[Avail] DAIWA Microcast Spool for 21 ZILLION [21ZIL33R]

[Avail] DAIWA Microcast Spool for 21 ZILLION [21ZIL33R]

Our Selling Price: US$100.10 [Regular Price: US$143.00]

Quantity:


Microcast Spool 21ZIL33R for DAIWA 21 ZILLION

Model Name

Microcast Spool 21ZIL33R


Product Introduction

This is the Microcast Spool designed for the DAIWA 21 ZILLION.
This spool uses extra-super duralumin, known for its lightness and strength.
Compared to the original spool, the weight reduction of this spool enhances casting response, allowing for a more comfortable casting of a wide range of lure weights.
The line capacity is set to PE 1.2 / 100m, making it a versatile PE spool suitable for freshwater and saltwater use.
This product is designed specifically for use with PE lines.
The brake rotor is fixed.


Color



Black


Specifications

Groove Depth 3.3mm
Spool Body Material Super Duralumin
Spool Shaft Material Super Duralumin
Compatible Bearings Outer Diameter 11mm × Inner Diameter 4mm × Thickness 4mm
Not compatible with genuine bearings
Weight 7.3g (Genuine: 13.0g)
*Including ball bearings
Compatible Models 21 ZILLION SV TW 1000
Compatible with each gear and left/right handle only



Line Capacity

PE 0.8 1.0 1.2
21ZIL33R 150m 120m 100m
Genuine 300m 250m 200m

Fluorocarbon 6lb 8lb 10lb
21ZIL33R 100m 80m 60m
Genuine 190m 140m 110m


*Measured using Yamatoyo Tegus line.
The "fluorocarbon" indication is a guideline for spool capacity and not a recommendation for use.


Installation Method




Cautions

*Start the brake setting at MAX during casting.
*The microcast spool is thinned to the necessary strength limit for weight reduction. Due to the shallow groove, the internal cavity of the spool is designed to be larger, which may cause the reel’s operating sound to echo inside the spool and sound louder. This does not affect practical fishing use, so please use it with confidence.
*Using the spool rim for thumbing may cause the anodized coating to peel off due to friction. Perform thumbing on the spool’s line-winding surface. Applying too much tension when winding the line onto the spool can cause damage, particularly when using stretchy lines like nylon and winding with looser tension.
*Grease is applied to the bearings to prevent rust and maintain quality during shipment. If the spool rotation feels heavy, please clean the bearings with a degreaser and lubricate with your preferred oil before use.
*When replacing bearings, pay attention to the bearing size.
*When replacing bearings, be careful not to damage the shaft or drive pin and do so at your own risk.


Gallery