Bearing exchange method of Shimano 15 Aldebaran, 16 Stille



In the case of 15 Aldebaran, 16 Stille, unlike the reel up to now, the exchange part of the bearing will be the bearing of the spool shaft and the side cover. (It is part of the arrow.) The bearing replacement of the spool shaft spool bearing remover so you will need, please purchase or rental together.
It should be noted that the bearing replacement of the side cover plate portion will be omitted because it becomes the same manner as in the above-described method .




※ Note


of 15 Aldebaran does not have a spool bearing on the mechanical brake in the knob. Bearing in the back inside of the mechanical brake knob exists, but the bearing of the arrow part Please do not touch that there is no relationship between the current bearing exchange .




Bearing exchange method of the spool shaft portion



There is a bearing on the position of the arrow of the spool shaft portion, but since there is a shaft pin in the exchange of bearings spool bearing remover you used.






First, the spool bearing remover and remove the shaft pin using.
This shaft pin is different is the thickness in the left and right, but there is no problem disconnect from either.
※ spool bearing remover more information on how to use the product page please visit.




And pull out the spool shaft pin can retrieve parts is four points as shown in the photograph.
Here replace the genuine bearing.




We will attach the parts of the extracted four points with a photograph of the order.
The right end of the white plastic is uneven, please note the time of attachment because flat surface will come to the bearing side.
Finally, attach the spool shaft pin again using the spool bearing remover, it is the work completed.