[DAIWA] Brake Dial Screw TA【TATULA・morethan PE・ZILLION TW】
｜Description of the item
This item is Brake Dial Screw for TATULA, made of duralumin by shaving-out.
It has a beautiful sharp outline which cutting work uniquely can make.
■ZILLION TW - USA -
( 1516P, 1516H, 1516HL, 1516SH )
■TATULA - USA -
( 100HL, 100HSL, 100H, 100HS, 100P )
■TATULA TYPE-R - USA -
( R100H, R100XS, R100HL, R100XSL )
■TATULA HD - USA -
( 200HL, 200HS, 200HSL, 200H )
■ZILLION TW - Japan -
( 1516, 1516L, 1516H, 1516HL, 1516SH, 1516SHL, 1516XXH, 1516XXHL )
■TATULA - Japan -
( 103H-TW, 103HL-TW, 103SH-TW, 103SHL-TW, 103XH-TW, 103XHL-TW )
■morethan PE SV
( 8.1R TW, 8.1L TW )
First turn the Brake dial up to the Max 20.
You will see 2 grooves in the same straight line on the back side of magnetic brake after dialing to the Max.
Then remove the screw that fixes the brake dial.
Should be removed like this.
Take out the E-shaped stopper from the brake dial.
After taking it apart, replace the original one with this new item.
Put the E-shaped stopper back on the new dial screw.
When putting the Brake Dial unit back on the side cover, make sure that the 2 grooves are in the same straight line on the back side of the magnetic brake.
If Clicking-sound Spring and washer come off, place them back as pictured above.
When putting it back, the dial should also be set to the 20.
Here is how to install the dial screw properly.
There is only one position where the Brake Dial fits without wobbling.
Try to find the appropriate position by turning the dial as you push it with a finger.
After fitting tightly, twist the dial pointing to the 20 again.
In the dial 20 position, make sure again that the 2 grooves are in the same straight line as pictured above.
If they are, it's done successfully.
If they are not, remove the dial screw once and try again after setting the 2 grooves rightly.
Your color choice would be the same color as the doughnut-shaped scale.
If doughnut-shaped scale is GOLD, any other colors could match it then.