13VAD RETAINER 2.75

3 10FT1 HANDLE FIXING NUT 2.75

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 10GDA WASHER 1.65

9 10PXZ HANDLE KNOB BUSHING 1.65

12 10QVN HANDLE RECEIVING WASHER 1.65

13 10QVP STAR DRAG SEAL 2.75

14 10KXW STAR DRAG CLICK PLATE RETAINER 1.65

15 10J26 STAR DRAG CLICK PLATE 1.65

16 10MFC CLICK PIN 1.65

17 10BT2 STAR DRAG CLICK PIN 1.65

18 146AQ STAR DRAG 23.10

19 10A70 STAR DRAG SPRING 2.75

20 10A3X STAR DRAG FIXING NUT 6.05

21 10J1P STAR DRAG SPACER 2.75

22 109F5 DRIVE GEAR WASHER 1.65

24 145RX BODY A NAMEPLATE 1.65

25 146HS MECHANICAL BRAKE KNOB 16.50

26 10896 MECHANICAL BRAKE WASHER 1.10

27 148DJ MECHANICAL BRAKE WASHER 1.65

28 148DK BEARING STOPPER 1.10

29 105BR BALL BEARING (5 X 9 X 3) 13.75

30 108WK O-RING SM14 1.65

31 10TLW FIXING BOLT 1.10

32 10L6E FIXING BOLT 1.65

34 10F37 ROLLER CLUTCH BEARING *Cannot be ordered 17.05

35 13NWK FIXING BOLT 1.10

37 145RZ ROLLER CLUTCH INNER TUBE 12.65

38 145SX STAR DRAG PLATE 2.75

39 145S8 STAR DRAG WASHER 12.10

40 145SH STAR DRAG WASHER 1.65

41 1024D STAR DRAG WASHER 8.80

42 145SW STAR DRAG PLATE 1.65

43 14CY5 DRIVE GEAR 33.00

44 1025A STAR DRAG WASHER 6.05

45 145SG STOPPER GEAR 2.75

46 145S5 DRIVE GEAR SHAFT 15.95

47 10JDZ SPRING FOR WORM SHAFT GEAR 1.65

48 10HJG WORM SHAFT GEAR PINS 1.65

49 10J47 WORM SHAFT GEAR 2.75

50 10GR7 WASHER 1.10

51 10S3Y FIXING BOLT 1.10

52 145S6 DRIVE GEAR SHAFT FIXING PLATE 1.65

53 105BP BALL BEARING (5 X 9 X 3) 13.75

54 10G6D WORM SHAFT GEAR 1.65

55 105NK E-TYPE RETAINING RING 2.5 1.10

56 10LA8 O-RING 1.65

57 10FJB LEVEL WINDING RECEIVING PLATE 1.65

58 10CFU WASHER 1.10

59 10BHQ WORM SHAFT PIN 2.75

60 108WQ O-RING 1.65

61 10SWD LEVEL WINDING ASSEMBLY 13.75

62 1024Q WORM SHAFT GEAR 2.75

63 10C47 MAIN GEAR SHAFT WASHER 1.10

64 1024R WORM SHAFT SEAL 3.85

65 146AP WORM SHAFT 1.65

66 145SF LEVEL WINDING PIPE 1.65

67 105NC E TYPE STOP RING 2 1.10

68 101GT O-RING 1.65

69 14CY5 PINION GEAR 14.30

70 104BC CLUTCH YOKE SPRING 1.10

71 1046X CLUTCH YOKE 1.65

72 10LVJ FIXING BOLT 1.10

73 10QVM CLUTCH CAM PUSH PLATE 3.85

74 10254 CLUTCH CAM 2.75

75 101J2 CLUTCH CLAW 9.35

76 101J3 CLUTCH CLAW SPRING 1.65

77 101J9 CLUTCH PLATE 4.95

78 10LCL FIXING BOLT 1.10

79 10MPD FIXING BOLT 1.10

80 14694 LEVEL-WIND GUIDE FIXING PLATE 1.10

81 145S1 LEVEL-WIND GUIDE 1.65

82 105BT BALL BEARING (8 X 12 X 3.5) 13.75

83 10SUT FIXING BOLT 1.65

84 10251 BODY A SEAT 3.85

85 101J8 CLUTCH LEVER SEAL 3.85

86 145SQ CLUTCH LEVER GUIDE (B) 1.65

87 101J4 CLUTCH LEVER 6.05

88 101WJ FIXING BOLT 1.65

89 10MW2 STOPPER CLAW ASSEMBLY 3.85

90 148DE FRAME ASSEMBLY 110.00

91 10EZE BB PUSH SPRING 1.65

92 1024L FRAME CENTER SEAL 2.75

93 105CA BALL BEARING (5 X 11 X 4) 13.75

94 10MD1 SPOOL CLUTCH PIN *Cannot be ordered 1.10

95 10EZ7 O-RING 1.10

96 146JQ SPOOL ASSEMBLY 82.50

97 1054D BEARING PULL-OUT STOPPER 1.10

98 105C2 BALL BEARING (3 X 10 X 4) 13.75

99 10EX5 SPOOL SHAFT CONTACT B 1.10

100 10E7R FIXING BOLT 1.10

101 145S0 CAM LEVER RETAINING RING 1.65

102 145SJ BRAKE DIAL FIXING PLATE 3.30

103 148DF BRAKE PIPE GEAR ASSEMBLY 22.00

104 146GJ O-RING 1.65

105 10MLU O-RING 3.85

106 146HL WASHER 1.10

107 145SU BRAKE DIAL 3.30

108 148DG FRAME B GUIDE ASSEMBLY 36.30

109 145SP O-RING 2.20

110 146HN O-RING WASHER 2.20

111 146HP SEATING RING 1.10

112 145RW BODY B CAM LEVER 10.45

113 148DH BODY B ASSEMBLY 49.50

151 10NC0 REEL WRENCH 1.65

201 13XY5 HANDLE CAP 4.95

202 10LAA O-RING 1.10

203 10S9X WASHER 1.65

204 100RJ HANDLE KNOB 22.55

205 148DB HANDLE SHAFT ASSEMBLY 22.55

206 146JR HANDLE ASSEMBLY 68.20

207 148DA BODY A ASSEMBLY 60.50

BRKS 1019F BRAKE SHOE M *Cannot be ordered 1.10

BST1 13SFU BRAKE SHAFT *Cannot be ordered 1.10

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 24 Scorpion MD 300 301XG LEFT Product code: 047151 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:27:01+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship this item after you order unless we have in stock at the time of your order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "34 / ROLLER CLUTCH" ,"BRKS / BRAKE SHOE M","BST1/ BRAKE SHAFT"and "94 / SPOOL CLUTCH PIN", they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 13NXD FIXING BOLT 1.10

