[KAKEDZUKA DESIGN WORKS] Titanium Handle Lock Nut (M7/M8)
■ Product Description
is to strengthen handle lock nut of solid titanium 64 made of alloy lightweight.
In accordance with the handle that is your, it was produced two types of different heights.
On the left side studio composite-only "long type" , for the right-hand side is a general handle "standard type" is.
■ studio Composite dedicated long type
was specially designed in order to than usual, such as studio composite corresponding to the thick handle.
To increase the height of the nut than conventional, by securing a lot of jump out the side from the steering wheel, it has to allow tightening of the nut firmly wrench.
In addition, because of the robust nut than made of duralumin, it will screw prevent disconnection of the nut in power fight, such as Gori wound.
This is an example of mounting a standard nut to studio composite of the handle are included.
In the case of the studio composite thick handle, it is because only the side portion of the nut is a little does not pop out from the handle, difficult to write tighten the nut with a wrench.
If you use a dedicated long nut, it will pop out just good height of the side, firmly can be tightening with a wrench.
※ Calcutta Conquest No. 300, No. 400, reel Shimano of large size, such as No. 300 Grappler is the M8 size for Daiwa Abu.
※ Steez TW, bolt type of titanium nut, such as Zillion TW is the production schedule in the future.
■ General handle for the standard type
Design is almost the same as the duralumin handle lock nut of HEDGEHOG STUDIO, but it was cut out of the material in the titanium alloy 64.
In the case of studio composite other than the handle, people here of the standard type is recommended to clean it looks.
※ Please note that
mounting the above-mentioned of such resin retainer, in recent Shimano genuine new handle, here titanium nuts Both types can not be used because it does not fit the retainer size of.
Nut corresponding to these new handles, "the new model corresponding Shimano genuine handle lock nut M7"Please purchase.
The new model corresponding Shimano genuine handle lock nut M7