[Avail] Original Short Offset Wrench
Short Offset Wrench
A compact short model has appeared in the popular Avail original offset wrench.
Aluminum alloy (super duralumin)
Colored by alumite processing
Printed by laser processing
The hex size should be 10mm and 11mm(Both Bolt and Nut).
- 10mm : ABU 1500 - 6500, SHIMANO Low-profile models, etc.
- 11mm : ABU 7000, SHIMANO Jigging Baitcasting reel models.
This wrench is special tool to remove handle lock bolt and nut of Avail STi2/STi2.5 Handle and 14 CALCUTTA CONQUEST original handle and so on.
When using a genuine 12 ANTARES handle, the wrench and handle will come into contact.
Be careful not to scratch the handle.
A glasses wrench that combines two sizes, 10 mm on the opposite side and 11 mm on the opposite side.
Since the total length is 55 mm, it can be tightened firmly without applying more force than necessary.
It's not as thin as the wrench that comes with the reel, so it doesn't hurt your hands when you turn it.
The lineup is made by alumite processing.
The original offset wrench is anodized and colored.
Please note that due to the manufacturing method, there may be some color loss in the appearance.
As shown in the photo, there may be some parts that are not colored.
Since the alumite layer is also formed on the part where the color of the base is exposed, there is no need to worry about rust.