2 13VAD RETAINER 2.75

4 10SS2 HANDLE CAP 1.10

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 10GDA WASHER 1.65

9 10PXZ HANDLE KNOB BUSHING 1.65

10 148DC HANDLE SHAFT ASSEMBLY 22.55

12 10QVN HANDLE GUIDE WASHER 1.65

13 10QVP STAR DRAG SEAL 2.75

14 10KXW STAR DRAG CLICK PLATE RETAINER 1.65

15 10J26 STAR DRAG CLICK RETAINER 1.65

16 10MFC CLICK PIN 1.65

17 10BT2 STAR DRAG CLICK PIN 1.65

18 146AQ STAR DRAG 23.10

19 10A70 STAR DRAG SPRING 2.75

21 10J1P STAR DRAG SPACER 2.75

22 109F5 DRIVE GEAR WASHER 1.65

24 145RX BODY A NAMEPLATE 1.65

25 146HS MECHANICAL BRAKE KNOB 16.50

26 10896 MECHANICAL BRAKE WASHER 1.10

27 148DJ MECHANICAL BRAKE WASHER 1.65

28 148DK BEARING STOPPER 1.10

29 105BR BALL BEARING (5 X 9 X 3) 13.75

30 108WK O-RING SM14 1.65

31 10TLW FIXING BOLT 1.10

32 10L6E FIXING BOLT 1.65

34 10F37 ROLLER CLUTCH BEARING *Cannot be ordered 17.05

35 13NWK FIXING BOLT 1.10

37 145RZ ROLLER CLUTCH INNER TUBE 12.65

38 145SX STAR DRAG PLATE 2.75

39 145S8 STAR DRAG WASHER 12.10

40 145SH STAR DRAG WASHER 1.65

41 1024D STAR DRAG WASHER 8.80

42 145SW STAR DRAG PLATE 1.65

44 1025A STAR DRAG WASHER 6.05

45 145SG STOPPER GEAR 2.75

47 10JDZ SPRING FOR WORM SHAFT GEAR 1.65

48 10HJG WORM SHAFT GEAR PINS 1.65

49 10J47 WORM SHAFT GEAR 2.75

50 10GR7 WASHER 1.10

51 10S3Y FIXING BOLT 1.10

52 145S6 DRIVE GEAR SHAFT FIXING PLATE 1.65

53 105BP BALL BEARING (5 X 9 X 3) 13.75

54 10G6D WORM SHAFT GEAR 1.65

55 105NK E-TYPE RETAINING RING 2.5 1.10

56 10LA8 O-RING 1.65

57 10FJB LEVEL WINDING RECEIVING PLATE 1.65

58 10CFU WASHER 1.10

59 10BHQ WORM SHAFT PIN 2.75

60 108WQ O-RING 1.65

61 10SWD LEVEL WINDING ASSEMBLY 13.75

62 1024Q WORM SHAFT GEAR 2.75

63 10C47 MAIN GEAR SHAFT WASHER 1.10

64 1024R WORM SHAFT SEAL 3.85

65 146AP WORM SHAFT 1.65

66 145SF LEVEL WINDING PIPE 1.65

67 105NC E TYPE STOP RING 2 1.10

68 101GT O-RING 1.65

70 104BC CLUTCH YOKE SPRING 1.10

72 10LVJ FIXING BOLT 1.10

73 10QVM CLUTCH CAM PUSH PLATE 3.85

78 10LCL FIXING BOLT 1.10

79 10MPD FIXING BOLT 1.10

80 14694 LEVEL-WIND GUIDE FIXING PLATE 1.10

81 145S1 LEVEL-WIND GUIDE 1.65

82 105BT BALL BEARING (8 X 12 X 3.5) 13.75

83 10SUT FIXING BOLT 1.65

88 101WJ FIXING BOLT 1.65

89 10MW2 STOPPER CLAW ASSEMBLY 3.85

91 10EZE BB PUSH SPRING 1.65

92 1024L FRAME CENTER SEAL 2.75

93 105CA BALL BEARING (5 X 11 X 4) 13.75

94 10MD1 SPOOL CLUTCH PIN *Cannot be ordered 1.10

95 10EZ7 O-RING 1.10

96 146JQ SPOOL ASSEMBLY 82.50

97 1054D BEARING PULL-OUT STOPPER 1.10

98 105C2 BALL BEARING (3 X 10 X 4) 13.75

99 10EX5 SPOOL SHAFT CONTACT B 1.10

100 10E7R FIXING BOLT 1.10

101 145S0 CAM LEVER RETAINING RING 1.65

102 145SJ BRAKE DIAL FIXING PLATE 3.30

103 148DF BRAKE PIPE GEAR ASSEMBLY 22.00

104 146GJ O-RING 1.65

105 10MLU O-RING 3.85

106 146HL WASHER 1.10

109 145SP O-RING 2.20

110 146HN WASHER 2.20

111 146HP WASHER 1.10

301 10R3C HANDLE FIXING NUT 2.75

302 10EBH HANDLE KNOB 11.55

303 146JC HANDLE ASSEMBLY 68.20

304 10R3H STAR DRAG FIXING NUT 6.05

305 148DP BODY A ASSEMBLY 60.50

306 146JA DRIVE GEAR 33.00

307 146J9 DRIVE GEAR SHAFT 15.95

309 146JB PINION GEAR 14.30

310 1046Y CLUTCH YOKE 1.65

311 10225 CLUTCH CAM 2.75

312 1021U CLUTCH CLAW 9.35

313 1021T CLUTCH CLAW SPRING 1.65

314 1021Z CLUTCH PLATE 4.95

315 10227 BODY A SEAT 3.85

316 1021Y CLUTCH LEVER SEAL 3.85

317 146J8 CLUTCH LEVER GUIDE (B) 1.65

318 1021W CLUTCH LEVER 6.05

319 148DQ FRAME ASSEMBLY 110.00

320 147BQ BRAKE DIAL 3.30

321 148DR FRAME B GUIDE ASSEMBLY 36.30

322 146J5 BODY B CAM LEVER 10.45

323 148DS BODY B ASSEMBLY 49.50

BRKS 1019F BRAKE SHOE M *Cannot be ordered 1.10

BST1 13SFU BRAKE SHAFT *Cannot be ordered 1.10

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 24 Scorpion MD 300 300XG RIGHT Product code: 047144 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:26:09+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship this item after you order unless we have in stock at the time of your order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "34 / ROLLER CLUTCH" ,"BRKS / BRAKE SHOE M","BST1/ BRAKE SHAFT"and "94 / SPOOL CLUTCH PIN", they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 13NXD FIXING BOLT 1.10

