[DAIWA] 21 CALDIA FC LT1000S,FC LT2000S,FC LT2000S-H,FC LT2500S,LT2500,LT2500S,LT2500S-XH,LT3000-CXH,LT3000,LT3000-XH,LT4000S-C,LT4000-CXH MAX11BB FullBearingKit

[DAIWA] 21 CALDIA FC LT1000S,FC LT2000S,FC LT2000S-H,FC LT2500S,LT2500,LT2500S,LT2500S-XH,LT3000-CXH,LT3000,LT3000-XH,LT4000S-C,LT4000-CXH MAX11BB FullBearingKit

Our Selling Price: US$49.50 - US$68.75

Prices vary according to options.

Type:
Quantity:


Description

The commercial product is the tuning kit, Not the fishing reel.
Please select bearing type.



SHG bearing
The high-sensitive bearing whose rotary performance is terrific is for professional use. The products were carefully selected by hand work from the crowd of other bearings.
The rotational performance is superior to HRCB, and there is no rival for its ultimate smoothness.
This is the bearing to tune up for professional-use. It is very suitable for a high sensitivity reel to challenge by delicate tackle.



HRCB bearing
The new technique that metal itself is hard to get rusty very much by special manufacturing method is adopted.
The bearing is resistance to salt water.
And the derusting performance is more than ten times compared with SHG.
It makes rotation feeling like silky smoothness that's quite unique to HEDGEHOG STUDIO.
That helps tough fishing situation that requires both rotation performance and durability in a high level.
It is the next-generation anti-rust bearings for Salt Water angler.


How to choose bearings

SHG bearing
for freshwater fishing such as Bass/Trout or fishing which
attaches importance to sensitivity by using light weight lures

HRCB bearing
for overall saltwater fishing which attaches importance to anti-rust effect
Although you can use SHG bearing on saltwater fishing, HRCB bearing is
more suitable because of its durability.

It is the Full set of tuning kit consists of.
High-performance bearing / Peculiar parts / instructions
This one is for beginner tuners. We prepare and send all the necessary items.
Please prepare drivers or pliers yourself.


Contents
BB for line roller x 1 pc.
 (SHG-740 or HRCB-740Hi)
BB for handle knob x 2 pcs.
 (SHG-740ZZ or HRCB-740ZHi)
BB for spool support x 1 pc.
 (SHG-1170 or HRCB-1170Hi)
BB for built-in spool x 1 pc.
 (SHG-1060 or HRCB-1160Hi)
Roller Washer x 1 pc
Roller Collar x 1 pc
Roller packing x 1 pc
Hexagonal wrench for spool shaft x 1pc
Tuning Manual


Instructions
for 2 Bearing Line Roller System

Replace the plastic collar inside the 21CALDIA Line Roller Twist Buster II with a bearing size 740.
Use a Phillips screwdriver to remove the screws from the line roller section and take out all the internal parts.
Then replace the parts surrounded by the orange frame with the supplied parts.
The better the rotation of the line roller, the less likely it is that the thread will slip.
It also keeps the thread supple and improves the durability and flying distance.

for Bearing Drag System (Spool Inside Bearing)

If you remove the drag washers from the inside of the 21CALDIA spool, you will see a collar at the far end.
Replacing this collar with a bearing is called a finesse spool drag bearing tune.
By adding a bearing to this part, you can make the rotation of the drag smoother.
It also reduces drag sticking and supports smooth line release.

Tournament Drag Bearing Tune

The plastic ring attached to the spool shaft of the 21CALDIA can be replaced with a bearing to improve the drag performance.
By replacing the plastic ring on the spool shaft with a bearing, the drag can slide out more smoothly.

Handle knob 2BB spec bearing tuned

Replace the two collars in the handle knob of 21CALDIA with bearings.
The reel has a smooth winding feel thanks to the air rotor and high precision tough digital gears.
However, by adding bearings to the handle knob, you can further improve the winding feel and sensitivity.
When you install this kit, do not touch the parts with built-in mag shield.
This is the lower part of the rotor that is marked with the Mag Shield.
Please be assured that the mag shield will not come off during the installation process.
It is easy to reassemble the parts and return the reel to stock condition.


Compatibility

21 CALDIA
FC LT1000S, FC LT2000S, FC LT2000S-H, FC LT2500S, LT2500, LT2500S, LT2500S-XH, LT3000-CXH, LT3000, LT3000-XH, LT4000S-C, LT4000-CXH