[DRESS] reel stand origin Shimano square handle shaft model
Reel stand origin Shimano square handle shaft model
reel stand, when to put the rod on the ground with be attached to the reel,
it is what will prevent that would hurt reel and line.
It does not could lead to line trouble when the line and reel portion is in contact with the ground.
Cause of the trouble it is not possible to reel if there is a reel stand touches the ground will also be eliminated.
You can manage safely lure By hooking the needle to hook keeper of the reel stand origin tip.
In addition, are also equipped with line stopper, it can be held only with no lure or thread of the hook.
The body "Kemihotaru 37" or, since it is possible to insert the "Denkemi IC37 (φ4.5)",
you can use, such as the position confirmation of the reel in the night fishing.
From the slit and the distal end portion of the side, it is custom to the reel with a fantastic atmosphere overflows light of Kemihotaru.
And people you want to prevent from being hurt important reel, is recommended for those who want to fashionable custom!
※ left and right mounting possible.
※Please check the correspondence table with your hand reel.
nylon washers two
Shimano (1000~C5000 series)
- Sefia BB (07,10-11)
- Soare BB / Soare 30 BB (08,11)
, Complex BB (12)
- Aix sense BB (14) (11〜12)
, AR-C Aero BB (14)
, Arutegura (09)
, Arutegura Advance (07,10)
, Nasuki (10,13,16-18)
, Sahara (17-18)
, Sedona (17-18)
, Aorisuta BB (09,13)
depending on the model ※, it might open a gap between the reel body.
※ models not listed in the corresponding table is not tested, or not be installed.
: 1. Remove the handle cap.
2. handle screw CAP spacer to reel stand origin SHIMANO square handle shaft corresponding model,
and attach the same handle cap replaces the waterproof Kyappuyurumi stop.
※ If the reel stand and the reel body interferes from putting the supplied nylon washers to the reel stand threaded portion
handle screw CAP spacer, please replaced the waterproof Kyappuyurumi stop.
※ goods on the reel and rod, Kemihotaru, does not include other parts.
※ metal part is improved corrosion resistance and wear resistance called alumite,
It is colored with a special dyeing method feeling of luxury to take advantage of the sense of metal.
This may result in a texture of color depending on the time production is different.
That point, please note.