2 13VAD RETAINER 2.75

3 10FT1 HANDLE FIXING NUT 2.75

4 10SS2 HANDLE CAP 1.10

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4 X 7 X 2.5) 13.75

7 10GDA WASHER 1.65

8 10SSM HANDLE KNOB 11.55

9 10PXZ HANDLE KNOB BUSH 1.65

10 148DC HANDLE SHAFT ASSEMBLY 22.55

11 141J7 HANDLE ASSEMBLY 67.65

12 10QVN HANDLE RECEIVING WASHER 1.65

13 10QVP STAR DRAG SEAL 2.75

14 10KXW STAR DRAG CLICK PLATE 1.65

15 10J26 STAR DRAG CLICK PLATE 1.65

16 10MFC CLICK PIN 1.65

17 10BT2 STAR DRAG CLICK PIN 1.65

18 146AQ STAR DRAG 23.10

19 10A70 STAR DRAG SPRING 2.75

20 10A3X STAR DRAG FIXING NUT 6.05

21 10J1P STAR DRAG SPACER 2.75

22 109F5 DRIVE GEAR WASHER 1.65

24 145RX BODY A NAMEPLATE 1.65

25 146HS MECHANICAL BRAKE KNOB 16.50

26 10896 MECHANICAL BRAKE WASHER 1.10

27 148DJ MECHANICAL BRAKE WASHER 1.65

28 148DK BEARING STOPPER 1.10

29 105BR BALL BEARING (5 X 9 X 3) 13.75

30 108WK O-RING SM14 1.65

31 10TLW FIXING BOLT 1.10

32 10L6E FIXING BOLT 1.65

33 148DD BODY A SET 60.50

34 10F37 ROLLER CLUTCH BEARING *Cannot be ordered 17.05

35 13NWK FIXING BOLT 1.10

37 145RZ ROLLER CLUTCH INNER TUBE 12.65

38 145SX STAR DRAG PLATE 2.75

39 145S8 STAR DRAG WASHER 12.10

40 145SH STAR DRAG WASHER 1.65

41 1024D STAR DRAG WASHER 8.80

42 145SW STAR DRAG PLATE 1.65

43 145S3 DRIVE GEAR 33.00

44 1025A STAR DRAG WASHERS 6.05

45 145SG STOPPER GEAR 2.75

46 145S5 DRIVE GEAR SHAFT 15.95

47 10JDZ SPRING FOR WORM SHAFT GEAR 1.65

48 10HJG WORM SHAFT GEAR PINS 1.65

49 10J47 WORM SHAFT GEAR 2.75

50 10GR7 WASHER 1.10

51 10S3Y FIXING BOLT 1.10

52 145S6 DRIVE GEAR SHAFT FIXING PLATE 1.65

53 105BP BALL BEARING (5 X 9 X 3) 13.75

54 10G6D WORM SHAFT GEAR 1.65

55 105NK E-TYPE RETAINING RING 2.5 1.10

56 10LA8 O-RING 1.65

57 10FJB LEVEL WINDING RECEIVING PLATE 1.65

58 10CFU WASHER 1.10

59 10BHQ WORM SHAFT PIN 2.75

60 108WQ O RING 1.65

61 10SWD LEVEL WINDING ASSEMBLY 13.75

62 1024Q WORM SHAFT GEAR 2.75

63 10C47 MAIN GEAR SHAFT WASHER 1.10

64 1024R WORM SHAFT SEAL 3.85

65 146AP WORM SHAFT 1.65

66 145SF LEVEL WINDING PIPE 1.65

67 105NC E TYPE STOP RING 2 1.10

68 101GT O-RING 1.65

69 14CY5 PINION GEAR 14.30

70 104BC CLUTCH YOKE SPRING 1.10

71 1046X CLUTCH YOKE 1.65

72 10LVJ FIXING BOLT 1.10

73 10QVM CLUTCH CAM PUSH PLATE 3.85

74 10254 CLUTCH CAM 2.75

75 101J2 CLUTCH CLAW 9.35

76 101J3 CLUTCH CLAW SPRING 1.65

77 101J9 CLUTCH PLATE 4.95

78 10LCL FIXING BOLT 1.10

79 10MPD FIXING BOLT 1.10

80 14694 LEVEL-WIND GUIDE FIXING PLATE 1.10

81 145S1 LEVEL-WIND GUIDE 1.65

82 105BT BALL BEARING (8 X 12 X 3.5) 13.75

83 10SUT FIXING BOLT 1.65

84 10251 BODY A SEAT 3.85

85 101J8 CLUTCH LEVER SEAL 3.85

86 145SQ CLUTCH LEVER GUIDE KE (B) 1.65

87 101J4 CLUTCH LEVER 6.05

88 101WJ FIXING BOLT 1.65

89 10MW2 STOPPER CLAW ASSEMBLY 3.85

90 148DE FRAME ASSEMBLY 110.00

91 10EZE BB PUSH SPRING 1.65

92 1024L FRAME CENTER SEAL 2.75

93 105CA BALL BEARING (5 X 11 X 4) 13.75

94 10MD1 SPOOL CLUTCH PIN *Cannot be ordered 1.10

95 10EZ7 O-RING 1.10

96 146JQ SPOOL ASSEMBLY 82.50

97 1054D BEARING PULL-OUT STOPPER 1.10

98 105C2 BALL BEARING (3 X 10 X 4) 13.75

99 10EX5 SPOOL SHAFT CONTACT B 1.10

100 10E7R FIXING BOLT 1.10

101 145S0 CAM LEVER RETAINING RING 1.65

102 145SJ BRAKE DIAL FIXING PLATE 3.30

103 148DF BRAKE PIPE GEAR ASSEMBLY 22.00

104 146GJ O-RING 1.65

105 10MLU O-RING 3.85

106 146HL WASHER 1.10

107 145SU BRAKE DIAL 3.30

108 148DG FRAME B GUIDE ASSEMBLY 36.30

109 145SP O-RING 2.20

110 146HN O-RING WASHER 2.20

111 146HP SEATING RING 1.10

112 145RW BODY B CAM LEVER 10.45

113 148DH BODY B ASSEMBLY 49.50

BRKS 1019F BRAKE SHOE M *Cannot be ordered 1.10

BST1 13SFU BRAKE SHAFT *Cannot be ordered 1.10

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO Genuine] 24 Scorpion MD 300 Spare Spool (300XG , 301XG , 300XGLH , 301XGLH) Product code: 047144 / No.96 / S Part No. 1146JQ / SPOOL ASSEMBLY

HEDGEHOG STUDIO — 2026-08-18T14:24:51+09:00

| ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship this item after you order unless we have in stock at the time of your order.

- We don't accept order cancellations, changes, or refunds after an order unless the products you ordered are not available because SHIMANO/DAIWA Japan doesn't accept our cancellations.

*Please make sure to read about the conditions before you order.

| Product Description

This is SHIMANO genuine spool equipped on 24 Scorpion MD 300 series.

You may use as an extra spool with different line strength.

| Spec

Nylon Line Capacity (lb-m)
16 lb: 210 m / 20 lb: 160 m / 25 lb: 135 m

PE Line Capacity (#-m)
# 4: 180 m / # 5: 140 m / # 6: 120 m

| Compatible Models

- 24 Scorpion MD
( 300XG, 301XG, 300XG, 301XG )

| Wide Selection Available! Click here for fishing lines and accessories.

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 24 Scorpion MD 201XG LEFT Product code: 046925 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:21:16+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "33 / ROLLER CLUTCH", "86 /SPOOL CLUTCH PIN", "BRKS /BRAKE SHOE S" and "BST1 /BRAKE SHAFT", they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10DV5 FIXING BOLT 110

