Spool Case 45S
This multi-case is convenient for storing spare spools, etc.
The screw type height can be adjusted to accommodate a wide range of spools.
- Baitcasting reels
Size 40S: Short spool shaft type of DAIWA, ABU, etc.
Size 40L: Long spool shaft type such as SHIMANO
Bait reels 300 and larger will not fit in 40L
(e.g., 15-16 OCEA CONQUEST 300, etc.)
Use size 55S for 300 and 400 series.
- Spinning reels
(Spools with a larger number than shown in the table here will not fit.
|SHIMANO Spool Number|
|DAIWA Spool Number|
Left: 16 CERTATE 3012 Right: 19 CERTATE LT3000
Please note that the Size may vary even for the same number of reels depending on the year of the reel.
The numbers 40 to 65 in the part number indicate the inner diameter of the case.
If you measure the diameter of your spool, you can find a case where the Size fits just right.
* If a belt or other device is used to hold the line thread on a large spinning reel, the outer diameter may be larger than the spool diameter, so please select a case that is one size larger.
* If you are concerned about the gap inside the case when the spool is placed in the case, cut a commercially available sponge to the appropriate size and lay it inside the case to provide a good cushion.