[Fishman] BC4 5.10H POWER GRIPZ EDITION (Rod)

| BC4 5.10 Series Updated as the Power Grip Edition

A powerful 4-piece rod that bends sharply from the center section with quick recovery, making it easy to achieve long casting distances and turning lures into bullet-like liners.
And the ease of handling fish is on another level.

The entire #4 grip section has been completely redesigned.
Slip resistance and durability have been enhanced.

1. Power Grip
As the subtitle suggests, the #4 butt section is equipped with a rubber grip, providing anti-slip performance and a firm hold when fighting large fish.
2. Reel Seat
Adopts a blank-touch design.
The reel seat itself is slimmer, making it easier to grip firmly.
3. Lower Trigger Grip
All changed to EVA.
4. End Grip
Changed to compressed cork and EVA.
Compressed cork was adopted for its high friction coefficient, anti-slip properties, moderate elasticity, and improved durability.


| Capable of Casting the Frequently Used 2 - 4 oz Big Baits

The heavy-class rod in the BC4 pack rod series.
A model designed to enhance the feel of long-distance casting and pinpoint shooting with 2 - 4 oz lures.
To achieve this, the body section is reinforced by 20% compared to the MXH, and the tip section is reinforced by 10%.
This allows the tip to bend moderately on the bite, with an adjusted slower rebound speed to follow the fish.
The body below it does not bend excessively, allowing for solid hook sets.
This reinforcement of the section also enables better loading when casting heavy lures, leading to increased initial lure speed during the follow-through.
When not using heavy lures, casting from 10g is possible.
To prevent breakage from sudden dives at the angler's feet, a flexible material is wound in the middle layer of #2 and #3, but this mechanism will not activate unless a monster fish applies significant load.


| Please Be Aware of Joint Loosening

Due to the nature of pack rods, joints may loosen with repeated casting.
If each joint is not properly connected, it may cause damage to the joint section or lead to the rod breaking.
Applying ferrule wax helps prevent the rod from coming apart during casting and protects the joint section by preventing seizure caused by moisture intrusion.
We recommend checking that the joints have not loosened and using ferrule wax after every few casts.


| Specifications

Overall Length: 179cm (5ft10in)
Number of Pieces: 4-piece
Folded Length: 49cm
Grip Length: 39.5cm
Weight: 186g
Material: 4-Axis Carbon
Guides: K Guide Titanium + Stainless (Titanium for TOP only)
Lure Weight: 10 - 100g
Line: PE 3 - 10
JAN: 4571487900702