2 144EC RETAINER 385

4 10SS2 HANDLE CAP 110

5 10LFA FIXING BOLT 110

6 104VX BALL BEARING (4X 7X 2.5) 1375

7 104FH WASHER 220

9 10PXZ HANDLE KNOB BUSHING 165

10 145G4 HANDLE SHAFT ASSEMBLY 2255

12 10KXW STAR DRAG CLICK PLATE RETAINER 165

13 10J26 STAR DRAG CLICK PLATE 165

14 10MFC CLICK PIN 165

15 10BT2 CLICK SPRING 165

17 10A70 STAR DRAG SPRING 275

19 10J1P STAR DRAG SPACER 275

20 109F5 DRIVE GEAR WASHER 165

21 100SE WASHER 110

22 105BK BALL BEARING (8 X 12 X 3.5) 1375

23 13U1N MECHANICAL BRAKE KNOB 935

24 10896 MECHANICAL BRAKE WASHER 110

25 1085F MECHANICAL BRAKE WASHER 110

26 1054D BEARING PULL-OUT STOPPER 110

27 105C0 BALL BEARING (3X 10X 4) 1375

28 101GT O-RING 165

29 100BL BEARING SPACER 165

30 105BP BALL BEARING (5X 9X 3) 1375

31 108WK O-RING SM14 165

32 10LCY FIXING BOLT 110

33 1005E ROLLER CLUTCH *Cannot be ordered 1705

35 100BM ROLLER CLUTCH INNER TUBE 605

36 100BK STAR DRAG PLATE 275

37 10SSF STAR DRAG WASHER 1155

39 1023U STAR DRAG WASHER 605

40 13YNT STOPPER GEAR 605

42 10JDY SPRING FOR WORM SHAFT GEAR 165

43 10HJG WORM SHAFT GEAR PINS 165

44 101K8 WORM SHAFT GEAR 385

45 10S3Y FIXING BOLT 110

46 109T1 DRIVE GEAR SHAFT FIXING PLATE 275

47 10DQF DRIVE GEAR SHAFT BUSHING 165

48 10C47 MAIN GEAR SHAFT WASHER 110

49 105NK E TYPE STOP RING 2.5 110

50 143CG METAL SPACER 110

51 14079 RUBBER SPACER 165

53 10FJB LEVEL WINDING RECEIVER 165

54 10CFU WORMSHAFT WASHER 110

55 10BHQ WORM SHAFT PIN 275

56 108WQ O-RING 165

57 10R51 LEVEL WINDING ASSEMBLY 330

58 144EG WORM SHAFT 165

59 13YNV LEVEL-WIND PIPE 165

61 100U9 CLUTCH YOKE SPRING 110

63 10LV0 FIXING BOLT 110

64 100US CLUTCH CAM PUSH PLATE 385

69 10559 FIXING BOLT 165

70 10190 WASHER 165

71 105BK BALL BEARING (8X 12X 3.5) 1375

73 105NB E TYPE STOP RING 1.5 110

74 100UV FIXING BOLT 110

77 10E8N FIXING BOLT 110

79 10E2G LEVEL-WIND GUIDE 165

80 100G7 LEVEL-WIND GUARD BUSHING 110

81 10FJZ WASHER 110

82 105NC E TYPE STOP RING 2 110

83 108PY FRAME TALLY WASHER 165

84 100BH O-RING 110

85 10TM7 O-RING 165

86 10MD0 SPOOL CLUTCH PIN *Cannot be ordered 165

87 10EZ7 O-RING 110

88 141JA SPOOL ASSEMBLY 8250

89 10EX5 SPOOL SHAFT CONTACT TALLY B 110

90 101DR BRAKE PIPE GEAR 935

91 100GW O RING 165

92 10L1Q FIXING BOLT 110

94 140UF WASHER 110

96 144EL SEAT METAL 110

97 103LE FIXING BOLT 110

98 10G6D WASHER 165

99 108WS O-RING 4X 6 110

101 10KNH DAMPER SPRING 165

102 103L7 FIXING BOLT 110

103 10CLF INTERMEDIATE GEAR 165

104 10GQZ CLICK SPRING 110

106 10GR3 WASHER (7X10) 110

301 13V30 HANDLE FIXING NUT 275

302 10EBH HANDLE KNOB 1155

303 141JJ HANDLE ASSEMBLY 6765

304 144ND STAR DRAG 1650

305 10A3U STAR DRAG FIXING NUT 385

306 145G0 BODY A SET 3630

307 10EBM DRIVE GEAR 2255

308 144NE DRIVE GEAR SHAFT 1155

309 144NF LEVEL WINDING GUARD 440

310 10EBD PINION GEAR 1155

311 10TFA CLUTCH YOKE 165

312 100W0 CLUTCH CAM 275

313 1003W CLUTCH CLAW ASSEMBLY 385

314 104CQ CLUTCH CLAW SPRING 165

315 144NK CLUTCH PLATE 275

316 144N6 BODY A SEAT 385

317 144NG CLUTCH LEVER RECEIVER (B) 110

318 144NH CLUTCH LEVER 275

319 145G1 FRAME ASSEMBLY 5610

320 144N8 FRAME B RECEIVER ASSEMBLY 1870

321 144NJ BODY B CAM LEVER 165

322 10263 BRAKE DIAL 385

323 145G2 BODY B ASSEMBLY 1595

BRKS 10RC4 BRAKE SHOE S *Cannot be ordered 110

BST1 13SFU BRAKE SHAFT *Cannot be ordered 110

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

[SHIMANO] Genuine Spare Parts for 24 Scorpion MD 200XG RIGHT Product code: 046918 **Back-order (Shipping in 3-4 weeks after receiving order)

HEDGEHOG STUDIO — 2026-08-18T14:20:21+09:00

ATTENTION:

- US$5.00 commission will be charged additionally.
* Select "+US$5.00 for Genuine Parts" for commission in STEP 2 on the order screen.

- It takes about 3 to 4 weeks for us to get ready to ship the items after you order.

*Please make sure to read about the conditions before you order.

　Reel Part's Schematic Diagram

* Circled figures indicate bearings.
* As for the "33 / ROLLER CLUTCH", "86 /SPOOL CLUTCH PIN", "BRKS /BRAKE SHOE S" and "BST1 /BRAKE SHAFT", they don't sell separately.
These parts are supposed to be provided when customers send the reel to have it repaired or overhauled.
So we cannot provide you with the products unfortunately.
* Please note disassembly is at your own risk.

No. S Part No. Description Price (USD)

