We adopt extra super duralumin plate machined with knob shafts made of titanium alloy (Ti64).
We made it the light weight and high rigidity.
Because the design is simple and not obtrusive too much,
the original image which the reel has is not spoiled very much.
Also the provided screws for fixing the retainer are titanium alloy that has been machined.
・Genuine products of SHIMANO/DAIWA
・AVAIL products * ABU's original knob is not attachable to this handle.
In order to use a SHIMANO genuine knob,
it is necessary to attach the provided plastic collar to the knob shaft.
(It might be a little tight, please install the plastic collar to the bottom of the knob shaft.)
https://www.hedgehog-studio.com/data/troutgeargarage/image/br_002.gif"> For CONQUEST user
In the case of CONQUEST series, Avail Star Drag is necessary to replace with.
Otherwise the handle plate will interfere with the drag lever.
Please purchase Avail Star Drag separately if necessary.
https://www.hedgehog-studio.com/data/troutgeargarage/image/br_002.gif"> Length & Color
3 different length : 80mm / 85mm / 90mm
*The length is the distance between the center of a handle knob shaft and the other one.
https://www.hedgehog-studio.com/data/troutgeargarage/image/br_002.gif"> Retainer : color selection
https://www.hedgehog-studio.com/data/troutgeargarage/image/br_002.gif"> Accessories of the set
1 main unit
2 plastic collars for Shimano knob
1 Ti64 screw (For fixing retainer)
2 Fixing screws for handle knob (+ pan head screw)
6 Adjustment washers
* The handle nut is not provided.
In most cases, SHIMANO original handle nut end cap cannot fit on this custom handle.
We recommend you get the following Nut unless you have one or a similar
If you are not sure if the stock handle nut of your reel fits or not, please contact us.