[SHIMANO] Genuine Line Roller For 16 EXSENCE LB

[SHIMANO] Genuine Line Roller For 16 EXSENCE LB

Our Selling Price: US$23.85 [Regular Price: US$28.05]



◆Product Concept

SHIMANO Genuine Product

Is genuine line roller that is mounted in 16 EXSENCE LB.

16 EXSENCE LB of the line roller, it has been integrated into the line roller body and the line roller bearings by the core protection function mounted.
For this reason, if you want to the bearing is worn Replace only way to replace each line roller.
(※ Because of this mechanism, it has become the additional bearing impossible.)

Please use as spare parts when it is the maintenance of 16 EXSENCE LB.



( C3000MPG, C3000MXG )


Take 14 STELLA as an example.
(the same way of doing for STRADIC)

First, remove the bolts that secure the line roller.

Please note order not to crush the threads during removal is that it may have been fixed depending on the state of the reel.


The threads type will be either Flat head or Torx. Please prepare a screwdriver that is suitable for your reel.

Part of a total of six points by removing the screws can be removed.
In this, replace the line roller with new one.

After the exchange with a new line roller, we will incorporate the parts in numerical order of the above.

Attach the parts of the first (1).
Since there is a direction to be attached to this part, please go to correctly installed in accordance with the shape.

After installation, please continue to hold the parts as shown in the photo to the working end (1) with a finger.
Please note that when a force is part loose shifts can not be properly installed.

Attach the parts (2).

Install the line roller body (3).


As to the installation of the line roller, there is a direction.
Once you look at the side of the line roller, you can see that is different from the width of both sides of the groove. This width is narrower the veil side, please do the mounting towards wider to the fixing bolt side.

Attach the part (4).

Install the plate (5) .

Lift the arm, screw the tip of (1) and fix it.

Finally, whether the installation of the parts is being carried out properly, to see if the installed line roller is properly rotated.
This work is complete if there is no problem.