1 10DV5 FIXING BOLT 1.10

2 144EC RETAINER 3.85

3 13V31 HANDLE FIXING NUT 2.75

4 10SS2 HANDLE CAP 1.10

5 10LFA FIXING BOLT 1.10

6 104VX BALL BEARING (4X7X2.5) 13.75

7 104FH WASHER 2.20

8 10SSM HANDLE KNOB 11.55

9 10PXZ HANDLE KNOB BUSH 1.65

10 145FR HANDLE SHAFT ASSEMBLY 22.55

11 141J7 HANDLE ASSEMBLY 67.65

12 10KXW STAR DRAG CLICK PLATE RETAINER 1.65

13 10J26 STAR DRAG CLICK PLATE 1.65

14 10MFC CLICK PIN 1.65

15 10BT2 CLICK SPRING 1.65

16 144ED STAR DRAG 16.50

17 10A70 STAR DRAG SPRING 2.75

18 10A3T STAR DRAG FIXING NUT 3.85

19 10J1P STAR DRAG SPACER 2.75

20 109F5 DRIVE GEAR WASHER 1.65

21 100SE BALL BEARING WASHER 1.10

22 105BK BALL BEARING (8 X 12 X 3.5) 13.75

23 13U1N MECHANICAL BRAKE KNOB 9.35

24 10896 MECHANICAL BRAKE WASHER 1.10

25 1085F MECHANICAL BRAKE WASHER 1.10

26 1054D BEARING PULL-OUT STOPPER 1.10

27 105C0 BALL BEARING (3X10X4) 13.75

28 101GT O-RING 1.65

29 100BL BEARING SPACER 1.65

30 105BP BALL BEARING (5X9X3) 13.75

31 108WK O-RING SM14 1.65

32 10LCY FIXING BOLT 1.10

33 1005E ROLLER CLUTCH *Cannot be ordered 17.05

34 145FQ BODY A SET 36.30

35 100BM ROLLER CLUTCH INNER TUBE 6.05

36 100BK STAR DRAG PLATE 2.75

37 10SSF STAR DRAG WASHER 11.55

38 10SRN DRIVE GEAR 22.55

39 1023U STAR DRAG WASHER 6.05

40 13YNT STOPPER GEAR 6.05

41 13YNU DRIVE GEAR SHAFT 11.55

42 10JDY SPRING FOR WORM SHAFT GEAR 1.65

43 10HJG WORM SHAFT GEAR PINS 1.65

44 101K8 WORM SHAFT GEAR 3.85

45 10S3Y FIXING BOLT 1.10

46 109T1 DRIVE GEAR SHAFT FIXING PLATE 2.75

47 10DQF DRIVE GEAR SHAFT BUSHING 1.65

48 10C47 MAIN GEAR SHAFT WASHER 1.10

49 105NK E TYPE STOP RING 2.5 1.10

50 143CG METAL SPACER 1.10

51 14079 RUBBER SPACER 1.65

52 144EF LEVEL WINDING GUARD 4.40

53 10FJB LEVEL WINDING RECEIVER 1.65

54 10CFU WASHER 1.10

55 10BHQ WORM SHAFT PIN 2.75

56 108WQ O-RING 1.65

57 10R51 LEVEL WINDING ASSEMBLY 3.30

58 144EG WORM SHAFT 1.65

59 13YNV LEVEL-WIND PIPE 1.65

60 10SSL PINION GEAR 11.55

61 100U9 CLUTCH YOKE SPRING 1.10

62 100UH CLUTCH YOKE 1.65

63 10LV0 FIXING BOLT 1.10

64 100US CLUTCH CAM PUSH PLATE 3.85

65 100UK CLUTCH CAM 2.75

66 10MQN CLUTCH CLAW 3.85

67 104CP CLUTCH CLAW SPRING 1.65

68 13YNW CLUTCH PLATE 2.75

69 10559 FIXING BOLT 1.65

70 10190 WASHER 1.65

71 105BK BALL BEARING (8 X 12 X 3.5) 13.75

72 144GW BODY A SEAT 3.85

73 105NB E TYPE STOP RING 1.5 1.10

74 100UV FIXING BOLT 1.10

75 144EH CLUTCH LEVER RECEIVER (B) 1.10

76 144EJ CLUTCH LEVER 2.75

77 10E8N FIXING BOLT 1.10

78 145FS FRAME ASSEMBLY 56.10

79 10E2G LEVEL-WIND GUIDE 1.65

80 100G7 LEVEL-WIND GUARD BUSHING 1.10

81 10FJZ WASHER 1.10

82 105NC E TYPE STOP RING 2 1.10

83 108PY FRAME CONTACT WASHER 1.65

84 100BH O-RING 1.10

85 10TM7 O-RING 1.65

86 10MD0 SPOOL CLUTCH PIN *Cannot be ordered 1.65

87 10EZ7 O-RING 1.10

88 141JA SPOOL ASSEMBLY 82.50

89 10EX5 SPOOL SHAFT CONTACT TALLY B 1.10

90 101DR BRAKE PIPE GEAR 9.35

91 100GW O RING 1.65

92 10L1Q FIXING BOLT 1.10

93 144GZ FRAME B RECEIVING ASSEMBLY 18.70

94 140UF WASHER 1.10

95 144EK BODY B CAM LEVER 1.65

96 144EL CAM LEVER 1.10

97 103LE FIXING BOLT 1.10

98 10G6D O-RING 4X6 1.65

99 108WS O-RING 4X6 1.10

100 10SAZ BR KNOB 3.85

101 10KNH DAMPER SPRING 1.65

102 103L7 FIXING BOLT 1.10

103 10CLF INTERMEDIATE GEAR 1.65

104 10GQZ CLICK SPRING 1.10

105 145FT BODY B SET 15.95

106 10GR3 WASHER (7X10) 1.10

BRKS 10RC4 BRAKE SHOE S *Cannot be ordered 1.10

BST1 13SFU BRAKE SHAFT *Cannot be ordered 1.10

| Genuine Spare Spools, Bearings, and Various Custom Parts Genuine Parts and Tuning Parts Compatible With the Scorpion Series Are Available Here!

No.	S Part No.	Description	Price (USD)
*F01	13YQ0	REEL BAG (ACCESSORY)	11.00
1	10DN7	FIXING BOLT	1.65
2	10RZU	RETAINER	1.10
3	10RZZ	HANDLE FIXING NUT	4.95
4	10SML	HANDLE CAP	4.95
5	10DQN	FIXING BOLT	1.65
6	104VX	BALL BEARING (4X7X2.5)	13.75
7	13PK1	WASHER	1.10
8	1004X	HANDLE KNOB	11.55
9	13Y7Z	HANDLE SHAFT ASSEMBLY	34.10
10	13Y80	HANDLE ASSEMBLY	112.20
11	13V36	HANDLE HOLDER WASHER	1.65
12	10KXV	STAR DRAG CLICK PLATE	1.65
13	10J1Y	STAR DRAG CLICK PLATE	1.65
14	10B27	CLICK PIN	1.65
15	10988	CLICK SPRING	1.65
16	13Y87	STAR DRAG	22.00
17	100CU	WASHER	1.10
18	10A71	STAR DRAG SPRING	2.75
19	10A0C	STAR DRAG FIXING NUT	2.75
20	10J1N	STAR DRAG SPACER	1.65
21	10D60	MAIN GEAR WASHER (C)	1.65
22	105PW	STAR DRAG BEARING WASHER	1.10
23	10EX8	BALL BEARING (8 X 12 X 3.5)	13.75
24	1027V	O-RING	1.65
25	13Y88	MECHANICAL BRAKE KNOB	20.35
26	10896	MECHANICAL BRAKE WASHER	1.10
27	1057S	SPOOL SHAFT CONTACT (B)	1.10
28	10L2F	MECHANICAL BRAKE KNOB CLICK PLATE	2.75
29	10L6X	MECHANICAL BRAKE KNOB SOUND STOP RING	2.75
30	13Y81	MECHANICAL BRAKE KNOB ASSEMBLY	36.85
31	1057X	EXTRACTION STOP	1.65
32	105BP	BALL BEARING (5X9X3)	13.75
33	108W8	O-RING S-16	1.65
34	10C3N	FIXING BOLT	2.75
35	1005E	ROLLER CLUTCH *Cannot be ordered	17.05
36	13Y82	MAIN UNIT A SET	132.00
37	10BN3	ROLLER CLUTCH INNER TUBE	6.05
38	10D55	STAR DRAG PLATE	6.05
39	10JB0	DRAG CLICK SYLLATIC RATCHET	2.75
40	10CKS	STAR DRAG WASHER	6.05
41	10C0T	DRAG CLICK PIN	2.75
42	10J8A	DRAG CLICK SPRING	1.65
43	10J87	DRAG SPRING HOLDER	1.65
44	10RZQ	DRIVE GEAR	24.75
45	10CJ4	STAR DRAG WASHER (A)	3.85
46	10R5Z	STOPPER GEAR	2.75
47	13ULL	DRIVE GEAR SHAFT	13.20
48	10HJF	PIN FOR WORM SHAFT GEAR	1.65
49	10JDX	SPRING FOR WORM SHAFT GEAR	1.65
50	10057	WORM SHAFT GEAR	2.75
51	10LVF	FIXING BOLT	1.10
52	100GK	DRIVE GEAR SHAFT FIXING PLATE	1.10
53	10SAM	BALL BEARING (4X7X2)	13.75
54	13PKS	WASHER	1.10
55	10DR5	FIXING BOLT	1.10
56	10SZ4	O-RING	1.65
57	105NC	E TYPE STOP RING 2	1.10
58	10FNX	WORM SHAFT GEAR	2.75
59	10N9Q	WORM SHAFT HOLDER (A)	1.65
60	10T7S	WORM SHAFT EXTRACTION STOP	1.10
61	13Y89	LEVEL WINDING GUIDE	3.85
62	100GT	WORM SHAFT	5.50
63	13Y8A	LEVEL WINDING PIPE	7.15
64	104SP	WORM SHAFT HOLDER (B)	1.65
65	10G8G	WASHER	1.10
66	10RZW	PINION GEAR	17.05
67	13Y8B	CLUTCH YOKE SPRING	1.10
68	10EE4	CLUTCH YOKE	1.10
69	101CN	FIXING BOLT	1.65
70	10F42	CLUTCH CAM PUSH PLATE	3.85
71	10SKS	CLUTCH CAM	2.75
72	105ZV	CLUTCH CLAW	3.85
73	10N1V	CLUTCH CLAW SPRING	1.65
74	13TD2	CLUTCH PLATE	2.20
75	10559	FIXING BOLT	1.65
76	13Y8C	FRAME (A) BUSH	2.75
77	100BD	FIXING BOLT	1.65
78	10MPS	FIXING BOLT	1.65
79	13UEF	BODY A SEAT	1.65
80	10TED	LEVEL-WIND ASSEMBLY	51.70
81	100GC	WORM SHAFT PIN EXTRACTION STOPPER	1.10
82	10908	O-RING	1.65
83	100GJ	WORM SHAFT PIN	4.40
84	10GA7	WASHER	1.10
85	13Y83	FRAME ASSEMBLY	165.00
86	13TD3	CLUTCH LEVER HOLDER	1.10
87	10282	CLUTCH LEVER ASSEMBLY	7.70
88	13Y8D	FRAME B CLUTCH CAM	1.10
89	10TP0	FIXING BOLT	1.10
90	13Y8E	LINE GUARD	3.85
91	10E7H	O RING	1.10
92	10RUC	BALL BEARING (3X8X2.5) *Cannot be ordered	15.95
93	10MCZ	SPOOL CLUTCH PIN *Cannot be ordered	2.75
94	13Y84	SPOOL ASSEMBLY	134.75
95	10EEA	FIXING BOLT	1.10
96	10TK4	BRAKE FIXING PLATE	3.85
97	10DGJ	BRAKE COIL SPRING	1.10
98	10E7E	MAGNET HOLDER ASSEMBLY	29.70
99	10EEK	BRAKE MOUNTING STAND	3.30
100	101A9	BEARING RETAINING CLAMP	1.10
101	1085H	MECHANICAL BRAKE WASHER	1.10
102	1006P	O-RING	1.65
103	13Y8F	FIXING BOLT	1.65
104	13Y8G	BRAKING WASHERS	1.10
105	13Y8H	FIXING BOLT	1.65
106	13Y85	FRAME B RECEIVER ASSEMBLY	38.50
107	104MX	BODY B CAM LEVER ADJUSTMENT WASHER	1.65
108	10T02	CAM LEVER ADJUSTMENT WASHER	2.75
109	13Y8J	BODY B CAM LEVER	1.10
110	10TNF	O RING	1.65
111	13Y8K	BRAKE CAM	2.75
112	10CFZ	O-RING	1.65
113	13Y8L	BRAKE DIAL	31.35
114	13Y8M	BODY B SEAL	1.10
115	13Y8N	BODY B	77.00
116	13Y86	BODY B ASSEMBLY	132.00
BNKI	13YQ1	EXPLODED VIEW (ACCESSORY)	1.65
TRST	13YPY	INSTRUCTION MANUAL (ACCESSORY)	1.65

