[SHIMANO Genuine Product] Line Roller for 17 Vanquish FW, 16 Vanquish (1 pieces)

[SHIMANO Genuine Product] Line Roller for 17 Vanquish FW, 16 Vanquish (1 pieces)

Our Selling Price: US$22.55

Available
Quantity:

◆Description

SHIMANO Genuine Product


This products is SHIMANO original line roller equipped on 17 Vanquish FW, 16 Vanquish.

17 Vanquish FW·16 Vanquish of the line roller, the line roller body and the line roller bearing is integrated by the core protection function equipped you are.
For this reason, if you want to the bearing is worn Replace only way to replace each line roller.
(※ Because of this mechanism, it has become the additional bearing impossible.)

Please use as spare parts when it is the maintenance of the line roller.

Quantity:1


◆Compatibility

・ 17 Vanquish FW
(1000S, 1000SHG,)

・ 16 Vanquish
(1000PGS, C2000S, C2000HGS, C2500HGS, 2500S, 2500HGS, C3000, C3000HG, C3000XG, C3000SDH, 3000HGM, 4000HG, 4000XG)


◆How to install

Since any exchange of genuine line roller has structure is similar, we will explain the 14 STELLA as an example.



First, remove the bolts that secure the line roller.



Please note order not to crush the threads during removal is that it may have been fixed depending on the state of the reel.

※attention


The threads on the type of reel might of minus and Torx.
Please prepare a driver that is suitable for you have the reel.



Part of a total of six points by removing the screws can be removed. .
In this, replace the line roller with a new thing.



After the exchange with a new line roller, we will incorporate the parts in numerical order of the above.



Attach the parts of the first (1).
Since there is a direction to be attached to this part, please go to correctly installed in accordance with the shape.



After installation, please continue to hold the parts as shown in the photo to the working end (1) with a finger.
Please note that when a force is part loose shifts can not be properly installed.



(2) Attach the parts.



(3) Install the line roller body of.

※attention




To the installation of the line roller there is a direction.
Once you look at the side of the line roller, you can see that is different from the width of both sides of the groove.
This width is narrower the veil side, please do the mounting towards wider to the fixing bolt side.



(4) Attach the parts.



(5) Install the plate.



Causing the arm snap the tip of (1), and secure it with bolts.



Finally, whether the installation of the parts is being carried out properly, to see if the installed line roller is properly rotated.
This work is complete if there is no problem.