[SHIMANO Genuine Product] Line Roller for 21 TWIN POWER XD, 20 TWIN POWER, 17 TWIN POWER XD, 18 STRADIC SW, 19 VANQUISH (1 piece)

[SHIMANO Genuine Product] Line Roller for 21 TWIN POWER XD, 20 TWIN POWER, 17 TWIN POWER XD, 18 STRADIC SW, 19 VANQUISH (1 piece)

Our Selling Price: US$23.87 [Regular Price: US$34.10]

Quantity:

Product concept

(SHIMANO genuine)



A genuine line roller with a built-in bearing.
Please use it as a spare part for maintenance.

The latest model SHIMANO line rollers cannot be disassembled because the line roller body and line roller bearings are integrated due to the core protection function.
Therefore, if the bearing is worn and you want to replace it, you need to replace the entire line roller.。
Also, bearings cannot be added.

Quantity: 1 piece


Compatible models

・21 TWIN POWER XD
( C3000HG, C3000XG, 4000PG, 4000HG, 4000XG, C5000XG )

・20 TWIN POWER
( C2000S, C2000SHG, 2500S, 2500SHG, C3000, C3000MHG, C3000XG, 3000MHG, 4000, 4000PG, 4000MHG, 4000XG, C5000XG )

・17 TWIN POWER XD
( C3000HG, C3000XG, 4000XG, C5000XG )

・18 STRADIC SW
( 4000HG, 4000XG, 5000XG, 5000PG )

・19 VANQUISH
( 1000SSSPG, C2000S, C2000SSS, C2000SHG, C2500SHG, C2500SXG, 2500S, 2500SHG, C3000SDH, C3000SDHHG, C3000, C3000MHG, C3000XG, 3000MHG, 4000MHG, 4000XG, C5000HG, C5000XG )


* Since the structure of all genuine line roller replacements is similar, we will explain using 14 STELLA as an example.



First, remove the bolt that secures the line roller.



Depending on the condition of the reel, it may be stuck, so be careful not to crush the threads when removing it.

* Advice


Depending on the type of reel, the threads may be negative or Torx.
Please prepare a screwdriver suitable for your reel.



A total of 6 parts can be removed by removing the screws.
In this, replace the line roller with a new one.



After replacing with a new line roller, we will install the parts in the order of the above numbers.



First, attach the part (1).
This part has a mounting orientation, so mount it correctly according to the shape.



After installation, keep pressing the part (1) with your finger until the work is completed.
Please note that if the force is loose and the parts are misaligned, it will not be installed correctly.



Install the part (2).



Install the line roller body of (3).

* Advice



There is a direction for mounting the line roller.
If you look at the side of the line roller, you can see that the widths on both sides of the groove are different.
Install with the narrower side facing the bale side and the wider side facing the fixing bolt side.



Install the part (4).



Install the plate of (5).



Raise the arm, fit the tip of (1) properly, and fix it with bolts.



Finally, make sure that the parts are installed properly and that the installed line rollers rotate properly.
If there are no problems, the work is complete.