Model	Product Code	S Part No.	Part No./Part Name
100	042323	100TJ	0094 SPOOL ASSEMBLY (WITH BEARING)
101	042330	100TJ	0094 SPOOL ASSEMBLY (WITH BEARING)
100HG	042361	100TJ	0094 SPOOL ASSEMBLY (WITH BEARING)
101HG	042378	100TJ	0094 SPOOL ASSEMBLY (WITH BEARING)

No.	Part Name	Part Code	Price (USD)
1	RS PLATE	6M309201	40.70
2	LEVER PLATE SP	6J631901	2.20
3	LEVER PLATE PIN	6J286301	2.20
4	RS PLATE O-RING	6J197901	1.10
5	LEVER PLATE (A)	6M049001	4.40
6	LEVER PLATE (B)	6J286101	2.20
7	LEVER PLATE (C)	6J645201	2.20
8	BRAKE DIAL SC	6G940402	2.20
9	BRAKE DIAL W	6H159201	1.10
10	BRAKE DIAL	6M053601	7.70
11	BRAKE DIAL LEAF SP	6J886201	2.20
12	SET PLATE	6M054601	44.00
13	MAG HOLDER	6M054701	24.20
14	SET PLATE SC (A)	6H666002	2.20
15	SET PLATE SC (B)	6G939303	2.20
16	MAG HOLDER RING	6J315701	2.20
17	RS BEARING W (A)	63757404	1.10
18	RS BEARING W (B)	63757411	1.10
19	RS BEARING W (C)	6G185101	1.10
20	RS BALL BEARING	6G511506	15.40
21	RS BALL BEARING O-RING	6G703201	1.10
22	RS BEARING RING	6F032201	2.20
23	SPOOL HOLDER O-RING	6H770601	1.10
24	SPOOL HOLDER SP RETAINER	63208002	2.20
25	SPOOL HOLDER COLLAR (B) W	6J497001	1.10
26	SPOOL HOLDER COLLAR (B) SP	6M042201	2.20
27	SPOOL HOLDER COLLAR (B)	6M391901	3.30
28	SPOOL HOLDER SP	6M042001	2.20
29	SPOOL HOLDER	6M308701	19.80
30	SPOOL HOLDER COLLAR (A)	6M041701	2.20
31	SPOOL HOLDER COLLAR (A) W	63755202	1.10
33	SPOOL PIN	6H358801	2.20
34	SPOOL BEARING COLLAR	6H232201	2.20
35	SPOOL BALL BEARING SP	6M052601	2.20
36	SPOOL BALL BEARING W (A)	6M052501	1.10
37	SPOOL (23-37, 120-122)	6Z026601	176.00
38	FRAME	6M309601	74.80
39	FRONT COVER	6M041003	12.10
40	FRONT COVER SC	6H531508	2.20
41	CLUTCH LEVER	6M048401	9.90
42	CLUTCH LEVER PLATE (L)	6M040501	2.20
43	CLUTCH LEVER PLATE (R) *Not available	6M040601	2.20
44	OSCILLATING POST	6M041101	2.20
45	LS COVER PLATE	6M047901	2.20
46	CLUTCH CAM BALL BEARING	6G431008	15.40
47	CLUTCH CAM BEARING COLLAR	6M518401	7.70
48	KICK LEVER PLATE (A)	6M048301	3.30
49	KICK LEVER PLATE SC	6H531508	2.20
50	KICK LEVER PLATE SP	6M060601	2.20
51	KICK LEVER	6J638601	6.60
52	CLUTCH CAM PLATE (A)	6M048201	2.20
53	CLUTCH CAM	6M048001	3.30
54	CLUTCH CAM PLATE (B)	6M048101	3.30
55	CLUTCH CAM PLATE (B) W	6M070001	1.10
56	CLUTCH CAM PLATE (B) SC	6B360406	2.20
57	CLUTCH CAM PLATE (C)	6H659101	3.30
58	CLUTCH CAM PLATE SC	6B032904	2.20
59	CLUTCH PLATE	6M157501	3.30
60	CLUTCH SP	6J313901	2.20
61	PINION + DRIVE GEAR SET	6Z026670	56.10
62	PINION RING	6H448401	2.20
63	PINION BEARING W	6J073501	1.10
64	PINION BALL BEARING *Cannot be ordered	6J019303	45.10
65	PINION BEARING COLLAR *Cannot be ordered	6J724501	7.70
66	LS PLATE	6M308901	67.10
67	ZERO ADJUSTER O-RING	6J279701	1.10
68	PINION SHAFT	6G931001	3.30
69	ZERO ADJUSTER W (A)	6H161001	1.10
70	ZERO ADJUSTER W (B)	6B175503	1.10
71	ZERO ADJUSTER	6J279602	19.80
72	LS PLATE SC (A)	6G945811	2.20
73	LS PLATE SC (B)	6G040802	2.20
74	LS PLATE SC (C)	6G945818	2.20
75	WORM SHAFT RETAINER	63205901	2.20
76	WORM SHAFT W	6B411702	1.10
77	WORM SHAFT COLLAR	6G720001	2.20
78	LEVEL WINDING	6M054201	58.30
79	LEVEL WINDING PIN	6J740201	3.30
80	POLE	6J740101	3.30
81	POLE W	6M161301	1.10
82	LEVEL WINDING O-RING	6G252202	1.10
83	WORM SHIELD	6M048901	3.30
84	WORM SHAFT	6M016701	8.80
85	WORM SHAFT COLLAR	6G720001	2.20
86	WORM SHAFT GEAR	6M048801	4.40
87	WORM SHAFT GEAR RETAINER	6B339801	2.20
88	GEAR SHAFT W	6G099801	1.10
89	GEAR SHAFT RETAINER	63208002	2.20
90	GEAR SHAFT BALL BEARING	6G466201	15.40
91	GEAR SHAFT PLATE (A)	6J281101	3.30
92	GEAR SHAFT PLATE SC	6G297002	2.20
93	WORM GEAR	6M048601	3.30
94	GEAR SHAFT	6M308402	18.70
95	RATCHET	6H660901	3.30
96	RATCHET W	6E708901	2.20
97	PINION + DRIVE GEAR SET	6Z026670	56.10
98	DRAG W	6H359001	8.80
99	DRIVE COLLAR	6J740501	17.60
100	DRIVE COLLAR SP	6M025201	2.20
101	DRIVE COLLAR PIN	6J566201	2.20
102	CLUTCH RING	6J327701	8.80
103	ONE-WAY CLUTCH	6G819801	20.90
104	CLUTCH RING W	6B553803	1.10
105	HANDLE BALL BEARING	6G431008	15.40
106	HANDLE BALL BEARING W	6B553801	1.10
107	DRAG HOLDER	6F028203	3.30
108	DRAG LEAF SP	6F032401	2.20
109	DRAG SP・W	61508901	2.20
110	STAR DRAG W	6H929501	2.20
111	STAR DRAG NUT	6J141002	7.70
112	STARDRAG SP	6J011901	2.20
113	STAR DRAG	6J673908	30.80
114	HANDLE W (A)	6J102801	1.10
115	HANDLE W (B)	6J101301	3.30
116	HANDLE	6M308301	94.60
117	HANDLE NUT	6G793310	4.40
118	HANDLE CAP	6J625401	4.40
119	HANDLE CAP SC	6G835504	2.20
120	SPOOL BALL BEARING W (B)	6F774601	1.10
121	SPOOL BEARING RING	6J149501	2.20
122	SPOOL BALL BEARING	6G511506	15.40
200	HANDLE KNOB W	6B411703	1.10
201	HANDLE KNOB SP・W	6H744801	1.10
202	HANDLE KNOB	6M009801	24.20
203	HANDLE KNOB BALL BEARING	6G469009	15.40
204	HANDLE KNOB SC	6B679308	2.20
205	HANDLE KNOB CAP	6M009602	2.20

