[LIVRE] Center Nut Peripheral Parts for BJ & SB Handles (Center Nut, Octagonal Plate, Washer)

*Center Nut Light BJ can be used with both BJ and SB series handles.

BJ Series Handles
The handle of the BJ series is composed of the following parts:

----------------------------------
- Center Nut Light BJ (Common with SB)
　*SHIMANO (M7), DAIWA (M8), DAIWA (B1), and DAIWA (B2)
　*Center Nut Light BJ is available in Red, Blue, Gold, Titanium, and Black.
----------------------------------
- Octagonal Plate A for BJ (Front side)
　*Common for all SHIMANO and DAIWA models

- Octagonal Plate B for BJ (Back side)
　*SHIMANO (M7), DAIWA (M8, B1 common), DAIWA (B2)
----------------------------------
- SUS Washer t0.5 x φ17
　*SHIMANO (M7), DAIWA (M8, B1, B2 common)

- SUS Washer t1.0 x φ17
　*SHIMANO (M7), DAIWA (M8, B1, B2 common)
----------------------------------

	Center Nut	Octagonal Plate A (Front)	Octagonal Plate B (Back)	Adjustment SUS Washer
				1.0 mm	0.5 mm
DAIWA SHIMANO M8	Available for Left and Right Handles Diameter 14.5 mm Hole Diameter 8 mm		Hole Diameter 5 x 8 *The hole angle is different from DAIWA B2	Diameter 17 mm Hole Diameter 5 x 8	Diameter 17 mm Hole Diameter 5 x 8
DAIWA B1	Compatible with both Left and Right Handles Diameter 13 mm Bolt M4 x 10 P0.7
DAIWA B2	Compatible with both Left and Right Handles Diameter 13 mm Bolt M4 x 10 P0.5		Hole Diameter 5 x 8
SHIMANO M7	Available for Left and Right Handles Diameter 13 mm Hole Diameter 7 mm		Hole Diameter 4 x 7	Diameter 17 mm Hole Diameter 4 x 7	Diameter 17 mm Hole Diameter 4 x 7

If you want to change the manufacturer type, you will need the following three parts:
- Center Nut
- Octagonal Plate B for BJ (Back side)
- SUS Washer


SB Series Handles
The nut part of the SB series handles consists of the following parts:

----------------------------------
- Center Nut Light BJ (Common with SB)
　*SHIMANO (M7), DAIWA (M8), DAIWA (B1), and DAIWA (B2)
　*Center Nut Light BJ is available in Red, Blue, Gold, Titanium, and Black.
----------------------------------
- Oval Washer for SB
　*SHIMANO (M7), DAIWA (M8, B1, B2 common)
----------------------------------
- SUS Washer t0.5 x φ17
　*SHIMANO (M7), DAIWA (M8, B1, B2 common)

- SUS Washer t1.0 x φ17
　*SHIMANO (M7), DAIWA (M8, B1, B2 common)
----------------------------------

	Center Nut	Oval Washer	Adjustment SUS Washer
			1.0 mm	0.5 mm
SHIMANO M7	Available for Left and Right Handles Diameter 13 mm Hole Diameter 7 mm	Thickness 2.5 mm	Diameter 17 mm Hole Diameter 4 x 7	Diameter 17 mm Hole Diameter 4 x 7
DAIWA SHIMANO M8	Available for Left and Right Handles Diameter 14.5 mm Hole Diameter 8 mm	Thickness 2.5 mm	Diameter 17 mm Hole Diameter 5 x 8 x 2 pcs	Diameter 17 mm Hole Diameter 5 x 8
DAIWA B1	Compatible with both Left and Right Handles Diameter 13 mm Bolt M4 x 10 P0.7
DAIWA B2	Compatible with both Left and Right Handles Diameter 13 mm Bolt M4 x 10 P0.5

If you want to change the manufacturer type, you will need the following three parts:
- Center Nut
- Oval Washer for SB
- SUS Washer


*Even for SHIMANO reels, larger sizes such as CALCUTTA CONQUEST 300 and 400 and OCEA JIGGER 1000 and above use DAIWA (M8).

*Washers are for adjustment and may not be used in some cases.


*LVHP