Schematic Number	Part Number	Part Name	Price (USD)
1	1499313	FRAME	55.00
2	1415607	SLIDE WASHER	2.20
3	1415608	SLIDE WASHER	2.20
4	1452852	LINE GUIDE	5.50
6	1280905	LEVEL WIND TUBE	3.30
7	1280906	WORM SHAFT	16.50
8	1125729	BALLBEARING	6.60
9	1125732	WORM SHAFT GEAR	1.10
10	1125733	WORM SHAFT PIN	0.55
11	1452762	LINE GUIDE SHAFT	3.30
13	1313359	WORM SHAFT PIN HOLDER	2.20
14	1490867	WASHER	2.20
15	1124201	RETAINER	0.55
16	1125806	PAWL	3.30
17	1116193	WASHER	0.55
18	1129323	LINE GUIDE NUT	0.77
19	1452923	FRONT COVER	5.50
20	1452764	SCREW	2.20
21	1452765	CLUTCH CAM	3.30
22	1415619	LINK PLATE	2.20
23	1415620	SCREW	2.20
24	1289969	KICK LEVER	3.30
25	1452766	CLUTCH SPRING	2.20
26	1125745	KICK LEVER SPRING	0.55
27	1185695	WORM SHAFT WASHER	1.76
28	1415621	CLUTCH PLATE	2.20
29	1415622	SCREW	2.20
30	1380616	SCREW	2.20
31	1452767	THUMB BAR	3.30
32	1252078	SCREW	1.76
33	1499314	MAIN GEAR SHAFT	13.20
34	1125747	WASHER	0.55
35	1251634	LEVEL WIND GEAR	1.76
36	1281130	MAIN GEAR SHAFT PLATE	2.20
37	1187625	SPOOL BALL BEARING	8.80
38	1124201	RETAINER	0.55
39	1372152	SCREW	2.20
40	1281131	YOKE	2.20
41	1493329	PINION	11.00
43	1452769	RATCHET	2.20
44	1452770	DRAG WASHER	3.30
45	1452875	MAIN GEAR	27.50
47	1452855	DRAG WASHER	5.50
48	1452856	DRAG WASHER	2.20
51	1452857	PRESSURE WASHER	2.20
52	1257782	SLEEVE	2.20
53	1452773	WASHER	2.20
54	1116237	YOKE SPRING	0.55
55	1125766	PINION SHAFT	5.50
56	1116226	RETAINER	0.55
57	1499330	GEAR SIDE PLATE	33.00
58	1275594	OWC	27.50
59	1499316	COLLAR	3.30
61	1452775	O-RING	2.20
62	1493307	BALL BEARING	27.50
63	1104790	RING	0.55
64	1125768	CLICK WASHER	1.10
65	1125769	CLICK SPRING	1.65
66	1452776	FRICTION WASHER	1.10
67	1125771	RUBBER WASHER	0.55
68	1452777	CLICK WASHER	2.20
69	1499317	BRAKE KNOB	16.50
70	1452779	SCREW	2.20
71	1452780	SCREW	2.20
72	1415630	LUBE PORT	2.20
73	1252078	SCREW	1.76
74	1125779	CLICK SPRING HOLDER	1.65
75	1125780	CLICK SPRING	0.77
76	1117208	SPRING WASHER	0.55
77	1132935	WASHER	0.55
78	1499331	STAR WHEEL	27.50
79	1125783	WASHER	0.55
80	1499319	PALM SIDE PLATE	38.50
81	1415757	MAG DIAL	3.30
82	1415634	MAG DIAL PLATE	2.20
83	1125780	CLICK SPRING	0.77
84	1415635	SLIDE CAM	3.30
85	1185710	RIGHT SIDE COVER CAP SCREW	0.55
86	1125771	RUBBER WASHER	0.55
87	1452785	BEARING HOUSING	16.50
88	1313372	CLICK PIN SPRING	2.20
89	1313371	CLICK PIN	2.20
90	1452786	CAM LOCK LEVER	3.30
91	1452787	MAGNET HOLDER	3.30
92	1453268	MAGNET PLATE	2.20
93	1116222	MAGNET	2.20
94	1452788	MAGNET PLATE	2.20
95	1302674	MAGNET	4.40
96	1313476	SPRING	2.20
97	1415641	SLIDE CAM	3.30
98	1380655	SCREW	2.20
99	1415622	SCREW	2.20
100	1125797	WASHER	0.55
101	1128194	BALLBEARING	8.80
102	1104790	RING	0.55
106	1308854	SPOOL (K)	60.50
107	1144215	BALL BEARING	8.80
108	1192826	SPOOL SHAFT PIN	2.20
114	1308857	HANDLE	22.00
115	1208088	BUSHING FOR BALL BEARING	2.20
116	1347132	HANDLE KNOB	8.80
117	1281319	BALL BEARING	6.60
118	1281320	SCREW	1.76
119	1347133	HANDLE KNOB CAP	6.60
121	1372161	HANDLE NUT	2.20
122	1252035	HANDLE NUT COVER	3.30
123	1203407	SCREW	0.55
124	1499332	GEAR SIDE COMPLETE	49.50
125	1499321	HANDLE COMPLETE	88.00
126	1499322	PALM SIDE COMPLETE	154.00
127	1308855	SPOOL COMPLETE (K)	77.00

Schematic Number	Part Number	Part Name	Price (USD)
	5131	SPRING WASHER	2.20
	9764	WASHER	2.20
	13362	SCREW	2.20
	21715	SCREW	2.20
	25398	BRAKE WEIGHT ARM	3.30
	25802	DRAIVE GEAR PLATE	2.20
	25803	LOCK WASHER	6.60
	25807	IVCB-DIAL	8.80
	25808	IVCB-CAM	8.80
	25810	BRAKE PLATE HOLDER	8.80
	25812	COG WHEEL	2.20
	25813	COG WHEEL	2.20
	25815	LOCKER BUSHING	3.30
	25818	BRAKE WEIGHT HOLDER	3.30
	25837	SPRING HOLDER	6.60
	25841	LIFT PLATE	13.20
	25864	PINION GEAR	31.90
	25865	DRAIVE GEAR	44.00
	25874	BRAKE CLICK SPRING	5.50
	25875	BRAKE CLICK RATCHET	5.50
	25876	BRAKE CLICK RATCHET	2.20
	25877	DRAG CLICK SPRING	5.50
	25879	DRAG CLICK RATCHET	2.20
	25885	O-RING	2.20
	25886	CAP WASHER	2.20
	25890	RATCHET HOLDER	5.50
	51765	PILOT GUIDE	6.60
	1128194	BALLBEARING	8.80
	1137327	HANDLE	33.00
	1140957	BALL BEARING	33.00
	1141514	BALLBEARING	13.20
	1141521	INNERPLATE RIGHT	22.00
	1141523	OUTER SIDE PLATE RIGHT	88.00
	1141528	BRAKEWASHER	6.60
	1141531	INNERPLATE LEFT	22.00
	1141532	BALLBEARING	13.20
	1141535	OUTER SIDE PLATE	94.60
	1141538	SPOOL CONTROL CAP	16.50
	1153550	CLICKPLATE	8.80
	1157042	SCREW	2.20
	1157043	STAR WHEEL	22.00
	1160543	MAIN GEAR BUSHING	22.00
	1160560	LINE CARRIAGE	22.00
	1160766	SPRING	2.20
	1160820	SPRING	2.20
	1205084	FRAME	176.00
	1205492	LEVELWIND TUBE	16.50
	1208144	WORM SHAFT COMPLETE	44.00
	1224248	SPOOL	95.70

Model	Max. Drag force (kg)	Line Capacity PE (No.-m)
4000D-CXH	12	1.5-430
		2-300
5000D-CXH	12	2-350
		2.5-300
6000D-P	12	3-300
		4-220
6000D-H	12	3-300
		4-220
8000-P	15	3-400
		4-300
8000-H	15	3-400
		4-300
10000-H	15	4-400
		5-300
14000-H	15	5-400
		6-300
18000	20	6-400
		8-300

Model No.	Product Name	Size	JAN Code
TBSC-002	“KOKUCHI Style” 1170 x 1170 (3mm)	1170 x 1170	4580796240324
TBSC-004	“KOKUCHI Style” 1170 x 1060 (3mm)	1170 x 1060	4580796240348
TBSC-001	“KOKUCHI Style” 1170 x 1170 (2.5mm)	1170 x 1170	4580796240317
TBSC-003	“KOKUCHI Style” 1170 x 1060 (2.5mm)	1170 x 1060	4580796240331
TBST-002	“TAGEI Style” 1170 x 1170 (3mm)	1170 x 1170	4580796240287
TBST-004	“TAGEI Style” 1170 x 1060 (3mm)	1170 x 1060	4580796240300
TBST-001	“TAGEI Style” 1170 x 1170 (2.5mm)	1170 x 1170	4580796240270
TBST-003	“TAGEI Style” 1170 x 1060 (2.5mm)	1170 x 1060	4580796240294

Material	Body: Stainless Steel Brake Blocks: Bakelite
Weight	Body: Approx. 1 g
Compatible Models	Ambassadeur 4000–6000 series ULTRACAST reels Models using part #19372 *Note: Not compatible with part #1366399
Compatible Brake Blocks	Included brake blocks/ Genuine bakelite brake block (part #22565)
Included Brake Block Sizes	Large: ø3 x ø1.4 x 3.5 mm (Size equivalent to B-BLOCK Large brake block: ø3.0 mm x 3.5 mm) Medium: ø3 x ø1.4 x 2.0 mm (Size equivalent to genuine bakelite block included in factory tune) Small: ø2 x ø1.4 x 2.0 mm (Avail original size) *2 of each

Application Area	Product Code /S Part No.	Product Name	Usage Details	Spin	Conv.	Elec.	Bait	Lever
Line Roller	033055 10U0H	DG18 Special Water-Repellent (5g)	Line roller section of all spinning reels	●
Drag / Bail	033055 100SF	DG01 ACE-0 (30g)	Felt drag washers (for general spinning), carbon washers (for conventional reels), friction rings of spinning reels, bail sliding parts, etc.	●	●	●	●
Handle / Gear / Worm Shaft	033055 100MB	DG06 SHIP-0 (30g)	Gears and worm shafts of general spinning reels, various handle components, bearings including A-RB (excluding Tiagra)	●	●	●	●
Roller Clutch	033130 10LQ0	B-100 (4.5g)	Roller clutch (spinning), brake pipe and brake ring of centrifugal brakes (non-DC baitcasting reels), spool shafts (general), general bearings, etc.	●	●	●	●	●

Application Area	Product Code /S Part No.	Product Name	Usage Details	Spin	Conv.	Elec.	Bait	Lever
Drag	033055 100SF	DG01 ACE-0 (30g)	Felt drag washers (general spinning), carbon drag washers for conventional reels, bail sliding parts, etc.	●	●	●	●
Handle / Spool Shaft	033055 100MB	DG06 SHIP-0 (30g)	Gears and worm shafts (general spinning), various handle components, A-RB and other bearings (excluding Tiagra)	●	●	●	●
Gear / Worm Shaft	033055 100SG	DG04 ACE-2 (30g)	Gear section for conventional and electric reels (excluding Tiagra)		●	●	●	●
Drag (Tiagra)	033055 100SJ	DG09 Disk Drag (30g)	Exclusive for 2-speed drag disks of Tiagra reels					●
Gear (Tiagra)	033055 100MC	DG07 TBM-0 (30g)	Drive gear and bearing section of Tiagra reels					●

Application Area	Product Code /S Part No.	Product Name	Usage Details	Spin	Conv.	Elec.	Bait	Lever
Drag / Worm Shaft	033055 100SF	DG01 ACE-0 (30g)	Felt drag washers (general spinning), carbon drag washers for conventional reels, bail sliding parts, etc.	●	●	●	●
Handle	033055 100MB	DG06 SHIP-0 (30g)	Gears and worm shafts (general spinning), various handle components, A-RB and other bearings (excluding Tiagra)	●	●	●	●
Gear	033055 100SG	DG04 ACE-2 (30g)	Gear section for conventional and electric reels (excluding Tiagra)		●	●	●	●
Spool Shaft / Brake Pipe (non-DC)	033130 10LQ1	SSRO-01 (4.5g)	Worm shafts (general), general bearings, spool shaft of baitcasting reels, anti-corrosion for exterior parts (e.g., shaft rivet area)	●	●	●	●	●
Brake Ring	033130 10LQ0	B-100 (4.5g)	Roller clutch (spinning), brake pipe and brake ring of centrifugal brakes (non-DC baitcasting reels), spool shafts (general), general bearings, etc.	●	●	●	●	●
Spool Shaft / Brake Pipe (non-DC)	033130 10TR6	BFS Oil (4.5g)	Spool support bearings for BFS baitcasting reels				●